中厚度圆浮板自由振动的一个解析解

本文提出了常水深环境下中厚度圆浮板自由振动的一个解析解.分析中考虑了板横向剪切变形的影响和横截面转动惯性效应,利用空气中中厚度圆板的振型叠加和势流理论,导得了浮板系统频率方程的解析式.由此可看出Y.Tanaka得到的圆形薄浮板的解是本文的特例.最后数值计算还给出了水深和钢缆刚度与频率的关系曲线.并指出了h/a在什么范围可以略去剪切变形和转动惯量的影响.     

A variational solution of coupled vibration for moderately thick floating plate seated on the sea floor with variable water depth

Based on Reissner's plate theory, a localized variational principle for the coupled vibrations of moderately thick floating plates seated on the sea floor with variable water depth is presented in this paper. It will be a powerful tool to formulate various approximate methods of moderately thick floating plates. By means of this variational principle a formula for calculating the natural frequencies of moderately thick floating plates is also obtained. A numerical example shows that high accuracy and computational time saving may be achieved in calculation.     

变水深环境下中厚度浮板耦振问题的一个变分解

本文从Reissner 板的理论出发,提出并论证了变水深环境下中厚度浮板耦振问题的一个局部变分原理,它是建立中厚度浮板各种近似分析方法的一个有力工具,借助这个变分原理,文中还导得了一个计算中厚度浮板固有频率的一个变分式,数值算例表明本文方法具有精度高和省机时的优点。     

The first-order approximation of non-Kirchhoff-Love theory for elastic circular plate with fixed boundary under uniform surface loading (III)—Numerical results

Based upon the differential equations and their related boundary conditions given in the previous papers^{[1, 2]}, using a global interpolation method, this paper presents a numerical solution to the axisymmetric bending problem of non-Kirchhoff-Love theory for circular plate with fixed boundary under uniform surface loading. All the numerical results obtained in this paper are compared with that of Kirchhoff-Love classical theory^[3] and E. Reissner's modified theory^[4].     

A study on caustic method in cracked plate under symmetric bending

Based on Chun-Tu Liu's result for Reissner's plate, an equation of caustics in cracked plate under symmetric bending was obtained. The shape and the distribution of light intensity of the caustic curve were discussed in detail. The relation between the stress intensity factor (SIF) and the size of the caustic curve was found by numerical method, and a simple and accurate experimental method for evaluating SIF in plate under bending was proposed.     

Reissner板弯曲的复变函数分析方法

本文建立了Reissner板弯曲问题的复变函数分析方法,它可以有效地用于分析含一般孔洞板弯曲的应力集中问题。作为应用,文中还给出了一些计算实例。     

??????????????????????????????

基于形状记忆合金Brinson一维热力学本构关系和von K\'{a}rm\'{a}n几何非线性薄板理论,研究了径向嵌入SMA丝复合材料加热圆板在横向均布 机械载荷作用下的弯曲响应, 获得了周边不可移简支和夹紧圆板的中心最大挠度与升温之间的关系曲线. 结果表明,形状 记忆合金丝在从马氏体向奥氏体的逆相变过程中所产生的相变回复力对板的弯曲变形具有明 显的调整作用. 通过嵌入SMA纤维丝和施加升温载荷可以主动而有效地调节受机 械载荷作用圆板的弯曲变形.     

THE FIRST-ORDER APPROXIMATION OF NON-KIRCHHOFF-LOVE THEORY FOR ELASTIC CIRCULAR PLATE WITH FIXED BOUNDARY UNDER UNIFORM SURFACE LOADING (Ⅲ)──NUMERICAL RESULTS

1ShanghaiUniversity;ShanghaiInstituteofAppliedMathematicsandMechanics,Shanghai200072P.R.ChinaIX.NondimensionalEquationsandBoundaryConditionsoftheFirstOrderApproximateTheoryFortheconvenienceofnumericalcomputation,webeginbytransformingthedifferentialequatio…     

Series solutions for a transversely loaded and completely clamped thick rectangular plate based on the three-dimensional theory of elasticity

Summary The bending of a thick rectangular plate with all the edges completely clamped is analyzed by the three-dimensional theory of elasticity. A partially distributed uniform load over the top face is dealt within the analysis. The boundary conditions of the completely clamped edges are prescribed by three-dimensional, exact conditions that three displacement components vanish at the faces. The stress distributions at the edges are minutely examined by making the best use of advantages of the exact analysis. The stress distributions for the case of a fully distributed uniform load are compared with those obtained by Reissner's theory. The values of deflections and internal forces for various thickness-length ratios are also presented. Accepted for publication 5 June 1997     

ANALYTICAL RELATIONS BETWEEN EIGENVALUES OF CIRCULAR PLATE BASED ON VARIOUS PLATE THEORIES

Based on the mathematical similarity of the axisymmetric eigenvalue problems of a circular plate between the classical plate theory(CPT), the first-order shear deformation plate theory(FPT) and the Reddy's third-order shear deformation plate theory (RPT), analytical relations between the eigenvalues of circular plate based on various plate theories are investigated. In the present paper, the eigenvalue problem is transformed to solve an algebra equation. Analytical relationships that are expressed explicitly between various theories are presented. Therefore, from these relationships one can easily obtain the exact RPT and FPT solutions of critical buckling load and natural frequency for a circular plate with CPT solutions. The relationships are useful for engineering application, and can be used to check the validity, convergence and accuracy of numerical results for the eigenvalue problem of plates.     

焊接残余应力平板多个共面表面裂纹的应力强度因子

采用线弹簧模型求解含焊接残余应力平板多个共面任意分布表面裂纹的应力强度因子.利用边裂纹权函数给出了裂纹表面上沿厚度非线性分布的残余应力向线性分布的转化公式.基于Reissner板理论和连续分布位错思想,将含多个共面任意分布表面裂纹的无限平板问题归结为一组Cauchy型奇异积分方程,并采用Gauss-Chebyshev方法获得了奇异积分方程的数值解.以三共面表面裂纹为例,计算了表面裂纹的应力强度因子,并讨论了裂纹间距、裂纹几何形状等因素对应力强度因子的影响.     

Thermal buckling of functionally graded circular plates based on higher order shear deformation plate theory

In this research, thermal buckling of circular plates compose of functionally graded material (FGM) is considered. Equilibrium and stability equations of a FGM circular plate under thermal loads are derived, based on the higher order shear deformation plate theory (3rd order plate theory). Assuming that the material properties vary as a power form of the thickness coordinate variable z and using the variational method, the system of fundamental partial differential equations is established. A buckling analysis of a functionally graded circular plate (FGCP) under various types of thermal loads is carried out and the result are given in closed-form solutions. The results are compared with the critical buckling temperature obtained for FGCP based on first order (1st order plate theory) and classical plate theory (0 order plate theory) given in the literature. The study concludes that higher order shear deformation theory accurately predicts the behavior of FGCP, whereas the first order and classical plate theory overestimates buckling temperature.     

THERMAL BUCKLING ANALYSIS OF CIRCULAR PLATE EMBEDDED IN AN INFINITE ELASTIC PLATE 1)

分析了嵌入无限大弹性板中的圆板在变温时的热屈曲问题。由于圆板的热膨胀系数与无限大弹性板的热膨胀系数不同,温度变化时圆板中会产生压应力。当压应力达到其临界值时,圆板会发生热屈曲。首先,基于弹性力学平面应力问题的基本理论,得到圆板和无限大弹性板的应力和位移;然后建立圆板热屈曲的控制微分方程,求得临界屈曲温度的解析解和数值解,着重讨论圆板和无限大弹性板的材料物性参数的关系对圆板临界屈曲温度的影响。     

Pointwise errors in the classical and in Reissner's linear theory of plates,especially for concentrated loads

An infinite, horizontal, elastically isotropic plate is subjected to a distributed vertical, axisymmetric load, part of which is a body force and part of which is a surface traction. The resulting 3-dimensional stresses and displacements are found with the aid of Love's stress function and Hankel transforms. From these, the sum of the principal stress couples, the average rotation of radial fibers, and the average vertical deflection are computed and compared against the predictions of classical and Reissner's shear-deformation plate theory. Remarkably, the elasticity and plate theory predictions for the stress couples and the rotation agree if Poisson's ratio is zero. In general, for smoothly varying loads, the predictions of Reissner's theory are closer than those of classical theory to the predictions of elasticity theory. However, if a part of the load is (nearly) concentrated, then it is shown that the singularities in the sum of the principal stress couples and in the rotation predicted by Reissner's theory are too strong (because his theory accounts for normal stress effects based on smoothly varying loads). Moreover, if the concentrated part of the external load is a uniformly distributed line load through the thickness, then classical theory predicts the correct singularity in these variables, although with an erroneous strength. On the other hand, Reissner's theory correctly predicts the logarithmic singularity in the average vertical deflection (for any type of concentrated load), although with an erroneous strength.     

Active sloshing control in a smart flexible cylindrical floating roof tank

An exact three dimensional fully-coupled hydro-elastic analysis for transient liquid sloshing in a partially-filled vertically-standing flexible circular cylindrical shell container fitted with a freely floating smart piezo-sandwich thin elastic circular plate is presented. The problem formulation is based on the linear water wave theory, the classical (Kirchhoff/Sanders) thin plate and shell models, Maxwell's equations of electrodynamics, Stokes’ transformation, and eigen-function expansions in cylindrical coordinates. The control action is achieved by combined volume displacement and volume velocity feedbacks (VDF, VVF) implemented in a second order active damping (AD) compensator via two competent evolutionary heuristic optimization techniques that systematically tune the controller gain parameters while constraining the floating panel displacement and control voltage. The uncontrolled and controlled transient responses of the coupled hydro-elastic system under various external disturbances (i.e., a harmonic base excitation, a real seismic event, a severe launch vehicle liftoff event, and a distributed impulsive transverse load on the floating panel) are calculated by means of Durbin's numerical inverse Laplace transform scheme. Moreover, the free vibration characteristics of the coupled fluid/structure interaction (FSI) system are briefly studied. The superior performance of the proposed active floating roof control configuration in effective suppression of the key hydro-elastic parameters (panel displacement, and shell displacements/stresses) is demonstrated. It is also found that, in the current FSI control problem, the Multi-objective Particle Swarm Optimization (MOPSO)-based ADC outperforms the Non-dominated Sorting Genetic Algorithm (NSGA-II)-based method, in terms of convergence rate and computational effort. Limiting cases are examined and the precision of results is verified by comparisons with the existing data as well as with the results produced by a commercial finite element package.     

考虑剪切变形的各向同性,正交各向异性矩形板的屈曲和后屈曲

本文讨论考虑横向剪切变形的各向同性、正交各向异性矩形板的屈曲和后屈曲性态。应用Reissner理论,采用文[1]提供的摄动方法,给出了完善和非完善各向同性、正交各向异性矩形板的后屈曲平衡路径,并与薄板理论结果作了比较。     

样条边界元法分析圆形基础板非线性非光滑接触

本文用样条边界元法分析轴对称圆形基础板的非线性非光滑接触。除事先给出外力与地基表面位移的对应关系外,地基的模型、板的厚薄(Reissner/Kirchhoff型)和外荷载沿径向的分布均可是任意的。文中将地基反力看作板的外载,对变量沿径向采用不等距祥条插值,并用无地基效应的板基本解。算例表明本文方法只要用少量自由度,便可得到令人满意的结果。     

BOUNDARY INTEGRAL EQUATIONS FOR BENDING PROBLEM OF REISSNER'S PLATES ONTWO-PARAMETER FOUNDATION

I.IntroductionThickplatesonelastict'oundationarewidelyusedinengineering,suchasthebottomplatesofoffShorestructures,surfaceplatesonrunwayofairportsandfoundationsofhigh-risebuildingsandthelike.Itisextremelydifficulttoobtainanalyticalsolutiontarathickplatewithcomplicatedshapeorcomplicatedboundaryconditiononelasticfoundation.Inrecentyears,theboundaryelementmethod(BEM)hasbeensuccessl'ullyusedtoanalyzethebendingproblemofplatesoneverykindofelasticfoundation(Ref.[l,2.3]).Butthereareonlyfewreferences…     

Winkler地基上变厚度圆板的轴对称弯曲

本文提出了Winkler地基上变厚度圆板轴对称弯曲的传递矩阵算法。首先,根据贝塞尔函数理论获得了等厚度圆板和环板单元在任意荷载作用下轴对称弯曲的解析解,这些解均由通解和特解两部分组成。基于这些解析解,导出了等厚度圆板和环板单元的传递矩阵。然后沿径向将变厚度圆板划分成一个等厚度圆板单元和一系列等厚度环板单元,应用传递矩阵算法原理获得了变厚度圆板的整体传递矩阵。引入圆板的边界条件,给出了该板每条节线上的挠度、径向转角、径向弯矩和径向剪力。最后,讨论了受均布荷载作用的简支线性变厚度圆板的弯曲,将本文数值解与解析解进行比较,证实了本文方法的有效性,并简要地讨论了地基参数对板挠度和径向弯矩的影响。     

Boundary integral equations for bending problem of Reissener's plates on two-parameter foundation

Two fundamental solutions for bending problem of Reissner's plates on two-parameter foundation are derived by means of Fourier integral transformation of generalized function in this paper. On the basis of virtual work principles, three boundar integral equations which fit for arbitrary shapes, lods and boundary conditions of thick plates are presented according to Hu Haichang's theory about Reissner's plates. It provides the fundamental theories for the application of BEM. A numerical example is given for clamped, simply supported and free boundary conditions. The results obtained are satisfactory as compared with the analytical methods. Project supported by the P.H.D. Foundation of National Education Committee of China