离子液体催化剂用于煤焦化苯深度脱硫制无硫苯

从扩大有机合成用苯的需求出发,采用研制的离子液体催化剂考察了煤焦化苯深度脱硫制无硫苯的过程。结果表明：N-甲基咪唑硫酸氢盐[Hmim][HSO₄]离子液体催化剂脱噻吩效果与其酸函数值有关。本文采用Hammett指示剂测定离子液体的酸函数H₀,并得出：在-4至-12的范围,离子液体催化剂可以使煤焦化苯噻吩脱至0. 5mg/L以下。与固体酸催化机理相似,酸量和酸强度一定的离子液体催化剂通过Friedel-Crafts反应形成烷基噻吩等,与苯的物性拉开距离,对苯的分离精制是必不可少的,但是过多、过强的[Hmim][HSO₄]酸值也更有利于苯-噻吩-烯烃共聚合等副反应的发生,从而影响离子液体催化剂重复使用的寿命。本研究利用煤焦化苯脱硫反应形成的噻吩衍生物作为提供电荷流通的聚合物,将反复使用后性能不佳的离子液体成分等作为“受电子型”和“给电子型”的掺杂剂,进行导电（抗静电）材料的制备。结果显示：对煤焦化苯脱硫形成的噻吩衍生物等可以用于掺杂导电材料的试制。     

Exploring novel poly(thiophene‐3‐yl‐amine) through facile self acid assisted‐polycondensation

Aromatic moieties of benzene and pyridine as side chains for poly(thiophene‐3‐yl‐amine) are rationally designed and synthesized by facile self acid‐assisted polycondensation (SAAP). Nitrogen atom is the key atom to form ammonium cation which guarantees SAAP success while other aromatic moieties are chosen carefully to attach on N atom to functionalize poly(thiophene‐3‐yl‐amine) matrix. Our results indicate that thiophene‐3‐yl‐amine is an excellent platform to construct plenty of functionalized monomers candidates for SAAP. Our study would push SAAP or AAP scope forward and pave the way to explore much more polythiophene derivatives. Furthermore, DFT calculation is carried out to deep understand AAP mechanism. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 4003–4012     

Synthesis and properties of polythiophenes with conjugated side‐chains containing carbon–carbon double and triple bonds

Two soluble side‐chain conjugated polythiophenes, poly{3‐[2‐(4‐octyloxy‐phenyl)‐vinyl]‐thiophene} (P3OPVT) and poly{3‐(4‐octyloxy‐phenylethynyl)‐thiophene} (P3OPET) have been synthesized successfully. In P3OPVT and P3OPET, substituted benzene rings are connected with the polythiophene backbone through trans carbon–carbon double bond and carbon–carbon triple bond, respectively. Absorption spectra of the P3OPVT and P3OPET both show two absorption peaks located in UV and visible region, respectively. The results of optical and electrochemical measurements indicate that the conjugated side‐chains can reduce the bandgap effectively. This type of side‐chain conjugated polythiophenes may be promising for the applications in polymer photovoltaic cells and field effect transistors. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2206–2214, 2006     

The Intramolecular Interaction of Thiophene and Furan with Aromatic and Fluoroaromatic Systems in Some [3.3]Meta(heterocyclo)paracyclophanes: A Combined Computational and NMR Spectroscopic Study

Four thiophene‐ and furan‐containing [3.3]meta(heterocyclo)paracyclophanes were designed and synthesized to study the intramolecular interaction between standard heteroaromatic rings and tetra‐H‐ or tetra‐F‐substituted benzenes. A complete conformational analysis, carried out by DFT calculations and variable‐temperature NMR techniques, showed that, despite their structural similarity, these adducts have different conformational preferences and undergo different types of isomerizations depending on the nature of the heterocycle. The thiophene‐derived adducts adopted a parallel stacked arrangement of the aromatic systems in the ground‐state conformations. Their isomerization pathways involved a thiophene ring‐flip process passing through an edge‐to‐face arranged transition state in which the heterocycle is perpendicular to the benzene platform and its sulfur atom points toward the center of that ring. The threshold energy barrier to the ring‐flip process was higher by 10 kJ mol^?1 in the case of the adduct featuring the perfluorinated benzene. This difference was rationalized by assuming that the ground‐state conformations of the H‐ and F‐substituted compounds have different stability. On the contrary, the furan‐derived adducts were shown by calculations and NMR spectroscopy to adopt, in their ground‐state conformations, a perpendicular edge‐to‐face disposition of the rings with the oxygen atom pointing toward the benzene platform. The adoption of this arrangement was confirmed by X‐ray crystallography. In the case of these compounds, the isomerization process involved distortion of the CH₂SCH₂ bridges connecting the aromatic systems and the adoption of transition‐state geometries for which the rings were arranged in a parallel‐stacked orientation. Once again a very nice agreement was observed between the predicted and the experimentally determined geometries and pathways. In the case of the furan‐containing compounds, the threshold barriers were found to be much lower in energy that those observed for the thiophene derivatives. Remarkably, they were virtually independent of the presence of fluorine atoms on the platform benzene ring.     

Synthesis and characterization of cross‐shaped p–n diblock oligomers

The cross‐shaped p–n diblock oligomers based on oligothiophenes (OTs) and 1,3,4‐oxadiazole (OXD) were synthesized and investigated regarding optical properties, electrochemistry, quantum chemical calculations, and intramolecular energy transfer. Since only one emission peak is observed in PL spectra of the oligomers, it is evidenced that effective energy transfer from the OXD to OTs branch. The electrochemical experiments show that almost complete spatial separation of HOMO and LUMO with the thiophene number increasing. The theoretical calculations were carried out regarding which conformer is the lowest in energy, the torsion angle between thiophene/oxadiazole and the central benzene ring, and electron densities distributions of the oligomers. Based on all data, a model for intramolecular energy‐transfer process has been put forward to explain the optical properties. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1066–1073, 2007     

Stacking patterns of thieno[3,2‐b]thiophenes functionalized by sequential palladium‐catalyzed Suzuki and Heck cross‐coupling reactions

The crystal structures of three 5‐alkenyl‐2‐arylthieno[3,2‐b]thiophenes, namely 3,6‐dibromo‐5‐(4‐tert‐butylstyryl)‐2‐(naphthalen‐1‐yl)thieno[3,2‐b]thiophene, C₂₈H₂₂Br₂S₂, (I), 3,6‐dibromo‐5‐(4‐methylstyryl)‐2‐(naphthalen‐1‐yl)thieno[3,2‐b]thiophene, C₂₅H₁₆Br₂S₂, (II), and 3,6‐dibromo‐2‐(4‐tert‐butylphenyl)‐5‐(4‐methylstyryl)thieno[3,2‐b]thiophene, C₂₅H₂₂Br₂S₂, (III), have been determined in order to evaluate the geometry of the molecules. The π‐conjugated system containing the thieno[3,2‐b]thiophene skeleton, the ethylene bridge and the phenyl rings is almost planar. The aromatic ring directly attached to the thieno[3,2‐b]thiophene moiety is not coplanar with the thieno[3,2‐b]thiophene moiety itself due to steric hindrance of the bromo substituent. The crystal packings are characterized by π–π stacking [only for (II)] and C—Br...π interactions. The long axes of the molecules in (I) are oriented in two directions; for the two other structures the long axis is oriented in one direction only.     

Direct Arylation of 5‐Iodouracil and 5‐Iodouridine with Heteroarenes and Benzene via Photochemical Reaction

A method for the direct arylation of 5‐iodouracil and 5‐iodouridine was found to proceed in moderate yields. By irradiating mixtures of 5‐iodouracil or 5‐iodouridine and a series of five‐membered heterocycles such as 1H‐pyrrole, furan, 2‐methylfuran, 1‐methyl‐1H‐pyrrole, thiophene, as well as benzene in MeCN/H₂O with a Hg lamp, 5‐aryluracils and 5‐aryluridines were synthesized. The reaction proceeded smoothly without the requirement of adding any transition metals or ligands.     

Azide/alkyne‐“click”‐reactions on amino resin materials: An LC‐ESI‐TOF analysis

This article describes the reaction of amino resins with functional molecules using the azide/alkyne‐“click”‐reaction, opening a simple chemical modification of amino resins under aqueous conditions. Alkyne‐modified melamine‐formaldehyde resins are prepared via a direct cocondensation approach using propargylic alcohol (21.6–86.3 mmol) as additive. Subsequently, alkyne‐modified mono‐, bi‐, and trinuclear melamine‐species are identified via LC‐ESI‐TOF methods proving the covalent incorporation of alkyne‐moieties in amounts of up to 3.9 mol %. Subsequent modification of the alkyne‐modified resins was accomplished by reaction of functional azides (octyl azide (1), (azidomethyl)benzene (2), 1‐(6‐azidohexyl) thymine (3), and 4‐azido‐N‐(2,2,6,6‐tetramethylpiperidin‐4‐yl)benzamide (4)) with Cu(I)Br and DIPEA as a base. The formation of triazolyl‐modified MF‐resins was proven by LC‐ESI‐TOF methods, indicating the successful covalent modification of the amino resin with the azides 1 – 4 . © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of thiophene/phenylene co‐oligomers. IV. 6‐ to 8‐ring molecules

We report the synthesis of various thiophene/phenylene co‐oligomers with a total number of thiophene and benzene (phenylene) rings of 6 to 8. These compounds include a phenyl‐capped sexithiophene, a thienyl‐capped quaterphenylene, as well as block and alternating co‐oligomers. The synthesis is based on either the Suzuki coupling reaction or the direct dimerization coupling. The latter method produces symmetric molecules with an even total ring number. These reaction schemes enabled us to obtain the target compounds in high quality. Although the resulting materials are difficult to dissolve in organic solvents and therefore difficult to identify by usual ¹H nmr spectroscopy, they have successfully been identified through Fourier‐transform ir spectroscopy. The specific group frequencies of ring‐stretching and out‐of‐plane deformation modes are characteristic of the substitution pattern of the individual thiophene and benzene rings.     

Electronic spectra and first‐order hyperpolarizability of 4‐(dicyanomethylene)‐2,6‐bis‐ (2′‐thiophene‐vinyl)‐pyran derivatives

On the basis of the ZINDO program, we have designed a program to calculate the first‐order hyperpolarizability β_ijk and β_μ according to the sum‐over‐states (SOS) expression. The first‐order hyperpolarizability of 4‐(dicyanomethylene)‐2,6‐bis‐(2′‐thiophene‐vinyl)‐pyran derivatives were studied. The calculated results were that the 4‐(dicyanomethylene)‐2,6‐bis‐(2′‐thiophene‐vinyl)‐pyran derivatives exhibit good nonlinearity with their β₀ values, which are slightly less than that of the corresponding 2,6‐bis‐styryl‐4‐(dicyanomethylene)‐pyran derivatives. It does not agree with the auxiliary donor–acceptor effects theory. The 4‐(dicyanomethylene)‐2,6‐bis‐(2′‐thiophene‐vinyl)‐pyran derivatives, having two low‐lying electronic excited states that contribute to the molecular hyperpolarizability in an additive manner, are good candidates as chromophores due to their high nonlinearities and good thermal stability. © 2001 John Wiley & Sons, Inc. Int J Quant Chem 82: 65–72, 2001     

Thiophene–phenylene/naphthalene‐based step‐ladder copolymers

A series of step‐ladder copolymers based on thiophene–phenylene–thiophene SL1 ‐ SL3 and thiophene–naphthylene–thiophene SL4 repeat units with varying lengths of the oligothiophene segment has been designed and synthesized via a microwave‐assisted Stille‐type cross‐coupling reaction followed by a polymer‐analogous cyclization reaction. The optical properties of the step‐ladder copolymers have been investigated in detail, in particular at low temperature and in the solid‐state. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7342–7353, 2008     

Photoluminescent properties of poly(p‐phenylene vinylene thiophene‐co‐siloxane)

A new p‐phenylene–vinylene–thiophene‐based siloxane block copolymer has been synthesized. The copolymer consists of alternating rigid and flexible blocks. The rigid blocks are composed of phenylene–vinylene–thiophene‐based units, and the flexible blocks are derived from 1,3‐dialkyldisiloxane units. The former component acts as the chromophore, and allows fine tuning of band gap for blue‐light emission, while the latter imparts good solubility of the copolymer in organic solvents, and thus, should enhance processibility of the resulting copolymer. The thermal properties of the copolymer have been characterized by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The photoluminescence (PL) of the copolymer in solution and in cast film has been studied. The effects of concentration on the PL intensity of the new copolymer in polymer blends with poly(methyl methacrylate) (PMMA) and poly(vinyl carbazole) (PVK) have also been described. Efficient energy transfer from PVK to the new block copolymer in the blended film was observed. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1450–1456, 2000     

Tragacanth gum‐based pH‐responsive magnetic hydrogels for “smart” chemo/hyperthermia therapy of solid tumors

The drug delivery performances of pH‐responsive magnetic hydrogels (MHs) composed of tragacanth gum (TG), poly(acrylic acid) (PAA), and Fe₃O₄ nanoparticles (NPs) were investigated in terms of physicochemical as well as biological features. The fabricated drug delivery systems (DDSs) were analyzed using Fourier transform infrared spectroscopy, X‐ray diffraction, vibrating sample magnetometer, scanning electron microscopy, and transmission electron microscopy. The synthesized MHs were loaded with doxorubicin hydrochloride (Dox) as a universal model anti‐cancer drug. The MHs showed excellent Dox loading and encapsulation efficiencies, mainly due to strong hydrogen bonding and electrostatic interaction between the drug and polymeric matrix, as well as porous micro‐structures of the fabricated MHs. The drug‐loaded MHs showed negligible drug release values in physiological condition. In contrast, in cancerous condition (pH 5.0), both MHs exhibited highest drug release values that qualified them as “smart” DDSs. The cytocompatibilities of the MHs as well as the cytotoxicity of the Dox‐loaded MHs were investigated against human epidermoid‐like carcinoma (Hela) cells through MTT assay. In addition, hyperthermia therapy induced by Fe₃O₄ NPs was applied to locally raise temperature inside the Hela cells at 45 ± 3°C to promote cell death. As a result, the Dox‐loaded MHs can be considered as potential DDSs for chemo/hyperthermia therapy of solid tumors.     

Diketopyrrolopyrrole?Thiophene‐Based Acceptor–Donor–Acceptor Conjugated Materials for High‐Performance Field‐Effect Transistors

We report the synthesis, morphology, and field‐effect‐transistor (FET) characteristics of new acceptor–donor–acceptor conjugated materials that consist of diketopyrrolopyrrole (DPP) acceptor groups and one of four different thiophene moieties, that is, dithiophene (2T), thieno[3,2‐b]‐thiophene (TT), dithieno[3,2‐b:2′,3′‐d]‐thiophene (DTT), and 5,5′′′‐di‐(2‐ethylhexyl)‐[2,3′;5′,2′′;4′′,2′′′]quaterthiophene (4T). The optical band gaps of the as‐prepared materials are smaller than 1.7 eV, which is attributed to the strong intramolecular charge transfer and the backbone coplanarity of the thiophene moieties. The order of both crystallinity and FET mobility (×10^?2–×10^?4 cm² V^?1 s^?1) is TT2DPP > 4T2DPP > 2T2DPP >DTT2DP, which differ in the structure of the π‐conjugated cores and core symmetry. Well‐ordered intermolecular chain packing was confirmed by the GIXD and AFM results. In particular, the FET hole mobility of TT2DPP was further improved to 0.1 cm² V^?1 s^?1, which was attributed to the well‐interconnected structure through solution‐shearing. These experimental results suggest the potential applications of the new DPP? thiophene? DPP conjugated materials for organic electronic devices.     

NMR studies on 4‐thio‐5‐furan‐modified and 4‐thio‐5‐thiophene‐modified nucleosides

Systematic NMR characterization of 4‐thio‐5‐furan‐pyrimidine nucleosides or 4‐thio‐5‐thiophene‐pyrimidine nucleosides (ribonucleosides and 2′‐deoxynucleosides) was performed. All proton and carbon signals of 4‐thio‐5‐thiophene‐ribouridine and related analogues were unambiguously assigned. The orientations of the base (4‐thiouridine or its deoxy analogue) relative to the ring (furan or thiophene) are explored by a NMR approach and further supported by X‐ray crystallographic studies. The procedures presented here would be applicable to other modified nucleosides and nucleotides. Copyright © 2016 John Wiley & Sons, Ltd.     

分子模拟噻吩、苯、正己烷混合物在MFI和MOR中的吸附行为

采用GCMC方法模拟了噻吩-苯二元组分和噻吩-苯-正己烷三元组分在MFI和MOR沸石中的吸附分离性能. 结果表明, 对于噻吩-苯二元体系, 在MFI孔道中, 噻吩分子比苯分子都优先定位于孔道的交叉部分, 当总压升高时, 苯的吸附量增加, 噻吩的吸附量保持不变, 苯分子被噻吩分子“挤”到直型孔道之中, 该二元体系符合Clark等提出的竞争吸附模型. 而对于在MOR中的吸附, 噻吩和苯分子没有表现出明显不同的优先吸附位, 符合Clark等提出的体积填充模型. 对于噻吩-苯-正己烷三元体系, 在MFI沸石中, 正己烷的吸附量最大, 噻吩和苯的吸附量很小. 而对于MOR沸石, 噻吩的吸附量最大, 苯和正己烷的吸附量小, 对于这三种较大尺寸的分子, 只能位于MOR主孔道中, 当存在着少量的正己烷分子时, 就影响到了苯的吸附, 而正己烷对噻吩在MOR孔道中填充的影响要比苯小, 噻吩的吸附量影响不大.     

A Palladium(II)‐Catalyzed C?H Activation Cascade Sequence for Polyheterocycle Formation

Polyheterocycles are found in many natural products and are useful moieties in functional materials and drug design. As part of a program towards the synthesis of Stemona alkaloids, a novel palladium(II)‐catalyzed C H activation strategy for the construction of such systems has been developed. Starting from simple 1,3‐dienyl‐substituted heterocycles, a large range of polycyclic systems containing pyrrole, indole, furan and thiophene moieties can be synthesized in a single step.     

Development of Pesticides Based on Phytoalexins.: Part 1: Design and Synthesis of Flavanone Analogues via Bioisosterism Substitution

In order to search for novel fungicides with high activity, a series of 2‐heteroaryl‐4‐chromanones were designed and synthesized via bioisosterism substitution. The structures of all new compounds were confirmed by spectroscopic methods and microanalyses. Preliminary bioassays indicated that some compounds showed fungicidal activity against Rhizoctonia solani, Fusarium oxysporum, Physalospora piricola and Cercospora beticola.     

In situ fabrication of paclitaxel‐loaded core‐crosslinked micelles via thiol‐ene “click” chemistry for reduction‐responsive drug release

In this study, a facile method to fabricate reduction‐responsive core‐crosslinked micelles via in situ thiol‐ene “click” reaction was reported. A series of biodegradable poly(ether‐ester)s with multiple pendent mercapto groups were first synthesized by melt polycondensation of diol poly(ethylene glycol), 1,4‐butanediol, and mercaptosuccinic acid using scandium trifluoromethanesulfonate [Sc(OTf)₃] as the catalyst. Then paclitaxel (PTX)‐loaded core‐crosslinked (CCL) micelles were successfully prepared by in situ crosslinking hydrophobic polyester blocks in aqueous media via thiol‐ene “click” chemistry using 2,2′‐dithiodiethanol diacrylate as the crosslinker. These PTX‐loaded CCL micelles with disulfide bonds exhibited reduction‐responsive behaviors in the presence of dithiothreitol (DTT). The drug release profile of the PTX‐loaded CCL micelles revealed that only a small amount of loaded PTX was released slowly in phosphate buffer solution (PBS) without DTT, while quick release was observed in the presence of 10.0 mM DTT. Cell count kit (CCK‐8) assays revealed that the reduction‐sensitive PTX‐loaded CCL micelles showed high antitumor activity toward HeLa cells, which was significantly higher than that of reduction‐insensitive counterparts and free PTX. This kind of biodegradable and biocompatible CCL micelles could serve as a bioreducible nanocarrier for the controlled antitumor drug release. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 99–107     

Biaryl Synthesis by Ring‐Opening Friedel–Crafts Arylation of 1,4‐Epoxy‐1,4‐dihydronaphthalenes Catalyzed by Iron Trichloride

Biaryl and heterobiaryl compounds are important frameworks across a range of fields including pharmaceutical and functional material chemistries. We have accomplished the efficient synthesis of various naphthalene‐linked arenes and heteroarenes as biaryls and heterobiaryls by the FeCl₃‐catalyzed Friedel‐Crafts reactions accompanied by the ring‐opening of the 1,4‐epoxy moiety of 1,4‐epoxy‐1,4‐dihydronaphthalenes. Especially, it is noteworthy that 1‐silylated substrates were regioselectively transformed to the 3‐aryl‐1‐silylnaphthalenes and the double Friedel–Crafts reactions using thiophene derivatives could directly produce the corresponding bis‐naphthlated thiophene derivatives.