Computer simulation and optimization of preparative thin-layer chromatography under conditions of isocratic and stepwise gradient elution

Summary An equilibrium sandwich chamber for continuous thin-layer chromatography was used to study overloaded systems. Mixtures of two or three dyes were used as the model samples, and wide starting zones were formed (volume-overloaded systems). The movement of the zones was recorded during continuous elution. The effect of sample volume and the mode of development (isocratic or gradient) on the maximum separation yield was investigated. A computer program was developed for the calculation of the final R_F values for the front and rear edges of the bands.Satisfactory agreement was found between the experimental R_F values of zone boundaries and the values predicted by computer simulation.Presented at the 2nd International Symposium on Preparative and Up-Scale Liquid Chromatography, February 1–3, 1988, Baden-Baden (FRG).     

Extraction-chromatographic separation of137mBa from137Cs

The possibilities of extraction-chromatographic separation of^137mBa from¹³⁷Cs in genetic succession were studied, using columns filled with support beads loaded with the extractant H⁺[)–(3)–1,2–B₉C₂H₁₁]₂Co^–, further referred to as dicarbolide-H⁺, in nitrobenzene. The dependence of the amount of separable activities on experimental conditions was established. Optimal conditions were selected for the separation process. The effects of isotopic and nonisotopic carriers of^137mBa on the separation and the degree on saturation of extraction-chromatographic column with Ba²⁺ ions were evaluated. The effects of acidity of the elution solutions, of flow-through velocity, the amount of elution solution and the quality of carrier beads on the separation process were assessed. The extraction-chromatographic yield was calculated and the number of possible repeated elution cycles for^137mBa with saline and some other eluents was determined.     

Peak parking technique for the simultaneous determination of anions and cations

An ion chromatography method is described for the simultaneous determination of anions (Cl^–, NO₃^–, and SO₄^2–) and cations (Na⁺, NH₄⁺, K⁺, Mg²⁺, and Ca²⁺) using a single pump, a single eluent and a single detector. An anion-exchange column modified with chondroitin sulfate C facilitated the elution of the above three anions using 5 mM tartaric acid as the eluent in isocratic mode, whereas the same eluent facilitated the separation of the above five cations on a commercially-available cation-exchange column. The separation columns were connected in series via two six-port switching valves, so the required cation-exchange or anion-exchange separation could be carried out by selecting the appropriate positions for the switching valves. The separations were completed in 30 min.     

Isolation and purification of an aminoacylase fromAspergillus oryzae

An aminoacylase (EC 3.5.1.14) has been isolated from a surface culture of the fungusAspergillus oryzae (amilorizin P10X) with a 764-fold degree of purification, an activity yield of 32.7%, and a specific activity in relation to the hydrolysis of N-acetyl-D,L-methionine of 99.3 a.u./o.u. The scheme of the purification of the aminoacylase fromAspergillus oryzae includes: extraction at pH 6.7, precipitation with ammonium sulfate (30 and 80% saturation), gel filtration on Acrilex P-150 (pH 7.5), ion-exchange chromatography on amino-Silochrom Cx-1,5 (mean pore radius 790 Å); the sorption of the enzyme takes place at pH 6.2 and elution with 0.05 M borate buffer, pH 8.0; ion-exchange chromatography on AH-Sepharose 4B at pH 8.0, with elution by a stepwise increase in the concentration of sodium chloride to 0.25 M; and, finally, gel filtration on Sephadex G-200 (pH 8.0). According to the results of disk electrophoresis in 7.5% polyacrylamide gel in a Tris-glycine systems of buffers with a separation pH of 8.9 in the presence of Co²⁺ ions (10^–5 M) of theAspergillus oryzae aminoacylase, two components possessing enzymatic activity were detected, with R_f 0.53 (major component) and R_f 0.63 (minor component).All-Union Scientific-Research Institute for the Genetics and Breeding of Industrial Microorganisms, Moscow. Translated from Khimiya Prirodnykh Soedinenii, No. 5, pp. 619–624, September–October, 1983.     

Separation of magnesium isotopes by NTOE bonded merrifield peptide resin

Separation of magnesium isotopes was investigated by chemical ion exchange with synthesyzed 1,12-diaza-3,4:9,10-dibenzo-5,8-dioxacyclo pentadecane(NTOE) bonded merrifield peptide resin using elution chromatographic technique. The capacity of novel diazacrown ion exchanger was 0.29 meq/g dry resin. The heavier isotopes of magnesium were concentrated in the solution phase, while the lighter isotopes were enriched in the resin phase. The glass ion exchange column used in our experiment was 32 cm long with inner diameter of 0.2 cm, and 0.5M NH₄Cl solution was used as an eluent. The single stage separation factor was determined according to the method of GLUECKAUF from the elution curve and isotopic assays. The separation factors of ²⁴Mg²⁺–²⁵Mg²⁺, ²⁴Mg²⁺–²⁶Mg²⁺, and ²⁵Mg²⁺–₂₆Mg²⁺ were 1.063, 1.080, and 1.021, respectively.     

Micropreparative TLC Separation of Large Sample Volumes. Frontal + Elution Chromatography

Abstract

It is demonstrated that mixtures containing few compounds can be applied as wide zones on the edge of the thin layer using a sandwich tank with glass distributor. The mixture is partially separated during application (frontal chromatography) so that subsequent elution accomplishes complete separation. Using 5 × 20 cm plates of silica, 0.5 mm thick, 1 - 3 ml samples were separated easily which permitted elution of 3 - 9 of separated compounds from a single plate.     

Nonaqueous electrochromatography on continuous bed columns of sol–gel bonded large-pore C18 material: separation of retinyl esters

A nonaqueous electrochromatographic reversed-phase separation method for retinyl esters using continuous bed columns has been developed. The packing material 7 μm Nucleosil 4000 Å C₁₈ was sol–gel bonded in 180 μm I.D. capillaries. The mobile phase used was 2.5 mM lithium acetate in N,N-dimethylformamide–acetonitrile–methanol (2+7+1, v/v). At 350 V/cm and 30°C, this mobile phase composition gave rise to an electroosmotic flow of 1 mm/s. No Joule heating nor bubble formation were observed even at 625 V/cm (17 μA). With a 36 cm L_eff column complete separation of the commercially available and synthesized standards (all-trans-retinyl acetate, palmitate, heptadecanoate, stearate, oleoate, and linoleoate) was obtained within 10 min. The within-day and between-day variations of retention times of all-trans-retinyl palmitate were <0.3% relative standard deviation (RSD) (n=3) and <2% RSD (n=6), respectively. The within-day and between-day variations of peak areas were both <2% (both n=3). The columns were used for more than 1 month without degradation. Liver extracts from arctic seal were analyzed.     

Separation of mixtures of permanent gases and light hydrocarbons on spherical carbon molecular sieves by gas-solid chromatography

Summary Experimental results are presented on the application of Carbosieve S (Supelco) and Spherocarb (Analabs) spherical carbon molecular sieves for the gas chromatographic separation of mixtures of permanent gases and C₁–C₃ hydrocarbons using a single column or two columns in series. At a programmed temperature of 35–300°C, good separation of the sample components was obtained when using helium as the carrier gas. When hydrogen was used as the carrier gas and the analysis was carried out under isothermal conditions the elution sequence of oxygen and nitrogen reversed as the temperature was increased. This behaviour was observed within a temperature range of 35–225°C for Carbosieve S, and within a temperature range of 35–300°C for Spherocarb.     

Isolation of oxygen-containing monoterpenoids of essential oils by preparative adsorption chromatography with gradient elution

A simple and effective procedure for the comparative chromatography of 1–2 ml of essential oils on a 40×250 mm column of silica gel with gradient elution by hexane-diethyl ether has been developed. A simple system of preparing the mobile phase permits the creation of a continuous gradient during chromatography. The efficacy of the procedure has been shown taking as an example the isolation of fenchone from fennel essential oil.A. V. Dumanskii Institute of Colloid Chemistry and the Chemistry of Water, Ukrainian Academy of Sciences, Kiev. Translated from Khimiya Prirodnykh Soedinenii, No. 5, pp. 634–637, September–October, 1991.     

The determination of surface polarity of bismuth-molybdenum oxidation catalysts by gas chromatography

Summary The adsorption of aromatic and aliphatic hydrocarbons was investigated using gas chromatography on Bi₂O₃, MoO₃ and mixed Bi–Mo oxidation catalysts. As a measure of polarity of a catalyst, the difference between the chemical potential of aromatic and aliphatic hydrocarbons at the same surface concentration was used. The chemical potentials were estimated from elution chromatographic data. The data for C₆–C₉ methylbenzenes and C₆–C₁₂ n-alkanes were obtained in the temperature range 60–300°C in nitrogen as a carrier gas. Using air as carrier gas, introduction of water pulses on a catalyst does not change the elution characteristics. The elution of alkenes, alkynes, dienes and carbonyl compounds was disturbed by reaction of these compounds on the surface. The polarity of catalysts decreased in the order mixed Bi–Mo catalysts, MoO₃, Bi₂O₃. The polarities observed are compared with polarities of some other solids and liquids and the role of polarity of the surface in catalytic oxidation reactions is briefly discussed.     

Investigation of the separation of scandium and rare earth elements from red mud by use of reversed-phase HPLC

A chromatographic method has been developed for separation and determination of scandium (Sc) and rare earth elements (REEs) in samples from a red mud (RM)-utilization process. Reversed-phase high-performance liquid chromatography (RP-HPLC) with post-column derivatization using 4-(2-pyridylazo)-resorcinol (PAR) and UV–visible detection at 520 nm was tested using different gradient elution profiles and pH values to optimize separation and recovery, primarily for Sc but also for yttrium and the individual lanthanides, from iron present in the samples. The separation was performed in less than 20 min by use of a mobile phase gradient. The concentration of -hydroxyisobutyric acid (-HIBA), as eluent, was altered from 0.06 to 0.4 mol L^–1 (pH 3.7) and 0.01 mol L^–1 sodium salt n-octane sulfonic acid (OS) was used as modifier. Very low detection limits in the nanogram range and a good resolution for Sc and REEs except for Y/Dy were achieved. Before application of the method to the red mud samples and to the corresponding bauxites, Sc and REEs were leached from red mud with 0.6 mol L^–1 HNO₃ and mostly separated, as a group, from the main elements by ion exchange/selective elution (6 mol L^–1 HNO₃) in accordance with a pilot-plant process developed in this laboratory. After evaporation of the eluent to dryness the extracted elements were re-dissolved in the mobile phase. By use of this chromatographic method Sc, which is the most expensive of the elements investigated and occurs in economically interesting concentrations in red mud, could be separated not only from co-existing Fe but also from Y/Dy, Yb, Er, Ho, Gd, Eu, Sm, Nd, Pr, Ce and La. All the elements investigated were individually recovered. Their recoveries were found to be nearly quantitative.     

Synthesis and applications of poly(acryl<Emphasis Type="Italic">p</Emphasis>-aminobenzenesulfonamideamidine-<Emphasis Type="Italic">p</Emphasis>-aminobenzenesulfonylamide) chelating fiber for pre-concentrating and separating trace Bi(III), Hg(III), Au(III) and Pd(IV) from solution samples

Poly(acrylp-aminobenzenesulfonamideamidine-p-aminobenzenesulfonylamide) chelating fiber containing "S", "N", and "O" elements was synthesized from polyacrylonitrile fiber and p-aminobenzene sulfonamide and used to enrich and separate trace Bi(III), Hg(III), Au(III), and Pd(IV) ions from wastewater and ore sample solution. The enrichment acidity, flow rate, elution conditions, reuse, interference ions, saturated adsorption capacity, constant of adsorption rate, analytical accuracy, and actual samples on chelating fiber were investigated by means of inductively coupled plasma optical emission spectrometry (ICP-OES) with satisfactory results. Solutions of 100 ng mL^–1 of Bi(III), Hg(III), Au(III), and Pd(IV) ions can be enriched quantitatively by this chelating fiber at a rate of 1.0 mL min^–1 at pH 4 and desorbed quantitatively with 20 mL of 0.25 M HCl and 2% CS(NH₂)₂ solution at 50 °C (with recovery 97%). When the chelating fiber was reused for 20 times, the recoveries of the analyzed ions enriched by the fiber were still over 95% (except for Hg(III)). One thousand-fold excesses of Mn²⁺, Ca²⁺, Zn²⁺, Mg²⁺, Fe³⁺, Cu²⁺, Ni²⁺, Al³⁺, and Ba²⁺ ions and thousands-fold excesses of Na⁺ and K⁺ cause little interference in the pre-concentration and determination of the analyzed ions. The saturated adsorption capacity of Bi(III), Hg(III), Au(III), and Pd(IV) was 4.850×10^–4, 3.235×10^–4, 2.807×10^–4, and 3.386×10^–4 mol g^–1, respectively. The constants of adsorption rate were 0.409 min^–1 for Bi, 0.122 min^–1 for Hg, 0.039 min^–1 for Au, and 0.080 min^–1 for Pd. The relative standard deviations (RSDs) for the enrichment and determination of 10 ng mL^–1 Bi(III), Hg(III), Au(III), and Pd(IV) were lower than 2.3%. The results obtained for these ions in actual samples by this method were basically in agreement with the given values with average errors of less than 1.0%. FT-IR spectra shows that the existence of –SO₂–Ar, –H₂N–Ar, O=C–NH–, HN=C–NH–, and –HN–SO₂ functional groups are verified in the chelating fiber. From the FT-IR spectroscopy, we can see that Hg(III), Au(III), and Pd(IV) are mainly combined with nitrogen and sulfur (or oxygen), and Bi(III) is mainly combined with nitrogen (or oxygen) of the groups to form a chelating complex.     

On-line preconcentration and GFAAS determination of trace metals in waters

An on-line separation preconcentration system coupled to electrothermal (graphite furnace) atomic absorption spectrometry was developed. A miniature column packed with iminodiacetic acid ethyl cellulose (IDAEC) was inserted into the loop. A peristaltic pump was used to deliver solutions. A flow of air was driven into the packed column, evacuating it between sample loading, washing and elution. The retained analyte was introduced on-line to graphite furnace using countercurrent elution with HNO₃. The system was applied for the determination of V, Co and Pb in medicinal mineral water samples, and nickel in sea water samples. The detection limits (3σ) were 0.058, 0.022, 0.067, 0.062 μg/l for Co, Pb, V, and Ni, respectively. The R.S.D. (n=5) was <5% at 0.4–1.0 μg/l concentration range.     

Enrichment of Magnesium Isotopes by 2′-Aminomethyl-15-Crown-5 Bonded Merrifield Peptide Resin

Magnesium isotope enrichment was investigated by chemical ion exchange with a synthesized 2-aminomethyl-15-crown-5 bonded Merrifield peptide resin using elution chromatography. The capacity of the novel crown ion exchanger was found to be 2.25 meq/g dry resin. The heavier isotopes of magnesium were enriched in the solution phase, while the lighter isotopes were enriched in the resin phase. The separation factor was determined according to the method of GLUECKAUF from the elution curve and isotopic assays. The separation factors of ²⁴Mg²⁺–²⁵Mg²⁺, ²⁴Mg²⁺–²⁶Mg²⁺, and ²⁵Mg²⁺–²⁶Mg²⁺ isotope pair fractionations were 1.00095, 1.00857, and 1.00014, respectively.     

Separation of pantothenic acid derivatives by reversed-phase high-performance liquid chromatography

A variant of the use of reversed-phase high-performance liquid chromatography is described which permits the separation of pantothenic acid derivatives. The stationary phase used was a Bondapak-C₁₈ (4.1 × 250 mm column; 4.6 × 50 nm precolumn). Elution was performed in the isocratic regime using as mobile phase 20 M potassium phosphate buffer (pH 5.0)-methanol (91.5:8.5). The rate of elution was 1 ml/min. Retention times in the column for phosphopantothenate, pantothenate, phosphopantetheine, CoA, and dephosphoCoA were about 3.5, 6, 10.5, 16, and 42 min, respectively. This method, with radioactive detection, can be used for the analysis of pantothenic acid derivatives in liver extracts. One hour after white rats had been injected with [¹⁴C]pantothenic acid, the abovementioned components (with the exception of dephosphoCoA) contained the label in a ratio of 4:18:54:24.Institute of Biochemistry, Academy of Sciences of the Belorussian SSR, Grodno. Translated from Khimiya Prirodynkh Soedinenii, No. 6, pp. 855–858, November–December, 1988.     

Rapid and sensitive method for the determination of acetaldehyde in fuel ethanol by high-performance liquid chromatography with UV–Vis detection

A high-performance liquid chromatography (HPLC) method for the determination of acetaldehyde in fuel ethanol was developed. Acetaldehyde was derivatized with 0.900 mL 2,4-dinitrophenylhydrazine (DNPHi) reagent and 50 L phosphoric acid 1 mol L^–1 at a controlled room temperature of 15°C for 20 min. The separation of acetaldehyde-DNPH (ADNPH) was carried out on a Shimadzu Shim-pack C₁₈ column, using methanol/LiCl_(aq) 1.0 mM (80/20, v/v) as a mobile phase under isocratic elution and UV–Vis detection at 365 nm. The standard curve of ADNPH was linear in the range 3–300 mg L^–1 per injection (20 L) and the limit of detection (LOD) for acetaldehyde was 2.03 g L^–1, with a correlation coefficient greater than 0.999 and a precision (relative standard deviation, RSD) of 5.6% (n=5). Recovery studies were performed by fortifying fuel samples with acetaldehyde at various concentrations and the results were in the range 98.7–102%, with a coefficient of variation (CV) from 0.2% to 7.2%. Several fuel samples collected from various gas stations were analyzed and the method was successfully applied to the analysis of acetaldehyde in fuel ethanol samples.     

Determination of Amino Acid Enantiomers in Pharmaceuticals by Reversed-Phase High-Performance Liquid Chromatography

Precolumn derivatization with the reagent o-phthalic aldehyde/N-acetyl-L-cysteine (OPA/NAC) was used for the determination of amino acid enantiomers by reversed-phase high-performance liquid chromatography. The influence of the composition and pH of the eluent on the separation of the resulting derivatives was studied with the example of four amino acids. It was found that the highest selectivity and efficiency of the separation of OPA/NAC derivatives of amino acids is attained with the use of the eluent methanol–0.01 M Na₂HPO₄ (pH 6.0). The optimum composition of the mobile phase and conditions of the gradient elution were selected for the separation of a mixture of 20 amino acid derivatives. A procedure was developed for the determination of amino acid enantiomers in parenteral nutrition preparations. The procedure was used for the determination of D-isomers of arginine, alanine, methionine, phenylalanine, and leucine in the preparation Polyamine.     

Speciation analysis of aluminium and aluminium fluoride complexes by HPIC-UVVIS

The study presents a new analytical method for speciation analysis in fractionation of aluminium fluoride complexes and free Al³⁺ in soil samples. Aluminium speciation was studied in model solutions and soil extract samples by means of high performance ion chromatography (HPIC) with UV-VIS detection using post-column reaction with tiron for the separation and detection of aluminium fluoride complex and Al³⁺ forms during one analysis. The paper presents particular stages of the chromatographic process optimization involving selecting the appropriate eluent strength, type of elution or concentration and quantity of derivatization reagent. HPIC was performed on a bifunctional analytical column Dionex IonPac CS5A. The use of gradient elution and the eluents A: 1 M NH₄Cl and B: water acidified to pH of eluent phase, enabled full separation of fluoride aluminium forms as AlF₂⁺, AlF₃⁰, AlF₄⁻ (first signal), AlF²⁺ (second signal) and form Al³⁺ in a single analytical procedure. The proposed new method HPIC-UVVIS was applied successfully in the quantitative and qualitative analysis of soil samples.     

Chromatographic separation of magnesium isotopes by monoazacrown bonded Merrifield peptide resins

Magnesium isotope separation was investigated by chemical ion exchange with the 1-aza-12-crown-4 (I) and the 1-aza-18-crown-6 (II) bonded Merrifield peptide resin using an elution chromatographic technique. The capacities of each novel monoazacrown ion exchanger were 1.0 meq/g for (I) and 2.3 meq/g for (II) bonded Merrifield peptide resins, respectively. The single stage separation factor was determined according to the method of Glueckauf from the elution curves and isotopic assays. The separation factors of magnesium isotope pairs, ²⁴Mg²⁺–²⁵Mg²⁺, ²⁴Mg²⁺–²⁶Mg²⁺ and ²⁵Mg²⁺–²⁶Mg²⁺ were 1.015, 1.029, and 1.014 for (I) and 1.012, 1.024, and 1.009 for (II) bonded Merrifield peptide resins, respectively.     

Simultaneous determination of anions and cations by ion-exclusion chromatography–cation-exchange chromatography with tartaric acid/18-crown-6 as eluent

Ion-exclusion chromatography–cation-exchange chromatography was developed for the simultaneous separation of common inorganic anions and cations (Cl⁻, NO₃⁻ and SO₄²⁻; Na⁺, NH₄⁺, K⁺, Mg²⁺ and Ca²⁺) on a weakly acidic cation-exchange column by elution with weak acid. Generally, the resolution among these monovalent cations was only moderate, thereby hindering the determination of these analytes in natural-water samples. Therefore, 18-crown-6 was added to the eluent to improve the resolution. A good separation of these anions and cations on a weakly acidic cation-exchange column was achieved in 30 min by elution with 5 mM tartaric acid/6 mM 18-crown-6/methanol–water (7.5:92.5). The ion-exclusion chromatography–cation-exchange chromatography method developed here was successfully applied to the separation of major anions and cations in an environmental water sample.