以SBA-16薄膜/ITO为基底电沉积生长“花状”CdS纳米晶体

在酸性条件下,以导电玻璃(ITO)为基底合成sBA.16分子筛膜.所制备的SBA-16薄膜孔径均匀,具有体心立方结构(属于Im3m空间群).在由CdCl2和Na2S2O3组成的电解液中,调节pH值为2～3.利用直流恒电位电沉积法,调节电位为-0.7 V,沉积时间为50 min,在SBA-16膜/ITO电极表面电沉积生长出"花状"CdS纳米晶体,利用SEM、TEM等技术研究了CdS纳米晶体形貌和结构,同时进行了荧光光谱测试.结果表明,电沉积合成的CdS生长在电极表面而不是生长在介孔孔道中.并能够产生荧光谱峰.     

SBA-16薄膜内生长碳纳米管阵列及其Fe的填充

以表面活性剂F-127、导电玻璃(ITO)为基底制备了三维体心立方结构(Im3m)的介孔SBA-16膜.该膜的(111)晶面垂直于ITO基底.采用电化学沉积技术将少量Fe沉积进入SBA-16膜的孔底,沉积Fe后的SBA-16膜于700℃下乙炔裂解生长碳纳米管,在SBA-16膜(孔)内生长直径均匀、间距相等的开口碳纳米管阵列.采用二次电沉积法可以制备高度有序的填充Fe的碳纳米管阵列.TEM的研究结果表明填充进碳纳米管的Fe具有单晶结构.     

氧化铝模板中直流电沉积镍纳米线

氧化铝模板中直流电沉积镍纳米线;多孔阳极氧化铝模板;镍纳米线;电沉积     

离子液体中电沉积制备钴纳米线阵列

Porous anodic alumina (PAA) was used as a template to prepare Co nanowires array from 1-ethyl-3-methylimidazolium chloride ionic liquid by direct current method. The surface morphology of porous anodic alumina template was observed by field emission-scanning tunneling microscopy (FE-SEM) before and after the electrodeposition of Co nanowires. The electrodeposition of Co nanowires was characterized by transmission electron microscopy (TEM) and X-ray powder diffraction (XRD). TEM results indicate that the Co nanowire surface is coarse and porous when aqueous solution was used as electrolyte， and the Co nanowire deposited from the ionic liquid is uniform and smooth. XRD results show that the electrodeposition of Co is a mixture of crystal and microcrystal phase.     

硫化镉纳米线的电沉积制备及表征

以不同孔径的多孔阳极氧化铝为模板,采用直流电沉积的方法,在含CdCl2和S的DMSO溶液中制备出了CdS纳米线．SEM、TEM表征的结果表明,在不同孔径的多孔阳极氧化铝模板中,通过沉积时间等条件的控制,制得直径不同、长度可达5μm的平行结构、均匀而连续的CdS纳米线阵列．电子衍射和能谱结果显示所得的纳米线属于六方晶系CdS,线中Cd和S原子比接近1：1．     

氢气泡模板电沉积多孔金属镍薄膜

Porous nickel films have been successfully electrodeposited using cathodic hydrogen bubbles as a template. The influence of deposition parameters including concentration, temperature and current density on the films morphologies has been systematically studied. SEM results showed that increase in current density resulted in the deposits with higher pore density and smaller pore size. Both the pore size and thickness of the pore walls increased with the electrolyte temperature range from 20 to 60 ℃ when the other deposition parameters were fixed. Increasing the concentration of NiCl₂ or NH₄Cl in the electrolyte led to the thicker of the pore walls and declined pore size and density. The deposits displayed a dendritic morphology in cross-sectional SEM image. Electrochemical characterization of the porous nickel films after surface oxidation in 1.0 mol·L^-1 NaOH solution showed that specific capacitance as high as 7.2 F·g^-1 could be reached.     

无电沉积高密度钯金属纳米线阵列

利用介孔氧化硅薄膜作为模板,通过无电沉积路线在介孔薄膜孔道内合成了高密度钯金属纳米线阵列.利用介孔薄膜导向剂的疏水区作为载体,引进钯金属疏水化合物并经热解和还原,得到钯微粒,以此为催化中心引发无电沉积,避免了传统无电沉积复杂的工艺过程.结果表明,纳米线尺寸均一,长径比大于60,完全填充了介孔薄膜的孔道,并可通过介孔模板孔径的选择对纳米线直径加以调控.     

模板组装Fe纳米线阵列及其微结构

铝在硫酸溶液中经直流阳极氧化,得到多孔铝阳极氧化膜(AAO). 以AAO膜为模板,通过交流电沉积的方法,在AAO模板孔内成功组装了Fe纳米线.TEM分析表明,Fe纳米线的长度约为2.5 μm,其长度分布十分均匀；粗细均匀,直径约为25 nm. XRD实验分析证实,所制备的Fe纳米线为α-Fe.选区电子衍射（SAED）实验分析表明,α-Fe纳米线具有单晶结构.     

氢气泡模板法电沉积制备三维多孔铜薄膜

应用阴极析氢气泡模板法电沉积制备三维多孔铜薄膜,基础电解液组成为0.2 mol.dm-3CuSO4和1.5 mol.dm-3H2SO4.研究了电流密度(0.5~8.0 A.cm-2)、温度(20~70℃)、支持电解质(Na2SO4)以及添加剂HC l和聚乙二醇(PEG)等对薄膜的孔径大小和孔壁结构的影响.扫描电子显微镜(SEM)分析表明,降低镀液温度和添加Na2SO4、PEG都可降低孔径的大小,但对孔壁结构无影响.加入微量的氯离子可显著改变薄膜的孔壁结构,得到孔壁结构较为致密的三维多孔铜电极.循环伏安(CV)测试结果显示三维多孔铜薄膜电极在碱性条件下电氧化甲醇的电流密度比光滑铜电极提高了近20倍.     

纳米氧化铁的电化学合成

采用金属铁为"牺牲"阳极,不锈钢片为阴极,在无隔膜电解槽中,用电化学法合成纳米氧化铁.通过XRD、FTIR、TG DSC及粒径分布等测试方法对所得的纳米粒子进行了表征和分析.实验表明:离心后得到的胶体放置于40℃的真空干燥箱中干燥后,得到无定型纳米氧化铁粒子;经320℃煅烧3h后,粒子转化为γ Fe2O3,平均粒径为22.0nm;进一步提高煅烧温度,在540℃煅烧3h后,可得到平均粒径为35.2nm的α Fe2O3.     

改性中孔分子筛SBA-16薄膜的合成及表征

在酸性条件下, 以导电玻璃(ITO)为基底合成了SBA-16分子筛膜. 所制备的SBA-16膜孔径均匀, 具有体心立方结构(属于Im3m空间群), SBA-16膜的晶胞参数为18.6 nm. TEM, SEM和XRD等技术研究表明, 加入少量的AlCl₃盐于形成膜的母液并且采用RSiX₃对导电玻璃基底进行处理, 能够明显改善SBA-16膜的连续性而不影响孔结构. 红外(FTIR)研究结果表明, SBA-16膜的表面硅羟基和结晶水很少, 膜很稳定. XPS研究表明, 加入少量MnCl₂对SBA-16膜进行改性, 可以提高膜的导电性.     

铝膜腔体内高度有序的介孔硅SBA-16的合成

在阳极铝膜腔体内, 以三嵌段聚合物F127为表面活性剂合成出一维纳米介孔二氧化硅材料. 采用压力诱导合成方法能使纳米纤维沿着铝膜腔体有序生长排列, 并且只存在于铝膜的腔体内, 在铝膜表面没有残留. 在纳米纤维的两侧可以清楚地观察到具有六边形结构的孔道, 直径为12 nm. 考察了正硅酸乙酯的水解时间以及化合物的不同配比对材料形貌的影响.     

Y2O3和Nd2O3介孔薄膜的制备与表征

以聚乙烯合丁烯-嵌-聚氧乙烯嵌段共聚物(PHB-PEO)作模板, 采用蒸发诱导自组装方法, 分别制备了Y2O3和Nd2O3介孔薄膜. 用小角、广角X射线衍射和透射电子显微镜对薄膜样品在不同的热处理阶段进行了表征. 结果表明, 所制备的Y2O3和Nd2O3薄膜样品呈现一种大孔径(平均孔径分别约为11.5和12.5 nm)、有序的立方扭曲球形孔排列、稳定于450 ℃并具有部分晶态孔壁结构的介孔薄膜材料.     

多孔Fe_2O_3纳米纤维用于高容量长寿命锂空气电池催化剂

采用静电纺丝技术,以乙酰丙酮铁[Fe(C5H7O2)3]、聚乙烯吡咯烷酮(PVP)和二甲基甲酰胺(DMF)为原料,制备了由Fe2O3纳米颗粒组成的高比表面积的多孔纳米纤维,并成功应用于锂氧气电池用催化剂.Fe2O3纳米颗粒为反应提供了充足的活性位点,提高了电池容量;而三维网状结构为反应物及产物提供了足够的反应及储存空间,避免了对电极孔道堵塞的问题,从而达到了锂空气电池长循环的目的.     

Porous NiCo2O4 Nanowire Arrays as Supercapacitor Electrode Materials with Extremely High Cycling Stability

In this work, NiCo₂O₄(NCO) was synthesized via microwave hydrothermal method and a further annea- ling treatment. Research results have shown that the surface defects(Co²⁺ site) and pore size of the materials can be adjusted by simply changing the calcination temperatures, and porous nanowire arrays structure can be obtained. The porous structure is conducive to the penetration of the electrolyte and enables the NCO to fully participate in the electrochemical reaction. What's more, the NCO material has ample space to buffer the volume change in the cycle test, improving the cycling stability. The NCO obtained at 350℃ has better performance. It exhibits a specific capacitance of 648.69 F/g at 1 A/g and good rate capability. Especially, at 10 A/g, the specific capacitance can still be maintained at 80.00% after 10000 galvanostatic charge/discharge(GCD) cycles, showing excellent cycling stability.     

Chemical Vapor Deposition of FeOCl Nanosheet Arrays and Their Conversion to Porous α‐Fe2O3 Photoanodes for Photoelectrochemical Water Splitting

FeOCl nanosheet arrays were deposited on fluorine‐doped tin oxide glass substrates through a chemical vapor deposition method and further converted to hematite porous nanosheet arrays. A much enhanced photocurrent was obtained for such hematite films, which was three times higher than that of a planar hematite film at 1.23 V versus a reversible hydrogen reference electrode.     

以泡沫镍载NiCo2O4纳米线阵列为阴极催化剂的Al-H2O2半燃料电池

研究了以泡沫镍载NiCo2O4纳米线阵列为阴极催化剂的Al-H2O2半燃料电池的性能. 以无模板生长法制备了泡沫镍载NiCo2O4纳米线阵列阴极材料, SEM测定结果表明, NiCo2O4纳米线几乎垂直于泡沫镍载体表面生长. 以电压和功率密度-电流密度曲线研究了H2O2浓度、电解液流速和温度对电池性能的影响, 结果显示, 以铝片为阳极, 0.6 mol/L H2O2为氧化剂的电池的开路电压约为1.40 V; 在室温和57 ℃下, 电流密度为98和172 mA/cm2时, 最大功率密度分别达到79和120 mW/cm2.  在5000 s的测试时间内, 0.70 V的恒电流密度和75 mA/cm2 的恒电压值几乎为一常数, 这表明以泡沫镍载NiCo2O4纳米线阵列为催化剂电还原H2O2具有很好的活性、稳定性和传质性能.