用铜物理显影的多级放大成像过程Ⅲ.影像中铜和银的分布及明胶对Au3+的还原

本文研究了铜物理显影后影像中铜和银的分布以及在非影像区明胶对Au³⁺的还原作用。铜含量随着影像深度的增加而增加,银含量却随着深度的增加而减少。Ag3d结合能向低值位移说明影像内部的银处于单原子和多原子的混合状态,但是影像表面的银却为单原子状态,如果铜物理显影进行得足够长,铜最终会将银全部遮盖。在这以后的铜物理显影是铜的自催化过程,样片浸入氯金酸溶液中后,非影像区中吸收的氯金酸量大大高于影像区,因而铜的沉积速度在非影像区也比影像区大得多。明胶能还原Au³⁺.还原过程可分为两步:第一步由Au³⁺还原成Au⁺,这一步在室温下是快反应;第二步由Au⁺还原成金,这个反应比较慢,Au⁺和Au在物理显影中可作为催化核,使铜在非影像区沉积。     

多次碰撞条件下金阳离子诱导的甲烷碳―碳偶联

The reactivity of atomic metal cations toward CH₄ has been extensively investigated over the past decades. Closed-shell metal cations in electronically ground states are usually inert with CH₄ under thermal collision conditions because of the extremely high stability of methane. With the elevation of collision energies, closed-shell atomic gold cations (Au⁺) have been reported to react with CH₄ under single-collision conditions to produce AuCH₂⁺, AuH⁺, and AuCH₃⁺ species. Further investigations found that the ion-source-generated AuCH₂⁺ cations can react with CH₄ to synthesize C―C coupling products. These previous studies suggested that new products for the reaction of Au⁺ with CH₄ can be identified under multiple-collision conditions with sufficient collision energies. However, the reported ion-molecule reactions involving methane were usually performed under single- or multiple-collision conditions with thermal collision energies. In this study, a new reactor composed of a drift tube and ion funnel is constructed and coupled with a homemade reflectron time-of-flight mass spectrometer. Laser-ablation-generated Au⁺ ions are injected into the reactor and drift 120 mm to react with methane seeded in the helium drift gas. The reaction products and unreacted Au⁺ ions are focused through the ion funnel and accumulate through a linear ion trap and are then detected by a mass spectrometer. In the reactor, the pressure is approximately 100 Pa, and the electric field between the drift tube and ion funnel can regulate the collision energies between ions and molecules. The reaction of the closed-shell atomic Au⁺ cation with CH₄ is investigated, and the C―C coupling product AuC₂H₄⁺ is observed under multiple-collision conditions with elevated collision energies. Density functional theory calculations are performed to understand the mechanism of the coupling reaction (Au⁺+ 2CH₄ → AuC₂H₄⁺ + 2H₂). Two pathways involving Au―CH₂ and Au―CH₃ species can separately mediate the C―C coupling process. The activation of the second C―H bond in each process requires additional energy to overcome the relatively high barrier (2.07 and 2.29 eV). Ion-trajectory simulations under multiple-collision conditions are then conducted to determine the collisional energy distribution in the reactor. These simulations confirmed that the electric fields between the drift tube and ion funnel could supply sufficient center-of-mass kinetic energies to facilitate the C―C coupling process to form AuC₂H₄⁺. The following catalytic cycle could then be postulated: $\mathrm{AuC}_{2} \mathrm{H}_{4}^{+}+\mathrm{CH}_{4} \stackrel{\Delta}{\longrightarrow} \mathrm{AuCH}_{4}^{+}+\mathrm{C}_{2} \mathrm{H}_{4}, \mathrm{AuCH}_{4}^{+}+\mathrm{CH}_{4} \stackrel{\Delta}{\longrightarrow} \mathrm{AuC}_{2} \mathrm{H}_{4}^{+}+2 \mathrm{H}_{2}$, and $\mathrm{CH}_{4} \stackrel{\mathrm{Au}^{+}, \Delta}{\longrightarrow} \mathrm{C}_{2} \mathrm{H}_{4}+2 \mathrm{H}_{2}$. Thus, this study enriches the chemistry of both gold and methane.     

紫外光辐照下CH3NH3PbI3基钙钛矿太阳能电池失效机制

随着光伏产业的不断发展,有机无机杂化钙钛矿太阳能电池的研发成为科学与工业界广泛关注的焦点。到目前为止,其光电转换效率已经提高到了25.2%,成为替代硅基太阳能电池的核心方案之一。然而,钙钛矿太阳能电池的稳定性较差,容易受到环境中氧气、水分、温度甚至光照的影响,这严重制约了其大规模推广与应用。大量科学研究表明,如何避免紫外辐照下有机无机杂化钙钛矿太阳能电池的性能衰减,对于提高钙钛矿太阳能电池的光照稳定性至关重要。然而到目前为止,仍然没有系统的工作来对紫外辐照下钙钛矿太阳能电池性能以及微结构演化过程进行详细的表征与分析。本文中,我们利用聚焦离子束-扫描电子显微分析(FIB-SEM)以及球差校正透射电子显微分析(TEM)等技术,全面地研究了紫外辐照过程中有机无机杂化钙钛矿太阳能电池性能变化规律以及电池微结构演化特征。实验结果表明,紫外辐照过程中太阳能电池内部会形成0.5–0.6 V的内建电场,钙钛矿中的I^-离子在电场的驱动下向金属Au电极和空穴传输层2, 2’, 7, 7’-四[N, N-二(4-甲氧基苯基)氨基]-9, 9'-螺二芴(Spiro-OMeTAD)一侧迁移;随后,空穴传输层与金电极的界面处,碘离子与光生空穴一起与金电极发生反应,将金属态Au氧化成离子态Au⁺。而Au⁺离子则在内建电场的驱动下反向迁移穿过钙钛矿MAPbI₃层,直接被SnO₂和MAPbI₃界面处的电子还原形成金属Au纳米团簇。除此之外,紫外辐照过程中钙钛矿太阳能电池性能降低的同时,往往伴随着Spiro-OMeTAD与钙钛矿界面处物质迁移、钙钛矿薄膜内晶界展宽以及Au纳米颗粒周围MAPbI₃物相分解等现象。以上各种因素的协同作用,共同导致了紫外光照下有机无机杂化钙钛矿太阳能电池光电转换性能(PCE)、开路电压(V_oc)以及短路电流(J_sc)等性能参数的急剧下降。     

荧光素-层状双金属氢氧化物复合体的发光性能及对Fe3+的荧光识别

采用离子交换法合成了FLN/OS-LDH复合体(FLN: 荧光素, OS: 1-辛烷磺酸钠, LDH: 镁铝型层状双金属氢氧化物), 并研究了其光致发光和对Fe³⁺的识别性能. 固态时, FLN不发光, 而FLN/OS-LDH复合体呈黄绿色荧光(发射波长为565 nm), 是荧光素(FLN)的特征发射光. 在甲酰胺(FM)中可将该复合体方便剥离为胶状悬浮液, 其发射波长发生蓝移, 为绿光发射(531 nm). 研究了复合体剥离液对金属离子的荧光识别特性, 发现其对Fe³⁺的选择性识别能力很强, 远优于其它离子(Mg²⁺, Ni²⁺, Co²⁺, Cu²⁺, Zn²⁺, Pb²⁺, Cd²⁺和Hg²⁺). 该复合体与Fe³⁺结合发生荧光猝灭现象, 可将其用作检测Fe³⁺的荧光传感器. Fe³⁺检测限为1.27×10^-7 mol/L, 猝灭常数(K_sv)为3.44×10² L/mol.     

磁性纳米复合物的制备及对铜离子(Ⅱ)的传感检测

采用化学共沉淀法合成硅包覆的磁性纳米粒子Fe_3O_4@SiO_2,进一步通过六亚甲基二异氰酸酯将吡哆酰肼分子(Pyh)接枝到Fe_3O_4@SiO_2表面,制得功能化的磁性纳米复合物(Fe_3O_4@SiO_2-Pyh)。通过傅里叶变换红外光谱、透射电子显微镜、X射线衍射等技术手段对其结构、形貌和磁性能进行了表征。Fe_3O_4@SiO_2-Pyh粒子具有规则的核壳结构,粒径分布在50~55 nm,壳层厚度约为15 nm。Fe_3O_4@SiO_2-Pyh结构中含有酰腙类活性基团—CO—NH—N=CH—,能与Cu~(2+)形成稳定的配合物,在此基础上采用紫外可见吸收光谱特性建立了测定Cu~(2+)的分析方法,线性范围为3.4×10~(-7)~4.5×10~(-6)mol/L,检出限为1.03×10~(-7)mol/L。此外,利用Fe_3O_4@SiO_2-Pyh良好的磁响应,通过外部磁场能够有效地除去水中过量的铜离子,在环境领域具有潜在的应用价值。     

石墨炉原子吸收法测定硝酸银中的痕量金

卤化银感光材料面世已有一百余年的历史,其基本原材料之一的硝酸银的纯度,对感光材料的感光特性有着不容忽视的影响。国外各著名感光材料厂家对硝酸银中杂质的含量,都有严格的内控标准。但分析方法一般不公开发表。文献上偶见到少量工作^[1-3],一般也非感光材料厂家的实用技术。     

基于金纳米颗粒生长的液晶生物传感器检测酪氨酸

基于酶介导金纳米颗粒(AuNPs)生长构建了液晶生物传感器, 并用于检测酪氨酸(Tyr). 将酪氨酸酶(TR)固定于经戊二醛活化的二甲基十八烷基(3-[三甲氧基硅烷] 丙基)氯化铵/3-氨丙基三乙氧基硅烷(DMOAP/APTES)混合自组装修饰的玻片表面, 当向玻片表面滴加含Tyr的生长溶液时, TR催化Tyr羟基化为左旋多巴(L-Dopa), L-Dopa还原生长溶液中的AuCl₄^-生成AuNPs并沉积于玻片表面, 导致玻片表面地貌发生变化, 这一变化能诱导液晶取向发生变化进而调控透光量, 从而实现对Tyr的检测, 且检测浓度可低至6×10^-7 mol/L.     

Azomethine-H as a Highly Selective Fluorescent Probe for Fe3+ Detection in 100％ Aqueous Solution and Its Application in Living Cell Imaging

A simple assay for the detection of Fe³⁺ in water by means of fluorescence spectroscopy was developed based on a commercially available reagent, Azomethine-H(A-H), allowing sensing trace levels of Fe³⁺ with high selectivity over other cations. A significant fluorescence quenching of A-H at 424 nm was found after its binding with Fe³⁺ in 100% aqueous solution at pH=7.0, while other physiologically relevant metal ions posed little interference. The fluorescence responses can be well described by the modified Stern-Volmer equation. A good linear relationship(R²=0.9904) was observed up to 1.6×10^-5 mol/L Fe³⁺ ions. The detection limit, calculated via the 3σ IUPAC(international union of pure and applied chemistry) criteria, was 1.95×10^-7 mol/L. Moreover, the colorimetric and fluorescent response of A-H to Fe³⁺ can be conveniently detected by the naked eye, providing a facile method for visual detection of Fe³⁺. The proposed method was used to determine Fe³⁺ in water samples. Moreover, inverted fluorescence microscopy imaging using human umbilical vein endothelial cells shows that A-H can be used as an effective fluorescent probe for detecting Fe³⁺ in living cells.     

Disposable amperometric glucose sensor electrode with enzyme-immobilized nitrocellulose strip

Electrochemical properties of screen-printed carbon paste electrodes (CPEs) with a glucose oxidase-immobilized and hexamineruthenium (III) chloride ([Ru(NH₃)₆]³⁺) containing nitrocellulose (NC) strip were examined. The NC strip (2×8 mm) placed on the CPEs printed on polyester (PE) film is tightly sealed using another PE film on the top with open edges on both sides. Samples containing macromolecules and particles (e.g. proteins and blood cells) are applied at one edge of the NC strip and reach the detection area, chromatographically separating small molecules (e.g. glucose, ascorbate, acetaminophen, and uric acid) of analytical interests. Since sample volumes and the amount of catalytic reagents (mediator and glucose oxidase) are precisely predefined by the dimension and pore size (8 μm) of the NC strip, the sensor-to-sensor reproducibility and accuracy of analysis are greatly improved. The use of [Ru(NH₃)₆]³⁺ mediator, which exhibits characteristic substantially lowers the applied potential (0.0 V vs Ag/AgCl) for glucose determination and eliminates the interference from other oxidizable species, providing improved analytical results.     

Synthesis of a di(2-picolyl)amino-β-diketone dual-functional ligand that can coordinate to europium(III) for responding to copper(II) and sulfide ions

Lanthanide complex-based luminescent probes/chemosensors have shown great utilities in various biological and environmental assays with time-resolved detection mode to eliminate background noises. In this work, by conjugating di(2-picolyl)amine (DPA) with a tetradentate β-diketone 1,2-bis[4'- (1",1",1",2",2"-pentafluoro-3",5"-pentanedion-5"-yl)benzyl]-4-chlorosulfo-benzene (BPPBCB), a novel dual-functional ligand that can coordinate to Eu³⁺ for responding to Cu²⁺ and S^2- ions in aqueous media, DPA-BPPBCB, has been designed and synthesized. The β-diketone moiety of DPA-BPPBCB can form a strongly luminescent complex with Eu³⁺. Upon reaction with Cu²⁺, accompanied by the formation of heterobimetallic complex Cu²⁺-DPA-BPPBCB-Eu³⁺, the Eu³⁺ luminescence was quenched. While in the presence of S^2-, owing to the high affinity of S^2- to Cu²⁺, stable CuS was formed, which resulted in the release of Cu²⁺ from Cu²⁺-DPA-BPPBCB-Eu³⁺, to restore the luminescence of the Eu³⁺ complex. This unique “on-off-on” luminescence response of the Eu³⁺ complex enabled Cu²⁺ and S^2- ions in aqueous media to be detected with time-resolved luminescence detection mode.     

Quantitative analysis of fluid inclusions in evaporites by ion chromatography

Natural salt minerals often contain inclusions of saturated salt solutions with diameters from 1 to> 100 μm. With the quantification of the composition of the fluid inclusions, the origin and metamorphism of the salt rocks can be interpreted. Hence, these data are important concerning the long-term safety of underground repositories in salt rocks [1]. For the extraction of the solutions in fluid inclusions with diameters 300 μm, an optical precision instrument was developed. For the simultaneous determination of Cl⁻, Br⁻, SO₄²⁻, Li⁺, Na⁺, K⁺, Mg²⁺ and Ca²⁺ two ion chromatographic systems with conductivity detection for cations and anions and additional photometric detection for Br⁻ were used. To prevent column overload, the Cl concentration must be less than 50 μg/ml in the measuring solution. The extracted samples (volumes> 0.1 μl) are diluted with demineralized water by a factor of 1 · 10⁴ (20-μl sample loops). The practical limit of determination for the measured elements is 0.01–0.3 μg/ml in the measuring solutions. By calculation of the anion and cation charge balance (molar equivalence), a relative error of <5% for the analysis of fluid inclusions was found.     

Enzymatic biosensor for the electrochemical detection of 2,4-dinitrotoluene biodegradation derivatives

In this work, we demonstrate for the first time that 4-methyl-5-nitrocatechol (4M5NC) and 2,4,5-trihydroxytoluene (2,4,5-THT), two compounds obtained from the 2,4-DNT biodegradation are recognized by polyphenol oxidase as substrates. An amperometric biosensor is described for detecting these compounds and for evaluating the efficiency of the 2,4-DNT conversion into 4M5NC in the presence of bacteria able to produce the 2,4-DNT-biotransformation. The biosensor format involves the immobilization of polyphenol oxidase into a composite matrix made of glassy carbon microspheres and mineral oil. The biosensor demonstrated to be highly sensitive for the quantification of 4M5NC and 2,4,5-THT. The analytical parameters for 4M5NC are the following: sensitivity of (7.5 ± 0.1) × 10⁵ nAM⁻¹, linear range between 1.0 × 10⁻⁵ and 8.4 × 10⁻⁵ M, and detection limit of 4.7 × 10⁻⁶ M. The sensitivity for the determination of 2,4,5-THT is (6.2 ± 0.6) × 10⁶ nAM⁻¹, with a linear range between 1.0 × 10⁻⁶ and 5.8 × 10⁻⁶ M, and a detection limit of 2.0 × 10⁻⁷. Under the experimental conditions, it was possible to selectively quantify 4M5NC even in the presence of a large excess of 2,4-DNT. The suitability of the biosensor for detecting the efficiency of 2,4-DNT biotransformation into 4M5NC is demonstrated and compared with HPLC-spectrophotometric detection, with very good correlation. This biosensor holds great promise for decentralized environmental testing of 2,4-DNT.     

铁镍合金催化剂的结构调控及对电化学析氧反应的催化性能

以碳纤维纸(CFP)为基底材料,通过水热生长铁镍前驱体、多巴胺包覆和焙烧转化的方法制备出FeNi合金纳米颗粒@氮掺杂碳(FeNi alloy@NC)复合催化剂.通过改变反应体系中Fe/Ni前驱体的摩尔比可改变合金组成为Fe_0.64Ni_0.36和FeNi)3,同时催化剂微观结构也由纳米管状变为花状团簇以及片层结构.在碱性介质中进行电化学析氧反应测试,发现FeNi₃@NC(1∶3)催化剂表现出了最优的催化活性和稳定性,合金颗粒与NC层的协同相互作用、NC保护层的构建以及催化剂的三维微观立体结构是催化剂性能优异的主要原因.     

A Highly Selective Fluorescent Chemosensor for Cu2+

A new Zn²⁺ probe L2-Zn(L2=naphthofuran carbonylhydrazone derivant) was synthesized as a fluorescence chemosensor for Cu²⁺, by which Cu²⁺ ion could be detected with high selectivity and sensitivity in a wide pH range via a displacement “turn-off” signaling strategy. Whereas the coordination between Zn²⁺ and L2 resulted in a considerable enhancement of typical luminescence of a naphthalofuran group in complex L2-Zn, the addition of Cu²⁺ ion led to a dramatic decrease in the emission intensity of probe L2-Zn at about 503 nm(excitation at 423 nm). The competitive fluorescent experiments showed that other metal ions, such as Hg²⁺, Fe³⁺, Ag⁺, Ca²⁺, Co²⁺, Ni²⁺, Cd²⁺, Pb²⁺, Zn²⁺, Cr³⁺ and Mg²⁺ could not impact the detection of Cu²⁺. The detection limit of the novel probe L2-Zn for Cu²⁺ ion was as low as 2.3×10^-7 mol/L, which is far lower than the guideline value of 1.6×10^-5 mol/L of the United States Environmental Protection Agency.     

Flow injection determination of bismuth in urine by successive retention of Bi(III) and tetrahydroborate(III) on an anion-exchange resin and hydride generation atomic absorption spectrometry

Bismuth as BiCl₄⁻ and BH₄⁻ ware successively retained in a column (150 mm × 4 mm, length × i.d.) packed with Amberlite IRA-410 (strong anion-exchange resin). This was followed by passage of an injected slug of hydrochloric acid resulting in bismuthine generation (BiH₃). BiH₃ was stripped from the eluent solution by the addition of a nitrogen flow and the bulk phases were separated in a gas–liquid separator. Finally, bismutine was atomized in a quartz tube for the subsequent detection of bismuth by atomic absorption spectrometry. Different halide complexes of bismuth (namely, BiBr₄⁻, BiI₄⁻ and BiCl₄⁻) were tested for its pre-concentration, being the chloride complexes which produced the best results. Therefore, a concentration of 0.3 mol l⁻¹ of HCl was added to the samples and calibration solutions. A linear response was obtained between the detection limit (3σ) of 0.225 and 80 μg l⁻¹. The R.S.D.% (n = 10) for a solution containing 50 μg l⁻¹ of Bi was 0.85%. The tolerance of the system to interferences was evaluated by investigating the effect of the following ions: Cu²⁺, Co²⁺, Ni²⁺, Fe³⁺, Cd²⁺, Pb²⁺, Hg²⁺, Zn²⁺, and Mg²⁺. The most severe depression was caused by Hg²⁺, which at 60 mg l⁻¹ caused a 5% depression on the signal. For the other cations, concentrations between 1000 and 10,000 mg l⁻¹ could be tolerated. The system was applied to the determination of Bi in urine of patients under therapy with bismuth subcitrate. The recovery of spikes of 5 and 50 μg l⁻¹ of Bi added to the samples prior to digestion with HNO₃ and H₂O₂ was in satisfactory ranges from 95.0 to 101.0%. The concentrations of bismuth found in six selected samples using this procedure were in good agreement with those obtained by an alternative technique (ETAAS). Finally, the concentration of Bi determined in urine before and after 3 days of treatment were 1.94 ± 1.26 and 9.02 ± 5.82 μg l⁻¹, respectively.     

A Novel Coumarin-based Fluorescence Chemosensor for Fe^3＋

A novel coumarin derivative[7-diethylamino-2-oxo-2H-chromene-3-carboxylic acid（6-amino-pyridin2-yl）-amide,CFe1] has been synthesized and its potential application as a chemosensor for the detection of metal ions has been further investigated.The responses of CFe1 to Fe^3＋ were studied by fluorescence emission spectrometry in the presence of other metal ions such as Al^3＋,Ba^2＋,Ca^2＋,Co^3＋,Cr^3＋,Cu^2＋,Fe^2＋,Hg^2＋,Mg^2＋,Mn^2＋,Na^＋,Ni^＋,Pb^2＋,Zn^2＋,K^＋,and Ag^＋.CFe1 showed a good selectivity for Fe^3＋ with fast response,a wide pH span of 3.3-9.18,and a large Stocks shift.CFe1 in the presence of Fe^3＋ and ethylene diamine tetraacetic acid（EDTA） makes the blue solution fade to colorless,which is due to the formation of CFe1-Fe^3＋ complex instead of any catalytic action of Fe^3＋.Furthermore,the imaging of Fe^3＋ in cultured single mice microglia cells was realized with the aid of CFe1,indicating that CFe1 has a great potential to be used as promising models for the future design of novel and robust chemosensor for metal ion detection in the field of biomedical and environmental analyses.     

Determination of adenosine disodium triphosphate using prulifloxacin-terbium(III) as a fluorescence probe by spectrofluorimetry

A new spectrofluorimetric method is developed for determination of adenosine disodium triphosphate (ATP). The interactions between prulifloxacin (PUFX)–Tb³⁺ complex and adenosine disodium triphosphate has been studied by using UV–vis absorption and fluorescence spectra. Using prulifloxacin–Tb³⁺ as a fluorescence probe, under the optimum conditions, ATP can remarkably enhance the fluorescence intensity of the prulifloxacin–Tb³⁺ complex at λ = 545 nm and the enhanced fluorescence intensity is in proportion to the concentration of ATP. Optimum conditions for the determination of ATP were also investigated. The dynamic range for the determination of ATP is 4.0 × 10⁻⁷ to 2.0 × 10⁻⁵ mol L⁻¹, and the detection limit (3 σ/k) is 1.7 × 10⁻⁸ mol L⁻¹. This method is simple, practical and relatively free interference from coexisting substances and can be successfully applied to determination of ATP in real pharmaceutical samples. The mechanism of fluorescence enhancement of prulifloxacin–Tb³⁺ complex by ATP was also discussed.     

Separation and detection of common mono- and divalent cations by ion chromatography with an ODS column and conductivity/UV detection

The retention and detection behavior of common mono- and divalent cations (M⁺, alkali metal (Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺) and ammonium ions (NH₄⁺); M²⁺, alkaline earth metal ions (Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺) was examined using an ODS column (150×4.6 mm I.D.) and conductivity (CD)/UV detection. The results obtained were as follows: (1) for M⁺, the mobile phase, 0.1 mM sodium dodecyl sulphate (SDS)+10 mM HNO₃ and indirect CD detection were effective. (2) Addition of Ce(III) in the mobile phase accelerated the elution of both M⁺ and M²⁺. The separation of above 10 cations on an ODS column was achieved for the first time without any coelution of cations and disturbance by system peak. Addition of higher SDS resulted in good separation of M⁺ and M²⁺ with longer retention times. CD detection was possible for M⁺ and M²⁺ and UV detection for M²⁺. (3) For M²⁺, the mobile phase, 0.8 mM Ce(III)+0.1 mM SDS+1 mM HNO₃ and indirect UV detection were effective. The IC methods were applied to real samples.     

Electrochemical study and flow-injection amperometric detection of trace NO(2)(-) at CuPtCl(6) chemically modified electrode

A thin film of mixed-valent CuPtCl₆ is deposited on a glassy carbon electrode by continuous cyclic scanning in a solution containing 3×10⁻³ M CuCl₂+3×10⁻³ M K₂PtCl₆+1 M KCl in the potential range from 700 to −800 mV. The cyclic voltammetry is used to study the electrochemical behaviors of nitrite on CuPtCl₆/GC modified electrode and the electrode displays a good catalytic activity toward the oxidation of nitrite. The effects of the film thickness, pH, the electrode stability and precision have been evaluated. Experiments in flow-injection analysis are performed to characterize the electrode as an amperometric sensor for the detection of nitrite. The modified electrode shows a wide dynamic range, quite a low detection limit and short response time. The linear relationship between the flow-injection peak currents and the concentrations of nitrite is at a range of 1×10⁻⁷–2×10⁻³ M with a detection limit of 5×10⁻⁸ M.     

通过Bi3+发光特征判定“争议”格位——以Ca2MgSi2O7:Bi3+荧光粉为例

在以往的研究工作中,人们经常关注给定基质具有多个格位所对应多发光中心的光致发射。 取决于所掺杂的基质,多个格位的晶体化合物应该可以提供相应的多发光中心,但某些化合物有时只会表现一个发光中心,由此产生“争议性”发光中心。 据以往研究,以稀土离子掺杂而为人所知的经典镁黄长石(Ca₂MgSi₂O₇)长余辉化合物具有“争议性”Ca格位。 为此,在本文中以非稀土离子(Bi³⁺)特有的发光特性从侧面来研究Ca₂MgSi₂O₇化合物中的“争议性”Ca格位问题。 结果表明,在250和276 nm激发波长激发下,所有的Bi³⁺掺杂Ca₂MgSi₂O₇样品均有峰位位于582和350 nm的两个Bi³⁺特征发射带。结合晶体结构分析,光谱结果表明,Ca₂MgSi₂O₇:Bi³⁺荧光粉具有对应于六配位和八配位的两个不同Ca²⁺格位的两个Bi³⁺发光中心,即,Bi³⁺(Ⅰ)(~582 nm)和Bi³⁺(Ⅱ)(~350 nm)发光中心。 此外,光谱分析进一步表明,Bi³⁺(Ⅰ)与Bi³⁺(Ⅱ)具有单向的能量传递,而且,发现这两个发光中心所对应的相对发射强度是依赖于激发波长和Bi³⁺掺杂浓度。 实验证明了Ca₂MgSi₂O₇晶体化合物具有两个Ca格位,而不是有些工作中所讨论的一个Ca格位。 本文工作可以为已知或未知的具有“争议性”格位的晶体化合物的验证提供新的借鉴。