Semi‐Locked Tetrathienylethene as a Building Block for Hole‐Transporting Materials: Toward Efficient and Stable Perovskite Solar Cells

The construction of state‐of‐the‐art hole‐transporting materials (HTMs) is challenging regarding the appropriate molecular configuration for simultaneously achieving high morphology uniformity and charge mobility, especially because of the lack of appropriate building blocks. Herein a semi‐locked tetrathienylethene (TTE) serves as a promising building block for HTMs by fine‐tuning molecular planarity. Upon incorporation of four triphenylamine groups, the resulting TTE represents the first hybrid orthogonal and planar conformation, thus leading to the desirable electronic and morphological properties in perovskite solar cells (PSCs). Owing to its high hole mobility, deep lying HOMO level, and excellent thin film quality, the dopant‐free TTE‐based PSCs exhibit a very promising efficiency of over 20 % with long‐term stability, achieving to date the best performances among dopant‐free HTM‐based planar n‐i‐p structured PSCs.     

Emerging of Inorganic Hole Transporting Materials For Perovskite Solar Cells

Hole transporting material (HTM) is a significant component to achieve the high performance perovskite solar cells (PSCs). Over the years, inorganic, organic and hybrid (organic‐inorganic) material based HTMs have been developed and investigated successfully. Today, perovskite solar cells achieved the efficiency of 22.1 % with with 2,2’,7,7’‐tetrakis(N,N‐di‐p‐methoxyphenyl‐amine) 9,9‐spirobifluorene (spiro‐OMeTAD) as HTM. Nevertheless, synthesis and cost of organic HTMs is a major challenging issue and therefore alternative materials are required. From the past few years, inorganic HTMs showed large improvement in power conversion efficiency (PCE) and stability. Recently CuO_x reached the PCE of 19.0% with better stability. These developments affirms that inorganic HTMs are better alternativesto the organic HTMs for next generation PSCs. In this report, we mainly focussed on the recent advances of inorganic and hybrid HTMs for PSCs and highlighted the efficiency and stability of PSCs improved by changing metal oxides as HTMs. Consequently, we expect that energy levels of these inorganic HTMs matches very well with the valence band of perovskites and improved efficiency helps in future practical deployment of low cost PSCs.     

Low-cost Cu-based inorganic hole transporting materials in perovskite solar cells: Recent progress and state-of-art developments

Perovskite solar cells (PSCs) are rapidly approaching as promising processes toward efficient energy harvesting technologies. High cost and low environmentally stable organic hole transporting materials (HTMs) are the main hurdles in their commercial realization. Perovskite community is actively looking for inorganic HTMs which will potentially yield into a pragmatic solution. Cu-based materials, e.g. Cu-based oxides, halides, and chalcogenides exhibit features like low production cost, suitable band alignment, and high hole mobility Due to these properties, Cu-based materials are being explored as potential HTMs in PSCs. Significant efforts are contributed toward using low-cost Cu-based materials because of high chemical stability, high carrier mobility, low-cost and the possibility of developing a very simple technique. The photo-physical properties, e.g. optical electronic structure, valence band engineering, and carrier mobility are briefly discussed. Detailed insights toward understanding the development of Cu-based HTMs along with their possible pragmatic commercialization aspects are presented. This article highlights the utilization of Cu-based chalcogenide HTM and role of ternary Cu-based chalcopyrite, Pnma ternary chalcogenides, sulvanite and oxychalcogenides in the field of PSC with a brief idea about tailoring their optoelectronic properties. This article will significantly help the community toward the engineering of novel Cu-based HTMs for possible commercialization of PSC technology.     

Inorganic p-type semiconductors and carbon materials based hole transport materials for perovskite solar cells

Incorporation of proper inorganic p-type semiconductors as hole transport layer has great potential to increase long-term stability while maintaining high power conversion efficiency of perovskite solar cells with low material cost.     

Direct C−H Arylation Meets Perovskite Solar Cells: Tin‐Free Synthesis Shortcut to High‐Performance Hole‐Transporting Materials

In contrast to the traditional multistep synthesis, we demonstrate herein a two‐step synthesis shortcut to triphenylamine‐based hole‐transporting materials (HTMs) through sequential direct C?H arylations. These hole‐transporting molecules are fabricated in perovskite‐based solar cells (PSCs) that exhibit promising efficiencies up to 17.69 %, which is comparable to PSCs utilizing commercially available 2,2′,7,7′‐tetrakis[N,N‐di(4‐methoxyphenyl)amino]‐9,9′‐spirobifluorene (spiro‐OMeTAD) as the HTM. This is the first report describing the use of step‐saving C?H activations/arylations in the facile synthesis of small‐molecule HTMs for perovskite solar cells.     

有机空穴传输材料在钙钛矿太阳电池中的应用

有机-无机杂化钙钛矿太阳电池(PSCs)由于其诸多优点得到广泛关注,而有机固态空穴传输材料(HTMs)代替液体电解质使其得到飞速的发展,提升了电池的效率和稳定性,已经成为PSCs的重要组成部分。目前应用于PSCs的空穴传输材料分为有机空穴传输材料和无机空穴传输材料两大类。无机空穴传输材料的可选择范围较窄,对应器件的光电转换效率相对较低。开发各类能级匹配、空穴迁移率高的有机空穴传输材料是提高器件效率和稳定性的有效手段,成为相关领域的研究热点。本文依据相对分子质量的大小,将应用于PSCs中的有机空穴传输材料分为小分子类和聚合物类空穴传输材料,详细评述了有机空穴传输材料分子结构对PSCs光电转换效率、填充因子、开路电压、短路电流和稳定性的影响,并对其能级、空穴迁移率的高低、添加剂的使用等进行了讨论。最后详细论述了有机空穴传输材料未来的研究重点和发展趋势。     

Conjugated Polymers as Hole Transporting Materials for Solar Cells

In principle, conjugated polymers can work as electron donors and thus as low-cost p-type organic semiconductors to transport holes in photovoltaic devices. With the booming interests in high-efficiency and low-cost solar cells to tackle global climate change and energy shortage, hole transporting materials(HTMs) based on conjugated polymers have received increasing attention in the past decade. In this perspective, recent advances in HTMs for a range of photovoltaic devices including dye-sensitized solar cells(DSSCs), perovskite solar cells(PSCs),and silicon(Si)/organic heterojunction solar cells(HSCs) are summarized and perspectives on their future development are also presented.     

Positional Effect of the Triphenylamine Group on the Optical and Charge‐Transfer Properties of Thiophene‐Based Hole‐Transporting Materials

Hybrid organic‐inorganic perovskite solar cells (PSCs) have shown significant potential for use in the energy field. Typically, hole‐transporting materials (HTMs) play an important role in affecting the power conversion efficiency (PCE) of PSCs. A deep understanding of the structure‐property relationship plays a vital role in developing efficient HTMs. Herein, the relationship between the structure and properties of two small organic HTMs H2,5 and H3,4 were systematically investigated in terms of the electronic and optical properties, the hole‐transporting behavior by using density functional theory (DFT) and Marcus electron transfer theory. The results demonstrated that the high power conversion efficiency of the H2,5‐ based PSC was caused by strong interactions with the perovskite material on the interface and an enhanced hole mobility in H2,5 compared with H3,4 . The strong interaction derives from the short bond length of O atom of HTM and Pb atom of perovskite material, and the highly hole mobility derives from the quasi‐planar conjugated conformation and tight packing model of neighboring molecules in H2,5 . In addition, we found that the planar structure enhances the intermolecular interaction between HTM and perovskite materials compared with the ′V′‐shaped molecule. Importantly, we also note that the HOMO level of the isolated molecule is not always proportional to the open‐circuit voltages of PSCs since the HOMO level might move toward a higher level when the interaction between HTM and interface of perovskite was included. The work gives essential information for rational designing efficient HTMs.     

The impact of regiochemistry of conjugated molecules on the performance of organic electronic devices

Organic photovoltaics and field-effect transistors have attracted considerable attention due to the easy fabrication,low cost,light weight,and flexibility.Unsymmetrical conjugated building blocks are widely utilized for the design of new organic π-functional materials in order to achieve high-performance electronic devices,which has become a hot research topic in recent years.In this review,we summarized some typical organic π-functional materials with regioregular conjugated backbones with unsymmetrical electron-deficiency moieties and focused on the influence of regiochemistry on the final device performance.     

Recent advances in the design of dopant-free hole transporting materials for highly efficient perovskite solar cells

This review gives an overview of the latest advances in dopant-free hole transporting materials (HTMs) for perovskite solar cells and discusses the new molecular design strategies towards efficient and stable dopant-free HTMs.     

Indeno[1,2‐b]carbazole as Methoxy‐Free Donor Group: Constructing Efficient and Stable Hole‐Transporting Materials for Perovskite Solar Cells

With perovskite‐based solar cells (PSCs) now reaching efficiencies of greater than 20 %, the stability of PSC devices has become a critical challenge for commercialization. However, most efficient hole‐transporting materials (HTMs) thus far still rely on the state‐of‐the‐art methoxy triphenylamine (MOTPA) donor unit in which methoxy groups usually reduce the device stability. Herein, a carbazole‐fluorene hybrid has been employed as a methoxy‐free donor to construct organic HTMs. The indeno[1,2‐b]carbazole group not only inherits the characteristics of carbazole and fluorene, but also exhibits additional advantages arising from the bulky planar structure. Consequently, M129, endowed with indeno[1,2‐b]carbazole simultaneously exhibits a promising efficiency of over 20 % and superior long‐term stability. The hybrid strategy toward the methoxy‐free donor opens a new avenue for developing efficient and stable HTMs.     

Efficient perovskite solar cells employing a solution-processable copper phthalocyanine as a hole-transporting material

The development of alternative low-cost and high-performing hole-transporting materials(HTMs) is of great significance for the potential large-scale application of perovskite solar cells(PSCs) in the future.Here,a facilely synthesized solution-processable copper tetra-(2,4-dimethyl-3-pentoxy) phthalocyanine(CuPc-DMP) via only two simple steps,has been incorporated as a hole-transporting material(HTM) in mesoscopic perovskite solar cells(PSCs).The optimized devices based on such a HTM afford a very competitive power conversion efficiency(PCE) of up to 17.1%measured at 100 mW cm~(-2) AM 1.5G irradiation,which is on par with that of the well-known 2,2',7,7'-tetrakis(N'N'-di-p-methoxyphenylamine)-9,9'-spirobifluorene(spiro-OMeTAD)(16.7%) under equivalent conditions.This is,to the best of our knowledge,the highest value reported so far for metal organic complex-based HTMs in PSCs.The advantages of this HTM observed,such as facile synthetic procedure,superior hole transport characteristic,high photovoltaic performance together with the feasibility of tailoring the molecular structure would make solution-processable copper phthalocyanines as a class of promising HTM that can be further explored in PSCs.The present finding highlights the potential application of solution processed metal organic complexes as HTMs for cost-effective and high-performing PSCs.     

Inexpensive Hole‐Transporting Materials Derived from Tröger's Base Afford Efficient and Stable Perovskite Solar Cells

The synthesis of three enamine hole‐transporting materials (HTMs) based on Tröger's base scaffold are reported. These compounds are obtained in a three‐step facile synthesis from commercially available materials without the need of expensive catalysts, inert conditions or time‐consuming purification steps. The best performing material, HTM3, demonstrated 18.62 % PCE in PSCs, rivaling spiro‐OMeTAD in efficiency, and showing markedly superior long‐term stability in non‐encapsulated devices. In dopant‐free PSCs, HTM3 outperformed spiro‐OMeTAD by a factror of 1.6. The high glass‐transition temperature (T_g=176 °C) of HTM3 also suggests promising perspectives in device applications.     

钙钛矿太阳能电池电子传输层的制备及应用

目前,有机-无机杂化钙钛矿太阳能电池(PSC)的器件效率已经超过25％.电子传输层作为PSC中的重要组成部分在提取和传输光生电子,阻挡空穴,修饰界面,调节界面能级和减少电荷复合等方面起着关键作用.无机n型材料,例如TiO2、ZnO、SnO2和其他金属氧化物材料具有成本低和稳定性好的特点,经常在传统PSC中被用作电子传输...     

Dendritic-Like Molecules Built on a Pillar[5]arene Core as Hole Transporting Materials for Perovskite Solar Cells

Multi-branched molecules have recently demonstrated interesting behaviour as charge-transporting materials within the fields of perovskite solar cells (PSCs). For this reason, extended triarylamine dendrons have been grafted onto a pillar[5]arene core to generate dendrimer-like compounds, which have been used as hole-transporting materials (HTMs) for PSCs. The performances of the solar cells containing these novel compounds have been extensively investigated. Interestingly, a positive dendritic effect has been evidenced as the hole transporting properties are improved when going from the first to the second-generation compound. The stability of the devices based on the best performing pillar[5]arene material has been also evaluated in a high-throughput ageing setup for 500 h at high temperature. When compared to reference devices prepared from spiro-OMeTAD, the behaviour is similar. An analysis of the economic advantages arising from the use of the pillar[5]arene-based material revealed however that our pillar[5]arene-based material is cheaper than the reference.     

3,4‐Phenylenedioxythiophene (PheDOT) Based Hole‐Transporting Materials for Perovskite Solar Cells

Two new electron‐rich molecules based on 3,4‐phenylenedioxythiophene (PheDOT) were synthesized and successfully adopted as hole‐transporting materials (HTMs) in perovskite solar cells (PSCs). X‐ray diffraction, absorption spectra, photoluminescence spectra, electrochemical properties, thermal stabilities, hole mobilities, conductivities, and photovoltaic parameters of PSCs based on these two HTMs were compared with each other. By introducing methoxy substituents into the main skeleton, the energy levels of PheDOT‐core HTM were tuned to match with the perovskite, and its hole mobility was also improved (1.33×10^?4 cm² V^?1 s^?1, being higher than that of spiro‐OMeTAD, 2.34×10^?5 cm² V^?1 s^?1). The PSC based on MeO‐PheDOT as HTM exhibits a short‐circuit current density (J_sc) of 18.31 mA cm^?2, an open‐circuit potential (V_oc) of 0.914 V, and a fill factor (FF) of 0.636, yielding an encouraging power conversion efficiency (PCE) of 10.64 % under AM 1.5G illumination. These results give some insight into how the molecular structures of HTMs affect their performances and pave the way for developing high‐efficiency and low‐cost HTMs for PSCs.     

Benzothieno[3,2-b]thiophene-Based Noncovalent Conformational Lock Achieves Perovskite Solar Cells with Efficiency over 24 %

Organic semiconductors with noncovalently conformational locks (OSNCs) are promising building blocks for hole-transporting materials (HTMs). However, lack of satisfied neighboring building blocks negatively impacts the optoelectronic properties of OSNCs-based HTMs and imperils the stability of perovskite solar cells (PSCs). To address this limitation, we introduce the benzothieno[3,2-b]thiophene (BTT) to construct a new OSNC, and the resulting HTM ZS13 shows improved intermolecular charge extraction/transport properties, proper energy level, efficient surface passivation effect. Consequently, the champion devices based on doped ZS13 yield an efficiency of 24.39 % and 20.95 % for aperture areas of 0.1 and 1.01 cm², respectively. Furthermore, ZS13 shows good thermal stability and the capability of inhibiting I⁻ ion migration, thus, leading to enhanced device stability. The success in neighboring-group engineering can triggered a strong interest in developing thienoacene-based OSNCs toward efficient and stable PSCs.     

Tuning Hole Transport Properties via Pyrrole Derivation for High-Performance Perovskite Solar Cells

Hole transport materials (HTMs) with high hole mobility, good band alignment and ease of fabrication are highly desirable for perovskite solar cells (PSCs). Here, we designed and synthesized novel organic HTMs, named T3, which can be synthesized in high yields with commercially available materials, featuring a substituted pyrrole core and triphenylamine peripheral arms. The capability of functionalization in the final synthetic step provides an efficient way to obtain a variety of T3-based HTMs with tunable energy levels and other properties. Among them, fluorine-substituted T3 (T3-F) exhibits the best band alignment and hole extraction properties, leading to PSCs with outstanding PCEs of 24.85 % and 24.03 % (certified 23.46 %) for aperture areas of 0.1 and 1 cm², respectively. The simple structure and tunable performance of T3 can inspire further optimization for efficient PSCs.     

Promising hole-transporting materials for perovskite solar cells: Modulation of the electron-deficient units in triphenylamine derivative-based molecules

Modulation of the electron-deficient π-bridge units in 4-methoxy-N-(4-methoxyphenyl)-N-phenylbenzenamine (MeTPA)-based hole-transporting materials (HTMs) is a significant approach to improve hole mobility of HTMs for perovskite solar cells (PSCs). In this study, a class of simple MeTPA-based HTMs (H1-H4) with different π-bridged electron-deficient units were designed for the purpose of providing a theoretical model to obtain potential MeTPA-based HTMs. The results indicated that H2 to H4 exhibit better performance, such as larger Stokes shifts, smaller exciton-binding energy, better stability, good solubility, and higher hole mobility, in comparison with the parental material H1. H2 to H4 materials with high hole mobility (5.45 × 10⁻⁴, 2.70 × 10⁻¹, and 3.99 × 10⁻³ cm² V⁻¹ second⁻¹, respectively) may embody promising HTMs to yield good performance in PSCs. Therefore, the useful information obtained regarding control of the electron-deficient π-bridge units of MeTPA-based HTMs is an effective way to obtain excellent HTMs for PSC applications.     

Perovskite solar cells: Thermal and chemical stability improvement,and economic analysis

Perovskite solar cells (PSCs) are highly efficient and are comparatively cheaper than the large silicon crystals primarily used in solar cells. Their outstanding photovoltaic performance makes them a potential alternative to silicon solar cells. While efficiency and photovoltaic performance have been investigated in recent decades, a knowledge gap on the degradation, economic feasibility and stability of PSCs exists, and their poor stability remains a barrier to commercialization. Thus, this review aims to fill this knowledge gap by focusing on approaches to improve PSCs’ thermal and chemical stability, and their economic viability under different conditions. The structure and manufacture of PSCs are also discussed along with an economic analysis of different perovskite devices. Improvements in thermal stability can be reached by incorporating inorganic materials into the PSC. A PSC model optimized with ZnO improves chemical stability by 8% and works well under low temperatures. To make PSCs more economically feasible, certain parts like counter electrodes (CE) and hole transport materials (HTMs) can be replaced with alternative elements like carbon and inorganic HTMs, respectively. PSCs with long durability and high conversion efficiency will expand the commercial prospects for this material. To bridge the lack of knowledge, further investigation is required on the sustainability and longevity of PSCs.