Polyelectrolyte complex formation between poly(diallyldimethyl-ammonium chloride) and copolymers of acrylamide and sodium-acrylate

 The interaction between oppositely charged polyelectrolytes, in this study poly(diallyldimethylammonium chloride) (PDADMAC) and copolymers of acrylamide and sodium-acrylate differing in their chain length and charge density parameter (ξ) was investigated in relation to the molar charge ratio of anionic to cationic charges (n ₋/n ₊). The molecular weights of the polyelectrolytes used were 2.9·10⁵g/mol for PDADMAC and for the polyacrylamide copolymers 14 ·10⁶g/mol as well as 5·10⁵g/mol obtained by ultrasonic degradation of the high molecular weight copolymers. The charge density parameters of the polyanions used (ξ ^PR ) varied between 0.14 and 0.64. Complexation between PDADMAC and high molecular weight polyanions leads mainly to macroscopic phase separation whereas the degraded polyanions and PDADMAC formed soluble complexes as well as stable dispersions, if charge excess was available. Precipitates and dispersions were characterized by several methods such as element analysis, thermogravimetry, pyrolysis-GC/MS, PEL titration, ζ-potential measurements, determination of turbidity, particle size measurements and determination of carbon content (TOC).  All precipitated complexes include about 20% water and are of 1:1 stoichiometry concerning ionic binding. Investigations of dispersions confirm 1:1 stoichiometry of complex particles stabilized by excess polyelectrolyte and soluble complexes. It was also found that the particle size can be varied via the charge density parameter of the polyanions used in the range of negative charge excess. Received: 21 June 2001 Accepted: 9 October 2001     

Adsorption of cationic polyelectrolyte onto a model carboxylic latex and the influence of adsorbed polycation on the charge regulation at the latex surface

 Adsorption of a well-characterized cationic polyacrylamide (CPAM) onto the surface of a model colloid (monodisperse polystyrene latex with carboxylic functional groups) was studied over a wide range of pH (4–9) and KCl concentration (c _s =10^-3–0.3 M). The surface charge density of the latex particles with and without adsorbed CPAM was also measured over the same range of electrolyte compositions. The adsorbed amount of CPAM increases with increase in c _s and pH. The polyelectrolyte adsorption alters substantially the surface charge density of the latex particles as compared to the polymer-free case. A large overcompensation of the surface charge by the adsorbed polyelectrolyte is established at high c _s and low pH. A qualitative explanation of the observed features is put forward. Received: 3 December 1996 Accepted: 20 January 1997     

Films based on chitosan polyelectrolyte complexes for skin drug delivery: Development and characterization

Novel chitosan based polyelectrolyte complexes (PEC) were developed and optimized in order to obtain films possessing the optimal functional properties (flexibility, resistance, water vapour transmission rate and bioadhesion) to be applied on skin. The development was based on the combination of chitosan and two polyacrylic acid (PAA) polymers with different crosslinkers and crosslinking densities. The interaction between the polymers was maximized controlling the pH, and by forming the films at a pH value close to the pK_a of the respective components as identified by potentiometric and turbidimetric titrations. The action of glycerol, PEG200, Hydrovance and trehalose upon the functional properties of the films was also evaluated. Glycerol was found to improve the film properties in terms of flexibility, resistance and water vapour transmission rate (WVTR) with a maximum effect at 30%. The application of a pressure sensitive adhesive (PSA) significantly improved bioadhesion with a negligible influence in the resistance and flexibility of the films.The optimized film, including adhesive, has shown very good properties for application in the skin and represents a very promising formulation for further incorporation of drugs for topical and transdermal administration.     

Preparation and characterization of different polyelectrolyte complexes and their application as flocculants

 Polyelectrolyte complexes (PEC) from poly(diallyl-dimethyl-ammoniumchloride) PDADMAC and two different polyanions, formed in aqueous solution, were characterized by different methods (zeta-potential, net content, turbidity) and applied as flocculants. The flocculation of clay was investigated by sedimentation measurement as well as by a dynamic method, using a Fibre Optical Flocculation Sensor. The results of both methods showed that the most important advantages of PEC were the high velocity of sedimentation and a very broad range of the optimum flocculation concentration. In spite of the differences in the complex-forming behavior of the two polyanions used, no significant differences between complexes of the same composition but different polyanions are obtained. In contrast, the ratio of anionic to cationic charges is of great importance for the mechanism of flocculation. Received: 30 May 1997 Accepted: 22 September 1997     

The selectivity in MEKC of pseudo-stationary phases based on polyelectrolyte complexes: I. composition of the complex

Polyelectrolyte–surfactant complexes (PSC) of polycarboxylic acids with alkyl-trimethylammonium salts look very promising as a new type of pseudo-stationary phase in micellar electrokinetic chromatography. PSC produce an intramolecular micellar phase, and the morphology of the micelles is significantly different from that of the corresponding typical surfactant micelles. Pseudo-stationary phases based on PSC have unique selectivity. In this paper, the effect of the composition () of the PSC of polyacrylic acid (PAA) M_W 130,000 with dodecyltrimethylammonium bromide (DTAB) and of the PSC of PAA M_W 450,000 with DTAB on the separation of DNS–amino acids and phenol derivatives in these systems was investigated. Relative retention and relative selectivity were used to describe the electrophoretic behavior of the amino acids and phenol derivatives. The main advantage of PSC pseudo-phases is that the nature and the structure of micelle-like units, and hence the selectivity of electrophoretic separation, could easily be modified by changing the composition of the complex.     

Theoretical and experimental comparison of the colloid stability of two polystyrene latexes with different sign and value of the surface charge

 The purpose of this paper is to apply the classical DLVO theory to explain the colloid stability of two model colloids with similar size and different sign and value of the surface charge. For this comparison the hydrodynamic interaction and the presence of hydration forces (extended DLVO theory) have been taken into account. The experimental stability factor and the experimental doublet rate constant in diffusion conditions were compared with those evaluated theoretically. The mathematical treatment permits an easy evaluation and interpretation of the different adjustable parameters such as the Hamaker constant, diffuse layer potential and the hydration layer thickness. The theoretical and experimental comparison shows that the “extended DLVO theory” only permits to explain the stability curves Log[W]/Log[KBr] in a semiquantitative way by using, for the evaluation of the total interaction potential V _T, a value of the Hamaker constant (A) similar to the classical theoretical one for polystyrene particles dispersed in water. In the case of the anionic latex, it was necessary to admit the presence of a hydration layer of a thickness similar to the radius of the hydrated/dehydrated counterion. On the other hand, by using the experimental doublet rate constant in diffusion conditions, we obtain a lower value of the Hamaker constant (A), but within the range of the A values usually found in previous studies. Received: 8 September 1997 Accepted: 8 January 1998     

Scattering experiments on the structure of concentrated dispersions

 In this work the Couette cell is compared with a more recently constructed disk shear cell. There are distinct advantages of the disk over the Couette cell, in particular, when it comes to the determination of the intensity along certain Bragg rods. Received: 12 December 2000 Accepted: 31 January 2001     

Orbital-band interactions and the reactivity of molecules on oxide surfaces: from explanations to predictions

 The surface chemistry of oxides is relevant for many technological applications: catalysis, photoelectrolysis, electronic-device fabrication, prevention of corrosion, sensor development, etc. This article reviews recent theoretical works that deal with the surface chemistry of oxides. The account begins with a discussion of results for the adsorption of CO and NO on oxides, systems which have been extensively studied in the literature and constitute an ideal benchmark for testing the quality of different levels of theory. Then, systematic studies concerned with the behavior of adsorbied alkali metals and sulfur-containing molecules are presented. Finally, a correlation between the electronic and chemical properties of mixed-metal oxides is analyzed and basic principles for designing chemically active oxides are introduced. Advances in theoretical methods and computer capabilities have made possible a fundamental understanding of many phenomena associated with the chemistry of molecules on oxide surfaces. Still many problems in this area remain as a challenge, and the approximate nature of most theoretical methods makes necessary a close coupling between theory and experiment. Following this multidisciplinary approach, the importance of band-orbital interactions for the reactivity of oxide surfaces has become clear. Simple models based on band-orbital mixing can explain trends found for the interaction of many adsorbates with oxide surfaces. These simple models provide a conceptual framework for modifying or controlling the chemical activity of pure oxides and for engineering mixed-metal oxides. In this respect, theoretical calculations can be very useful for predicting the best ways for enhancing the reactivity of oxide systems and reducing the waste of time, energy and materials characteristic of an empirical design. Received: 21 June 2001 / Accepted: 8 October 2001 / Published online: 1 February 2002     

Contribution of flow field flow fractionation with on line static and dynamic light scattering to the study of hydrosoluble polyelectrolyte complexes

Water soluble polyelectrolyte complexes (PECs) formed between polyaspartate (anionic polymer) and poly(trimethylammonium propyl methacrylamide chloride) (cationic polymer) were studied by flow field flow fractionation with on-line coupling multi-angle laser light scattering-quasi elastic light scattering-differential refractive index determination (F4/MALLS/QELS/DRI). The separation technique permits to characterize polydisperse PECs. The molar mass of the polycation (PC) influences the stiffness of the PECs and the proportion between single PECs (i.e. nPA/1PC) and multiple PECs (i.e. nPA/n’PC). High ionic strength with NaCl (>0.1 M) tends to break the multiple PECs while CaCl₂ destroys PECs and leads to the formation of complexes polyaspartate/Ca²⁺. The studied PECs can be used as inhibitors to the calcite formation in the drilling fluids.     

The effect of nanoparticle growth on rheological properties of silica and silicate dispersions

CdS and ZnS nanoparticles were prepared in the solid–liquid interfacial adsorption layer as a nanophase reactor. The substrates were hydrophilic and hydrophobic aerosils and hydrophilic layer silicates dispersed in ethanol–cyclohexane mixtures. The growth of particles at various surface concentration of precursor ions was monitored by absorption spectroscopy, band-gap-energy measurements and particle diameter measurements. Also, the rheological properties of nanoparticle–support composites in organic and aqueous dispersions were measured. The energy of separation between the nanoparticles depended on the particle diameter. The intercalation of nanoparticles in the layered silicates yielded a nanostructured two-phase system. The presence of semiconductive subcolloids was proven by transmission electron microscopy measurements, which offer an excellent possibility for the determination of the particle size distribution. Received: 20 July 1999/Accepted in revised form: 22 September 1999     

Complexes of polyelectrolyte hydrogels with organic dyes: Effect of charge density on the complex stability and intragel dye aggregation

The swelling behavior of polyelectrolyte gels based on poly(diallyldimethylammonium chloride) (copolymers of diallyldimethylammonium chloride and acrylamide with the variable composition) and poly(methacrylic acid, sodium salt) in the presence of organic water soluble dyes (alizarin, naphthol blue black, rhodamine) was studied. The collapse of the polyelectrolyte gels in the presence of oppositely charged dyes together with the effective absorption of dyes was observed. The shrinking degree and the dye absorption by the gel depend on the charges of the polymer network and the dye, and also on the dye concentration. Stability of the gel–dye complexes in a salt solution of NaCl and Al₂(SO₄)₃ was studied. It was shown that the complex stability in the salt solution depends on the charge density of the polymer chains forming the gel. The increase of charge density of polymer generally leads to the enhancement of the complex stability. For the systems with the fraction of charged poly(diallyldimethylammonium chloride) monomer units above 0.5 the release of alizarin to the external solution of Al₂(SO₄)₃ reservoir is practically completely suppressed. The obtained results show that oppositely charged dyes are generally from stable complexes with polyelectrolyte gels. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1209–1217, 1999     

Ultraviolet-curable epoxy acrylate dispersions: effect of urethane acrylate anionomers on stabilizing and film properties

 Epoxy acrylate dispersions stabilized using urethane acrylate anionomers were prepared for an application of ultraviolet (UV) curing. By observing the optical microscopy and colloidal stability for the epoxy acrylate dispersions, it was confirmed that the urethane acrylate anionomers incorporated have an interfacial activity in the interface between the epoxy acrylate oil and the water/ ethanol mixture (80/20, w/w). This was possible by the structurally designed urethane acrylate anionomers, containing a hydrophobic soft segment and two hydrophilic ionic sites in their molecules. In addition, when ultraviolet (UV)-cured, the urethane acrylate anionomers agglomerated to form the rubber domains in the epoxy acrylate film, which were induced by the ionic interaction. Consequently, this agglomerated rubber domains improved the final film properties. Received: 4 April 1998 Accepted: 1 July 1998     

The effect of a polymeric additive on the evaporation of organic aerocolloidal droplets

 The evaporation of single triethyl phosphate (TEP) micro-droplets containing a high molecular weight polymer, poly(methyl methacrylate) (PMAA), was inves-tigated using an electrodynamic trap and light scattering measurements to explore the suppression of evaporation by the additive. Pure-component evaporation rates were measured to determine the vapor pressure over a range of temperatures, and the polymer was found to significantly decrease the evaporation rate. A numerical solution of the problem of simultaneous solvent evaporation and polymer diffusion within the droplet indicated a rapid build-up of PMMA at the surface of the drop, but vapor/liquid thermodynamic considerations alone do not account for the observed reduction in the evaporation rate for the droplets containing PMMA. After significant evaporation of TEP occurred, the ultra-low evaporation rate was measured using changes in the Raman spectra associated with morphology-dependent resonances. The evaporation in this regime appears to be controlled by the rate of solvent molecules diffusing through the polymer matrix. Received: 17 June 1997 Accepted: 24 October 1997     

Ternary inclusion complexes of cyclodextrins with spin-labeled indoles and hydrocarbons. The formation of 2: 1: 2 complexes and partial dissociation of spin-labeled guests in the presence of a hydrocarbon liquid phase

The interaction of ternary complexes γ-or β-cyclodextrin (CD)-spin-labeled indole (pyrrolidine (1) or piperidine (2) derivative)-hydrocarbon (benzene or cyclohexane) with the liquid phase of these hydrocarbons gives rise to a new type of complexes (s) the ESR spectra of which are indicative of a much lower rotational mobility and its weaker temperature dependence for the spin-labeled guests compared with the initial ternary complexes (w). The formation of s-complexes is accompanied by a decrease in the proportion of the initial w-complexes. This gives rise to several isosbestic points in the ESR spectra, which indicates the formation of s-complexes from w-complexes. The rotational diffusion coefficient of 2 in s-complexes decreases 6–10-fold with respect to its value for w-complexes and the libration amplitude of 1 in the s-complexes decreases to 5–6° at 295 K. Transition between the two types of complexes occurs with characteristic times of 10³–10⁵ s and is reversible: upon the removal of the hydrocarbon, the proportion of the strongly immobilized s-signal decreases, while upon its addition, it increases again. These results indicate that the strongly immobilized ESR signals belong to 2: 1: 2 complexes, which are formed upon the insertion of the second hydrocarbon molecule into the initial ternary 2: 1: 1 w-complexes. According to PM3 quantum-chemical calculations, 2: 1: 2 complexes are stable in energy and the geometry of hydrocarbon arrangement depends on the structure of the spin-labeled guest. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2094–2100, December, 2006.     

Metals in biology: Electronic structure,properties and charge transfer for copper complexes of glyoxal and dithiene

Summary In an attempt to study the role of metals in biologyab initio SCF calculations have been performed on a model complex simulating the binding between metals and biological materials. There is a certain distinction between the copper complexes compared to the other transition metals and in many cases the copper complexes are more similar to the Li and Be complexes than to other transition metal complexes. One special feature of the copper complexes is their strong ability for an easy transfer between the Cu(I) and Cu(II) states, allowing for a very flexible charge transfer with small energies required for the redox processes. These processes have been described in terms of orbital energies and Mulliken populations.Dedicated to Professor Inga Fischer-Hjalmars on the occasion of her 75th birthday     

Novel drug delivery systems based on the complexes of block ionomers and surfactants of opposite charge

In this paper we have evaluated a novel family of polymer-surfactant complexes formed between block ionomers and oppositely charged surfactants. Complexes between cationic copolymer poly(ethylene oxide)-g-polyethyleneimine (PEO-g-PEI) and sodium salt of oleic acid, natural nontoxic surfactant, are prepared and characterized. These systems self-assemble in aqueous solutions into particles with average size of 50–60 nm, which can solubilize hydrophobic dyes (Yellow OB) and drug molecules (paclitaxel). The use of the biologically active surfactants as components of block ionomer complexes is demonstrated for the complexes from PEO-g-PEI and all-trans-retinoic acid. Binding of relatively soluble drugs with block ionomers is illustrated using PEO-b-poly(sodium methacrylate) and doxorubicin. Overall these studies suggest that block ionomer complexes can be used to prepare a variety of soluble and stable formulations of biologically active compounds, and have potential application as drug delivery systems     

The performance of the rapid estimation of basis set error and correlation energy from partial charges method on new molecules of the G3/99 test set

Experimental enthalpies of formation have been approximated using single-point Hartree–Fock (HF)–self-consistent-field (SCF) total energies plus the rapid estimation of basis set error and correlation energy from partial charges (REBECEP) energy corrections. The energy corrections are calculated from the HF–SCF partial atomic charges and optimized atomic energy parameters. The performance of the method was tested on 51 closed-shell neutral molecules (50 molecules from the G3/99 thermochemistry database plus urea, composed of H, C, N, O, and F atoms). The predictive force of the method is demonstrated, because these larger molecules were not used for the optimization of the atomic parameters. We used the earlier RECEP-3 [HF/6-311+G(2d,p)] and REBECEP [HF/6-31G(d)] atomic parameter sets obtained from the G2/97 thermochemistry database (containing small molecules) together with natural population analysis and Mulliken partial charges. The best results were obtained using the natural population analysis charges, although the Mulliken charges also provide useful results. The root-mean-square deviations from the experimental enthalpies of formation for the selected 51 molecules are 1.15, 3.96, and 2.92 kcal/mol for Gaussian-3, B3LYP/6-11+G(3df,2p), and REBECEP (natural population analysis) enthalpies of formation, respectively (the corresponding average absolute deviations are 0.94, 7.09, and 2.27 kcal/mol, respectively). The REBECEP method performs considerably better for the 51 test molecules with a moderate 6-31G(d) basis set than the B3LYP method with a large 6-311+G(3df,2p) basis set. Received: 10 March 2001 / Accepted: 5 July 2001 / Published online: 11 October 2001     

New Colorimetric Methods for the Determination of Indapamide and its Formulations

 Two simple and sensitive methods for the determination of indapamide in pure and in dosage forms are developed. These methods are based on the oxidation of indapamide with iron(III) in acidic medium. The liberated iron(II) reacts with 1,10-phenanthroline (Method A) and the ferroin complex is colorimetrically measured at λ_max 509 nm against reagent blank. Method B is based on the reduction of Fe(III) by the drug. Iron(II) forms a colored complex (λ_max 522 nm) with 2,2′-bipyridyl. Optimization of the experimental conditions is described. Beer’s law is obeyed in the concentration range 1.0–12 μg ml⁻¹ and 4.0–18 μ g ml⁻¹ for A and B, respectively. The apparent molar absorptivity and Sandell sensitivity for method A is 3 × 10⁴ L mol⁻¹ cm⁻¹ and 0.0188 μ g cm⁻², while for method B is 2.3 × 10⁴ L mol⁻¹ cm⁻¹ and 0.0159 μg cm⁻². The detection and quantification limits are calculated. The developed methods are applied successfully for the determination of indapamide in pure and in tablet form without interference from common excepients. Received November 10, 2000. Revision April 6, 2001.     

Synthesis and characterization of diorganotin(IV) complexes of tridentate Schiff bases: crystal structure of [N-(3-hydroxypyridine-2-yl)-5-chlorosalicylideneiminato]dimethyltin(IV)

Some five-coordinated dimethyltin(IV) complexes of the type Me₂SnL (where L is the anion of a bifunctional tridentate Schiff base) were synthesized. These Schiff bases are N-(3-hydroxypyridine-2-yl)-3-methoxysalicylideneimine, HOC₆H₃OCH₃CH=NC₅H₃NOH (1), N-(3-hydroxypyridine-2-yl)-3-ethoxysalicylideneimine, HOC₆H₃OC₂H₅CH=NC₅H₃NOH (2), N-(3-hydroxypyridine-2-yl)-5-chlorosalicylideneimine, HOC₆H₃ClCH=NC₅H₃NOH (3), and N-(3-hydroxypyridine-2-yl)-3-methoxy-5-bromosalicylideneimine, HOC₆H₂OCH₃BrCH=NC₅H₃NOH (4). Dimethyltin(IV) complex of 3 (3a) was characterized by single crystal X-ray diffraction method and a coordination geometry that is nearly halfway between trigonal–bipyramidal and square pyramidal arrangement was found. Dimethyltin complexes of (1), (2), and (4) were also prepared and characterized by the comparison of their elemental analysis and ¹H-NMR-, IR-, UV- and mass spectral data with those of (3a). For example, in the ¹H-NMR spectra, the ²J(¹¹⁹Sn-¹H) in the Sn-CH₃ moiety have values between 80 Hz and 90 Hz, typical of five-coordinated tin species. By using these values in Lockart’s Equations, H₃C–Sn–CH₃ angles in the complexes were estimated to lie between 130° and 145°. X-ray diffraction value for 3a, confirms this estimate within 3.4% relative deviation (129.7° exp. Vs. 134.9° estimate).