Spatiotemporal airy light bullets in the linear and nonlinear regimes

We demonstrate the realization of intense Airy-Airy-Airy (Airy(3)) light bullets by combining a spatial Airy beam with an Airy pulse in time. The Airy(3) light bullets belong to a family of linear spatiotemporal wave packets that do not require any specific tuning of the material optical properties for their formation and withstand both diffraction and dispersion during their propagation. We show that the Airy(3) light bullets are robust up to the high intensity regime, since they are capable of healing the nonlinearly induced distortions of their spatiotemporal profile.     

Spatial coherence of an optical turbulent beam in a biased photorefractive crystal due to the spatiotemporal modulation instability

We report the experimental observation of the dynamic pattern formation of a broad coherent light beam in a biased photorefractive crystal due to the spatiotemporal modulation instability. When the nonlinearity exceeds a specific threshold, the coherent light beam not only breaks up into light spots due to the modulation instability but also fast fluctuates both spatially and temporally, forming an optical turbulent beam, which behaves as a quasi-homogeneous speckled beam or a partially incoherent beam. We investigate the spatial coherence property of an optical turbulent beam from the visibility of the averaged double-slit interference fringe. We also numerically demonstrate the visibility variation of the instantaneous interference fringe of an optical turbulent beam.     

Variable shape or variable diameter flattop beam tailored by using an adaptive weight FFT-based iterative algorithm and a phase-only liquid crystal spatial light modulator

The variable shape or variable diameter flattop beam shaping technique by using an adaptive weight FFT-based iterative algorithm (AWFFT-IA) and a phase-only liquid crystal spatial light modulator (PO-LCSLM) is demonstrated. The algorithm is used to design the phase distribution for tailoring central symmetric laser beam into the desired shape or diameter flattop beam, the PO-LCSLM serves as dynamically programmable phase filters, which depend on the designed phase distributions, to retard the incident wavefront as we would expect. The experimental results show that the technique can realize variable shape or variable diameter flattop beam shaping.     

Dynamic photoelastic analysis by optical heterodyne polarimetry

This paper describes the mapping of the spatiotemporal principal stress distribution evolved with time in an epoxy photoelastic sample. In the optical heterodyne polarimeter exploited, the signal beam of light transmitted by the sample under continuously loaded condition is photomixed with the local oscillator beam of light made up of orthogonal linearly polarized two-frequency components. Every pixel of a MOS video camera used generates a beat photocurrent that possesses the two orthogonal field components of the elliptically polarized signal beam. The spatiotemporal principal stress distributions can be uniquely determined simultaneously and independently from these two orthogonal field components, and are successfully mapped in a time-sequential form. The spatial and temporal resolutions in the maps are 0.18 mm and 2.9 ms, respectively.     

Fast and Accurate Phase Retardation Measurement of 0° Twisted Nematic Liquid Crystal Panels Based on the Principle of Homodyne Receiving

We describe herein a method to measure quickly (in less than 2 min) and accurately the phase retardation between the extraordinary and ordinary axis of homogeneous or 0° twisted nematic liquid crystal panels. Owing to the homodyne detection scheme, the setup allows us to probe liquid crystal (LC) panels with an optical power down to a fraction of 1 nW and, hence makes it possible to focus the light beam to a spot of only a few wavelengths in diameter without heating or inducing observable variations in the liquid crystal. The dependence of the phase retardation on the LC driver frequency and the temperature are presented and compared with the theoretical prediction.     

Liquid-column sustainment driven by acoustic wave guiding

We report on the formation and sustainment of liquid columns with aspect ratios much larger than the value at the onset of the Rayleigh-Plateau instability. This is achieved by using the passive feedback of the radiation pressure applied on the column surface by an acoustic beam injected at the upper end of the column and guided along it. We develop an analytical model that describes the coupling between the acoustic wave guiding and the balance between acoustic and capillary surface forces exerted on the column surface and find a satisfactory agreement with the experiment.     

时空非相干光孤子的传播和相干特性

研究了时空非相干椭圆形高斯光束在饱和对数型非线性介质中的自陷行为,得到了孤子的形成条件并分析了其相干特性,讨论了光束自陷的变化形式,发现光束的初态和材料非线性对其有决定性的影响, 并进一步获得了光束半径和光束相干半径的解析表达式,发现光束的相干特性不但会随传播距离产生周期性的变化,且随组份频率的增大而减弱.     

Generalized synchronization of spatiotemporal chaos in a liquid crystal spatial light modulator

We demonstrate generalized synchronization in a spatiotemporal chaotic system, a liquid crystal spatial light modulator with optoelectronic feedback.     

Measurement of the birefringence properties of the reflecting surface of an interferential mirror

We have set up an apparatus to measure the ellipticity acquired by a linearly polarized light beam after a single quasi-normal reflection on an interferential mirror. Results of measurements performed on a standard 10 cm diameter interferential mirror are presented.     

Laser-beam smoothing induced by stimulated brillouin scattering in an inhomogeneous plasma

We present results of two-dimensional simulations of the stimulated Brillouin scattering (SBS) of an optically smoothed laser beam propagating in an expanding plasma. In the weak damping limit, both backscattered and transmitted light waves exhibit an additional spatiotemporal incoherence, which is shown to be induced by SBS taking place in an inhomogeneous plasma. This mechanism is not related to laser-beam self-focusing and is thus complementary to plasma-induced smoothing [A. J. Schmitt and B. B. Afeyan, Phys. Plasmas 5, 503 (1998)]. The incoherence induced by SBS in the entrance part of the plasma could reduce the growth of parametric instabilities developing further inside the plasma and is able to significantly enlarge the spreading angle of the transmitted light. The angular width of the backscattered light is also found to be significantly larger than the aperture angle of the incident beam.     

反射式液晶光阀用于激光束空间整形可行性研究

 从理论和实验两方面对一种反射式液晶光阀（LCOS）的调制特性进行了研究。着重研究了在高功率激光系统中,反射式液晶光阀作为空间整形器件面临的一些应用问题,特别是它的各种调制特性、整形能力以及对于光束质量的影响。研究发现,与透射式液晶光阀相比,反射式液晶光阀有着明显的优势,效率达到42%,远远优于透射式液晶光阀10%的效率,从而能够实现系统的大幅度简化,是一种非常有潜力的空间光调制器件。     

向列相液晶中光致非线性效应的研究

分析了向列相液晶中的光致非线性效应.在此基础上,基于液晶显示器工作原理设计了光控光器件.提出简化模型并利用琼斯矩阵给出光在该模型中的传输理论;引入斜入射的控制光束代替外加电压来调控液晶盒中分子的排列,实现对出射信号光的位相和光强的光-光调控;利用5CB液晶的温度特性分析环境温度对光-光调控的影响.理论分析表明:出射光位...     

Spatiotemporal optical modulation instability of coherent light in noninstantaneous nonlinear media

We report on the theoretical derivation and experimental observation of spatiotemporal modulation instability (MI) of a coherent light beam in noninstantaneous nonlinear media. We obtain analytically the MI growth rate as a function of the spatial and temporal frequencies of the perturbation and the material response time. In the experiment, we observe that the varying speed of the MI patterns increases with the decreased material response time. We also observe that increasing the material response time can arrest the MI, agreeing with our theoretical derivation.     

基于泰伯效应的高斯光束尺寸测量

光栅用在高斯光束参数测量中的突出优点是方法简单，成本较低，全息光栅由于其制备容易，无周期误差而比一般光栅具有更多的优点。在用光栅进行光斑测量的实验中，观察到由全息光栅引起的泰伯（Ｔａｌｂｏｔ）效应携带有关光斑参数的有用信息，本文提出了一种基于泰伯效应的测量方法，只需测定条纹间隔就能确定高斯光束尺寸，因此降低了对光源或光栅定位精度，电路和光源稳定性的要求，文中聚焦高斯光束照明全息光栅时光场分布，及其     

基于MPS法对亲/疏水孔隙流通特性的研究

本文模拟了液体连续流过平板上一孔隙的过程,通过为平板和孔隙表面设置亲水条件和疏水条件,研究了液体流过亲/疏水孔隙的流通特性。研究表明,在较低的初始速度下,液体通过疏水条件的孔隙所形成的液柱直径小于亲水条件下的液柱直径,疏水条件下,流过孔隙的液柱直径大约与孔隙的最小孔径相等,而亲水条件下,流过孔隙的液柱直径与液体在孔隙下端的浸润范围有关。随着初始速度增加,亲水条件下的浸润范围会逐渐减小,液柱的直径也随之逐渐减小。     

空间诱导产生艾里-贝塞尔光弹研究

利用波动方程,研究了脉冲贝塞尔光束在自由空间传输时的空间诱导群速度色散(SIGVD)效应. 结果表明,三阶SIGVD能使脉冲贝塞尔光束的时域逐渐演化为艾里分布. 由于艾里-贝塞尔光弹是一种新奇的时、空都不扩展的局域波包, 能在光与物质相互作用的很多应用领域发挥作用.因此,本文提出了 通过色散管理技术补偿二阶SIGVD,利用三阶SIGVD在自由空间产生艾里-贝塞尔光弹的方案. 为分析这种光弹的时空传输特性,数值模拟了它在色散介质中的传输情况. 结果表明,这种光弹能在色散介质中保持空域不衍射、时域不色散的稳定传输.     

用焦点法测量圆柱形熔融石英柱的材料色散

本文基于共轴球面光学系统的成像原理,介绍了一种精确测量圆柱形固体物质材料色散的方法。用此方法在436、500、560、620和680nm可见光波长上测量熔融石英柱的材料色散。通过对两种不同外径的石英柱进行测量,观察在相同的可见光波段内,外径较大的石英柱有较高的折射率灵敏度,能够插入多块单色滤光片,进行石英柱折射率的精确测量。     

Chiral molecules split light: Reflection and refraction in a chiral liquid

A light beam changes direction as it enters a liquid at an angle from another medium, such as air. Should the liquid contain molecules that lack mirror symmetry, then it has been predicted by Fresnel that the light beam will not only change direction, but will actually split into two separate beams with a small difference in the respective angles of refraction. Here we report the observation of this phenomenon. We also demonstrate that the angle of reflection does not equal the angle of incidence in a chiral medium. Unlike conventional optical rotation, which depends on the path-length through the sample, the reported reflection and refraction phenomena arise within a few wavelengths at the interface and thereby suggest a new approach to polarimetry that can be used in microfluidic volumes.     

Demonstration of the Bessel-X pulse propagating with strong lateral and longitudinal localization in a dispersive medium

We report experiments on ultrashort pulses that maintain their strong lateral and longitudinal localization in a bulk linear highly dispersive medium. The diameter of the central peak and the temporal width of the field autocorrelation function of the pulses were 20mum and 210 fs, respectively, and the spatiotemporal structure was preserved in the course of 7-cm propagation in the sample. The pulses were obtained with a computer hologram designed for generating the Bessel beam and can be applied in femtosecond laser optics.     

用于BNCT-SPECT的帕维亚TRIGA MARK II反应堆热柱优化设计

针对坐落于意大利帕维亚大学的TRIGA Mark II反应堆热柱结构进行优化设计,从而满足面向硼中子俘获治疗(BNCT)的单光子发射计算机断层成像(SPECT)研究要求。为提高计算效率并减小统计误差,对比分析使用SSW/SSR方法与直接使用反应堆为源项时热柱内照射位置处中子能谱,其结果基本一致,从而验证了SSW/SSR方法的可靠性。为在该反应堆开展BNCT中SPECT实验,热柱中子束需准直为笔形束。对比分析四种热柱优化方案下束流口处及探测器处热中子和光子通量:40 cm长石墨(射束口5 cm3 cm);0.5 cm厚硼包裹40 cm长石墨(射束口5 cm3 cm);30 cm长天然锂聚乙烯(射束口直径4 cm);30 cm长天然锂聚乙烯(20 cm长射束口直径5 cm,5 cm长射束口直径4 cm,5 cm长射束口直径2 cm)。结果显示,射束口处热中子通量分别为1.05108,2.52107,6.08107和5.10 107 #/(cm2s)。综合考虑中子准直效果及光子污染,方案三具有最优性能。为后续进行BNCT-SPECT理论和实验研究提供了基础,从而有效促进BNCT剂量准确评估方法的研究进程。