Photoactuation from a carbon nanotube-nafion bilayer composite

A bilayer composite of single walled carbon nanotubes (SWNTs) deposited onto Nafion exhibits substantial mechanical motion upon exposure to visible or near-infrared light. The magnitude of the actuation parallels the absorption spectrum of the SWNTs in the near-infrared, but the actuation diminishes in the visible and disappears in the UV portions of the spectrum. In the near-infrared region, the photoactuation is linear with respect to the light intensity. The photoactuation also appears to be associated with a photocurrent across the nanotube/Nafion interface. The proposed mechanism for the actuation is that band bending of the semiconducting SWNTs induces polarization of mobile hydrogen ions at the Nafion interface, which then causes swelling of the polymer.     

Density functional calculations of the 13C NMR chemical shifts in (9,0) single-walled carbon nanotubes

The electronic structure and (13)C NMR chemical shift of (9,0) single-walled carbon nanotubes (SWNTs) are investigated theoretically. Shielding tensor components are also reported. Density functional calculations were carried out for C(30)-capped and H-capped fragments which serve as model systems for the infinite (9,0) SWNT. Based on the vanishing HOMO-LUMO gap, H-capped nanotube fragments are predicted to exhibit "metallic" behavior. The (13)C chemical shift approaches a value of approximately 133 ppm for the longest fragment studied here. The C(30)-capped SWNT fragments of D(3d)/D(3h) symmetry, on the other hand, are predicted to be small-gap semiconductors just like the infinite (9,0) SWNT. The differences in successive HOMO-LUMO gaps and HOMO and LUMO energies, as well as the (13)C NMR chemical shifts, converge slightly faster with the fragment's length than for the H-capped tubes. The difference between the H-capped and C(30)-capped fragments is analyzed in some detail. The results indicate that (at least at lengths currently accessible to quantum chemical computations) the H-capped systems represent less suitable models for the (9,0) SWNT because of pronounced artifacts due to their finite length. From our calculations for the C(30)-capped fragments, the chemical shift of a carbon atom in the (9,0) SWNT is predicted to be about 130 ppm. This value is in reasonably good agreement with experimental estimates for the (13)C chemical shift in SWNTs.     

Aqueous dispersion, surface thiolation, and direct self-assembly of carbon nanotubes on gold

We report the efficient aqueous dispersion of pristine HiPco single-walled carbon nanotubes (SWNTs) with ionic liquid (IL)-based surfactants 1-dodecyl-3-methylimidazolium bromide (1) and 1-(12-mercaptododecyl)-3-methylimidazolium bromide (2), the thiolation of nanotube sidewalls with 2, and the controlled self-assembly of positively charged SWNT-1,2 composites on gold. Optical absorption spectra and resonance Raman (RR) data of obtained aqueous SWNT-1,2 dispersions are consistent with debundled and noncovalently functionalized nanotubes whose electronic properties have not been disturbed. Additionally, the dispersion of pristine nanotube material with surfactants 1 and 2 leads to a high degree of purification from carbonaceous particles. The chiralities of the 14 smallest semiconducting HiPco SWNTs in resonance with Raman excitation at 1064 nm (1.165 eV) were determined in SWNT-2 aqueous dispersion using UV-vis-NIR and RR spectra. X-ray photoelectron spectroscopy (XPS) and surface-enhanced resonance Raman scattering (SERRS) spectroscopy of SWNT-2 submonolayers on gold verified the encapsulation of individualized SWNTs with IL surfactants, the cleavage of S-S disulfide bonds formed in aqueous SWNT-2 suspensions, and the direct chemisorption of the SWNT-2 composite on bare gold via the Au-S bond. Aqueous dispersions of SWNTs with IL-based surfactants add biofunctionality to carbon nanotubes by imparting the positive surface charge necessary for interactions with cell membranes. Our technique, which purifies pristine nanotube material and produces water-soluble, positively charged nanotubes with pendent surface-active thiol groups, may also be translated to other carbon nanotubes and carbon nanostructures. Self-assembled, positively charged submonolayers of SWNTs can be further used for applications in cell biology and sensor technology.     

Theoretical study of the 13C NMR spectroscopy of single-walled carbon nanotubes

The 13C NMR spectroscopy of armchair and zigzag single-walled carbon nanotubes has been investigated theoretically. Spectra for (4,4), (5,5), (6,6), (6,0), (9,0), and (10,0) nanotubes have been simulated based on ab initio calculations of model systems. The calculations predict a dominant band arising from the carbon atoms in the "tube" with smaller peaks at higher chemical shifts arising from the carbon atoms of the caps. The dominant band lies in the range of 128 and 138 ppm. Its position depends weakly on the length, width, and chirality of the tubes. The calculations demonstrate how structural information may be gleaned from relatively low-resolution nanotube 13C NMR spectra.     

Single-step in situ synthesis of polymer-grafted single-wall nanotube composites

An in situ composite synthesis technique has been developed by grafting polystyrene chains onto single-wall carbon nanotubes (SWNTs) via a single-step debundling/polymerization scheme. The method, based on established anionic polymerization techniques, eliminates the need for nanotube pretreatment prior to functionalization and allows attachment of polymer molecules to pristine tubes without altering their original structure. The composites obtained contain well-dispersed SWNTs with good nanotube-matrix interaction. The scheme is quite general in nature and can be applied to different polymer systems. The simplicity and scalability of the process can lead to the realization of superior nanotube-based polymer composites for applications as advanced multifunctional structural materials.     

NMR detection of single-walled carbon nanotubes in solution

The detection of nanotube carbons in solution by (13)C NMR is reported. The highly soluble sample was from the functionalization of (13)C-enriched single-walled carbon nanotubes (SWNTs) with diamine-terminated oligomeric poly(ethylene glycol) (PEG(1500N)). The ferromagnetic impurities due to the residual metal catalysts were removed from the sample via repeated magnetic separation. The nanotube carbon signals are broad but partially resolved into two overlapping peaks, which are tentatively assigned to nanotube carbons on semiconducting (upfield) and metallic (downfield) SWNTs. The solid-state NMR signals of the same sample are similarly resolved. Mechanistic and practical implications of the results are discussed.     

Asymmetric (13)C-(13)C polarization transfer under dipolar-assisted rotational resonance in magic-angle spinning NMR

A two-dimensional (2D) homonuclear exchange NMR spectrum in solids often shows an asymmetric cross-peak pattern, which disturbs a quantitative analysis of peak intensities. When magnetization is prepared using cross polarization (CP), the asymmetry can naively be ascribed to nonequilibrium initial magnetization. We show, however, that the CP effect cannot fully explain the observed mixing-time dependence of the peak intensities in 2D (13)C-(13)C exchange spectra of [2,3-(13)C] l-alanine (2,3-Ala) under (13)C-(1)H dipolar-assisted rotational resonance (DARR) recoupling, which has recently been proposed for a broadband recoupling method under magic-angle spinning. We develop a theory to describe polarization transfer in a two-spin system under DARR recoupling. By taking into account the effects of the partial spectral overlap among (13)C signals, which is a unique feature of DARR recoupling, and (1)H-(1)H flip-flop exchange, we can successfully explain the observed mixing-time dependence of the peak intensities of 2D (13)C-(13)C DARR exchange spectra of 2,3-Ala. A simple initial-rate analysis is also examined.     

Density functional study of the 13C NMR chemical shifts in small-to-medium-diameter infinite single-walled carbon nanotubes

NMR chemical shifts were calculated for semiconducting (n,0) single-walled carbon nanotubes (SWNTs) with n ranging from 7 to 17. Infinite isolated SWNTs were calculated using a gauge-including projector-augmented plane-wave (GIPAW) approach with periodic boundary conditions and density functional theory (DFT). In order to minimize intertube interactions in the GIPAW computations, an intertube distance of 8 A was chosen. For the infinite tubes, we found a chemical shift range of over 20 ppm for the systems considered here. The SWNT family with lambda = mod(n, 3) = 0 has much smaller chemical shifts compared to the other two families with lambda = 1 and lambda = 2. For all three families, the chemical shifts decrease roughly inversely proportional to the tube's diameter. The results were compared to calculations of finite capped SWNT fragments using a gauge-including atomic orbital (GIAO) basis. Direct comparison of the two types of calculations could be made if benzene was used as the internal (computational) reference. The NMR chemical shifts of finite SWNTs were found to converge very slowly, if at all, to the infinite limit, indicating that capping has a strong effect (at least for the (9,0) tubes) on the calculated properties. Our results suggest that (13)C NMR has the potential for becoming a useful tool in characterizing SWNT samples.     

Nicotinamide Adenine Dinucleotide Oxidation Studies at Multiwalled Carbon Nanotube/Polymer Composite Modified Glassy Carbon Electrodes

NADH oxidation has previously been investigated at carbon nanotube surfaces, although studies into the effect of the polymer binders are needed to fully understand whether the polymer binder affects the electrochemistry. This work details NADH oxidation at glassy carbon electrodes modified with composites containing multiwalled carbon nanotubes and selected polymer binders. NADH is shown to be oxidized at a lower potential than at glassy carbon electrodes and the oxidation potential is a function of the polymer binder. Hydrophobically modified Nafion, Nafion, linear poly(ethylenimine) (LPEI), octyl‐modified LPEI, and poly(vinylpyridine) binders were studied. Experiments showed the peak current and electrochemically assessible electrode area are dependent on the polymer binder. Overall, this paper shows that polymer binders affect NADH oxidation potential at carbon nanotube modified electrodes.     

Unraveling the 13C NMR chemical shifts in single-walled carbon nanotubes: dependence on diameter and electronic structure

The atomic specificity afforded by nuclear magnetic resonance (NMR) spectroscopy could enable detailed mechanistic information about single-walled carbon nanotube (SWCNT) functionalization as well as the noncovalent molecular interactions that dictate ground-state charge transfer and separation by electronic structure and diameter. However, to date, the polydispersity present in as-synthesized SWCNT populations has obscured the dependence of the SWCNT (13)C chemical shift on intrinsic parameters such as diameter and electronic structure, meaning that no information is gleaned for specific SWCNTs with unique chiral indices. In this article, we utilize a combination of (13)C labeling and density gradient ultracentrifugation (DGU) to produce an array of (13)C-labeled SWCNT populations with varying diameter, electronic structure, and chiral angle. We find that the SWCNT isotropic (13)C chemical shift decreases systematically with increasing diameter for semiconducting SWCNTs, in agreement with recent theoretical predictions that have heretofore gone unaddressed. Furthermore, we find that the (13)C chemical shifts for small diameter metallic and semiconducting SWCNTs differ significantly, and that the full-width of the isotropic peak for metallic SWCNTs is much larger than that of semiconducting nanotubes, irrespective of diameter.     

Solid‐state cross‐polarization magic angle spinning 13C and 15N NMR characterization of Sepia melanin,Sepia melanin free acid and Human hair melanin in comparison with several model compounds

This paper presents the high‐resolution ¹³C and ¹⁵N cross‐polarization magic angle spinning (CP/MAS) NMR spectra of three natural melanin solids: Sepia officinalis melanin, Sepia officinalis melanin free acid (MFA) and Human hair melanin. The functional group characterization of Human hair melanin by NMR is the first to date and the ¹³C CP/MAS NMR spectra reported here show improved resolution of chemically inequivalent sites. The observed spectral regions of the solid melanin samples can be assigned to the postulated structural unit of the polymer chain of Sepia MFA derived from solution‐state NMR studies. To assist in the assignment of functional groups in the spectra, the solid‐state CP/MAS NMR spectra are compared with high‐resolution ¹³C and ¹⁵N CP/MAS spectra of four model compounds, L ‐dopa, dopamine, 2‐methoxycarbonyl‐3‐ethoxycarbonyl‐4‐methylpyrrole and ethyl 5,6‐dimethoxyindole‐2‐carboxylate. To aid further in the assignment of protonated and non‐protonated carbon atoms, CP contact time dependence and non‐quaternary carbon suppression (NQS) experiments were performed on the melanin samples. The ¹⁵N CP/MAS spectra of the melanin samples confirm the presence of indole and pyrrole units in the melanin polymer chain. The NMR peaks observed in all of the melanin samples are relatively broad, presumably owing to the presence of free radicals. Electron spin resonance (ESR) data shows that all three melanin samples contain localized free radicals (g = 2.007), with the Sepia melanin containing a 10‐fold higher free radical density than Human hair melanin. Copyright © 2003 John Wiley & Sons, Ltd.     

Cover Picture

The cover picture shows a single-walled carbon nanotube (SWNT) functionalized with nucleophilic carbenes at the sidewall. Normally, single-walled nanotubes exist in the form of insoluble bundles. The sidewall addition of reactive organic groups such as radicals, nitrenes, or carbenes such as the ones shown in the cover picture disrupts the bundles. The background of the picture shows a typical AFM image of such derivatized SWNTs. The isolated SWNTs are soluble in organic solvents giving black solutions. This enables a spectroscopic characterization of nanotubes in solution. With this versatile sidewall functionalization the decisive requirements for the development of technological applications such as the production of ultrathin films or the processing to polymer composites with new electronic and mechanic properties have been compiled. Details about this new chemical funtionalization of SWNTs is described by Hirsch et al. on pp. 4002 ff.     

Low-temperature growth of single-walled carbon nanotubes by water plasma chemical vapor deposition

Preferential growth of pure single-walled carbon nanotubes (SWNTs) over multi-walled carbon nanotubes (MWNTs) was demonstrated at low temperature by water plasma chemical vapor deposition. Water plasma lowered the growth temperature down to 450 degrees C, and the grown nanotubes were single-walled without carbonaceous impurities and MWNTs. The preferential growth of pure SWNTs over MWNTs was proven with micro-Raman spectroscopy, high-resolution transmission electron microscopy, and electrical characterization of the grown nanotube networks.     

A density functional study of the 13C NMR chemical shifts in functionalized single-walled carbon nanotubes

The 13C NMR chemical shifts for functionalized (7,0), (8,0), (9,0), and (10,0) single-walled carbon nanotubes (SWNTs) have been studied computationally using gauge-including projector-augmented plane-wave (GIPAW) density functional theory (DFT). The functional groups NH, NCH3, NCH2OH, and CH2NHCH2 have been considered, and different sites where covalent addition or substitution may occur have been examined. The shifts of the carbons directly attached to the group are sensitive to the bond which has been functionalized and may, therefore, be used to identify whether the group has reacted with a parallel or a diagonal C-C bond. The addition of NH to a parallel bond renders the functionalized carbons formally sp3-hybridized, yielding shifts of around 44 ppm, independent of the SWNT radius. Reaction with a diagonal bond retains the formal sp2 hybridization of the substituted carbons, and their shifts are slightly lower or higher than those of the unsubstituted carbon atoms. The calculated 1H NMR shifts of protons in the functional groups are also dependent upon the SWNT-group interaction. Upon decreasing the degree of functionalization for the systems where the group is added to a parallel bond, the average chemical shift of the unfunctionalized carbons approaches that of the pristine tube. At the same time, the shifts of the functionalized carbons remain independent upon the degree of functionalization. For the SWNTs where N-R attaches to a parallel bond, the average shift of the sp2 carbons was found to be insensitive to the substituent R. Moreover, the shifts of the functionalized sp3 carbons, as well as of the carbons within the group itself, are independent of the SWNT radius. The results indicate that a wealth of knowledge may be obtained from the 13C NMR of functionalized SWNTs.     

EPR and solid-state NMR studies of poly(dicarbon monofluoride) (C2F)n

Poly(dicarbon monofluoride) (C2F)n was studied by electron paramagnetic resonance (EPR) and solid-state nuclear magnetic resonance (NMR). The effects of physisorbed oxygen on the EPR and NMR relaxation were underlined and extrapolated to poly(carbon monofluoride) (CF)n and semi-covalent graphite fluoride prepared at room temperature. Physisorbed oxygen molecules are shown to be an important mechanism of both electronic and nuclear relaxations, resulting in apparent spin-lattice relaxation time and line width during NMR and EPR measurements, respectively. The effect of paramagnetic centers on the 19F spin-lattice relaxation was underlined in accordance with the high electron spin density determined by EPR. 19F magic angle spinning (MAS) NMR, 13C MAS NMR, and 13C MAS NMR with 19F to 13C cross polarization (CP) underline the presence of two types of carbon atoms, both sp3 hybridized: some covalently bonded to fluorine and the others linked exclusively to carbon atoms. Finally, a C-F bond length of 0.138 +/- 0.002 nm has been determined thanks to the re-introduction of dipolar coupling using cross polarization.     

1H-Detected 13C photo-CIDNP as a sensitivity enhancement tool in solution NMR

NMR is a powerful yet intrinsically insensitive technique. The applicability of NMR to chemical and biological systems would be substantially extended by new approaches going beyond current signal-to-noise capabilities. Here, we exploit the large enhancements arising from (13)C photochemically induced dynamic nuclear polarization ((13)C photo-CIDNP) in solution to improve biomolecular NMR sensitivity in the context of heteronuclear correlation spectroscopy. The (13)C-PRINT pulse sequence presented here involves an initial (13)C nuclear spin polarization via photo-CIDNP followed by conversion to anti-phase coherence and transfer to (1)H for detection. We observe substantial enhancements, up to ?200-fold, relative to the dark (laser off) experiment. Resonances of both side-chain and backbone CH pairs are enhanced for the three aromatic residues Trp, His, and Tyr, the σ(32) peptide, and the drkN SH3 protein. The sensitivity of this experiment, defined as signal-to-noise per square root of unit time (S/N)(t), is unprecedented in the NMR polarization enhancement literature dealing with polypeptides in solution. Up to a 16-fold larger (S/N)(t) than for the (1)H-(13)C SE-HSQC reference sequence is achieved, for the σ(32) peptide. Data collection time is reduced up to 256-fold, highlighting the advantages of (1)H-detected (13)C photo-CIDNP in solution NMR.     

Immobilizing shortened single-walled carbon nanotubes (SWNTs) on gold using a surface condensation method

We propose a surface condensation method for assembling single-walled carbon nanotubes (SWNTs) on gold. The as-prepared long and randomly tangled SWNTs were cut into short pipes by chemical oxidation, allowing the nanotubes to be terminated by carboxyl functionalities. A surface condensation reaction was then performed by immersing an amino self-assembled monolayer (SAM)-modified gold substrate into the dimethylformamide suspension of carboxylic nanotubes with the aid of dicyclohexylcarbodiimide condensation agent. Raman spectroscopy and atomic force microscopy (AFM) results show that a highly aligned assembly of SWNTs has been formed on gold, with the nanotubes standing on the surface stable enough for a long ultrasonication. In combination with the microcontact printing (muCP) technique, we have fabricated patterned nanotube assemblies using this surface condensation method. Moreover, we found that the "giant" carbon nanotubes tend to form bundles on an amino-terminating surface, likely following a nucleation-growth model.     

NMR observations of 13C-enriched coenzyme B12 bound to the ribonucleotide reductase from Lactobacillus leichmannii

The 13C NMR resonance and one-bond 1H-13C coupling constants of coenzyme B12 enriched in 13C in the cobalt-bound carbon have been observed in the complex of the coenzyme with the B12-dependent ribonucleotide reductase from Lactobacillus leichmannii. Neither the 13C NMR chemical shift nor the 1H-13C coupling constants are significantly altered by binding of the coenzyme to the enzyme. The results suggest that ground-state Co-C bond distortion is not utilized by this enzyme to activate coenzyme B12 for C-Co bond homolysis.     

Line shapes in CP/MAS (13)C NMR spectra of cellulose I

The CP/MAS (13)C NMR line shape of cellulose I has been qualitatively analyzed by direct simulations using the Ornstein-Uhlenbeck stochastic process and the Kubo model. Both approaches describe a anhydroglucose C4 carbon as a oscillator with fluctuating Larmor frequency. The NMR resonance frequency is written omega=omega +omega(t), where the fluctuating part with zero mean was modelled as a stationary Markov diffusion process. The simulation results both motivates the use of multiple line shapes when fitting CP/MAS (13)C NMR spectra recorded on cellulose I and gives some insights into why signals from crystalline cellulose I give rise to Lorentzian line shapes.     

Carbanion substituent effects on 1-disubstituted 4-(4'-pyridyl)pyridinium methylide structures using 13C NMR spectroscopy and DFT method

The structure of 1-disubstituted 4-(4'-pyridyl)pyridinium methylides or 4,4'-bipyridinium monoylides (2-5) with a wide range of carbanion substituents, were determined using 13C NMR signals in dimethylsufoxide (DMSO-d(6)) solution. For the first time, we developed a systematic determination of 13C NMR chemical shifts of the ylidic carbon using a long-range correlated (1H-(13)C) HMBC experiments. The chemical shift values are discussed in terms of magnetic and/or electronic effects of the ylidic carbon substituents. From the extracted NMR parameters and the results of accompanying quantum chemical DFT calculations for a three-dimensional (3D)-structure representation, we found a long distance electronic effect where the aromatic heterocycle C2z.sbnd;C6 and C4 centers are perturbed according to the electron acceptor strengths of ylidic carbon substituents in all monoylides (2-5c) capable to stabilize in a planar conformation. No significant perturbation on C2z.sbnd;C6 and C4 centers are found in all other monoylides (2-5a, b) that adopted a non-planar conformation. Good similar linear dependences of the chemical shift variation Delta (calculated by the differences of analogous C2z.sbnd;C6 and C4 chemical shifts in non-planar and planar monoylides) with the ylidic carbon chemical shifts modulated by the strength of electron acceptor substituents pointed out the resonance interaction or the delocalization phenomena of the ylidic carbon charge on the heterocycle.