Role of the dispersion route on the phase transformation of a nano-crystalline transition alumina

De-agglomeration of a nanocrystalline transition alumina powder was performed in distilled water at its natural pH under magnetic stirring for 170 h or by ball milling for 3 h. Gibbsite appeared near transition aluminas in the magnetic stirred sample. In addition, a relevant lowering of the α-Al₂O₃ crystallization temperature was observed in the dispersed materials with respect to the as-received powder. However, the activation energy of the above transformation, determined by the Kissinger method, was in any case about 480–500 kJ/mol and unaffected by the dispersion route. On the contrary, it was reduced of about 10% in α-alumina seeded samples, obtained by flash plunging the powders at 1,290 °C for 10 min.     

Oxidation polymerization of a charge‐transfer complex of 2,6‐bis(2‐thienyl)‐1,4‐dithiafulvene with 7,7,8,8‐tetracyanoquinodimethane

A π‐conjugated poly(α‐dithienylen‐dithiafulvene) ( 2 ) was obtained by the oxidation polymerization of 2,6‐bis(2‐thienyl)‐1,4‐dithiafulvene ( 1 ) as a dithiafulvene monomer derived from 4‐(2‐thienyl)‐1,2,3‐thiadiazole. When a solution of 1 in CHCl₃ was added to a stirred solution of FeCl₃ in CHCl₃, only the low‐molecular‐weight product 2 was obtained. The mixture was stirred for 15 h with an N₂ flow. The polymerization at higher temperatures resulted in polymers with large insoluble fractions. A higher molecular weight polymer was obtained by the oxidation polymerization of a charge‐transfer complex of 1 with 7,7,8,8‐tetracyanoquinodimethane (compound 3 ). In contrast to 2 , polymer 4 was readily soluble in dimethyl sulfoxide, dimethylformamide, and acetone and partially soluble in tetrahydrofuran and methanol and had a larger molecular weight (peak top molecular weight = 37,000). The conductivity of polymer 4 was 3 orders of magnitude larger than that of polymer 2 . © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6592–6598, 2005     

Ex Vitro Expansion of Human Placenta-Derived Mesenchymal Stem Cells in Stirred Bioreactor

The high demand of human placenta-derived mesenchymal stem cells (hPDMSCs) for therapeutic applications requires reproducible production of large numbers of well-characterized cells under well-controlled conditions. However, no method for fast hPDMSCs proliferation has yet been reported. In the present study, the feasibility of using a stirred bioreactor system to expand hPDMSCs was examined. hPDMSCs were cultured either in stirred bioreactors or in tissue culture flasks (T-flasks) for 5 days. Total cell density and several parameters of physical microenvironments were monitored in the two culture systems every 24 h. The maintenance of the antigenic phenotype of hPDMSCs before and after culturing in the stirred bioreactor system was cytometrically assessed. Data suggested that the physical microenvironment in the stirred bioreactors was much more favorable than that of the T-flasks. At the end of 144 h culturing, the total cell number was increased 1.73 times from the T-flasks to the stirred bioreactors. In addition, hPDMSCs could maintain their antigenic phenotype when cultured in stirred bioreactors. These results provide the initial assessment for large-scale hPDMSCs production using suspension culture bioreactors.     

Preparation of <Superscript>95m</Superscript>Tc radiotracer

Several procedures for preparation of the ^95mTc radiotracer following irradiation of a thin Mo target with deuterons were tested. The procedures consisting of alkaline-oxidative fusion of the irradiated target in a mixture of Na₂O₂ + NaOH and subsequent liquid–liquid extraction with 2-butanone, and acid decomposition of the target in a mixture of H₂SO₄ + HNO₃ followed by extraction chromatography with PAN-Aliquat 336 composite material appeared suitable for the given purpose.     

Synthesis and characterization of porous WO3–SnO2 nanomaterials: An infrared study of adsorbed pyridine and dimethyl methylphosphonate

High surface area porous W/Sn oxide nanomaterials were prepared via water/oil based (W/O) emulsion. Tungstic acid solution was generated by cation exchange of sodium tungstate in acidic Dowex resin. The acid was then mixed with a clear homogeneous aqueous N-cetyl trimethyl ammonium bromide (CTAB) solution followed by a slow addition of 0.2 M SnCl₄ solution. The mixture was stirred for 24 h and then subjected to slow calcination at 500 °C. The prepared materials were characterized using SEM-EDX, BET surface area, and sorption of nitrogen and water. Fourier transform infrared spectroscopy (FTIR) was used to characterize the surface acidic properties using pyridine vapor as a probe. The materials were then tested toward the Dimethyl methylphosphonate (DMMP) adsorption at various temperatures using infrared spectroscopy. At elevated temperatures, the desorption of DMMP from WO₃ and SnO₂ surfaces results in forming methyl phosphonate that strongly bounds on the metal oxide surfaces. In contrast, the FTIR spectra showed that the adsorbed dimethyl methylphosphonate (DMMP) on the mixed W/Sn oxide powders can be molecularly desorbed without any decomposition.     

Photodynamic Mechanisms induced by a Combination of Hypericin and a Chlorin Based‐Photosensitizer in Head and Neck Squamous Cell Carcinoma Cells

The aim of this study was to elucidate photodynamic therapy (PDT) effects mediated by hypericin and a liposomal meso‐tetrahydroxyphenyl chlorin (mTHPC) derivative, with focus on their 1:1 mixture, on head and neck squamous cell carcinoma cell lines. Absorption, excitation and photobleaching were monitored using fluorescence spectrometry, showing the same spectral patterns for the mixture as measured for single photosensitizers. In the mixture mTHPC showed a prolonged photo‐stability. Singlet oxygen yield for light‐activated mTHPC was Φ_Δ = 0.66, for hypericin Φ_Δ = 0.25 and for the mixture Φ_Δ = ~0.4. A linear increase of singlet oxygen yield for mTHPC and the mixture was found, whereas hypericin achieved saturation after 35 min. Reactive oxygen species fluorescence was only visible after hypericin and mixture‐induced PDT. Cell viability was also more affected with these two treatment options under the selected conditions. Examination of death pathways showed that hypericin‐mediated cell death was apoptotic, with mTHPC necrotic and the 1:1 mixture showed features of both. Changes in gene expression after PDT indicated strong up‐regulation of selected heat‐shock proteins. The application of photosensitizer mixtures with the features of reduced dark toxicity and combined apoptotic and necrotic cell death may be beneficial in clinical PDT. This will be the focus of our future investigations.     

Diastereoselective amidoallylation of glyoxylic acid with chiral tert-butanesulfinamide and allylboronic acid pinacol esters: efficient synthesis of optically active γ,δ-unsaturated α-amino acids

A convenient synthesis of δ,γ-unsaturated amino acids has been developed. After a mixture of (R)-tert-butanesulfinamide and glyoxylic acid with molecular sieves in CH₂Cl₂ was stirred for 42 h at room temperature, allylboronic acid pinacol ester was added to the mixture to give (R)-2-((R)-tert-butanesulfinamido)pent-4-enoic acid with high diastereoselectivity. The corresponding reaction of (Z)-crotylboronic acid pinacol ester produced no product; however, that of (E)-crotylboronic acid pinacol ester produced (2R,3S)-2-((R)-tert-butylsulfinamido)-3-methylpent-4-enoic acid with excellent diastereoselectivity.     

Bimetallic Ni–Co‐based metal–organic framework: An open metal site adsorbent for enhancing CO2 capture

An open metal site framework named UTSA‐16 was synthesized and modified as a high‐capacity adsorbent for reversible CO₂ capture. Partial substitution of intrinsic Co²⁺ sites of UTSA‐16 with Ni²⁺ centres was realized in the molar composition range 0–75% Ni with the aim of increasing CO₂ uptake. Synthesized bimetallic Nix‐UTSA‐16 (x = 0, 20, 50, 75) materials were characterized using various techniques to assess the influence of chemical composition on CO₂ binding affinity and any subsequent physical change in morphology, crystal size and porosity on the total uptake. Experimental isotherm adsorption studies showed the following trend for CO₂ adsorption capacity employing the Nix‐UTSA‐16 series: Ni20‐UTSA‐16 > UTSA‐16 > Ni50‐UTSA‐16 > Ni75‐UTSA‐16. According to the dynamic breakthrough CO₂ profiles measured for a mixture of CO₂ and CH₄ (15/85 molar ratio), Ni20‐UTSA‐16 exhibited 2 times the breakthrough time with 1.5 times the loading capacity at 75 Nml min^?1 feed flow rate, compared to the parent UTSA‐16. In addition, the Ni20‐UTSA‐16 bimetallic metal–organic framework exhibited lower isosteric heat of adsorption compared to UTSA‐16 (ΔH_ave = 28.54 versus 46.85 kJ mol^?1). As a result, more than 95% of its capacity was restored by applying a partial vacuum for only 1 h at room temperature without involving any other time‐ and energy‐consuming regenerative step.     

Effect of atmosphere and heating rate on mechanism of MoSi<Subscript>2</Subscript> formation during self-propagating high-temperature synthesis

To study the effect of atmospheric type and heating rate on formation mechanism of MoSi₂, the Mo + 2Si powder mixture was exposed to simultaneous thermal analysis (STA) in air atmosphere at different heating rates (10, 15, and 20 °C/min). To further study the changes, thermal analyses of molybdenum powders and consumed silicon were also performed separately. An amount of aluminum powder (5 wt.%) was also added to Mo + 2Si powder mixture and exposed to thermal analysis at different heating rates (10, 15, and 20 °C/min) to study the effect of the presence of active elements (like aluminum) on the trend of the performance of changes. To perform phase studies on the products of the thermal analysis at a later stage, each product was separately tested by an X-ray diffraction (XRD) method. Contrary to expectations, the XRD patterns showed that the trends of changes during thermal analysis were not in the direction of MoSi₂, and the DTA–TG peaks obtained from these analyses were in fact related to other changes. Ultimately, the results showed that the peaks on the DTA curves resulted from the oxidation of molybdenum particles; and the (MoO₃) melt of the product, and in continuation of the reduction of a part of this oxide, it resulted during the silicothermic and aluminothermy reactions. The results of this research also showed that with regard to the presence of intensive oxidation tendency of molybdenum particles, there is no chance for the formation of MoSi₂ by heating the powder mixture of Mo + 2Si in air atmosphere and at low heating rates.     

Chemical synthesis of tungsten-copper nanocomposite powder

In this study homogeneous powders of CuWO₄ and WO₃ was produced from ammonium para-tungstate (APT) and copper nitrate. Then, the product was used to prepare nano-sized W-Cu powder. Hence, a mixture of ammonium paratungstate and copper nitrate with predetermined weight proportion was made in distilled water, while the content of the beaker was being stirred at a certain speed to reach the desired composition of W-20 wt % Cu. Mixture was heated to 80–100°C for 6 h. Also, pH range was adjusted at about 3–4. The mixture was then evaporated and dried in the air. To reach W-Cu composite powder, the precursor powders burned out at 520°C for 2 h in the air to form W-Cu oxide powder and then were ball milled and reduced in H₂ atmosphere to convert it into W-Cu composite powder. The resulting powders were evaluated using scanning electron microscopy, X-ray diffraction, thermogravimetric analysis and differential thermal analysis techniques. The results showed that homogeneous powders of W-Cu with particle size of around 100 nm and a nearly spherical shape could be obtained by this process. Each particle include smaller parts with size of around 20–30 nm.     

Development of <Superscript>177</Superscript>Lu-DOTA-anti-CD20 for radioimmunotherapy

Rituximab was successively labeled with ¹⁷⁷Lu-lutetium chloride. ¹⁷⁷Lu chloride was obtained by thermal neutron flux (4 × 10¹³ n cm⁻² s⁻¹) of natural Lu₂O₃ sample with a specific activity of 2.6–3 GBq/mg. The macrocyclic bifunctional chelating agent, N-succinimidyl-1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid (DOTA-NHS) was prepared at 25 °C using DOTA, N-hydroxy succinimide (NHS) in CH₂Cl₂. DOTA-rituximab was obtained by the addition of 1 mL of a rituximab pharmaceutical solution (5 mg/mL, in phosphate buffer, pH 7.8) to a glass tube pre-coated with DOTA-NHS (0.01–0.1 mg) at 25 °C with continuous mild stirring for 15 h. Radiolabeling was performed at 37 °C in 24 h. Radio-thin layer chromatography showed an overall radiochemical purity of >98% at optimized conditions (specific activity = 444 MBq/mg, labeling efficacy; 82%). The final isotonic ¹⁷⁷Lu-DOTA-rituximab complex was checked by gel electrophoresis for structure integrity control. Radio-TLC was performed to ensure that only one species was present after filtration through a 0.22 μm filter. Preliminary biodistribution studies in normal rats were carried out to determine complex distribution of the radioimmunoconjugate up to 168 h. The biodistribution data were in accordance with other antiCD20 radioimmunoconjugates already reported.     

Microwave assisted low temperature synthesis of sodium zirconium phosphate (NaZr<Subscript>2</Subscript>P<Subscript>3</Subscript>O<Subscript>12</Subscript>)

Sodium zirconium phosphate [NaZr₂P₃O₁₂], a potential ceramic matrix for fixation of high level nuclear waste, was synthesized by heating the mixture of sodium carbonate [Na₂CO₃], zirconyl nitrate hydrate [ZrO(NO₃)₂·5H₂O] and ammonium dihydrogen phosphate [NH₄H₂PO₄] in air, in a resistance heated furnace and a microwave heating system respectively in the temperature range 450 to 650°C. The mixture heated for 1 h in a resistance furnace at 450°C yielded a poorly crystalline NaZr₂P₃O₁₂ [NZP]. Increasing the temperature to 650°C produced a highly crystalline product. The same mixture heated in a microwave oven at 450°C for 1 h however, yielded the most crystalline NZP.In an alternate method, the mixture of sodium dihydrogen phosphate (NaH₂PO₄), zirconium dioxide (ZrO₂) and diammonium hydrogen phosphate [(NH₄)₂HPO₄] heated in resistance furnace at 650°C for the same period did not react in air. It also did not yield the pure product at 450°C when heated in microwave assembly for 1 h.The authors thank the Board of Research in Nuclear Sciences (BRNS) of the Department of Atomic Energy (DAE) for the financial support for this work under the project No. 2000/37/19/BRNS/1959 dtd09-02-02.     

Synthesis and colour properties of pigments based on terbium-dopped Mg<Subscript>2</Subscript>SnO<Subscript>4</Subscript>

The main aim of this work was to synthesize the magnesium orthostannate doped by terbium cations and tested whether these materials can be used for colouring of the different materials, e.g. organic binder and ceramic glazes. Initial composition of pigments was counted according the general formula 2MgO(1 − x)SnO₂–xTbO₂, where values of x varied from 0.1 to 0.5 in 0.1 steps. The simultaneous TG/DTA measurements of mixture containing tin oxide, magnesium carbonate hydroxide and terbium oxide showed that the formation of a new compound started at temperature 1,029 °C, but single-phase system was not prepared. Granulometric compositions of samples that were prepared by calcining at temperatures 1,300–1,400 °C are characterized by values of median (d ₅₀) in range 4–8 μm. The calcining temperature 1,500 °C caused the increase of the particle sizes at around 12 μm. The composition of sample 2MgO–1.5SnO₂–0.5TbO₂ and heating temperature 1,500 °C are the most suitable conditions for preparation of colourfully interesting pigment that can be recommended also for colouring of ceramic glazes. Especially, for colouring of decorative lead containing glaze G 07091 containing 5 wt% of PbO and 8 wt% of Al₂O₃.     

Conformational properties of <Emphasis Type="Italic">ortho</Emphasis>-nitrobenzenesulfonamide in gas and crystalline phases. Intra- and intermolecular hydrogen bond

A combined gas-phase electron diffraction and quantum chemical (B3LYP/6-311+G**, B3LYP/cc-pvtz, MP2/cc-pvtz) study of molecular structure of 2-nitrobenzenesulfonamide (2-NBSA) was carried out. Quantum chemical calculations showed that 2-NBSA has four conformers, two of which are stabilized by intramolecular hydrogen bond. The latter (with the S–N bond in a close to orthogonal position around the phenyl ring and differing from each other by staggered or eclipsed positions of the N–H and S=O bonds in the SO₂NH₂ group) presented in a saturated vapor over 2-NBSA at T = 433 (3) K in commensurable amounts. Experimental internuclear distances (Ǻ) for the staggered conformer are (?): r _h1(C–H)_av. = 1.071(9), r _h1(C–C)_av. = 1.390(4), r _h1(C–S) = 1.789(8), r _h1(S=O)_av. = 1.427(6), r _h1(S–N) = 1.644(6), r _h1(N–O)_av. = 1.221(4), r _h1(C′–N) = 1.487(8), r _h1(N–H)_av. = 1.014. Calculations at B3LYP/cc-pvtz level were performed to determine the structure and the energies of the transition states between conformers. It was shown that the conformer structures of free molecule differ from those of a molecule stabilized by intermolecular hydrogen bonds in a crystal. Influence of a substituent X (X = –CH₃, –NO₂) on conformational features of the ortho-substituted benzenesulfonamide was established.     

氢氧化铯促进下硒、端炔及二芳基碘盐反应合成炔基芳基硒醚

以N,N-二甲基甲酰胺(DMF)作溶剂, 在4 Å分子筛存在及氮气保护下, 将端炔、CsOH、硒粉在室温搅拌2 h, 然后加入二芳基碘盐, 在0 ℃搅拌30 h, 得炔硒醚, 收率约60%.     

Synthesis of carrageenan coated silver nanoparticles by an easy green method and their characterization and antimicrobial activities

The aim of the present work was to synthesize carrageenan coated silver nanoparticles (CA–AgNPs) using carrageenan as reducing and stabilizing agent. For this purpose, 10 mL of 0.35% (w/v) carrageenan solution was mixed with 10 mL AgNO₃ solution at different concentrations (1, 5 and 10 mM), and the resulting mixture was stirred at 100 °C at high speed for 2 h. The formation of CA–AgNPs was proven with the surface plasmon peaks observed at approximately 420 nm. The sizes and zeta potentials of CA–AgNPs were determined by Zeta-Sizer. Negative zeta potentials of CA–AgNPs indicated that the obtained AgNPs were stable. With scanning electron microscope (SEM) and transmission electron microscope analysis, it was seen that CA–AgNPs have spherical structure. According to the energy dispersion spectrometer analysis based on SEM images, it was observed that the samples were elementally composed of carbon, oxygen, sulfur, potassium and silver. The chemical structures of CA–AgNPs were determined by Fourier transform infrared spectroscopy, and it was proved that the carbonyl and OH groups of carrageenan were involved in formation and stabilizing of AgNPs, respectively. According to thermal gravimetric analysis, it has been observed that CA–AgNPs were thermally more stable than pure carrageenan. Antibacterial activity of CA–AgNPs against gram-positive and gram-negative bacteria was investigated with agar well diffusion and liquid test. It has been observed that CA–AgNPs synthesized with 1 mM AgNO₃ did not have an antibacterial activity on Escherichia coli and Staphylococcus aureus. Inhibition zones of varying diameters were observed in the 5 mM and 10 mM S-AgNPs groups. The synthesized CA–AgNPs (5 and 10 mM) have the capacity to be used in wound dressing materials or topical agents applied to burns and wounds due to their antibacterial effects and stability.

     

Metal nitrate/fuel mixture reactivity and its influence on the solution combustion synthesis of γ-LiAlO<Subscript>2</Subscript>

The reactivity of LiNO₃ and Al(NO₃)₃ with respect to urea and β-alanine was investigated. Experimental results proved that β-alanine is a more suitable fuel for LiNO₃, whereas urea seems to be more adequate for Al(NO₃)₃. Based on the different metal nitrate/fuel mixture reactivity, nanocrystalline γ-LiAlO₂ powders were prepared by solution combustion synthesis using a fuel mixture of urea and β-alanine. This fuel mixture yielded single-phase nanocrystalline γ-LiAlO₂ (32.6 nm) directly from the combustion reaction. The resulted powder had a specific surface area of 3.2 m²/g and no supplementary annealing was required. On the other hand, pure γ-LiAlO₂ could not be obtained by using a single fuel (urea, β-alanine) unless annealing at 900 °C for 1 h was performed.     

Nanosized rare-earth hexaborides: Low-temperature preparation and microstructural analysis

A versatile, rapid and easy synthesis of pure rare-earth-(RE) hexaboride powders was developed, without resorting to hazardous precursors or generating undesired, ineliminable, side products. To this purpose, we employed a metathesis reaction, typically starting from a mixture of a hydrated rare earth trichloride and MgB₂, kept at 650 °C for 1 h under vacuum. This methodology affords nanosized RE hexaborides, with average crystallite (domain) sizes down to a few nanometers, useful for tailoring the functional performances of the MgB₂ superconducting phase produced by the reactive liquid infiltration method. For the powders showing the lowest average domain sizes (YbB₆ and EuB₆), an unconventional microstructural analysis, based on Total Scattering methods and on the Debye Function Approach, was also performed, which provided the complete nanocrystal size distributions.     

Biosurfactant Production by <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> Grown in Residual Soybean Oil

Pseudomonas aeruginosa PACL strain, isolated from oil-contaminated soil taken from a lagoon, was used to investigate the efficiency and magnitude of biosurfactant production, using different waste frying soybean oils, by submerged fermentation in stirred tank reactors of 6 and 10 l capacities. A complete factorial experimental design was used, with the goal of optimizing the aeration rate (0.5, 1.0, and 1.5 vvm) and agitation speed (300, 550, and 800 rpm). Aeration was identified as the primary variable affecting the process, with a maximum rhamnose concentration occurring at an aeration rate of 0.5 vvm. At optimum levels, a maximum rhamnose concentration of 3.3 g/l, an emulsification index of 100%, and a minimum surface tension of 26.0 dynes/cm were achieved. Under these conditions, the biosurfactant production derived from using a mixture of waste frying soybean oil (WFSO) as a carbon source was compared to production when non-used soybean oil (NUSO), or waste soybean oils used to fry specific foods, were used. NUSO produced the highest level of rhamnolipids, although the waste soybean oils also resulted in biosurfactant production of 75–90% of the maximum value. Under ideal conditions, the kinetic behavior and the modeling of the rhamnose production, nutrient consumption, and cellular growth were established. The resulting model predicted data points that corresponded well to the empirical information.     

The pH Shift and Precursor Feeding Strategy in a Low-Toxicity FR-008/Candicidin Derivative CS103 Fermentation Bioprocess by a Mutant of <Emphasis Type="Italic">Streptomyces</Emphasis> sp. FR-008

CS103, the novel derivative of polyene macrolides antibiotic FR-008/candicidin with lower toxicity has been isolated from the culture mycelia of the mutant of Streptomyces sp. FR-008, with targeted deletions of the fscP cytochrome P450 gene from its chromosome. To enhance biosynthesis of CS103, pH shift and precursor feeding strategy for fermentation process by the mutant of Streptomyces sp. FR-008 in a stirred tank bioreactor was developed. According to the process parameters analysis, the effectiveness of the strategy was examined and confirmed by experiments. A maximal CS103 concentration of 139.98 μg/mL was obtained, 2.05-fold higher than that in the pH-uncontrolled fermentation. Compared to other three cases as pH-uncontrolled, pH-controlled, and two-stage pH-controlled batch cultures, the proposed “pH shift and precursor feeding strategy” effectively avoided the scarcity of the antibiotic precursor, increased the CS103 yield from biomass (Y _P/X) and substrate (Y _P/S) by 110.61% and 48.52%, respectively, and at the time the fermentation time was shortened from 120 to 96 h. The highest CS103 production rate (1.46 μg mL⁻¹ h⁻¹) of the pH shift and precursor feeding strategy was 284.21%, 97.30%, and 58.70% higher than that of pH-uncontrolled, pH-controlled, and two-stage pH-controlled batch culture cases, respectively.