Ultra-narrow-band tunable laserline notch filter

We report on an angularly tunable laserline notch filter from 760 to 785 nm with optical density of 5.7, 3 dB bandwidth of 9 cm⁻¹ (0.55 nm) and greater than 80% transmission. The notch filter is a single element composed of six bonded slanted reflective holographic gratings in glass.     

Monolithically integrated 64‐channel silicon hybrid demultiplexer enabling simultaneous wavelength‐ and mode‐division‐multiplexing

A compact 64‐channel hybrid demultiplexer based on silicon‐on‐insulator nanowires is proposed and demonstrated experimentally to enable wavelength‐division‐multiplexing and mode‐division‐multiplexing simultaneously in order to realize an ultra‐large capacity on‐chip optical‐interconnect link. The present hybrid demultiplexer consists of a 4‐channel mode multiplexer constructed with cascaded asymmetrical directional‐couplers and two bi‐directional 17 × 17 arrayed‐waveguide gratings (AWGs) with 16 channels. Here each bi‐directional AWG is equivalent as two identical 1 × 16 AWGs. The measured excess loss and the crosstalk for the monolithically integrated 64‐channel hybrid demultiplexer are about ‐5 dB and ‐14 dB, respectively. Better performance can be achieved by minimizing the imperfections (particularly in AWGs) during the fabrication processes.

     

Liquid crystal enabled multi-channel power equalizer and stabilizer

Automatic power equalization and stabilization of a liquid crystal enabled channel-selectable optical demultiplexer is demonstrated. The variation among output signals from different channels was reduced from ∼10 dB to 0.15 dB with feedback control. The minimum ripple level of a single channel is ∼0.05 dB. As a variable optical attenuator (VOA), the attenuation range of the device is ∼12.6 dB.     

Calculation of shear angles in holographic gratings recorded in bleached silver-halide emulsions

Shearing phenomena in holographic gratings formed in bleached silver-halide emulsions due to chemical processing are evaluated. These effects are introduced because of the inability of emulsion-thickness changes to explain the anomalous detuning of the peak diffraction efficiency from the expected Bragg condition. Experimental results obtained with transmission and reflection gratings are presented and discussed considering shearing effects, and the values of the shear angles calculated from the Bragg-angle deviation measurements are also provided. In order to separate the shearing phenomenon and the shrinkage of the emulsion layer, a rehalogenating bleach without fixing is used because this bleach bath introduces a minimal change in the thickness of the emulsion. The influences of exposure, spatial frequency and slant angle on shear angles are briefly analyzed and discussed.     

Diffraction from angular multiplexing slanted volume hologram gratings

The diffraction characteristics of the volume holographic gratings made by multiexposures with angular multiplexing during its construction is investigated. Because of the reflection by the interface between the emulsion and the substrate or the air there is an extra unslanted periodic structure inside a slanted grating, it will affect properties of the slanted volume holographic gratings. When the angle between the surface of the substrate and the grating plane of the slanted grating is less than a certain value, an extra peak accompanying the main peak will appear in the diffraction spectrum. But, when the angle is larger than the certain value, one designed and expected main peak will disappeared while the extra peak is kept and observed. This phenomenon limits the capacity of the volume hologram for the application in wavelength-division multiplexing (WDM).     

Total internal reflection diffraction grating in conical mounting

The main conditions and parameters for obtaining surface relief total internal reflection diffraction gratings in conical mounting are presented. Calculated and experimental investigations reveal that there are ranges of grating periods, incidence angles, diffraction angles and gratings depths for which such gratings could be obtained, both for TE and TM polarizations. With optimized grating parameters the diffraction efficiency of the total internal reflection diffraction gratings can be greater than 90%.     

两点法设计平场型EDG波分复用器件

利用两点法(two stigmatic points method)对平场型蚀刻衍射光栅(EDG)波分复用器件进行了优化设计.与传统EDG相比,该方法以较小的性能损失为代价,极大简化了制作工艺.通过标量波动衍射理论对16通道的该型器件进行了数值模拟,结果表明:在用光探测器陈列接收的情况下,额外的功率损耗约为1dB,信道间的不均匀性小于0.3dB,串绕小于-30dB.     

Permanent narrow-band reflection holograms for infrared light recorded in LiNbO3:Ti:Cu channel waveguides

Permanent refractive-index gratings are generated by thermal fixing of holograms in photorefractive lithium niobate channel waveguides. The guides are fabricated by successive indiffusion of titanium stripes and thin layers of copper. After high-temperature recording with green light, refractive-index modulations exceeding Δn=8×10^-5 for light of the telecommunication wavelength 1550 nm appear without the need of any development process of the written holograms. The gratings are stable in the dark and no compensation mechanism via dark conductivity is observed. Thus this method may be well suited for long-time applications in holography and integrated optics. Received: 2 October 2000 / Revised version: 25 January 2001 / Published online: 22 March 2001     

Inscription of holographic gratings using circularly polarized light: influence of the optical set-up on the birefringence and surface relief grating properties

The polarization properties of the optical set-up used for holographic recording of diffraction gratings on azopolymer thin films are analyzed. The state of polarization of circularly polarized light is fully analyzed after reflection on a mirror at various incidences (Lloyd-mirror set-up). The Stokes analysis is performed using a photopolarimeter and the phase shift, the ellipticity and the azimuth orientation are compared with those calculated from Fresnel formulae. At large angles of incidence, an initially right circularly polarized (RCP) beam becomes elliptically polarized with an azimuth of nearly +45°. From these results, holographic diffraction gratings are recorded on an azobenzene-containing polymer thin film using (i) co- and contra-circularly polarized beams and (ii) a right circularly polarized beam interfering with a +45° linearly polarized light beam. Using Jones-matrix formalism, the polarization states of the diffracted orders from the birefringence (Δn) and the surface-relief (2Δd) gratings are derived and compared with experimental measurements. Finally, the induced local birefringences and surface-relief amplitudes are discussed in connection with atomic force microscopy measurements. The diffraction efficiencies obtained under the (+45°+RCP) and (LCP + RCP) (where LCP = left circularly polarized) configurations are thus compared and discussed. Received: 5 October 2001 / Revised version: 26 November 2001 / Published online: 17 January 2002     

Detection of higher nonlinear harmonics of volume photorefractive gratings in reflection geometry

A comprehensive technique has been used to detect diffraction from the second and the third nonlinear spatial harmonic components, along with the fundamental harmonic of volume photorefractive gratings recorded in a channel waveguide in a LiNbO₃ substrate. For the first time to our knowledge, efficient diffraction from the higher spatial harmonic components of a photorefractive grating has been detected in reflection geometry. The dependence of a Bragg wavelength shift on the order of nonlinearity is also reported.     

Chirped fibre Bragg grating based multiplexer and demultiplexer for DWDM applications

A multiplexer/demultiplexer for 100 GHz channel spacing based on chirped fibre Bragg gratings with different bandwidths and optical circulators is presented. The spectral characteristics, specifications and operation of these passive devices are described, showing its potential use in dense wavelength division multiplexing (DWDM) applications.     

Phase Controlled Laser Interference for Tunable Phase Gratings in Dye-Doped Nematic Liquid Crystals

A phase controlled multi-beam interference is applied to excite the doped liquid crystals. Control of the phase difference between the exciting beams allows the external control of the interference pattern inside the liquid crystal. The dynamic variation of the grating is made possible with a time-dependent phase change to derive the nonlinear refractive index as well as the responding speed of the material. The induced grating structure is numerically modelled with reorientational phase gratings in the liquid crystal, and the diffraction dynamics is found to be in good agreement between theoretical and experimental results.     

Photofabrication of periodic microstructures in azodye-doped polymers by interference of laser beams

Volume holographic gratings and two-dimensional periodic microstructures in azodye-doped polymethylmethacrylate were fabricated, respectively, by interference of two coherent beams of a femtosecond laser and by interference of three coherent beams of a nanosecond laser. The dependence of the first-order Bragg diffraction efficiency and the photoinduced refractive-index modulation of the gratings on the intensity of the writing light was investigated. The measurements of the absorption spectra before and after irradiation with the writing light suggest that the photoinduced gratings were refractive-index-modulated gratings, which arose from a photoinduced decomposition reaction of the azodye molecules through multiphoton absorption. In the experiments involving the interference of three beams, the period of the two-dimensional periodic microstructures was changed by adjusting the angle between the three writing beams. Received: 10 July 2002 / Revised version: 5 September 2002 / Published online: 20 December 2002 RID="*" ID="*"Corresponding author. Fax: +81-774/955206, E-mail: jhsi@photon.jst.go.jp     

Effect of the incorporation of N,N′-methylene-bis-acrylamide on the multiplexing of holograms in a hydrophilic acrylamide photopolymer

The behaviour of a hydrophilic acrylamide photopolymer, with and without crosslinker (N,N′-methylene-bis-acrylamide), in solid layers 700 μm thick is analyzed. Slanted diffraction gratings are multiplexed at constant and variable exposure. Variable exposure time scheduling, with increased exposure time by steps is used in order to determine the effect on the dynamic range and the homogenization of diffraction efficiency values. This scheduling results in a greater dynamic range compared with constant time multiplexing. For crosslinked photopolymer, those exposure times are excessive (higher energetic sensitivity) and there is overlapping of the individual angular response curves for each stored diffraction grating.     

Design of High-Efficiency Diffraction Gratings Based on Rigorous Coupled-Wave Analysis for 800nm Wavelength

We report on the design of a high diffraction efficiency multi-layer dielectric grating with wide incident angle and broad bandwidth for 80Ohm. The optimized grating can achieve 〉 95% diffraction efficiency in the first order at an incident angle of 5° from Littrow and a wavelength from 77Ohm to 83Ohm, with peak diffraction efieieney of 〉 99.5% at 80Ohm. The electric field distribution of the optimized multi-layer dielectric grating within the gratings ridge is 1.3 times enhancement of the incidence light, which presents potential high laser resistance ability. Because of its high-effieieney, wide incident, broad bandwidth and potential high resistance ability, the multi-layer dielectric grating should have practical application in Ti：sapphire laser systems.     

Nonlinear diffraction in gratings based on polymer–dispersed TiO 2 nanoparticles

In this letter we report a simple technique to produce volume holographic gratings based on photopolymerizable composites containing TiO₂ nanoparticles. Diffraction gratings with high refractive index modulation amplitude (up to 1.25 × 10⁻²) have been formed due to the periodic distribution of high refractive index nanoparticles in a low refractive index polymer matrix. The diffraction efficiency increases strongly on increasing the nanoparticle concentration. Taking the mixture with 10 wt.% TiO₂ nanoparticles, gratings with high diffraction efficiency, low level of scattering and high transparency in the visible-wavelength range have been obtained. This will ultimately lead to different applications of diffractive optical elements based on nanocomposites. The dependence of the gratings’ diffraction efficiency on the intensity of probe laser pulses at 1064 nm has been explored. It is shown that the nonlinear response of the gratings is attributed mainly to the nonlinear properties of the TiO₂ nanoparticles embedded in the polymer matrix. The mechanism of the grating formation and the reasons for the nonlinear behavior of the diffraction efficiency are discussed.     

三光纤干涉型波分复用器的理论分析与实验

本文提出一种由三根长度不等的单模光纤作为干涉臂连接两个3×3耦合器而成的干涉型超窄三波分复用器,并对其进行了理论分析与实验研究文中给出了三角型3×3耦合器的传输矩阵及三根干涉臂的长度之差与复用波长的关系,并由此导出了整个系统的功率传输式理论分析与实验曲线基本一致我们实验样品的使用波段为155μm,波长复用间隔为16nm,插入损耗约06dB,三个端口的隔离度分别在13～16dB之间.     

Enhanced structure of a double-pass erbium-doped fiber amplifier for multiple wavelength amplifications

We demonstrate an enhanced double-pass erbium-doped fiber amplifier for multichannel amplification. The multichannel selection is formed by combining a demultiplexer and a multiplexer together in the fiber-loop mirror. The structure is able to filter out the amplified spontaneous emission that saturates the amplifier gain in the small signal regime. The maximum average gain of 47.2 dB is obtained with a gain enhancement of 12.8 dB at a ?50-dBm signal power per channel. The noise figure penalty is almost negligible for a signal power per channel of less than ?15 dBm.     

Analysis of reflection speckle holograms in a BSO crystal

A theoretical and experimental study of speckle registering in photorefractive BSO crystals through reflection hologram geometry is implemented. The three-dimensional speckle nature is considered in the diffraction efficiency calculations. The interference process produces index-of-refraction gratings in the speckle volume via the photorefractive effect. It is demonstrated that the coupled-wave theory for reflection geometry allows explaining the diffraction efficiency behavior when the interaction length is properly taken into account. It means that the speckle depth is related with the interaction length. The speckle depth can be controlled by the imaging system pupil aperture diameter. Under this condition, the influence of the speckle depth on the diffraction efficiency is analyzed. An agreement between the numerical model based on the coupled-wave theory and the experimental results is obtained.     

Volume Phase Transmission Gratings and Compact Configurations for Coarse Wavelength Division Multiplexing and Demultiplexing

Volume phase transmission gratings, that have high and uniform diffraction efficiency regardless of polarization of the incident light over a broad wavelength range, have been designed and recorded. Such gratings were incorporated successfully into a novel compact configuration of a coarse wavelength division demultiplexer. Calculated and experimental results of such gratings, and a compact four-channel demultiplexer operating in the 1500 nm to 1600 nm range are presented.