Zirconium complexes with versatile β-diketiminate ligands: Synthesis, structure, and ethylene polymerization

A series of zirconium complexes (2c, 2d, 2f, 2g, 2h, 2i) containing symmetrical or unsymmetrical β-diketiminate ligands were synthesized by the reaction of ZrCl₄ · 2THF with lithium salt of the corresponding ligand in 1:2 molar ratio. X-ray crystal structures reveal that complexes 2d and 2g adopt distorted octahedral geometry around the zirconium center. These complexes showed moderate activities for ethylene polymerization, when methylaluminoxane (MAO) was used as cocatalyst. The steric and electronic effects of the substituents at the phenyl rings had considerable influence on the catalytic activities of the metal complex, as well as the molecular weights and molecular weight distributions (MWD) of produced polymers. Introduction of electron-withdrawing CF₃ group to phenyls in the ligand led to a significant increase of catalytic activities, and complex 2f (p-CF₃) exhibited the highest catalytic activity of 7.45 × 10⁵ g PE/mol-Zr · h among the investigated complexes. Complexes 2a-d could produce ultra-high molecular weight polyethylenes (UHMWPE) that were hardly dissolvable in decahydronaphthalene or 1,2-dichlorobenzene under the molecular weight measurement conditions. Nevertheless, polyethylenes with broad MWD could be afforded by complexes 2g-i, which was probably due to the introduction of bulky unsymmetrical ligands leading to the formation of multi active species under polymerization conditions. High-temperature ¹³C NMR data indicate the linear structure of obtained polyethylenes.     

Synthesis of bimodal molecular weight distribution polyethylene with α-diimine nickel(II) complexes containing unsym-substituted aryl groups in the presence of methylaluminoxane

A series of unsymmetrical complexes of 2,3-bis(2-phenylphenyl)-butanediimine nickel(II) dibromide (complex 1), 1,4-bis(2-isopropyl-6-methylphenyl)-acenaphthenediimine nickel(II) dibromide (complex 2) and meso- and rac-1,4-bis (2,4-di-tert-butyl-6-methylphenyl)-acenaphthenediimine nickel(II) dibromide (meso-3 and rac-3) were synthesized and activated by methylaluminoxane (MAO) for ethylene polymerization. By ¹³C NMR characterization, meso- and rac-stereo-isomers were detected in the condensation products resulting from the reaction of unsym-substituted anilines with diketones. It was notable that meso- and rac-isomers in ligand 1 or ligand 2 could not be separated owing to their interconversion, however, meso- and rac-isomers in ligand 3 could be isolated and identified by X-ray diffraction and NMR analysis. At low polymerization temperatures, complex 1/MAO afforded polyethylene with bimodal molecular weight distribution, while complex 2/MAO prepared polyethylene with single-modal distribution. Moreover, by raising polymerization temperature or extending time of catalyst aging, bimodal molecular weight distribution polyethylene was also produced by complex 2/MAO. The hypothesis of bimodal molecular weight distribution polyethylene synthesized by unsymmetrical α-diimine nickel(II) complexes was supported that the molecular weight of polyethylene produced by rac-3/MAO was significantly higher than that produced by meso-3/MAO under identical polymerization conditions. A unique methodology to prepare polyethylene with bimodal molecular weight distribution was demonstrated.     

Simple preparation of 7-alkylamino-2-methylquinoline-5,8-diones: regiochemistry in nucleophilic substitution reactions of the 6- or 7-bromo-2-methylquinoline-5,8-dione with amines

7-Alkylamino-2-methylquinoline-5,8-diones (7) were prepared from 6-bromo-2-methylquinoline-5,8-dione (2) not from 7-bromo-2-methylquinoline-5,8-dione (1). The chemistry of the transformation of 6-bromo-2-methylquinoline-5,8-dione (2) and various alkylamines, such as piperidine, 2-methylaziridine, benzylamine, n-butylamine, cyclohexylamine, t-butylamine, and ammonia, to 7-alkylamino compounds 7 as well as the transformation of 7-bromo compound 1 and the alkylamines to 6-alkylamino-2-methylquinoline-5,8-diones 11 was studied. The efficient and simple synthetic routes of the key intermediates, 6- and 7-bromo-2-methylquinoline-5,8-diones (2 and 1), from 5,8-dihydroxy-2-methylquinoline (15) and 5,7-dibromo-8-hydroxy-2-methylquinoline (9), respectively, were developed. We also proposed the mechanism for the unusual regioselectivity on the nucleophilic amination of 6- and 7-bromo-2-methylquinoline-5,8-diones (2 and 1).     

Synthesis and reactions of 2-hydroxy-4-oxo-4-(2,3,5,6-tetrafluoro-4-methoxyphenyl)-but-2-enoic acid methyl ester

2-Hydroxy-4-oxo-4-(2,3,5,6-tetrafluoro-4-methoxyphenyl)-but-2-enoic acid methyl ester (1) was synthesized by the reaction of pentafluoroacetophenone with dimethyl oxalate in the presence of sodium methylate. Subsequently, reactions of compound 1 with aniline, o-phenylenediamine, and o-aminophenol were investigated. In addition, the thermal cyclization of ester 1 was studied and led to the formation of 5,6,8-trifluoro-7-methoxy-4-oxo-4H-chromene-2-carboxylic acid methyl ester (6) due to nucleophilic substitution of the 3-fluoro group. Hydrolysis of compound 1 and subsequent cyclization by treatment with SOCl₂ gave 5-(2,3,5,6-tetrafluoro-4-methoxyphenyl)-furan-2,3-dione (3). Thermal decarbonylation of compound 3 under mild conditions resulted in the formation of 3-(2,3,5,6-tetrafluoro-4-methoxyphenyl)-propene-1,3-dione (4) which dimerized to pyranone 5.     

Novel tricarbonyl rhenium complexes of 5,8-quinolinedione derivatives - Synthesis, spectroscopic characterisation, X-ray structure and DFT calculations

The molecular structure of 7-acetamido-2-methyl-quinoline-5,8-dione has been determined and the reactivity of 7-acetamido-2-methyl-quinoline-5,8-dione (1) and 6-acetamido-2-methyl-quinoline-5,8-dione (2) towards Re(CO)₅Cl has been examined. Two novel tricarbonyl rhenium complexes, fac-[Re(CO)₃(7-acetamido-2-methyl-quinoline-5,8-dione)Cl]·CHCl₃ (3·CHCl₃) and fac-[Re(CO)₃(6-acetamido-2-methyl-quinoline-5,8-dione)Cl]₂·CHCl₃ (4·CHCl₃), have been synthesized and characterized spectroscopically and structurally. The electronic spectrum of 3 was investigated at the TDDFT level employing B3LYP functional in combination with LANL2DZ.     

Solid-state tubular assemblies of thiolactones: synthesis and structural characterization

The synthesis of cyclic thiolactones, 2,5,8-trithiacyclododecane-1,9-dione (4), 2,5,8,14,17,20-hexathiacyclotetracosane-1,9,13,21-tetraone (5), 2,5,8-trithiacyclotetradecane-1,9-dione (6) and 2,5,8,16,19,22-hexathiacyclooctacosane-1,9,15,23-tetraone (7) was achieved by tin-template reaction of 2,2-dibutyl-2-stanna-1,3,6-trithiacyclooctane (1) with corresponding diacyl chlorides. The structures of 12-, 14-, 24- and 28-membered ring systems of 4, 6, 5, and 7, respectively, were investigated by X-ray structure analysis. These investigations revealed that, in the solid-state, thiolactones 4 and 7 form tubular assemblies. However, the crystal structure of 5 forms layered packing dominated by CH?O hydrogen bonds whereas 6 forms three-dimensional network via CH?O hydrogen bonds and van der Waals interactions.     

Ring transformation of chromone-3-carboxamide

4-Hydroxycoumarin-3-carboxaldehyde (5) was obtained from chromone-3-carboxaldehyde (1) via chromone-3-carboxamide (2) and 3-aminomethylene-2H-chroman-2,4-dione (3). 3-Alkylaminomethylenechroman-2,4-diones (7,8) were obtained from the reaction of primary aliphatic amines with chromone-3-carboxamide (2). Treatment of chromone-3-carboxamide with sodium methoxide gives 3-(2-hydroxybenzoyl)-2H-chromeno[2,3-b]pyridine-2,5(1H)-dione (9).     

Efficient synthesis of N-benzyl-3-aminopyrrolidine-2,5-dione and N-benzyl-3-aminopyrrolidin-2-one

Reaction of N-tert-butyloxycarbonylasparagine (Boc-Asn) with 2 equiv of benzyl bromide in presence of cesium carbonate led to N-benzyl-3-Boc-amino-pyrrolidin-2,5-dione 1a (N-benzyl-3-Boc-aminosuccinimide). Borane dimethylsulfide reduced 3-Boc-aminopyrrolidine-2,5-dione 1a into 3-Boc-aminopyrrolidin-2-one 2a. The same procedure could also be used to prepare derivatives 1 and 2 substituted on the aromatic ring.     

Reactions of guaiazulene with methyl terephthalaldehydate and 2-hydroxy- and 4-hydroxybenzaldehydes in methanol in the presence of hexafluorophosphoric acid: comparative studies on molecular structures and spectroscopic, chemical and electrochemical properties of monocarbocations stabilized by 3-guaiazulenyl and phenyl groups

Reaction of guaiazulene (1) with methyl terephthalaldehydate (2) in methanol in the presence of hexafluorophosphoric acid at 25 °C for 2 h under aerobic conditions gives (3-guaiazulenyl)[4-(methoxycarbonyl)phenyl]methylium hexafluorophosphate (5) in 94% yield. Similarly, reactions of 1 with 2-hydroxybenzaldehyde (3) and 4-hydroxybenzaldehyde (4) under the same reaction conditions as 2 give (3-guaiazulenyl)(2-hydroxyphenyl)methylium hexafluorophosphate (6) and (3-guaiazulenyl)(4-hydroxyphenyl)methylium hexafluorophosphate (7) in 89 and 97% yields, respectively. Comparative studies on the molecular structures as well as the spectroscopic, chemical and electrochemical properties of the monocarbocation compounds 5-7 stabilized by 3-guaiazulenyl and 4-(methoxycarbonyl)phenyl (or 2-hydroxy- or 4-hydroxyphenyl) groups are reported.     

Oxygen replacement by fluorine in carbonyl derivatives of perfluoroaromatic compounds and isomerization of perfluoroindan-1,3-dione to perfluoro-3-methylenephthalide under the action of HF/SbF5

When acted upon by HF/SbF₅ at 95 °C, carbonyl groups of perfluorinated acetophenone (10), 3,4-dihydronaphthalen-1(2H)-one (8), 2,3-dihydronaphthalene-1,4-dione (9), benzocyclobutenone (6), benzocyclobutenedione (7) and indan-1-one (1) are converted into difluoromethylene groups to give the corresponding perfluoroaromatic products. Perfluoroindan-2-one (5), under the same conditions, is transformed to bis(perfluoroindan-2-yl) ether (21). On heating with HF/SbF₅, perfluoroindan-1,3-dione (2) isomerizes into perfluoro-3-methylenephthalide (4) at 95 °C, and gives 4,5,6,7-tetrafluoro-3-trifluoromethyl-phthalide (14) at 130 °C. Compound 4 in the absence of a solvent dimerizes giving perfluorodispiro[phthalide-3,1′-cyclobutane-2′,3″-phthalide] (18), and when heated with SbF₅ at 130 °C, it is converted into perfluoro-3-methylphthalide (3). When acted upon by HF/SbF₅ at 95 °C, perfluorinated benzoic acid (12) and phthalic anhydride (13) give the corresponding products with trifluoromethyl groups.     

Zirconocene complexes with a biphenyl substituted cyclopentadienyl ligand: synthesis, characterization, and olefin polymerization behavior

Novel zirconocene complexes (1-Biph-3,4-Me₂Cp)₂ZrCl₂ (3), (C₅Me₅)(1-Biph-3,4-Me₂Cp)ZrCl₂ (4), and (C₅H₅)(1-Biph-3,4-Me₂Cp)ZrCl₂ (5) containing a 1-biphenyl-3,4-dimethylcyclopentadienyl ligand (2) have been prepared and their solid state structures were characterized by X-ray diffraction method. The crystal structure of 3 revealed a racemic, C₂-symmetric nature in the solid state. In ethylene polymerization, they all afforded high-density polyethylene with very high activity. Especially, the catalytic properties of 3 were most marked in terms of both polymerization activity and molecular weight of polyethylene among them. They also showed good activity on the polymerization of propylene, but afforded nearly atactic, amorphous polypropylenes with a little higher [mmmm] methyl pentad values by 3 and 4 than that by the most active 5 under the given reaction conditions.     

1,1,3,3,3-Pentafluoro-2-pentafluorophenyl-1,2-epoxypropane and trimethylphosphite: unusual 1,4-dioxan-2,5-dione ring formation

1,1,3,3,3-Pentafluoro-2-pentafluorophenyl-1,2-epoxypropane 1 reacted with trimethylphosphite giving two diastereomers, (Z)- and (E)-3,6-bis(trifluoromethyl)-3,6-bis(pentafluorophenyl)-1,4-dioxan-2,5-dione 2a, b in a 1:1 ratio, cyclodimerisation product of the intermediately generated α-lactone 4. Compounds 2a, b were hydrolysed to furnish 3,3,3-trifluoro-2-hydroxy-2-(2,3,4,5,6-pentafluorophenyl)propionic acid 5.     

A new class of aromatic poly(ether-ketone benzoxazole) copolymers by nucleophilic polycondensation: Synthesis and properties

A number of difluorophenyl benzoxazole (DB) monomers and 4,4′-difluorobenzophenone (DFB) were subjected to fluoro-displacement with two different phenoxides in a polar aprotic solvent. A series of novel poly(ether-ketone benzoxazole) copolymers (PAEKBOs) were more readily prepared, in which the generation of aryl-ether linkages was the copolymer forming reaction. The effects of monomer structure and polymerization conditions on the polymerization results and polymer solubility were analyzed. Copolymers 1, 2-X, 4 and 6 were obtained with high molecular weight. Copolymers 2-X and 4 showed organic solubility, especially the copolymers 2-X could dissolve in many usual organic solvents at the solid concentration of up to 20 wt%. TGA and DSC measurements confirmed that the copolymers 2-X, 4 and 6 were thermally stable up to 500 °C, and showed single enhanced T_gs and an amorphous morphology. The copolymers behaved in many respects as engineering thermoplastics. The properties and the processability of several members of the PAEKBOs offer the prospect of being candidates to substitute poly(ether-ether-ketone) (PEEK) using in a wider usage temperature range and being high performance materials for many applications as films, coatings for optical and electronic devices and gas separation membranes.     

Synthesis of palladium complexes containing 2-methoxycarbonyl-6-iminopyridine ligand and their catalytic behaviors in reaction of ethylene and norbornene

A series of palladium complexes (C1-C7) have been prepared by the reaction of PdCl₂(CH₃CN)₂ with 2-methoxycarbonyl-6-iminopyridines, L1-L7. The 2-methoxycarbonyl-6-iminopyridines and their complexes were fully characterized by FT-IR, NMR spectra and elemental analysis. Structures of C1, C2, C4, C5 and C6, C7 were determined by X-ray crystallography, and these complexes fold slightly distorted square planar structures around palladium coordinated with two nitrogen atoms and two chlorides. These palladium complexes exhibited moderate catalytic activities for ethylene dimerization and/or polymerization in the presence of methylaluminoxane, and showed remarkable catalytic activity for norbornene polymerization. The catalytic behaviors of these complexes were highly affected by both the ligand employed and reaction conditions.     

Ni(II) and Cu(II) complexes of phenoxy-ketimine ligands: Synthesis,structures and their utility in bulk ring-opening polymerization (ROP) of l-lactide

Synthetic, structural and catalysis studies of Ni(II) and Cu(II) complexes of a series of phenoxy-ketimine ligands with controlled variations of sterics, namely 2-[1-(2,6-diethylphenylimino)ethyl]phenol (1a), 2-[1-(2,6-dimethylphenylimino)ethyl]phenol (1b) and 2-[1-(2-methylphenylimino)ethyl]phenol (1c), are reported. Specifically, the ligands 1a, 1b and 1c were synthesized by the TiCl₄ mediated condensation reactions of the respective anilines with o-hydroxyacetophenone in 21–23% yield. The nickel complexes, {2-[1-(2,6-diethylphenylimino)ethyl]phenoxy}₂Ni(II) (2a) and {2-[1-(2,6-dimethylphenylimino)ethyl]phenoxy}₂Ni(II) (2b), were synthesized by the reaction of the respective ligands 1a and 1b with Ni(OAc)₂ · 4H₂O in the presence of NEt₃ as a base in 71–75% yield. The copper complexes, {2-[1-(2,6-diethylphenylimino)ethyl]phenoxy}₂Cu(II) (3a), {2-[1-(2,6-dimethylphenylimino)ethyl]phenoxy}₂Cu(II) (3b) and {2-[1-(2-methylphenylimino)ethyl]phenoxy}₂Cu(II) (3c) were synthesized analogously by the reactions of the ligands 1a, 1b and 1c with Cu(OAc)₂ · H₂O in 70–87% yield. The molecular structures of the nickel and copper complexes 2a, 2b, 3a, 3b and 3c have been determined by X-ray diffraction studies. Structural comparisons revealed that the nickel centers in 2a and 2b are in square planar geometries while the geometry around the copper varied from being square planar in 3a and 3c to distorted square planar in 3b. The catalysis studies revealed that while the copper complexes 3a, 3b and 3c efficiently catalyze ring-opening polymerization (ROP) of l-lactide at elevated temperatures under solvent-free melt conditions, producing polylactide polymers of moderate molecular weights with narrow molecular weight distributions, the nickel counterparts 2a and 2b failed to yield the polylactide polymer.     

Formation and skeletal transformations of perfluoroindan-1-one and perfluoroindan-1,3-dione in the reaction of perfluoroindan with SiO2/SbF5

Perfluoroindan-1-one (2) is obtained in the reaction of perfluoroindan (1) with SiO₂/SbF₅ at 70 °C. Compound 1 heated with SiO₂/SbF₅ at 130 °C and then treated with water, gives 3-hydroxy-perfluoro-3-methylphthalide (4). Ketone 2 is converted, under the action of SbF₅ at 130 °C, to perfluoro-2-ethylbenzoic acid (9) and disproportionates to compound 1 and perfluoroindan-1,3-dione (3); the latter is transformed to phthalide 4 under the reaction conditions.     

New o-methoxyphenylcyclopentadienylchromium (III) complexes: Synthesis, structures and catalytic properties for ethylene polymerization

Two new ligands 1-(2-methoxyphenyl)-3,4-diphenylcyclopentadiene (1) and 1-(2-methoxyphenyl)-2,3,4,5-tetramethylcyclopentadiene (2), as well as their corresponding cyclopentadienylchromium complexes η⁵-1-(2-methoxyphenyl)-3,4-diphenylcyclopentadienyl chromium dichloride (3) and η⁵-1-(2-methoxyphenyl)-2,3,4,5-tetramethylcyclopentadienyl chromium dichloride (4) were synthesized and characterized. Molecular structures of 3 and 4 were determined by single-crystal X-ray diffraction. Complexes 3 and 4 were tested as catalyst precursors for ethylene polymerization. When activated with Al(ⁱBu)₃ and , complex 3 shows reasonable catalytic activity while 4 exhibits high catalytic activity for ethylene polymerization. The effects of temperature and Al/Cr ratio on the catalytic activity were studied. The molecular weight and melting temperature of the produced polyethylenes were determined.     

Stereoselective synthesis of tubuvaline methyl ester and tubuphenylalanine, components of tubulysins, tubulin polymerization inhibitors

Synthetic studies of two components of tubulysins, tubulin polymerization inhibitors are described. The highly stereoselective synthesis of tubuvaline methyl ester (2) was accomplished by 1,3-dipolar cycloaddition of nitrone d-6 and acrylic acid derivatives 7 as a key step. The synthesis of tubuphenylalanine (3) was conducted by an aldol reaction of a boron enolate of (S)-4-isopropyl-3-propionyl-2-oxazolidinone (13) with aldehyde 14, readily prepared from phenylalanine, followed by Barton deoxygenation under radical conditions.     

Nickel and cationic palladium complexes bearing (imino)pyridyl alcohol ligands: Synthesis, characterization and vinyl polymerization of norbornene

A series of nickel and palladium complexes bearing (imino)pyridyl alcohol tridentate [N,N,O] ligands, 2-(ArNCMe)-6-{(HO)CR₂}C₅H₃N (L1-L4), were synthesized and sufficiently characterized by elemental and spectroscopic analysis along with X-ray diffraction analysis. The X-ray diffraction demonstrated that five-coordinated nickel halide complexes (1a-4a and 1b) and six-coordinated nickel acetate complex (1c) were prepared, and cationic palladium complexes (1d and 2d) formed with the [PdCl₄]²⁻ counterion. All these complexes displayed high catalytic activities up to 1.883 × 10⁷ g(PNB) mol⁻¹(cat) h⁻¹ (2d) for the vinyl polymerization of norbornene on treatment with excess methylaluminoxane (MAO), affording the vinyl-type PNBs with high molecular weights and relatively narrow molecular weight distributions. The parameters of reaction conditions, the type of metals and steric effects of coordinative ligands had influences on the catalytic properties.     

Tetrathiophosphoric acid tri(1-phenylethyl) ester and1-phenylethyl-diphenylphosphinodithioate as controlled radical polymerization agents

Polystyrene and polystyrene-b-polyvinylacetate have been prepared in presence of either tetrathiophosphoric acidtri(1-phenylethyl) ester 1 or 1-phenylethyl-diphenylphosphinodithioate 2 under radical conditions. From kinetic studies performed with or without 1 or 2, it was shown that the polymerization presents the criteria of living/controlled polymerization.