Upshot of Chemical Species and Nonlinear Thermal Radiation on Oldroyd-B Nanofluid Flow Past a Bi-directional Stretched Surface with Heat Generation/Absorption in a Porous Media

A three-dimensional mathematical model is developed to examine the flow of nonlinear thermal radiation Oldroyd-B nanofluid past a bidirectional linearly stretched surface in a porous medium. The flow is induced by temperature dependent thermal conductivity, chemical reaction and convective heat and mass conditions. Novel characteristics of Brownian motion and thermophoresis are accompanied by magnetohydrodynamic and heat generation/absorption.Self-similar transformations are employed to convert the system of nonlinear partial differential equations to a system of ordinary differential equations with high nonlinearity and are solved by strong analytic technique named as Homotopy Analysis method(HAM). Effects of varied arising parameters on involved distributions are reflected through graphical illustrations. From this study, it is perceived that strong magnetic field hinders the fluid's motion and leads to rise in temperature that eventually lowers heat transfer rate from the surface. Further, decrease in heat transfer rate is also observed for enhanced values of thermal radiation parameter. To validate our results, a comparison with already published paper in limiting case is also given and results are found in excellent oncurrence; hence reliable results are being presented.     

Upshot of Chemical Species and Nonlinear Thermal Radiation on Oldroyd-B Nanofluid Flow Past a Bi-directional Stretched Surface with Heat Generation/Absorption ina Porous Media

A three-dimensional mathematical model is developed to examine the flow of nonlinear thermal radiation Oldroyd-B nanofluid past a bidirectional linearly stretched surface in a porous medium. The flow is induced by temperature dependent thermal conductivity, chemical reaction and convective heat and mass conditions. Novel characteristics of Brownian motion and thermophoresis are accompanied by magnetohydrodynamic and heat generation/absorption. Self-similar transformations are employed to convert the system of nonlinear partial differential equations to a system of ordinary differential equations with high nonlinearity and are solved by strong analytic technique named as Homotopy Analysis method (HAM). Effects of varied arising parameters on involved distributions are reflected through graphical illustrations. From this study, it is perceived that strong magnetic field hinders the fluid's motion and leads to rise in temperature that eventually lowers heat transfer rate from the surface. Further, decrease in heat transfer rate is also observed for enhanced values of thermal radiation parameter. To validate our results, a comparison with already published paper in limiting case is also given and results are found in excellent oncurrence; hence reliable results are being presented.     

MHD flow of nanofluids over an exponentially stretching sheet in a porous medium with convective boundary conditions

This article concentrates on the steady magnetohydrodynamic(MHD) flow of viscous nanofluid. The flow is caused by a permeable exponentially stretching surface. An incompressible fluid fills the porous space. A comparative study is made for the nanoparticles namely Copper(Cu), Silver(Ag), Alumina(Al2O3) and Titanium Oxide(TiO2). Water is treated as a base fluid. Convective type boundary conditions are employed in modeling the heat transfer process. The non-linear partial differential equations governing the flow are reduced to an ordinary differential equation by similarity transformations. The obtained equations are then solved for the development of series solutions. Convergence of the obtained series solutions is explicitly discussed. The effects of different parameters on the velocity and temperature profiles are shown and analyzed through graphs.     

Importance of Darcy–Forchheimer porous medium in 3D convective flow of carbon nanotubes

This article explores Darcy–Forchheimer 3D flow of water-based carbon nanomaterial (CNTs). A bi-directional linear stretchable surface has been used to create the flow. Flow in porous space is represented by Darcy–Forchheimer expression. Heat transfer mechanism is explored through convective heating. Results for single-wall (SWCNTs) and multi-wall (MWCNTs) carbon nanotubes have been presented and compared. The reduction of partial differential system into nonlinear ordinary differential system is made through suitable variables. Optimal homotopic scheme is used for solutions development of governing flow problem. Optimal homotopic solution expressions for velocities and temperature are studied through graphs by considering various estimations of physical variables. Skin friction coefficients and local Nusselt number are analyzed through plots. Our findings show that the skin friction coefficients and local Nusselt number are enhanced for larger values of nanoparticles volume fraction.     

Instrument for thermal radiation flux measurement in high temperature gas flow (Cuernavaca instrument)

A new instrument for hemispherical radiation heat flux measurement is proposed. It is based on the theory of blow of the boundary layer, taking into account that at the critical mass flow rate through the porous surface the thermal boundary layer is blown off and only radiation flux high temperature gases reaches the porous surface. With the measurement of blow of gas flow and the temperature of the porous material, the respective heat flux is obtained.     

MHD oscillatory flow on free convection–radiation through a porous medium with constant suction velocity

Unsteady two-dimensional hydromagnetic free convection and thermal radiation flow of an electrically conducting viscous-incompressible fluid, through a highly porous medium bounded by a vertical plane surface of constant temperature are presented. The Rosseland diffusion approximation is used to describe the radiative heat flux in the energy equation. Expressions for the velocity and temperature are obtained. The free-stream velocity of the fluid vibrates about a mean constant value and the surface absorbs the fluid with constant velocity. Effects of varying R (radiative parameter), G (Grashof number), k′ (permeability of the porous medium) and M (magnetic parameter upon the velocity field and the effect of varying R and Pr (Prandtl number) on the temperature are discussed.     

Darcy–Forchheimer 3D flow of carbon nanotubes with homogeneous and heterogeneous reactions

This article deals with Darcy–Forchheimer three dimensional (3D) flow of water-based carbon nanotubes (CNTs) with heterogeneous–homogeneous reactions. A bidirectional nonlinear extendable surface has been employed to create the flow. Flow in porous space is represented by Darcy–Forchheimer expression. Heat transfer mechanism is explored through convective heating. Equal diffusion coefficients are considered for both auto catalyst and reactants. Results for single-wall (SWCNT) and multi-wall (MWCNT) carbon nanotubes have been presented and compared. The diminishment of partial differential framework into nonlinear ordinary differential framework is made through suitable transformations. Optimal homotopy scheme is used for arrangements development of governing flow problem. Optimal homotopic solution expressions for velocities and temperature are studied through plots by considering various estimations of physical variables. Moreover the surface drag coefficients and heat transfer rate are analyzed through plots.     

Heat transfer analysis for stretching flow over a curved surface with magnetic field

The analysis of a viscous fluid flow and heat transfer is carried out under the influence of a constant applied magnetic field over a curved stretching sheet. Heat transfer analysis is carried out for two heating processes, namely, prescribed surface temperature (PST) and prescribed heat flux (PHF). The equations governing the flow are modeled in a curvilinear coordinate system (r, s, z). The nonlinear partial differential equations are then transformed to nonlinear ordinary differential equations by using similarity transformations. The obtained system of equations is solved numerically by a shooting method using Runge-Kutta algorithm. The interest lies in determining the influence of dimensionless radius of curvature on the velocity, temperature, skin friction, and rate of heat transfer at the wall prescribed by the Nusselt number. The effects of Hartmann number are also presented for the fluid properties of interest.     

MHD Double-Diffusive Carreau Fluid Flow through a Porous Medium with Variable Thermal Conductivity and Suction/Injection

In this article, we consider the effects of double diffusion on magnetohydrodynamics (MHD) Carreau fluid flow through a porous medium along a stretching sheet. Variable thermal conductivity and suction/injection parameter effects are also taken into the consideration. Similarity transformations are utilized to transform the equations governing the Carreau fluid flow model to dimensionless non-linear ordinary differential equations. Maple software is utilized for the numerical solution. These solutions are then presented through graphs. The velocity, concentration, temperature profile, skin friction coefficient, and the Nusselt and Sherwood numbers under the impact of different parameters are studied. The fluid flow is analyzed for both suction and injection cases. From the analysis carried out, it is observed that the velocity profile reduces by increasing the porosity parameter while it enhances both the temperature and concentration profile. The temperature field enhances with increasing the variable thermal conductivity and the Nusselt number exhibits opposite behavior.     

Entropy generation (irreversibility) associated with flow and heat transport mechanism in Sisko nanomaterial

Here a novel applications of entropy generation optimization is presented for nonlinear Sisko nanomaterial flow by rotating stretchable disk. Flow is examined in the absence of magnetohydrodynamics and Joule heating. Total irreversibility rate (entropy generation rate) is investigated for different flow parameters. Heat source/sink and viscous dissipation effects are considered. Impacts of Brownian motion and thermophoresis on irreversibility have been analyzed. Governing flow equations comprise momentum, energy and nanoparticle concentration. Von Karman's similarity variables are implemented for reduction of PDEs into ODEs. Homotopy analysis technique for series solutions is implemented. Attention is given to the irreversibility. The impacts of different flow parameters on velocity, nanoparticle concentration, temperature and irreversibility rate are graphically presented. From obtained results it is examined that irreversibility rate enhances for larger estimation of Brinkman number and diffusion. Furthermore it is also examined that temperature and nanoparticle concentration show contrast behavior through Prandtl number and Brownian motion.     

沉降分布孔隙率多孔介质模型及数值研究

研究沉降分布孔隙率多孔介质流动和传热,根据"O"形圈理论和现场测定确定孔隙率系数,建立坐标方向孔隙率分布函数;考虑流体密度变化,并引入Brinkman-Forchheimer的扩展Darcy模型,能量方程采用界面连续条件,建立沉降分布孔隙率多孔介质流动和传热求解模型.采用差分法对模型进行离散化,应用高斯-赛德尔方法迭代求解.数值分析表明:沉降分布孔隙率条件下多孔介质内流体流动速度在壁面附近较大,中心部位较小,壁面附近孔隙率的增大使得低流速区域减小,较高流速区域增大;当孔隙率小值时,温度按线性减小;当孔隙率大值时,温度在高低温壁面附近迅速减小,在中部减小较缓,热量按导热和对流共同传递;孔隙率增大能使平均怒谢尔数增大,对流换热作用增强.     

NATURAL CONVECTION IN ROTATING DRUMS WITH INNER SURFACE HEATING

Two flow visualisation techniques, microencapsulated liquid crystal and tracer methods, are employed to observe the thermal and fluid flow fields, respectively, in a liquid that is enclosed in a rotating drum with inner surface heating. The flow patterns and temperature distribution thus obtained are correlated to determine the conditions for formation of thermally stratified layers. A method is developed to construct a three-dimensional structure of a hot plume ascending from the heating surface by synthesizing three flow structures on three mutually perpendicular cross sections (x-y, y-z, and z-x planes) obtained by the flow visualization technique. The method may be extended to obtain the real-time imaging of a three-dimensional hot plume. A combination of the results from the two tests on the heat and fluid flow fields opens a new dimension in the study of natural convection in a rotating system. Additionally, the temperature-time history inside the Eckman boundary layers is monitored to aid in the understanding of transient thermal behavior and rotational effects on the Eckman boundary layers. The conditions for the incipience of thermally stratified layers are disclosed.     

On the flow of thermal defects from the bulk to surfaces

This paper treats flow of defects between bulk and surface sites, as a crystal passes towards equilibrium, for some practical cases. These include the realistic but quite elaborate example in which vacancy flow from the bulk is coupled to surface step edges, acting as sinks, by reaction with adatoms that are believed to dominate transport on metal surfaces. It is shown how surface processes modify the defect flow from the bulk only at short times. Lacking accurate parameters (such as concentrations) for surface defects, a crude modeling of the theoretical results is offered in order to explore likely generic behavior. The model employs a recently described approximate universality of behavior, scaled to the melting temperature, relevant mainly to fcc (1 1 1) surfaces. Under a range of conditions it is the reaction of advacancies with adatoms that provides the important channel for bulk vacancy flow. Adatom flow onto the terraces from surface step edge sinks is the bottleneck to flow above a crossover temperature (depending on step spacing) and equilibrium recombination is the bottleneck below the crossover.     

Dual solutions in boundary layer flow of a moving fluid over a moving permeable surface in presence of prescribed surface temperature and thermal radiation

An analysis of the heat transfer for a boundary layer forced convective flow past a moving permeable flat surface parallel to a moving fluid is presented. Prescribed surface temperature at the boundary is considered. A thermal radiation term in the energy equation is considered. The similarity solutions for the problem are obtained and the reduced ordinary differential equations are solved numerically. To support the validity of the numerical results, a comparison is made with the available results for some particular cases of this study. Dual solutions exist when the surface and the fluid move in the opposite directions.     

Entropy generation in radiative motion of tangent hyperbolic nanofluid in presence of activation energy and nonlinear mixed convection

In this communication, an optimization of entropy generation is performed through thermodynamics second law. Tangent hyperbolic nanomaterial model is used which describes the important slip mechanism namely Brownian and thermophoresis diffusions. MHD fluid is considered. The novel binary chemical reaction model is implemented to characterize the impact of activation energy. Nonlinear mixed convection, dissipation and Joule heating are considered. Appropriate similarity transformations are implemented to get the required coupled ODEs system. The obtained system is tackled for series solutions by homotopy method. Graphs are constructed to analyze the impact of different flow parameters on entropy number, nanoparticle volume concentration, temperature and velocity fields. Total entropy generation rate is calculated via various flow variables. It is noticed from obtained results that entropy number depend up thermal irreversibility, viscous dissipation and Joule heating irreversibility and concentration irreversibility. Decreasing behavior of concentration is witnessed for higher estimations of chemical reaction variable. Entropy number is more for higher Hartmann number, Weissenberg number and chemical reaction variable while contrast behavior is noted for Bejan number.     

Boundary Layer Flow over a Curved Surface Imbedded in Porous Medium

This research is made to visualize the boundary layer flow by a curved stretching sheet embedded in porous medium. The geometry is bended(curved), therefore the curvilinear coordinates are used to model the present problem.Fluid is electrically conducting with the presence of uniform magnetic field. The governing non-linear partial differential equation reduces to non-linear ordinary differential equations by using the dimensionless suitable transformations. The numerical solutions are obtained by using the method bvp4c from MATLAB. The effects of curvature parameter, nondimensional magnetic parameter, and porosity parameter on the velocity field and skin friction coefficient are examined.The skin friction profile enhances with enhancing the values of porosity and magnetic parameter. Comparison of the present results with the existing results in the literature for the flat surface is also given.     

Mixed Convective Viscoelastic Nanofluid Flow Past a Porous Media with Soret-Dufour Effects

The present study is carried out to see the thermal-diffusion (Dufour) and diffusion-thermo (Soret) effects on the mixed convection boundary layer flow of viscoelastic nanofluid flow over a vertical stretching surface in a porous medium. Optimal homotopy analysis method (OHAM) is best candidate to handle highly nonlinear system of differ-ential equations obtained from boundary layer partial differential equations via appropriate transformations. Graphical illustrations depicting different physical arising parameters against velocity, temperature and concentration distributions with required discussion have also been added. Numerically calculated values of skin friction coefficient, local Nusselt and Sherwood numbers are given in the form of table and well argued. It is found that nanofluid velocity increases with increase in mixed convective and viscoelastic parameters but it decreases with the increasing values of porosity parameter. Also, it is observed that Dufour number has opposite behavior on temperature and concentration profiles.     

曲面固壁附近空化泡溃灭动力学的 流体体积数值研究*

流体体积法(VOF)可以便捷、高效地实现对多相流界面的捕捉和追踪。本文基于VOF方法,对单个空化泡在曲面固壁附近的运动进行了数值模拟,从实验对比、压力场、速度场、温度场演化、溃灭时间、射流速度、固壁温度等方面分析了空化泡溃灭过程的热动力学影响。结果表明,数值模拟得到的空化泡形态演化与实验观测到的现象一致,随着位置参数、泡内外压差及曲面固壁尺寸的改变,空化泡热动力学行为也将发生变化,受到流体运动及射流冲击的影响,溃灭瞬间产生的高温高压使得曲面固壁温度升高。本文研究的曲面固壁附近空化泡溃灭效应,揭示了空化泡与曲面固壁间的相互作用规律,对学术研究及工程应用都具有重要意义。     

植被红外特征的多孔介质模拟

利用流动介质在多孔材料孔隙通道内的渗流和表面蒸发与植物叶片的蒸腾作用相似的原理,设计一种多孔仿真叶片,建立多孔仿真叶片及实际叶片的理论模型,研究孔隙率、仿真叶片厚度、多孔材料固体颗粒的有效直径对仿真叶片表面温度的影响,并比较处于同样环境条件下的植物叶片与仿真叶片表面温度的变化情况,发现厚度0.5 cm,孔隙率0.05,颗粒有效直径2.5 mm的仿真叶片与植物叶片表面温度最接近,全天温差在3℃以内.