Surface-Modified Superparamagnetic Iron-Oxide Nanoparticles

The generation of superparamagnetic iron-oxide nanoparticles bearing fluorescent ligands is described. γ-Fe₂O₃ nanoparticles (radius ∼4 and 8 nm) bearing octylamine or oleic acid as ligands were prepared by hydrothermal synthesis starting from Fe-cupferron and iron pentacarbonyl, respectively. Ligand exchange proceeds with 1,2-diols bearing ω-azido or ω-bromo ligands at elevated temperatures. Subsequent nucleophilic substitution reaction, followed by 1,3-dipolar cycloaddition reactions with 2,4,6-trinitro-1-O-propargyl-benzene yields superparamagnetic iron-oxide nanoparticles with a fluoresecent ligand on their surface.     

Preparation of iron oxides using ammonium iron citrate precursor: Thin films and nanoparticles

Ammonium iron citrate (C₆H₈O₇·nFe·nH₃N) was used as a precursor for preparing both iron-oxide thin films and nanoparticles. Thin films of iron oxides were fabricated on silicon (111) substrate using a successive-ionic-layer-adsorption-and-reaction (SILAR) method and subsequent hydrothermal or furnace annealing. Atomic force microscopy (AFM) images of the iron-oxide films obtained under various annealing conditions show the changes of the micro-scale surface structures and the magnetic properties. Homogenous Fe₃O₄ nanoparticles around 4 nm in diameter were synthesized by hydrothermal reduction method at low temperature and investigated using transmission electron microscopy (TEM).     

Fe3O4/PEI/Au@CdSe/CdS多功能复合材料的制备与表征

以共沉淀法制备出Fe₃O₄纳米粒子,通过聚乙烯亚胺(PEI)修饰Fe₃O₄纳米粒子,再原位复合上Au纳米粒子,制得Fe₃O₄/PEI/Au纳米颗粒微球。再将Fe₃O₄/PEI/Au纳米颗粒与巯基乙酸修饰的量子点CdSe/CdS连接,成功制备了Fe₃O₄/PEI/Au@CdSe/CdS多功能复合微球。经过傅里叶变换红外光谱仪(FTIR)、荧光分光光度计、荧光显微镜、X射线衍射(XRD)、透射电子显微镜(TEM)及振动样品磁强计(VSM)的表征。结果表明:多功能复合微球的粒径在40 nm左右,具有超顺磁性,剩磁,矫顽力近似等于零,饱和磁化强度为28.83 A·m²·kg^-1,同时兼有优越的荧光性能和金纳米粒子的特性。     

A new oxidation process. Transformation of gem-bishydroperoxides into esters

A new oxidation process has been found where α,ω-dicarboxylic acid esters and ω-hydroxycarboxylic acid esters are formed on heating gem-bishydroperoxides in alcohol in the presence of BF₃·Et₂O. By addition of H₂O₂ to this reaction α,ω-dicarboxylic acid esters are formed almost selectively.     

Effect of formation conditions on the structure, morphology and magnetic properties of nanosized MIIFe 2III O4 ferrites (M = Mn, Co, Ni) and Fe2O3

A study was carried out on the conditions of formation of highly crystalline, superparamagnetic, nanosized oxides, M^II Fe ₂ ^III O₄ and γ-Fe₂O₃ (4.9–11.7 nm) by the thermal decomposition of complexes [MFe₂O(CH₃CO₂)₆(H₂O)₃] (M = Mn, Fe, Co, Ni) in tetraethylene glycol. The presence of surfactants leads to a decrease in the size and size distribution of the nanoparticles formed, while the use of microwave radiation significantly reduces the time for formation of the nanocrystalline oxides. The magnetic measurements showed ferrimagnetic ordering in the nanoparticles studied and their superparamagnetic behavior. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 5, pp. 323–329, September–October, 2007.     

Theoretical study of dynamical properties on reaction path in molecular internal coordinates

The dynamical properties on reaction path (IRC) in internal coordinates have been obtained, which in. clude ω_K (frequencies orthogonal to IRC), L_K (vibrational modes), B_(KF) (coupling constants between the IRC and vibra tions orthogonal to it), B_(KL) (coupling constants between every two vibrations orthogonal to IRC). A set of theory of teac. tion path in molecular internal coordinates has been also constructed. The dynamical properties, including ω_K, B_(KF) B_(KL) of the reaction H~1O~2H~3 H~4→H~1O~2 H~3H~4 have been calculated, which explicitly explain the interaction, chang ing trend and contribution of each chemical bond (including bond angle) in the reaction.     

Synthesis and oxidation of sulfides containing an isocyanurate fragment

The reaction of 1-(ω-haloalkyl)-3,5-dimethylisocyanurates with sodium salt of methyl thioglycolate afforded the corresponding 1-[ω-(methoxycarbonylmethylthio)alkyl]-3,5-dimethylisocyanurates, the oxidation of which with the system 34% aqueous H₂O₂-0.2 M NaHCO₃-Mn^II leads to the corresponding sulfones. The oxidation of these compounds with 34% aq. H₂O₂ in Ac₂O gives alternative products, viz., sulfones, sulfoxides, or α-acyloxy sulfides, depending on the temperature and number of methylene groups between the isocyanurate fragment and the sulfur atom.     

Preparation and characterization of multiresponsive polymer composite microspheres with core–shell structure

Fe₃O₄/SiO₂/poly (N-isopropylacrylamide-co-N,N-dimethylaminoethyl methacrylate) [P(NIPAM-co-DMA)] multiresponsive composite microspheres with core–shell structure were synthesized by template precipitation polymerization. First, the magnetite nanoparticles were coated with silica and then modified with 3-(trimethoxysilyl)-propyl methacrylate (MPS). Subsequently, the Fe₃O₄/SiO₂ particles grafted with MPS were used to seed the precipitation copolymerization of NIPAM and DMA. The composite microspheres with core–shell structure were superparamagnetic, pH-sensitive, and thermoresponsive. The swelling ratio (D_{25 °C, pH = 3}/D_{50 °C, pH = 9})³ coupling of pH and temperature increased up to 21.2, which was much higher than that without comonomer DMA.     

Effects of various chemical synthetic routes on structural and magnetic features of Mn–Pt bimetallic nanoparticles

Mn–Pt nanoparticles were synthesized by ‘wet-chemical’ methods, in various organic solvents and with several combinations between organometallic precursors and capping ligands. The results show that the size of the obtained nanoparticles can be tuned between 2 and 9 nm, through adjustment of the synthetic conditions, including the nature and concentration of the starting reagents and the choice of reaction temperatures. Some of the as-prepared samples present exchange bias features probably due to the simultaneous occurrence of antiferromagnetic MnO and ferrimagnetic Mn₃O₄ oxides. Magnetic characterization of annealed alloy nanoparticles indicates the co-existence of both superparamagnetic and interacting nanoparticles as well as the presence of two different hard and soft magnetic phases, displaying high coercivity values at 10 K.     

Fe3O4/PEI/Au@CdSe/CdS多功能复合材料的制备与表征

以共沉淀法制备出Fe₃O₄纳米粒子,通过聚乙烯亚胺(PEI)修饰Fe₃O₄纳米粒子,再原位复合上Au纳米粒子,制得Fe₃O₄/PEI/Au纳米颗粒微球。再将Fe₃O₄/PEI/Au纳米颗粒与巯基乙酸修饰的量子点CdSe/CdS连接,成功制备了Fe₃O₄/PEI/Au@CdSe/CdS多功能复合微球。经过傅里叶变换红外光谱仪(FTIR)、荧光分光光度计、荧光显微镜、X射线衍射(XRD)、透射电子显微镜(TEM)及振动样品磁强计(VSM)的表征。结果表明:多功能复合微球的粒径在40nm左右,具有超顺磁性,剩磁,矫顽力近似等于零,饱和磁化强度为28.83A·m₂·kg^-1,同时兼有优越的荧光性能和金纳米粒子的特性。     

Characterization of superparamagnetic Mg x Zn1−x Fe2O4 powders

Structural and magnetic properties of Mg _x Zn_1−x Fe₂O₄ powders have been studied with respect to the application for thermal cancer therapy (magnetic hyperthermia). Mg _x Zn_1−x Fe₂O₄ (x=0.1–0.5) powders with particle sizes between 5 and 8 nm were produced by citrate method. The X-ray diffraction patterns of the samples correspond to a spinel phase. The lattice constant and the volume of the elementary cell increase when x changes from 0.1 to 0.5. The FTIR-spectra ascertain the spinel phase formation. The Mossbauer studies reveal the presence of extremely small particles, which undergo superparamagnetic relaxation at room temperature. The core-shell model has been applied to explain quadruple doublets. The quadruple splitting at “shells” is bigger than those at “cores” whereas the isomer shifts remain close. Magnetic studies confirm the presence of extremely small particles that behave as superparamagnetic ones.      

Novel fabrication of magnetic thermoplastic nanofibers via melt extrusion of immiscible blends

A novel technique of fabricating magnetic thermoplastic nanofibers by the control of the phase separation of immiscible polymer blends during melt extrusion was presented. The magnetic poly(vinyl alcohol‐co‐ethylene) (PVA‐co‐PE)/Fe₃O₄ composite nanofibers were prepared via the melt extrusion of cellulose acetate butyrate matrix and PVA‐co‐PE preloaded with different amounts of Fe₃O₄ nanoparticles. The morphologies of magnetic composite nanofibers were characterized by scanning electron microscopy. The uniform dispersion of Fe₃O₄ nanoparticles in nanofiber matrixes and crystal structures were confirmed using transmission electron microscopy and wide angle X‐ray diffraction. Thermogravimetric analysis was employed to quantify the exact loading amount of Fe₃O₄ nanoparticles in the composite nanofibers. The magnetic measurements showed that composite nanofibers displayed superparamagnetic behavior at room temperature. With increasing content of Fe₃O₄ nanoparticles, the saturation magnetization of the magnetic composite nanofiber significantly improved. The prepared magnetic composite nanofibers might have found potential applications in the sensors and bio‐molecular separation fields. Copyright © 2012 John Wiley & Sons, Ltd.     

Electrochemical synthesis of Fe3O4-PB nanoparticles with core-shell structure and its electrocatalytic reduction toward H2O2

The Fe₃O₄-Prussian blue (PB) nanoparticles with core-shell structure have been in situ prepared directly on a nano-Fe₃O₄-modified glassy carbon electrode by cyclic voltammetry (CV). First, the magnetic nano-Fe₃O₄ particles were synthesized and characterized by X-ray diffraction. Then, the properties of the Fe₃O₄-PB nanoparticles were characterized by CV, electrochemical impedance spectroscopy, and superconducting quantum interference device. The resulting core-shell Fe₃O₄-PB-modified electrode displays a dramatic electrocatalytic ability toward H₂O₂ reduction, and the catalytic current was a linear function with the concentration of H₂O₂ in the range of 1 × 10⁻⁷~5 × 10⁻⁴ mol/l. A detection limit of 2 × 10⁻⁸ (s/n = 3) was determined. Moreover, it showed good reproducibility, enhanced long-term stability, and potential applications in fields of magnetite biosensors.     

Poly(PEGMA) magnetic nanogels: preparation via photochemical method,characterization and application as drug carrier

One-pot synthesis of magnetic nanogels with excellent biocompatibility via the photochemical method is reported in this paper. Poly(PEGMA) modified superparamagnetic nanogels (poly(PEGMA) magnetic nanogels) were synthesized by in-situ polymerization using poly(ethylene glycol) methacrylate (PEGMA) as the monomer and N, N′-methylene-bis-(acrylamide) (MBA) as the cross-linking agent in magnetite aqueous suspension under UV irradiation. The surface functional groups and components of magnetic nanogels were analyzed by Fourier transform infrared spectroscopy (FTIR) and a thermogravimetric analyzer (TGA). The results indicated that the poly(PEGMA) magnetic nanogels were synthesized successfully by coating poly(PEGMA) on the Fe₃O₄ nanoparticles under UV irradiation, and the Fe₃O₄ nanoparticles content in this nanogels was above 50 wt%. The morphology, size, zeta-potential and magnetic property were also characterized. The magnetic nanogels had a nearly spherical shape and core-shell structure, the average size in aqueous system measured by photon correlation spectroscopy (PCS) was 68.4 nm, which was much bigger than that in the dry state, the nanogels behaved superparamagnetically with saturated magnetization of 58.6 emu/g, and the zeta-potential was −16.3–−17.3 mV at physiological pH (6.8–7.4) which could help to maintain stability in blood. The preliminary application as drug carrier was made and the doxorubicin-loaded magnetic nanogels had an excellent property in slow-release. The experiment indicated that the magnetic nanogel was an ideal candidate carrier in target drug delivery systems and other biomedical application. Supported by the Natural Science Foundation of Shandong Province (Grant No. Q2006F01), Scientific and Technological Project of Shandong Province (Grant No. 2007GG3WZ02066) and Scientific and Technological Project of Department of Education, Shandong (Grant No. J07WC01)     

Use of Gemini surfactants to stabilize TiO2 P25 colloidal dispersions

Photocatalytically active TiO₂ P25 nanoparticles, widely used for practical applications, were investigated. The nominal size of TiO₂ P25 nanoparticles is 21 nm, but they easily agglomerate in aqueous media, depending on pH and ionic strength. TiO₂ P25 aqueous dispersions were stabilized by alkanediyl-α,ω-bis-N-dodecyl-N, N′-dimethyl-ammonium bromide, cationic Gemini surfactant. The optimal conditions required to obtain stable dispersions, without formation of large agglomerates, were experienced. The stabilization of TiO₂ P25 nanoparticles by cationic Gemini surfactant was investigated in some details. Different amounts of Gemini surfactant were used, at concentrations between 1.0 and 250 × 10⁻⁶ mol L⁻¹, well below the critical micelle concentration. Dynamic light scattering and zeta potential analyses estimated the particle size and the dispersions stability. When the proper amount of Gemini surfactant was used, the resulting nanoparticles were still poly-disperse, but large agglomerates disappeared and were remarkably redispersible.     

<Emphasis Type="Italic">N</Emphasis>-alkylation of amidothiophosphoryl compounds under phase-transfer catalysis conditions. Synthesis and properties of 1,3,2-thiazaphosphacyclanes

N (ω-Haloalkyl)amidothiophosphates, N (ω-Haloalkyl)amidothiophosphonates, and N- (ω-Haloalkyl)amidothiophosphinates (Hal = Cl or Br) were obtained in high yields by alkylation of phosphorus(V) acid thioamides with 6h,ω-dihaloalkanes under phase-transfer catalysis (PTC) conditions or through the use of NaH as a base. Thermal rearrangement of N (3-iodopropyl)-or N (4-iodobutyl)amidothiophosphate and N (3-iodopropyl)-or N (4-iodo-butyl)amidothiophosphonate obtained in situ by the Finkelstein reaction provides a convenient route to 2-oxo-1,3,2-thiazaphosphinanes and 2-oxo-1,3,2-thiazaphosphepanes. Reactions of N (ω-Haloalkyl)amidothiophosphinates with NaClO₄ in MeCN afforded the first example of stable 1,3,2-thiazaphosphacyclanium salts containing P—C bonds.     

Synthesis of new cyclolinear permethyloligosilane-siloxanes

α,ω-Bis(heptamethylcyclotetrasiloxanyloxy)oligodimethylsilanes were synthesized for the first time by heterofunctional condensation of hydroxyheptamethylcyclotetrasiloxane with α,ω-dichloropermethyloligosilanes, Cl(Me₂Si) _n Cl (n=2, 4, or 6). The compounds obtained were characterized by spectroscopic methods. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 544–545, March, 1998.     

Dendrimer‐encapsulated Cu(Π) nanoparticles immobilized on superparamagnetic Fe3O4@SiO2 nanoparticles as a novel recyclable catalyst for N‐arylation of nitrogen heterocycles and green synthesis of 5‐substituted 1H‐tetrazoles

In this study, dendrimer‐encapsulated Cu(Π) nanoparticles immobilized on superparamagnetic Fe₃O₄@SiO₂ nanoparticles were prepared via a multistep‐synthesis. Then, the synthesized composite was fully characterized by various techniques such as fourier transform infrared (FT‐IR) spectroscopy, X‐ray diffraction (XRD), dynamic light scattering (DLS), UV‐vis spectroscopy, energy dispersive X‐ray analysis (EDX), thermogravimetric analysis (TGA) and vibration sample magnetometer (VSM). From the information gained by FE‐SEM and TEM studies it can be inferred that the particles are mostly spherical in shape and have an average size of 50 nm. Also, the amount of Cu is determined to be 0.51 mmol/g in the catalyst by inductively coupled plasma (ICP) analyzer. This magnetic nano‐compound has been successfully applied as a highly efficient, magnetically recoverable and stable catalyst for N‐arylation of nitrogen heterocycles with aryl halides (I, Br) and arylboronic acids without using external ligands or additives. The catalyst was also employed in a one‐pot, three‐component reaction for the efficient and green synthesis of 5‐substituted 1H‐tetrazoles using various aldehydes, hydroxylamine hydrochloride and sodium azide in water. The magnetic catalyst can be easily separated by an external magnet bar and is recycled seven times without significant loss of its activity.     

Synthesis,magnetic and ethanol gas sensing properties of semiconducting magnetite nanoparticles

The superparamagnetic magnetite (Fe₃O₄) nanoparticles with an average size of 7 nm were synthesized using a rapid and facile microwave hydrothermal technique. The structure of the magnetite nanoparticles was characterized by X-ray diffraction (X-ray), field effect scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDS), and transmission electron microscopy (TEM). The prepared Fe₃O₄ was shown to have a cubic phase of pure magnetite. Magnetization hysteresis loop shows that the synthesized magnetite exhibits no hysteretic features with a superparamagnetic behavior. The ethanol gas sensing properties of the synthesized magnetite were investigated, and it was found that the responsibility time is less than 10 s with good reproducibility for ethanol sensor. Accordingly, it is evaluated that the magnetite nanoparticles can be effectively used as a solid state ethanol sensor in industrial commercial product applications.     

Iron Oxide Nanoparticles: Biosynthesis,Magnetic Behavior,Cytotoxic Effect

Iron oxide nanoparticles have attracted much attention because of their superparamagnetic properties and their potential applications in many fields such as magnetic storage devices, catalysis, sensors, superparamagnetic relaxometry (SPMR), and high-sensitivity biomolecule magnetic resonance imaging (MRI) for medical diagnosis and therapeutics. In this study, iron oxide nanoparticles (Fe₂O₃ NPs) have been synthesized using a taranjabin (camelthorn or persian manna) aqueous solution. The synthesized Fe₂O₃ NPs were identified through powder X-ray diffraction (PXRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR), field energy scanning electron microscopy (FESEM), transmission electron microscopy (TEM), energy-dispersive spectroscopy (EDX), vibrating-sample magnetometer (VSM) and Raman technics. The results show that the nanoparticles have a hexagonal structure with 20 to 60 nm in size. The cytotoxic effect of the synthesized nanoparticles has been tested upon application against lung cancer cell (A549) lines. It was found that there is no cytotoxic activity at lower concentrations of 200 μg/mL. The ability of the synthesized nanoparticles for lead removal in wastewaters was tested. Results show that highest concentration of adsorbent (50 mg/L) has maximum removal efficiency (96.73 %). So, synthesized Fe₂O₃ NPs can be a good candidate to use as heavy metals cleaner from contaminated waters.