Silicone‐modified graphene oxide fillers via the Piers‐Rubinsztajn reaction

While graphene or graphene oxide can make significant improvements in the properties of a wide variety of polymeric materials, their incorporation can be challenged by incompatibility with the polymeric matrix. The modification of graphene oxide with silicones or silanes using the Piers‐Rubinsztajn reaction improves dispersibility in nonpolar materials, including organic solvents and silicone pre‐elastomers. A high loading (up to 10 wt %) of modified graphene oxide in silicone elastomers could be achieved, which resulted in enhanced mechanical performance and reduced gas permeability. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2379–2385     

Effect of solvent on glass transition temperature in chemically modified polyvinyl chloride (PVC)

Polyvinylchloride has been chemically modified with sodium benzene thiolate at different temperatures, in solvents promoting the formation of polymer gels, in solvents favoring light polymer interactions and in the absence of solvent, that is, in the melt. From the¹³C-NMR results it is shown that the substitution reactions on PVC, in all media and temperatures studied, are stereospecific and the nature of substituted chlorines the same.The glass transition temperature of modified polymers has been studied by differential scanning calorimetry. The glass transition temperature of the modified polymers in the absence of solvent decreases linearly with degree of substitution. When the reaction is carried out in solvents containing carbonyl groups, such as diethyl malonate, cyclohexanone and 2-butanone, the evolution of the glass transition up to about 25% substitution does not follow the above behavior. At higher levels of substitution the evolution ofT _g is similar to that in the melt. For the ether-containing solvents, such as tetrahydrofurane and dioxane, the evolution lies between the two previous curves.When the reactions of PVC with sodium benzene thiolate are carried out in cyclohexanone at different temperatures, between 15–90°C, the evolution of the glass transition temperature with conversion is different for each temperature, and if the reaction temperature increases, the slope of the initial part moves to that in the absence of solvent.These results are related to the formation of PVC gels or interactions. As the nature and percentage of substituted chlorine for a given chemical composition are the same in all the solvents and conditions studied, we propose that Cl-atoms of isotactic and/or heterotactic configurations are implied in the formation of PVC gels or interactions.     

Functionalized graphene oxide-reinforced electrospun carbon nanofibers as ultrathin supercapacitor electrode

Graphene oxide has been used widely as a starting precursor for applications that cater to the needs of tunable graphene. However, the hydrophilic characteristic limits their application, especially in a hydrophobic condition. Herein, a novel non-covalent surface modification approach towards graphene oxide was conducted via a UV-induced photo-polymerization technique that involves two major routes; a UV-sensitive initiator embedded via pi-pi interactions on the graphene planar rings, and the polymerization of hydrophobic polymeric chains along the surface. The functionalized graphene oxide successfully achieved the desired hydrophobicity as it displayed the characteristic of being readily dissolved in organic solvent. Upon its addition into a polymeric solution and subjected to an electrospinning process,non-woven random nanofibers embedded with graphene oxide sheets were obtained. The prepared polymeric nanofibers were subjected to two-step thermal treatments that eventually converted the polymeric chains into a carbon-rich conductive structure. A unique morphology was observed upon the addition of the functionalized graphene oxide, whereby the sheets were embedded and intercalated within the carbon nanofibers and formed a continuous structure. This reinforcement effectively enhanced the electrochemical performance of the carbon nanofibers by recording a specific capacitance of up to 140.10 F/g at the current density of 1 A/g, which was approximately three folds more than that of pristine nanofibers.It also retained the capacitance up to 96.2% after 1000 vigorous charge/discharge cycles. This functionalization technique opens up a new pathway in tuning the solubility nature of graphene oxide towards the synthesis of a graphene oxide-reinforced polymeric structure.     

Effect of the conditions of transfer on the structure and optical properties of Langmuir graphene oxide films during deposition on a substrate

The effect the solvent and transfer pressure of graphene oxide (SLGO) Langmuir–Blodgett films on the physicochemical properties of monolayers, and on their structural and optical properties, is studied. Examination of the physicochemical properties of SLGO monolayers on subphase surfaces that are formed from SLGO dispersions in different organic solvents reveals that monolayer behavior is virtually independent of the solvent. Electron microscope and optical studies show that the monolayers formed from SLGO dispersions in DMF and acetone have the highest transfer coefficients. It is concluded that the structural heterogeneity of the surfaces of graphene oxide films results from simultaneous effect of electrostatic interactions between graphene oxide particles and Van der Waals interactions with the solvation shell of the particles. Studies focusing on the effect the pressure of transferring a graphene oxide monolayer onto the surface of a solid substrate has on structural features of LB films show that films produced at low surface pressures have more homogeneous structures.     

Preparation and characteristics of poly(benzoxazine-urethane)/graphene oxide composites: Toughness,mechanical and thermal properties

Poly(benzoxazine-urethane)/graphene oxide [poly(Bz-PU)/GO] composites were successfully prepared by blending benzoxazine (Bz) with graphene oxide (GO) and isocyanato (NCO)-terminated polyurethane prepolymer (PU), followed by thermally activated polymerization of the blends. The network was formed via the mutual reaction and intermolecular interaction among the hydroxyl of GO, NCO groups of PU and phenolic hydroxyl of Bz. The toughness shown from SEM images and tensile properties of polybenzoxazine (PBz) plastic composites can effectively be improved by alloying with PU and GO. The onset curing temperature and exothermic peak maximums of the polymerization obtained from differential scanning calorimetry decreased resulted from the GO addition. The thermogravimetric analysis showed that the incorporation of 0.5 wt% of GO slightly improved the thermal stability of poly(Bz-PU)/GO composites. Additionally, the storage modulus improved and the glass transition temperature (Tg) increased gradually as the increasing GO content not beyond a certain amount. Finally, the exothermic peaks of the polymerization were shifted to lower temperature, and the thermal stability increased for the ternary composites as the number average molecular weights (Mn) of polyol decreased.     

Nanocomposite membranes for organic solvent nanofiltration

Organic solvent nanofiltration (OSN) is a molecular separation method which offers a sustainable and reliable solution compared to the conventional energy-intensive separation processes. OSN can be successfully applied to several applications, such as food, pharmaceutical, petrochemical and fine-chemical industries. Current research on OSN membranes mainly focuses on polymeric materials due to the ease of processing, controlled formation of pores, lower fabrication costs and higher flexibility as compared with inorganic materials. However, there are some limitations for the polymeric membranes which can be partially surmounted by adding nanoscale fillers into the polymeric matrix to make nanocomposite membranes. This review aims to comprehensively evaluate and report the advances in nanocomposite membranes prepared by using either different nanoscale fillers or various fabrication methods for OSN applications. Nanoparticles that will be discussed include metal-organic framework, graphene oxide, carbon nanotubes, silica, titanium, gold, zeolite and other fillers. The incorporation of these nanoscale fillers into the polymeric membranes can positively influence the mechanical strength, chemical and thermal stability, hydrophilicity, solute selectivity and solvent permeance. This study may provide helpful insights to develop next-generation of OSN membranes for years to come.     

硅烷功能化石墨烯/硅树脂纳米复合材料的制备与表征

先用乙烯基三甲氧基硅烷(A-171)和二甲肼改性并还原氧化石墨烯(GO),制备A-171功能化的石墨烯(FG).研究结果表明A-171与GO上的羟基发生了反应,以共价键连接到了石墨烯的表面;FG能在四氢呋喃中均匀分散并且剥离成厚度约为0.9 nm的单一片层,其干燥后表面呈褶皱状.然后将FG与双组分硅树脂用溶液共混法制备了FG/硅树脂纳米复合材料.运用X射线衍射、扫描电子显微镜、动态热机械分析、拉伸试验等手段分析了复合材料的形态与性能,结果表明,与未处理过的石墨烯相比,FG在复合材料中有更好的分散和更强的界面作用.含0.5 wt%FG的复合材料的拉伸强度较硅树脂提高了87.7%,玻璃化温度提高了23.9℃,失重5%时的温度也提高了20.1℃.     

Preparation and investigation of tribological properties of ultra‐high molecular weight polyethylene (UHMWPE)/graphene oxide

This article has been devoted to investigation of the tribological properties of ultra‐high molecular polyethylene/graphene oxide nanocomposite. The nanocomposite of ultra‐high molecular polyethylene/graphene oxide was prepared with 0.5, 1.5, and 2.5 wt% of graphene oxide and with a molecular weight of 3.7 × 10⁶ by in‐situ polymerization using Ziegler–Natta catalyst. In this method, graphene oxide was used along with magnesium ethoxide as a novel bi‐support of the Ziegler–Natta catalyst. Analyzing the pin‐on‐disk test, the tribological properties of the nanocomposite, such as wear rate and mean friction coefficient, were investigated under the mentioned contents of graphene oxide. The results showed that an increase in graphene oxide content causes a reduction in both wear rate and mean coefficient friction. For instance, by adding only 5 wt% graphene oxide to the polymeric matrix, the wear rate and mean coefficient friction decreased about 34% and 3.8%, respectively. Also, the morphological properties of the nanocomposite were investigated by using X‐ray diffraction and scanning electron microscopy. In addition, thermal properties of the nanocomposite were analyzed using differential scanning calorimetry, under various contents of graphene oxide. The results of the morphological test indicated that the graphene oxide was completely exfoliated into the polymeric matrix without any agglomeration. Copyright © 2016 John Wiley & Sons, Ltd.     

Poly(ionic liquid)s as phase-transporter for graphene oxide liquid crystals from aqueous to non-polar organic phase via noncovalent functionalization

We synthesise a novel poly(ionic liquid) (PIL) and develop a procedure that allows the phase transfer of graphene oxides (GO) from water to organic solvent, retaining graphene oxide liquid crystal (GOLC) phase in various organic solvents, especially non-polar organic solvents. PIL ([PEP-MIM]DBS) is exploited in this procedure as a noncovalent functional material that is capable of transporting GO from aqueous to non-polar organic phase. PILs can decorate GO noncovalently and keep GO nano-sheets exfoliated in solid-state PILs/GO hybrids, which can well redisperse in organic solvents without any agglomeration. This expands the number of known solvents which can support GOLC phase to dimethyl formamide, dimethyl sulfoxide, acetonitrile, tetrahydrofuran, and a number of other non-polar organic solvents, many of which were not known to afford GOLC phase prior to this report, such as dichloromethane, tetrachloromethane, dichloroethane and tetrachloroethane.     

Investigation of swelling and diffusion in polymers by NMR imaging

The kinetics of diffusion in polymers ranges from simple Fickian diffusion to higher order diffusion, such as Case II diffusion^1-2). The conventional method for determining the characteristics of solvents into polymer matrices is by measuring the mass uptake of the polymer as the solvent penetrates the matrix. However, since such measurements perform observations at a macroscopic level, little information has been obtained relating to the nature of the solvent in the polymer matrix and the mechanisms of the processes that control the diffusion. Nuclear magnetic resonance (NMR) imaging (‘MRI’) has been used to observe the penetration of solvents into solid systems in realtime. The method provides a one- or more-dimensional image of the density and the mobility of the solvent in a material or of the network changes of the material itself due to the softening influence of the solvent. The first (imaging of the solvent) can be used for a quantitative measurement of the diffusion whereas the observation of the network gives information about the changing of the network (mobility, de-crystallization…) during the swelling process. For example the diffusion of organic solvents in some polymeric materials (natural rubber, water gels (PNIPAAm), and nematic diblock-copolymers) are investigated.     

Self-healing Supramolecular Polymer Composites by Hydrogen Bonding Interactions between Hyperbranched Polymer and Graphene Oxide

A self-healing supramolecular polymer composite (HSP-GO) was designed and prepared via incorporation of modified graphene oxide to hyperbranched polymer by hydrogen-bonding interactions.The polymer matrix based on amino-terminated hyperbranched polymer (HSP-NH2) was synthesized by carboxylation,Curtius rearrangement,and amination of hydroxyl-terminated hyperbranched polyester (HP-OH),while the modified graphene oxide was prepared by transformation of hydroxyl to isocyanate and further to carbamate ester.Spectroscopic methods were utilized to characterize the obtained polymer composites.Stress-strain test was selected to carefully study the self-healing property of HSP-GO.It is found that a small amount of modified graphene oxide (up to 2 wt％) improves the glass transition temperature (Tg),tensile strength,Young's modulus,and self-healing efficiency of the polymer composites.After healed at room temperature for 10 min,the addition of modified graphene oxide improves the self-healing efficiency to 3 7％ of its original tensile strength.The experiment result shows that the self-healing efficiency is related to the density of hydrogen bonding site and the molecular movement.     

Graphene oxide dispersions in organic solvents

The dispersion behavior of graphene oxide in different organic solvents has been investigated. As-prepared graphite oxide could be dispersed in N, N-dimethylformamide, N-methyl-2-pyrrolidone, tetrahydrofuran, and ethylene glycol. In all of these solvents, full exfoliation of the graphite oxide material into individual, single-layer graphene oxide sheets was achieved by sonication. The graphene oxide dispersions exhibited long-term stability and were made of sheets between a few hundred nanometers and a few micrometers large, similar to the case of graphene oxide dispersions in water. These results should facilitate the manipulation and processing of graphene-based materials for different applications.     

Sol–gel derived nanostructured nickel oxide films: Effect of solvent on crystallographic orientations

Nickel oxide films were deposited onto glass substrates by sol–gel dip coating method using solvents of different polarities without any catalysts, templates or surfactants. Methanol, 1,4-butanediol, ethanol, and 2-propanol were used as solvents. The structural, optical and electrical properties of NiO films were investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM), UV–visible spectroscopy and Hall effect measurements, respectively. Nickel oxide thin films with cubic phase crystal structure of various preferred orientations were obtained in the different solvents. The XRD results showed that films deposited from solution using higher polar solvents develop a (1 1 1) preferred orientation, while the (2 0 0)-orientated films were obtained using lower polar solvents. The average particle size increases with viscosity of solvents. Surface morphology of the nickel oxide film consisted of nanoparticles with uniform coverage of the substrate surface. The solvent of higher viscosity induced larger particle size. Band gap narrowing from 4.42 to 3.87 eV was observed using different solvents. The lower resistivity and Hall coefficient was obtained for prepared NiO films using higher polar solvents. The relationships between solvent physicochemical properties, preferred orientation, structural, optical and electrical properties of NiO films were investigated.     

Microphase separation in polybenzoxazine thermosets containing benzoxazine-terminated poly(ethylene oxide) telechelics

Benzoxazine-terminated poly(ethylene oxide) telechelics (Ba-terminated PEO) was synthesized and incorporated into polybenzoxazine to obtain the nanostructured thermosets. The morphology of the thermosets was investigated by means of atomic force microscopy (AFM), small angle X-ray scattering (SAXS) and dynamic mechanical analysis (DMA). The formation of the nanophase structures in the thermosetting composites was addressed on the basis of the mechanism of reaction-induced microphase separation (RIMPS), which was in marked contrast to the case of the binary thermosetting blends of polybenzoxazine with hydroxyl-terminated poly(ethylene oxide). The occurrence of RIMPS resulted from the copolymerization reaction of the end groups of Ba-terminated PEO telechelics with the precursor of thermosetting matrix (i.e., benzoxazine), which suppressed the occurrence of the macroscopic phase separation. It was found that the formation of the nanostructures has a significant effect on the melting behavior of PEO in the thermosets, thermal transition properties of the PBZ thermosets.     

Electrochemical property of graphene oxide/polyaniline composite prepared by in situ interfacial polymerization

Graphene oxide–polyaniline composites were synthesized by an interfacial method using two green solvents, water and an ionic liquid (1-butyl-3-methylimidazolium tetrafluoroborate), as the two phases. The interfacial polymerization of aniline was carried out at room temperature in the presence of graphene oxide dispersed in the aqueous phase. The analysis revealed the surface of the graphene sheets to be coated with a smooth thin layer of polyaniline. The thermal stability of the composites was much better than that of bare graphene oxide. The composites were used to modify the glass carbon electrodes for the chemical detection of hydrogen peroxide in aqueous media. This method is a facile, efficient, and green route for the development of doped polyaniline materials suitable for chemical sensors.     

Effect of the solvent nature on the rheological properties of concentrated solutions of various polymers

The paper compares the viscous, high-elastic and viscoelastic properties of solutions in various solvents of four polymers (polyisobutylene, polystyrene, polymethyl methacrylate and acetyl cellulose) differing in chain rigidity and the intensity of molecular interaction, over a wide range of compositions for the linear region of the mechanical behaviour of these systems. For solutions of polyisobutylene and polystyrene, the effect of the nature of the solvent on the viscosity is determined by the inherent viscosity of the solvent and by the fact that solutions under isothermal conditions are not in corresponding states with respect to their glass transition temperatures. The high-elasticity modulus of polyisobutylene and polystyrene solutions is independent of the nature of the solvent and of temperature. This indicates that the fluctuating network of entanglements is insensitive to the nature of the solvent and that the free volume plays the determining role in the behaviour of these solutions. Solutions of acetyl cellulose and polymethyl methacrylate are characterized by a very strong dependence of the viscosity on the nature of the solvent (which cannot be explained by notions valid for solutions of the first two polymers) and also by a change in the high-elasticity modulus with variation in the nature of the solvent and temperature. This proves that the properties of solutions of polar polymers are determined both by the free volume and the density of the fluctuating network, which changes with the solvent and temperature. The shape of the relaxation spectra of solutions of various polydisperse polymers in solvents of different natures is the same, while the specific properties of the solutions are associated with the position of the spectra on the time scale, which determines the fundamental constants of the solutions, viz. the zero shear viscosity and the initial high-elasticity modulus.     

High‐molecular‐weight AB‐type benzoxazines as new precursors for high‐performance thermosets

Novel high‐molecular‐weight polybenzoxazine precursors, namely AB‐type benzoxazine precursors, were synthesized from aminophenols and formaldehyde. Both ¹H NMR and IR confirmed the structure of the precursors, indicating the presence of a cyclic benzoxazine structure in the backbone of the precursors. The weight‐average molecular weight was estimated by size exclusion chromatography to be to in the range of 1300–4500. The precursors gave self‐standing thin films when their solutions were cast in dioxane over glass plates and dried, and upon a gradual thermal cure up to 250 °C, they afforded polybenzoxazine films. The viscoelastic analyses showed that the glass transition temperatures of the polybenzoxazine films obtained from these novel precursors were as high as 260–300 °C. Thermogravimetric analysis results indicated that the onset of decomposition and the char yield of the thermosets derived from these AB‐type precursors were higher than those of traditional polybenzoxazine. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1878–1888, 2007.     

Morphology and physical properties of poly(ethylene oxide) loaded graphene nanocomposites prepared by two different techniques

Organic–inorganic hybrids are artificially created structures presenting novel properties not exhibited by either of the component materials alone. In this contribution one addresses processing, morphology and properties of polymer nanocomposites reinforced graphene. First, synthesis routes to graphite oxide (GO) and foliated graphene sheets (FGS) are illustrated. Physical characterization of these graphene sheets were conducted using atomic force microscopy and X-ray diffraction techniques. Processing, structure and properties of graphene/poly(ethylene oxide) (PEO) nanocomposites are discussed. FGS was dispersed into PEO via two different composite manufacturing techniques: melt compounding and solvent mixing. Morphology of dispersed graphene and properties from different blending routes are compared. TEM showed that graphene distributed parallel to the composite surface using solvent method, while distributed randomly in melt blended method. Optical measurements indicated that the transparency of PEO/graphene prepared by solvent method is higher than that of melt blended method in the visible region. Electrical conductivity measurements are employed to evaluate threshold concentration for rigidity and connectivity percolation. The percolation concentration of the composites prepared by solvent method is less than those of melt blended method. The mechanical performance of the composites prepared by solvent method is higher than melt blended. Halpin–Tsai model has been used to confirm the distribution of the graphene into PEO by the two different processing techniques.     

Microphase coexistence in polymeric brushes

A collapse of polymeric brushes in a solvent can be induced by a change in external conditions, for example, solvent quality or its temperature. The systems with following specific interactions are considered in this paper, namely, polyelectrolyte brushes, amphiphilic brushes in a mixture of incompatible solvents, and brushes with possibility of liquid-crystalline ordering of polymer segments. For all the systems it is shown that the brush collapse can be observed under certain conditions, and it occurs through a microphase segregation. There are two microphases of different densities that coexist in the brush. The effect is caused by general properties of the swollen phase of polymeric brush and hence appears at all types of the interactions that can induce a phase transition of the brush into collapsed state.     

Pipette‐tip solid‐phase extraction based on deep eutectic solvent modified graphene for the determination of sulfamerazine in river water

A green and novel deep eutectic solvent modified graphene was prepared and used as a neutral adsorbent for the rapid determination of sulfamerazine in a river water sample by pipette‐tip solid‐phase extraction. Compared with conventional graphene, deep eutectic solvent modified graphene can change the surface of graphene with wrinkled structure and higher selective extraction ability. The properties of deep eutectic solvent modified graphene and graphene were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, and thermogravimetric analysis. Static adsorption showed deep eutectic solvent modified graphene had a higher adsorption ability (18.62 mg/g) than graphene. Under the optimum conditions, factors such as kinds of washing solvents and elution solvents and volume of elution solvent were evaluated. The limits of detection and quantification were 0.01 and 0.03 μg/mL, respectively. The method recoveries of sulfamerazine were in the range of 91.01–96.82% with associated intraday relative standard deviations ranging from 1.63 to 3.46% and interday relative standard deviations ranging from 0.68 to 3.84%. Deep eutectic solvent modified graphene showed satisfactory results (recovery was 95.38%) and potential for rapid purification of sulfamerazine in river water sample in combination with the pipette‐tip solid‐phase extraction method.