The Cubic-Two-State Equation of State: Cross-associating mixtures and Monte Carlo study of self-associating prototypes

A new equation of state for associating fluids has recently been presented by Medeiros and Tellez-Arredondo, the Cubic-Two-State Equation of State (CTS EoS) [Ind. Eng. Chem. Res. 47 (2008) 5723]. This equation arises from the coupling of the Soave–Redlich–Kwong EoS (SRK) with an association term from a two-state association model. The CTS EoS is polynomial in volume and it is able to describe vapor pressures and molar volume of associating fluids such as water, alcohol and phenol, among others. The equation is also able to describe the liquid–vapor equilibria of their mixtures with alkanes. In this paper, the physical and thermodynamic foundations of the CTS EoS are further investigated. In order to verify its applicability for cross-associating systems, the equation was employed in the prediction of phase equilibria behavior of binary alcohol–alcohol and water–alcohol mixtures. Very good agreement between predictions and experimental phase equilibria data was obtained with very simple combining rules and only one adjustable binary parameter. No additional parameters were necessary to describe ternary systems. With the purpose of checking the model's hypothesis and limitations, the two-state association term was coupled with the hard sphere Carnahan–Starling EoS, forming the CS-TS equation and the association characteristic parameters were determined theoretically for prototype association fluids. Monte Carlo NPT simulations of such fluids were performed and the results were compared with the equation's predictions. The CS-TS was able to describe qualitatively the pvT$pvT$ behavior of the prototype; nevertheless, it is not as accurate as those predictions obtained from the combination CS with Wertheim's association term. It seems that, when adjusting parameters of the CTS EoS to real substances, the discrepancies between the predicted and the real association contribution are dissipated among other adjustable parameters, specially on the dispersive term of the SRK equation. Finally, it is shown that CTS EoS isotherms can only have one or three real bigger roots than the co-volume for positive pressures, similar to cubic equations of state, and then it has the desirable form to describe vapor–liquid phase equilibria of associating compounds mixtures.     

Modeling phase equilibria of alkanols with the simplified PC-SAFT equation of state and generalized pure compound parameters

The simplified PC-SAFT equation of state has been applied to liquid–liquid, vapor–liquid and solid–liquid equilibria for mixtures containing 1- or 2-alkanols with alkanes, aromatic hydrocarbons, CO₂ and water. For the alkanols we use generalized pure compound parameters. This means that two of the physical pure compound parameters, m (segment number) and σ (segment diameter), are obtained from linear extrapolations, since m and mσ³, increase linearly with respect to the molar mass, and moreover, the two association parameters (association energy and association volume) were assumed to be constant for all alkanols. Only the dispersion energy is fitted to experimental data. Thus it is possible to estimate parameters for several 1- and 2-alkanols. The final aim is to develop a group contribution approach for PC-SAFT which is suitable for complex compounds, considering that the motivation of this project is to obtain a thermodynamic model which can be used in the development of sophisticated products such as pharmaceuticals, polymers, detergents or food ingredients. One of the severe limitations in applying SAFT-type equations of state to these compounds is that the procedure for obtaining the pure compound parameters is usually based on fitting to saturated vapor pressure and liquid density data over an extended temperature range. However, such data are rarely available for complex compounds. To verify the new pure compound parameters, comparisons to ordinary optimized alkanol parameters, where all five pure compound parameters were fitted to experimental liquid density and vapor pressure data, were made. The results show that the new generalized alkanol parameters from this work perform at least as well as other alkanol parameter sets.     

Thiourea linked peracetylated glucopyranosyl–anthraquinone conjugate as reversible ON–OFF receptor for fluoride in acetonitrile

A new thiourea linked peracetylated glucopyranosyl–anthraquinone conjugate (L) has been synthesized and characterized. The binding properties of L have been studied with nineteen different anions. The L exhibited selective chromogenic as well as fluorescent chemosensor property toward F⁻ by a ∼13-fold increase in the emission intensity upon binding with F⁻. The minimal detection limit for F⁻ is 185 ± 5 ppb in acetonitrile. Interaction of F⁻ led to a bathochromic shift of 80 nm in the absorption band. An INHIBIT logic gate has been proposed using the output obtained from the fluorescence studies. The structure of the species formed upon the interaction of F⁻ with L has been established by DFT computations.     

A short, simple and general approach for the synthesis of (3S,4S)-3-methoxy-4-methylamino pyrrolidine and (3S,4R)-3-methoxy-4-methylamino pyrrolidine

A general and efficient stereoselective approach for the synthesis of (3S,4S) and (3S,4R)-3-methoxy-4-methylamino pyrrolidines, a part of the structure of AG-7352, a naphthyridine antitumor agent and quinoline antibacterial compounds has been described.     

Phase equilibria modeling of biodiesel related mixtures using the GCA-EoS model

In this work, a group-contribution equation of state that takes into account association effects (GCA-EoS) is extended to model the phase behavior of fatty esters (biodiesel) in binary mixtures with glycerol, alcohols and water and ternary mixtures with glycerol and methanol. A new associating group (glycerol hydroxyl group: OH^Gly) was defined to take into consideration the association effects in the glycerol molecule. Self-association of methanol, water and glycerol and cross-association between methanol–glycerol, alcohol–ester, water–ester and glycerol–ester groups were considered. New pure-group, binary interaction and association parameters have been determined. The correlations and predictions of the model are found in acceptable agreement with selected experimental data reported in the literature.     

The regioselectivity of the formation of 2-pyrazolylthiazoles and their precursors from the reaction of 2-hydrazinothiazoles with 4,4,4-trifluoro-1-hetaryl-1,3-butanediones

Reaction of 2-hydrazinothiazoles 1 with 1-thienyl- and 1-furyl-1,3-butanediones 2a,b in methanol in the presence of hydrochloric acid mainly leads to a mixture of pyrazoles 3 and pyrazolines 4 or pyrazoles 3 and 5 in strong acidic conditions. Isomeric hydrazones 6 and pyrazolines 4 were formed and isolated in these reactions in the absence of hydrochloric acid. It has been shown that the regioselectivity in the reaction of diketones 2 with hydrazine 1 is governed by both the concentration of acid and the nature of substituents in the 1,3-diketones 2. Cyclization of hydrazones 6 is shown to occur under milder conditions than dehydration for pyrazolines 4. The new heterocyclic compounds were prepared and fully characterized by NMR spectra and by X-ray analysis for 3c.     

First separation and characterization of cis and trans 1,2-bisaryloxy perfluorocyclobutanes

4-Bromotrifluorovinyloxybenzene (4-Br-TFVE) undergoes cyclodimerization upon heating at 150 °C affording cis and trans isomers of 1,2-bis(4-bromophenoxy)hexafluorocylcobutane. Stereoisomers were separated by selective crystallization, confirmed by single crystal X-ray, and further characterized by NMR. Remarkable difference in the solid state structures include aryl to aryl dihedral angles of 12° for the trans isomer and 88° for the cis isomer. Polymers containing roughly equal amounts of cis and trans fused perfluorocyclobutyl (PFCB) rings should be expected to have low crystallinity due to the marked difference in the two unit cells as is observed.     

Molecular structure and spectral properties of thionaphthalimides

The molecular structure and absorption spectra of monothio- and dithio-naphthalimides were compared to their naphthalimide analogues using AM1, PM3 and ZINDO/S semiempirical quantum chemical methods. The substitution of the 4R-naphthalimide oxygen atoms by sulphur atoms resulted in a red-shift of the absorption spectra by Δλ_max60-65 and 100-140 nm, respectively. The thionated naphthalimide derivatives do not show observable fluorescence due to intersystem crossing to the triplet -states localised at the CS groups. The -absorption bands of monothioimides are located at 525-580 nm (ε=60-80) and those for dithioimides at 535-560 nm (ε=140-390) and 628-686 nm (ε=34-68). None of these transitions are solvent sensitive. The -transitions of N-phenylthioimides have also a small contribution from -states due to a partial conjugation between CS group and π-electronic system of the N-phenyl ring. As a result, the bands of aromatic substituted N-phenylthioimides are red-shifted as compared to those of the aliphatic N-methyl-thioimides.     

Action des hydrazines fluoroalkylées sur les phosphoallènes: synthèse d’hydrazones N-fluoroalkylées β-phosphonatées

Ten phosphorylated β-hydrazones of structure R₂P(O)C(NNHR_F)CHR₂′ were prepared in 54-91% yield by heating the allenes R₂P(O)CHCCR₂′ with fluorinated hydrazines H₂NNHR_F in chloroform or methanol [R=Ph, OCH₂C(Me)₂CH₂O or OCH₂C(Me)(Pr)CH₂O, R′=H or Me and R_F=CH₂CF₃ or C₆F₅]. Two cyclohexyl derivatives were prepared similarly from R₂P(O)CHCCy. The triphenyl derivatives Ph₂P(O)CH₂C(NNHCH₂CF₃)Ph and Ph₂P(O)CH₂C(NNHC₆F₅)Ph were made in 91 and 68% yield by heating the ketones Ph₂P(O)CH₂C(O)Ph with an ethanol solution of the corresponding hydrazines. The stereochemistry of the hydrazones was determined by multinuclear NMR experiments. Compounds with C(NNHR_F)Me groups exist as a mixture of Z and E isomers, with the Z form predominating (fluorinated group syn to phosphorus). Those with C(NNHR_F)CHMe₂, C(NNHR_F)Cy or C(NNHR_F)Ph groups were formed selectively, the Z isomers being the only products. The results are explained by steric hindrance, the bulkier isopropyl, cyclohexyl or phenyl group disfavouring the E configuration. , , , NMR data, coupling constants and IR data are reported.     

Solvent effects on the O NMR chemical shifts of 4-dimethylsulfoximide-1,1,1-trifluoro-3-alken-2-ones

A multi-linear-regression analysis using the Kamlet-Abbout-Taft (KAT) solvatochromic parameters in order to elucidate and quantify the solvent effects on the chemical shifts of three 4-dimethylsulfoximide-1,1,1-trifluoro-3-buten-2-ones is reported. The predominant conformational structures of compounds has been determined by energy minimization calculations using the Austin Model (AM1) semi-empirical method, which has been used to explain the NMR chemical shifts for CO and SO groups. The chemical shifts of carbonyl and sulfoximide oxygen’s of molecules showed similar dependencies (in ppm) on the solvent polarity-polarizability and the solvent hydrogen-bond-donor (HBD) acidities. The influence of solvent hydrogen-bond-acceptor (HBA) basicities was little significant.     

Effect of doping and temperature on the crystal structure of (V1−xMox)2O3 above and below the metal/insulator transition

The crystal structure of new molybdenum-doped vanadium sesquioxides (V_1−xMo_x)₂O₃ (0?x?0.20) has been studied at low temperature (10 K) and up to room temperature, through neutron and X-ray powder diffraction. The transition from insulating I- to metallic M-type phases, either by doping or thermally driven, is accompanied by an abrupt decrease of all interatomic distances. Within each structural type however, at 10 K, the effect of doping is essentially the same as at room temperature: it increases cation-oxygen distances, and decreases cation-cation distances, making the cationic coordination octahedra more regular. Thermal effects differ for each phase type: all interatomic distances normally increase in the M-type phase (but with different octahedral modifications depending on doping), but they decrease or remain constant in the I-type phase. This produces an unusual negative thermal expansion coefficient up to 5% at low temperature for the doped compounds.     

Equation of state for aqueous electrolyte systems based on the semirestricted non-primitive mean spherical approximation

The semirestricted non-primitive mean spherical approximation (npmsa) is used in combination with the PC-SAFT equation of state to model completely dissociating aqueous alkali halide systems. The salts are described using ion-specific parameters from tables and correlations. Upon analyzing aqueous electrolyte systems at infinite dilution of the salt it was concluded that for the arithmetic mean ion diameter of anion and cation, the semirestricted npmsa contribution gives no reliable results. Therefore, this parameter is adjusted in this work. The model was applied to aqueous alkali halide systems up to the solubility limit at T = 298.15 K. Mean ionic activity coefficients and osmotic coefficients were correlated with good results. The model was subsequently applied to temperatures up to T = 373.15 K and compared to liquid densities and to system pressures up to the solubility limit of the salts in water. The agreement between experimental data and the proposed equation of state is satisfactory for the liquid densities and excellent in case of the system pressures.     

Organoaluminum fluorides

In this review we introduce a survey of organoaluminum fluorides with some examples of other related aluminum-fluorine compounds. A systematic overview of currently available synthetic methods for the preparation of organoaluminum fluorides is presented first. Then major examples of molecular structures of different classes of compounds are discussed in connection with their structural parameters and and NMR spectroscopic characteristics.     

{[K.18-Crown-6]Br3}n: a unique tribromide-type and columnar nanotube-like structure for the oxidative coupling of thiols and bromination of some aromatic compounds

Reaction of 18-crown-6 with KBr and then with bromine (Br₂) afforded a unique tribromide salt with a nanotube-like structure ({[K.18-crown-6]Br₃}_n). Oxidative coupling of thiols and bromination of some aromatic compounds is the first report on the chemistry of this reagent.     

Synthesis and characterisation of bis(pentafluorophenyl)antimony(V) cations, [(C6F5)2SbL3]

Pentacoordinate complex cations of the general formula [(C₆F₅)₂SbL₃]³⁺ stabilized as solid salts in combination with tetraphenylborate (BPh₄), tetrafluorobroate (BF₄) anions, where L=DMSO, Ph₃AsO, PyO, DMF, α-, β- and γ-picoline have been isolated. The newly formed complexes were characterized by elemental analysis, molar conductance measurements, solid-state IR and and NMR. From these results, a five-fold coordination around antimony was required.