Efficient immobilization of 9,10-anthraquinonyl moiety at solid interfaces through 2-(bromomethyl)anthraquinone one-electron cleavage

We report here a new and very efficient method for the coverage of different carbon materials with 9,10-anthraquinone attached via a methylene linker. The method is based on one-electron reduction of 2-(bromomethyl)anthraquinone (AQ-CH₂-Br) to a free radical AQ–CH₂ which was readily achieved using propylene carbonate (PC) as solvent containing tetrabutylammonium iodide. This way, the radical AQ–CH₂ adds to the abovementioned carbons forming very stable and dense covalently bound anhraquinonyl methane layers (Г ≈ 2 × 10^− 9 mol cm^− 2). The grafting could be performed by constant potential electrolyses (q < 0.5 × 10^− 3 C mm^− 2).     

Near-infrared spectroscopy as an effective tool for monitoring the conformation of alkylammonium surfactants in montmorillonite interlayers

Application of near-infrared (NIR) spectroscopy to probing the arrangement of trimethylalkylammonium cations in montmorillonite interlayers has been demonstrated. Detailed analysis of the mid-IR (MIR) and NIR spectra of montmorillonite from Jelšový Potok (JP, Slovakia) saturated with surfactants with varying alkyl chain length (even numbers of carbon atoms from C6 to C18) was performed to show the advantages of the NIR region in characterizing surfactant conformations. The position of the ν_as(CH₂), (∼2930–2920 cm⁻¹), ν_s(CH₂) (∼2860–2850 cm⁻¹), 2ν_as(CH₂) (∼5810–5785 cm⁻¹), (ν + δ)_as(CH₂) (∼4340–4330 cm⁻¹) and (ν + δ)_s(CH₂) (∼4270–4250 cm⁻¹) signals was used as an indicator of the gauche/trans conformer ratio. For all bands, a shift toward lower wavenumber on increasing the alkyl chain length from 6 to 18 carbons suggests a transition from disordered liquid-like to more ordered solid-like structures of the surfactants. The magnitude of the shift was significantly higher for 2ν_as(CH₂) (28 cm⁻¹) than for ν_as(CH₂) (8 cm⁻¹) or ν_s(CH₂) (10 cm⁻¹), showing the NIR region to be a useful tool for examining this issue. Comparison of the IR spectra of crystalline alkylammonium salts and the corresponding organo-montmorillonites demonstrated a confining effect of montmorillonite layers on surfactant ordering. For each alkyl chain length the CH₂ bands of the organo-montmorillonites appeared at higher wavenumbers than for the unconfined surfactant, thus indicating a higher disorder of the alkyl chains. The wavenumber difference between corresponding samples was always higher in the NIR than in the MIR region. All these findings show NIR spectroscopy to be useful for conformational studies.     

Simultaneous determination of acetaminophen,dopamine and ascorbic acid using a PbS nanoparticles Schiff base-modified carbon paste electrode

A highly sensitive method was investigated for the simultaneous determination of acetaminophen (AC), dopamine (DA), and ascorbic acid (AA) using a PbS nanoparticles Schiff base-modified carbon paste electrode (PSNSB/CPE). Differential pulse voltammetry peak currents of AC, DA and AA increased linearly with their concentrations within the ranges of 3.30 × 10⁻⁸–1.58 × 10⁻⁴ M, 5.0 × 10⁻⁸–1.2 × 10⁻⁴ M and 2.50 × 10⁻⁶–1.05 × 10⁻³ M, respectively, and the detection limits for AC, DA and AA were 5.36 × 10⁻⁹, 2.45 × 10⁻⁹ and 1.86 × 10⁻⁸ M, respectively. The peak potentials recorded in a phosphate buffer solution (PBS) of pH 4.6 were 0.672, 0.390, and 0.168 V (vs Ag/AgCl) for AC, DA and AA, respectively. The modified electrode was used for the determination of AC, DA, and AA simultaneously in real and synthetic samples.     

One-step fabrication of chitosan–hematite nanotubes composite film and its biosensing for hydrogen peroxide

This work reports on a novel chitosan–hematite nanotubes composite film on a gold foil by a simple one-step electrodeposition method. The hybrid chitosan–hematite nanotubes (Chi–HeNTs) film exhibits strong electrocatalytic reduction activity for H₂O₂. Interestingly, two electrocatalytic reduction peaks are observed at −0.24 and −0.56 V (vs SCE), respectively, one controlled by surface wave and the other controlled by diffusion process. The Chi–HeNTs/Au electrode shows a linear response to H₂O₂ concentration ranging from 1 × 10⁻⁶ to 1.6 × 10⁻⁵ mol L⁻¹ with a detection limit of 5 × 10⁻⁸ mol L⁻¹ and a sensitivity as high as 1859 μA μM⁻¹ cm⁻².     

Highly selective thiocyanate electrode based on bis-bebzoin-semitriethylenetetraamine binuclear copper(II) complex as neutral carrier

A novel selective thiocyanate PVC membrane electrode based on bis-bebzoin-semitriethylenetetraamine binuclear copper(II) [Cu(II)₂–BBSTA] as neutral carrier is reported, which displays an anti-Hofmeister selectivity sequence in following order: SCN⁻ > ClO₄⁻ > I⁻ >Sal⁻ >SO₃²⁻ >NO₃⁻ > H₂PO₄⁻ > Cl⁻ >NO₂⁻ > SO₄²⁻. The electrode exhibits Nernstian potential linear range to thiocyanate from 1.0 × 10⁻¹ to 9.0 × 10⁻⁷ mol/l with a detection limit 7.0 × 10⁻⁷ mol/l and a slope of −57.0 mV/decade in pH 5.0 of phosphorate buffer solution at 25 °C. The response mechanism is discussed in view of the AC impedance technique and the UV spectroscopy technique. From comparison of potentiometric response characteristics between the binuclear metallic complex copper(II) [Cu(II)₂–BBSTA] and mononuclear copper(II) metallic complex [Cu(II)–BBSDA], an enhanced response towards thiocyanate from the electrode based on binuclear metallic complex copper (II) [Cu(II)₂–BBSTA] was observed. The electrode based on binuclear copper(II) compound was used to determine the thiocyanate content in waste water with satisfactory results.     

The partition coefficients of ethylene between vapor and hydrate phase for methane + ethylene + THF + water systems

The vapor-hydrate equilibria were studied experimentally in detail for CH₄ + C₂H₄ + tetrahydrofuran (THF) + water systems in the temperature range of 273.15–282.15 K, pressure range of 2.0–4.5 MPa, the initial gas–liquid volume ratio range of 45–170 standard volumes of gas per volume of liquid and THF concentration range of 4–12 mol%. The results demonstrated that, because of the presence of THF, ethylene was remarkably enriched in vapor phase instead of being enriched in hydrate phase for CH₄ + C₂H₄ + water system. This conclusion is of industrial significance; it implies that it is feasible to enrich ethylene from gas mixture, e.g., various kinds of refinery gases or cracking gases in ethylene plant, by forming hydrate.     

Electrochemical oxidation behavior of nitrite on a chitosan-carboxylated multiwall carbon nanotube modified electrode

A novel chitosan-carboxylated multiwall carbon nanotube modified glassy carbon electrode (MC/GCE) was developed to investigate the oxidation behavior of nitrite using cyclic voltammetry and differential pulse voltammetry modes. The electrochemical mechanism of the MC/GCE towards nitrite was discussed. The MC/GCE exhibited fast response towards nitrite with a detection limit of 1 × 10⁻⁷ mol l⁻¹ and a linear range of 5 × 10⁻⁷–1 × 10⁻⁴ mol l⁻¹. The possible interference from several common ions was tested. The proposed method was successfully applied in the detection of nitrite in real samples.     

Potential energy surface and rate constant of the inversion substitution reactions CH3X + O2 → CH3O2• + X• (X = SH,NO2)

The temperature dependence of the rate constant of the inversion substitution reactions CH₃X + O₂ → CH₃O₂^? + X^? (X = SH, NO₂), can be expressed as k = 6.8 × 10^–12(T/1000)^1.49exp(–62816 cal mol^–1/RT) cm³ s^–1 (X = SH) and k = 6.8 × 10^–12(T/1000)^1.26 × × exp(–61319 cal mol^–1/RT) cm³ s^–1 (X = NO₂), as found with the use of high-level quantum chemical methods and the transition state theory.     

Thermal electron capture by some halopropanes

Thermal electron attachment rate constants for CF₃CHClCH₃, CF₂ClCFClCF₃ and CBrF₂CH₂CH₂Br have been measured with electron swarm method. Corresponding rate constants are equal to 7.6×10⁻¹¹, 5.5×10⁻⁹ and 1.5×10⁻⁸ cm³ molecule⁻¹ s⁻¹, respectively. The dissociative electron attachment (DEA) spectra for nine haloalkanes have been determined using negative ion mass spectrometry. The correlation between rate constants, position of the DEA peaks and vertical attachment energy (VAE) available in literature has been demonstrated.     

A time-resolved study of the multiphase chemistry of excited carbonyls: Imidazole-2-carboxaldehyde and halides

Imidazole-2-carboxaldehyde (IC) reactivity in the presence of halide anions (Cl^–, Br^–, I^–) has been studied by laser flash photolysis in aqueous solution at room temperature. The absorption spectrum of the triplet state of IC has been measured with a maximum absorption at 330 nm and a weaker absorption band around 650 nm. Iodide anions proved to be efficient quenchers of the triplet state IC, with a rate coefficient k_q of (5.33 ± 0.25) × 10⁹ M⁻¹ s⁻¹. Quenching by bromide and chloride anions was less efficient, with k_q values of (6.27 ± 0.53) × 10⁶ M⁻¹ s⁻¹ and (1.31 ± 0.16) × 10⁵ M⁻¹ s⁻¹, respectively. The halide (X^–) quenches the triplet state; the resulting transient absorption feature matches that of the corresponding radical anion (X₂^–). We suggest that this type of quenching reactions is a driving force of oxidation reactions in the oceanic surface microlayer (SML) and a source of halogen atoms in the atmosphere.     

An FT-IR study of the isomerization of 1-butoxy radicals under atmospheric conditions

Relative rate-studies of the reactions of 1-butoxy radicals have been carried out using a 47 L static reactor with detection of end products by FT-IR spectroscopy. Experiments were performed at 700 torr total pressure and over the temperature range 253–295 K. The chemistry of 1-butoxy is characterized by a competition between reaction with oxygen CH₃CH₂CH₂CH₂O + O₂ → n-C₃H₇CHO + HO₂ (R2), which yields butanal and isomerization CH₃CH₂CH₂CH₂O → CH₂CH₂CH₂CH₂OH (R3), to form a hydroxylated carbonyl-product. A reference spectrum attributed to the product of 1-butoxy isomerization was obtained and used to determine the competition between 1-butoxy isomerization versus reaction with oxygen. The results indicate that isomerization is the dominant fate of 1-butoxy radicals at ambient temperature and pressure and that its importance decreases with decreasing temperature. The rate-coefficient ratio k₃/k₂ (molecule cm⁻³) = 5.5 × 10²³ exp[(−25.1 ± 0.9 kJmol⁻¹)/RT] was obtained. This agrees with other estimates based on methods without monitoring of the isomerization product.     

Activity and stability of horseradish peroxidase in hydrophilic room temperature ionic liquid and its application in non-aqueous biosensing

The activity and stability of horseradish peroxidase (HRP) were investigated in a hydrophilic room temperature ionic liquid 1-butyl-3-methylimidazolium tetrafluroborate ([bmim][BF₄]) by electrochemical methods. Although no detectable activity exhibited in anhydrous [bmim][BF₄], HRP was active in the presence of a small amount of water (4.53%, v/v). And its activity can be improved by immobilization in agarose hydrogel. The immobilized HRP possesses excellent activity at 65 °C. It remained 80.2% of its initial activity after being immersed for 10.5 h in an aqueous mixture of [bmim][BF₄] with some hydrogen peroxide (H₂O₂) under room temperature, implying extremely high stability. Moreover, the immobilized HRP was found to be very sensitive and stable in H₂O-containing [bmim][BF₄] for the detection of H₂O₂, with a wide linear range of 6.10 × 10⁻⁷ to 1.32 × 10⁻⁴ mol l⁻¹ and low detection limit of 1.0 × 10⁻⁷ mol l⁻¹.     

Photo-induced degradation of some flavins in aqueous solution

The blue-light induced photo-degradation of FMN, FAD, riboflavin, lumiflavin, and lumichrome in aqueous solution at pH 8 is studied by measurement of absorption coefficient spectral changes due to continuous excitation at 428 nm. The quantum yields of photo-degradation determined are ϕ_D(riboflavin, pH 8) ≈ 7.8 × 10⁻³, ϕ_D(FMN, pH 5.6) ≈ 7.3 × 10⁻³, ϕ_D(FMN, pH 8) ≈ 4.6 × 10⁻³, ϕ_D(FAD, pH 8) ≈ 3.7 × 10⁻⁴, ϕ_D(lumichrome, pH 8) ≈ 1.8 × 10⁻⁴, and ϕ_D(lumiflavin, pH 8) ⩽ 1.1 × 10⁻⁵. In a mass-spectroscopic analysis, the photo-products of FMN dissolved in water (solution pH is 5.6) were identified to be lumichrome and the lumiflavin derivatives dihydroxymethyllumiflavin, formyllumiflavin, and lumiflavin-hydroxy-acetaldehyde. An absorption and emission spectroscopic characterisation of the primary photoproducts of FMN at pH 8 is carried out.     

Electrospun zirconia-embedded carbon nanofibre for high-sensitive determination of methyl parathion

Carbon nanofibers embedded with ultrafine zirconia nanoparticles (ZrO₂-CNFs) are fabricated via a new methodology. Polyvinylpyrrolidone (PVP) and polymethylmethacrylate (PMMA) binary polymers containing zirconium n-butoxide are first dissolved in dimethylformamide, and the resulting solution is electrospun and heat-treated. The tetragonal zirconia nanoparticles formed, with a size of 5 ± 2 nm in diameter, are uniformly distributed in the carbon nanofibres. Using Nafion as an additive, ZrO₂-CNFs are drop-cast onto the glassy carbon electrode (ZrO₂-CNF/GCE) and the modified electrode is then applied to detect methyl parathion (MP) using differential pulse voltammetry. Two linear relationships are found at the concentration ranges of 1 × 10^− 9–2 × 10^− 8 g/L and 2 × 10^− 8–2 × 10^− 7 g/L, with a detection limit of 3.4 × 10^− 10 g/L (S/N > 3). The electrospun-based ZrO₂-CNF is a very promising coating material for electrochemical sensing of organophosphorus compounds.     

Selective colorimetric assay of cyanide ions using a thioamide-based probe containing phenol and pyridyl groups

The selective assay of cyanide ions with a thioamide compound (HNPTU) containing phenol and pyridine as a chemosensor is reported using absorbance changes in a buffered aqueous solution (50 mM HEPES, pH 7.4) containing ethanol. Upon treatment with cyanide ions, the colorless solution of HNPTU turned yellow. No significant changes were observed with other comparable anions, such as F⁻, Cl⁻, Br⁻, I⁻, and CH₃COO⁻. The color change of HNPTU upon treatment with CN⁻ was maintained even in the presence of the comparable monovalent anions. The complex stability constant (K_a = 2.6 × 10³) for the stoichiometric 1:1 complexation of HNPTU with cyanide ions was obtained based on absorbance titrations. The interaction of HNPTU with cyanide ions was proposed to be deprotonation, as shown by NMR and Cu(II) treatment experiments.     

Process Improvement of Biogas Production from Anaerobic Co-digestion of Cow Dung and Corn Husk

A study of organic loading rate (OLR) and effect of NaOH concentration on the pretreatment stage of corn husk (CH) was conducted by Face-Centered Central Composite Design (CCF) to improve the biogas production. Three levels of OLR at 25.0 g VS · L⁻¹ · d⁻¹ (OLR₂₅), 35.0 g VS · L⁻¹ · d⁻¹ (OLR₃₅), and 45.0 g VS · L⁻¹ · d⁻¹ (OLR₄₅) were performed with NaOH pretreatment concentration of CH at 25.0% (N₂₅), 35.0% (N₃₅), and 45.0% (N₄₅) (w/w). The optimum production of biogas at 67.6 mL · min⁻¹ with methane concentration of 63.4% has been obtained at the application of OLR at 43.6 g VS · L⁻¹ · d⁻¹ and NaOH concentration at 33% (w/w).     

Voltammetric determination of tert-butylhydroquinone in biodiesel using a carbon paste electrode in the presence of surfactant

This paper reports an electroanalytical method developed for determining the antioxidant tert-butylhydroquinone (TBHQ) in biodiesel, based on the enhancement effect of cetyltrimethylammonium bromide (CTAB). In pH 6.5 Britton–Robinson buffer, a poorly defined oxidation peak was observed for TBHQ at a carbon paste electrode (CPE). In the presence of low concentrations of CTAB, however, the oxidation peak current was markedly increased. Several parameters were studied and optimized for the development of this methodology, and under optimal conditions the oxidation peak current was proportional to TBHQ concentration in the range of (1.05–10.15) × 10⁻⁶ mol L⁻¹, with limits of detection and quantification of 7.11 × 10⁻⁸ mol L⁻¹ and 2.37 × 10⁻⁷ mol L⁻¹, respectively, by linear sweep voltammetry (LSV). The method was applied to TBHQ determination in soybean biodiesel samples. The results were satisfactory in comparison with those obtained using high-performance liquid chromatography (HPLC).     

The determination of cysteine at Bi-powder carbon paste electrodes by cathodic stripping voltammetry

The determination of cysteine by means of square wave cathodic stripping voltammetry (SWCSV) is reported here for the first time at Bi-modified carbon paste electrodes (CPEs). The modified electrodes are 17% w/w metallic Bi powder mixed with CP (Bi-CPEs) and the technique is based on the enhancement of Bi surface oxidation in the presence of cysteine at a carefully chosen accumulation potential and the subsequent reduction-stripping of the product (proposed to be bismuth(III) cysteinate) by potential scanning to more negative values. The wide concentration range of 1 × 10⁻⁶–5 × 10⁻⁵ M for cysteine can be assessed by SWCSV using Bi-CPEs and, by appropriate choice of accumulation times, two linear response concentration regimes could be identified: 1 × 10⁻⁶–1 × 10⁻⁵ M (accumulation for 600 s) and 1 × 10⁻⁵–5 × 10⁻⁵ M (accumulation for 100 s), with estimated detection limits of 3 × 10⁻⁷ and 2 × 10⁻⁶ M, respectively.     

Dehydration of tetrahydrofuran by pervaporation using a composite membrane

Tetrahydrofuran (THF) is a strong aprotic solvent, commonly used in the pharmaceuticals industry due to its broad solvency for both polar and non-polar compounds. THF and water form a homogeneous azeotrope at 5.3 wt.% water thus simple distillation is not feasible to dehydrate THF below this concentration. Pervaporation offers a solution since it is not governed by vapour–liquid equilibria. However many polymer-based pervaporation membranes are cast utilizing THF as the casting solvent and so these membranes have a tendency to swell excessively in its presence. This results in poor separation performance and poor long-term stability and thus renders these membranes unsuitable for THF dehydration.In this study, a new membrane available from CM Celfa, CMC-VP-31 has been tested for the dehydration of THF. The membrane shows excellent performance when dehydrating THF with a flux of over 4 kg m⁻² h⁻¹ when dehydrating THF containing 10 wt.% water at 55 °C dropping to 0.12 kg m⁻² h⁻¹ at a water content of 0.3 wt.%. The permeances of water and THF in the membrane were calculated to be 11.76 × 10⁻⁶ and 7.36 × 10⁻⁸ mol m⁻² s⁻¹ Pa⁻¹, respectively, at 25 °C and found to decrease in the membrane with increasing temperature to values of 6.71 × 10⁻⁶ and 1.63 × 10⁻⁸ mol m⁻² s⁻¹ Pa⁻¹ at 55 °C. The flux and separation factor were both found to increase with an increase in temperature thus favouring the operation of CMC-VP-31 at high temperatures to optimize separation performance.