SnO2/TiO2复合纳米纤维的制备及光催化性能

采用静电纺丝技术,以聚乙烯吡咯烷酮和钛酸正丁酯为前驱体,制得锐钛矿相TiO2纳米纤维。以TiO2纳米纤维为模板,通过水热合成法,制备了具有异质结构的SnO2/TiO2复合纳米纤维。利用扫描电镜(SEM)、X射线能量色散光谱（EDS）、透射电镜(TEM)和X射线衍射(XRD)等分析测试手段对其形貌和结构进行了表征,结果表明,SnO2纳米粒子均匀地生长在TiO2纳米纤维表面,形成了异质结构的SnO2/TiO2复合纳米纤维材料。通过改变反应物浓度,能有效地实现SnO2/TiO2复合纳米纤维的可控合成。以罗丹明B为模拟污染物,考察了SnO2/TiO2复合纳米纤维的光催化性能,与纯TiO2纳米纤维相比光催化活性明显提高,初步探讨了光催化反应机理。     

硫化锌纳米空心球：合成及光学性质研究

Cubic ZnS hollow nanospheres have been prepared by a simple and template-free solvothermal method. The reaction was accomplished between Zn powder and the in-situ prepared S8. The results of X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) show that the ZnS hollow spheres are composed of ultrafine nanoparticles. The average diameters of the hollow nanospheres are about 100 nm. Their photoluminescence (PL) spectra indicate that they have excellent optical properties.     

Fabrication of hierarchically porous silica nanospheres through sol–gel process and pseudomorphic transformation

Hierarchically porous silica nanospheres with well-defined morphology and uniform particle size had been synthesized through a multistep sol–gel method combined with pseudomorphic transformation in the presence of polyvinylpyrrolidone (PVP) and cetyltrimethylammoium bromide (CTAB) as dual template. The prepared materials were characterized by small-angle X-ray diffraction, transmission electron microscopy, scanning electron microscopy, and nitrogen physical adsorption techniques. The preparation process and the origin of hierarchical structure were also investigated. It had been shown that the hierarchical structure of synthesized materials comprises wormlike framework mesopores with diameters of about 3 nm and bubble-like pores with diameters of 20–30 nm. CTAB and PVP behave as dual-template and are responsible for the formation of the mesopores and big pores, respectively. Not only the porous structure, but also the morphology and particle size of hierarchical materials can be adjusted by controlling the addition of PVP. In addition, the formation process of hierarchically porous silica was investigated by transmission electron microscopy, FT-IR spectra and thermo-gravimetric curves and a possible synthetic mechanism had been proposed.     

A novel chelating acid-assisted thermolysis procedure for preparation of tin oxide nanoparticles

Pure tin dioxide (SnO₂) nanoparticles were synthesized via thermolysis of tin phthalate and tin oxalate in the presence of oleic acid (OA) as solvent. Oleic acid (OA) was employed as an organic solvent, which can be applied to control particle growth and to stabilize the particles. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy, X-ray photoelectron spectroscopy (XPS) and photoluminescence (PL) spectroscopy. The orthorhombic phase SnO₂ nanoparticles with average size about 12 nm were synthesized through thermolysis of tin phthalate in the presence of oleic acid.     

Preparation of Cd-doped SnO<Subscript>2</Subscript> nanoparticles by sol–gel route and their optical properties

Nanocrystalline cadmium doped tin oxide (SnO₂) powders of about 2.5–4.5 nm in size have been synthesized by using different solvents via sol–gel method. The obtained samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), Energy dispersive X-ray analysis (EDX), Transmission electron spectroscopy (TEM), UV-Vis absorption and Photoluminescence (PL) spectroscopy. The PL emission spectra revealed that the band centered at 452 nm might be related with oxygen vacancies. A spherical, small rod and slice like morphologies of the prepared Cd-SnO₂ nanoparticles were observed in the SEM and TEM studies. The presence of Cd modifies the structural, morphological and optical properties of the tin oxide nanoparticles.     

Mild benzene-thermal route to GaP nanorods and nanospheres

GaP nanorods and nanospheres were synthesized from a mild benzene-thermal route at 240 and 300 degrees C, respectively, using Na, P, and GaCl(3) as the starting materials. The structure of the products was identified as zinc blende phase by X-ray powder diffraction (XRD). Transmission electron microscopy (TEM) images showed that, when the reaction temperature was 240 degrees C, the products were nanorods with widths of 20-40 nm and lengths of 200-500 nm and nanospheres with diameters of 20-40 nm. However, when the reaction temperature was increased to 300 degrees C, the products were only nanospheres, and the diameters increased to 40-60 nm. The reaction proceeded through a metallic gallium intermediate, and a solution-liquid-solid (SLS) mechanism was proposed for the one-dimensional growth. The products were also investigated by UV-vis absorption and X-ray photoelectron spectroscopy.     

Sol-gel template synthesis and photoluminescence of n- and p-type semiconductor oxide nanowires.

A sol-gel template technique has been put forward to synthesize single-crystalline semiconductor oxide nanowires, such as n-type SnO2 and p-type NiO. Scanning electron microscopy and transmission electron microscopy observations show that the oxide nanowires are single-crystal with average diameters in the range of 100-300 nm and lengths of over 10 microm. Photoluminescence (PL) spectra show a PL emission peak at 401 nm for n-type semiconductor SnO2, and a PL emission at 407 nm for p-type semiconductor NiO nanowires, respectively. Correspondingly, the observed violet-light emission at room temperature is attributed to near-band-edge emission for SnO2 nanowires and the 3d(7)4s-->3d8 transition of Ni2+ for NiO nanowires.     

Sonochemical synthesis of hollow PbS nanospheres

PbS hollow nanospheres with diameters of 80-250 nm have been synthesized by a surfactant-assisted sonochemical route. The nanostructures were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), (high-resolution) transmission electron microscopy [(HR)TEM], and scanning electron microscopy (SEM) images. Structural characterization indicates that shells of the hollow spheres are composed of PbS nanoparticles with diameters of about 12 nm. The formation of the hollow nanostructure was explained by a vesicle-template mechanism, in which sonication and surfactant play important roles. Furthermore, uniform silica layers were successfully coated onto the hollow spheres via a modified St?ber method to enhance their performance for promising applications.     

气相合成SnO2超微粒薄膜研究

用直流气体放电活化反应蒸发法在玻璃基片上沉积的SnO2超微粒薄膜,研究其过程中各工艺参数对薄膜结构的影响及作用机理.结果表明, SnO2超微粒薄膜粒径随氧分压增加而增大;蒸镀时间的延长有助于SnO2的生成,也使薄膜发生晶化;而增加放电电压,则薄膜出现外延单晶生长趋势.     

Sonochemical fabrication and characterization of stibnite nanorods

Regular stibnite (Sb(2)S(3)) nanorods with diameters of 20-40 nm and lengths of 220-350 nm have been successfully synthesized by a sonochemical method under ambient air from an ethanolic solution containing antimony trichloride and thioacetamide. The as-prepared Sb(2)S(3) nanorods are characterized by employing techniques including X-ray powder diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, energy-dispersive X-ray analysis, transmission electron microscopy, selected area electron diffraction, high-resolution transmission electron microscopy, and optical diffuse reflection spectroscopy. Microstructural analysis reveals that the Sb(2)S(3) nanorods crystallize in an orthorhombic structure and predominantly grow along the (001) crystalline plane. High-intensity ultrasound irradiation plays an important role in the formation of these Sb(2)S(3) nanorods. The experimental results show that the sonochemical formation of stibnite nanorods can be divided into four steps in sequence: (1) ultrasound-induced decomposition of the precursor, which leads to the formation of amorphous Sb(2)S(3) nanospheres; (2) ultrasound-induced crystallization of these amorphous nanospheres and generation of nanocrystalline irregular short rods; (3) a crystal growth process, giving rise to the formation of regular needle-shaped nanowhiskers; (4) surface corrosion and fragmentation of the nanowhiskers by ultrasound irradiation, resulting in the formation of regular nanorods. The optical properties of the Sb(2)S(3) amorphous nanospheres, irregular short nanorods, needle-shaped nanowhiskers, and regular nanorods are investigated by diffuse reflection spectroscopic measurements, and the band gaps are measured to be 2.45, 1.99, 1.85, and 1.94 eV, respectively.     

Spectral studies of SnO2 nanofibres prepared by electrospinning method

Tin oxide nanofibres with 100-150 nm diameter has been prepared, for the first time by calcination of poly(vinyl acetate) (PVAc)/SnO2 composite fibres prepared by electrospinning method as precursor. Scanning electron microscopic images revealed cylindrical morphology of the fibres after calcination at 600 degrees C. Both, X-ray diffraction (XRD) and Raman spectral data confirmed the presence of phase pure tetragonal rutile tin oxide after calcination process. Room temperature photoluminescence (PL) spectra of tin oxide nanofibres under excitation at 325 nm wavelength show a strong green emission at 525 nm with a band gap of 2.41 eV. FT-IR spectra confirmed the formation of pure tin oxide after calcination at 600 degrees C and complete removal of PVAc during calcination. UV-vis spectrum of the fibres showed absorption at 315 nm due to the direct electron transfer in tin oxide.     

Facile synthesis and catalytic property of porous tin dioxide nanostructures

Porous tin dioxide (SnO(2)) nanostructures consisting of nanoplates are prepared through thermal decomposition of the mixed solution composed of dibutyltin dilaurate and acetic acid. The aggregations of the nanoplates give rise to large macropores with the size of about 100-300 nm. These nanoplates have a wormhole-like porous structure with the size of about 4 nm and possess high surface area. X-ray powder diffraction, transmission electron microscopy, scanning electron microscopy, infrared spectroscopy, and nitrogen sorption have been employed to characterize the obtained porous structures. It is found that the obtained nanostructures exhibit excellent catalytic activity toward methanol decomposition. Such porous structures with high surface area have promising industrial applications as catalysts.     

作为锂离子电池负极材料的三维有序大孔SnO2的 制备及表征

通过聚苯乙烯(PS)胶晶模板法合成了三维有序大孔(3DOM) SnO2. 运用扫描电镜、热重分析、X射线衍射、电化学充放电等多种方法对其结构和性能进行了表征和研究. SEM图表明PS胶晶模板微球排列规整, 大小均匀(直径275±10 nm), 形成多层六方紧密堆积排列; 煅烧除去模板后的3DOM SnO2呈三维多孔网络结构, 具有圆型和六边形的孔隙形貌, 其孔径大小为(215±10) nm; 孔壁由SnO2纳米晶粒组成, 壁厚为20～30 nm. XRD图谱表明经过煅烧除去模板后, 形成了纯SnO2相. 当作为锂离子电池负极材料时, 3DOM SnO2表现出较好的充放电容量和库仑效率. 此外, 这种合成方法简单、经济, 可进一步应用于其它锂离子电池材料的合成.     

Synthesis and characterization of Mn2P2S6 single-crystal nanorods and nanotubes

Mn2P2S6 single-crystal nanorods with diameters 20-40 nm and lengths up to 1 microm and nanotubes with diameters 40-50 nm and lengths ranging between 110 and 170 nm have been prepared through a low-temperature solvothermal method. They have been characterized by X-ray diffraction, transmission electron microscopy (TEM), high-resolution (HR) TEM, electron diffraction, energy-dispersive spectrometry analysis, X-ray photoelectron spectroscopy, and Raman spectroscopy.     

球形SnO2 纳米微粒的合成及形成机理分析

以SnCl4*5H2O为主要原料,用溶剂热技术在油酸体系中成功地合成了球形SnO2纳米微粒,在无水乙醇体系中合成了菱形的SnO2纳米微粒.通过X射线粉末衍射(XRD),选区电子衍射(SAED)和透射电镜(TEM)对两种产物进行了表征,并对两种产物的形成机理进行了分析.透射电镜(TEM)结果表明: 在油酸体系中得到了平均尺寸约为 3.5 nm的球形SnO2纳米微粒,此微粒趋向于特殊高的比表面积,适合于作气敏探测器材料方面的应用.     

Synthesis of tin and tin oxide nanoparticles of low size dispersity for application in gas sensing

Nanocomposite core-shell particles that consist of a Sn0 core surrounded by a thin layer of tin oxides have been prepared by thermolysis of [(Sn(NMe2)2)2] in anisole that contains small, controlled amounts of water. The particles were characterized by means of electronic microscopies (TEM, HRTEM, SEM), X-ray diffraction (XRD) studies, photoelectron spectroscopy (XPS), and Mossbauer spectroscopy. The TEM micrographs show spherical nanoparticles, the size and size distribution of which depends on the initial experimental conditions of temperature, time, water concentration, and tin precursor concentration. Nanoparticles of 19 nm median size and displaying a narrow size distribution have been obtained with excellent yield in the optimized conditions. HRTEM, XPS, XRD and Mossbauer studies indicate the composite nature of the particles that consist of a well-crystallized tin beta core of approximately equals 11 nm covered with a layer of approximately equals 4 nm of amorphous tin dioxide and which also contain quadratic tin monoxide crystallites. The thermal oxidation of this nanocomposite yields well-crystallized nanoparticles of SnO2* without coalescence or size change. XRD patterns show that the powder consists of a mixture of two phases: the tetragonal cassiterite phase, which is the most abundant, and an orthorhombic phase. In agreement with the small SnO2 particle size, the relative intensity of the adsorbed dioxygen peak observed on the XPS spectrum is remarkable, when compared with that observed in the case of larger SnO2 particles. This is consistent with electrical conductivity measurements, which demonstrate that this material is highly sensitive to the presence of a reducing gas such as carbon monoxide.     

Preparation of PdCo Bimetallic Hollow Nanospheres and its Electrocatalytic Activity for Oxidation of Formic Acid

The performance of the direct formic acid fuel cell (DFAFC) is considerably higher than the direct methanol fuel cell (DMFC) because of some characteristics of formic acid1. For example, formic acid is non-toxic. Formic acid has two orders of magnitude smaller crossover flux through a Nafion membrane than methanol2. In DFAFC, the concentration of formic acid can be as high as 20 mol/L, while the best concentration of methanol in DMFC is only about 2 mol/L3. Thus, the power density of …     

Large-area Sb2Te3 nanowire arrays

High-density large-area nanowire arrays of thermoelectric material Sb(2)Te(3) have been successfully prepared using electrochemical deposition into the channels of the porous anodic alumina membrane. The morphologies, structure, and composition of the as-prepared Sb(2)Te(3) nanowires have been characterized using field-emission scanning electron microscopy, transmission electron microscopy, high-resolution transmission electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. Individual Sb(2)Te(3) nanowires are single crystalline and continuous with uniform diameters ( approximately 50 nm) throughout the entire length. The atomic ratio of Sb to Te is very close to the 2:3 stoichiometry.     

In2O3八面体的碳还原法制备及其发光性能研究

In₂O₃ octahedrons were synthesized by carbothermal reduction using In₂O₃ nanoparticles as the source material. The as-synthesized products were characterized by X-ray powder diffraction (XRD), energy dispersive X-ray(EDX), scanning electron microscopy(SEM), transmission electron microscopy(TEM), high-resolution transmission electron microscopy (HRTEM), selected-area electron diffraction analysis(SAED) and Room-temperature photoluminescence(PL) spectroscopy. The results show that the products are single-crystalline In₂O₃ octahedrons, the length of the octahedrons is in the range of 400～3 000 nm; the PL patterns display two peaks located at 447nm and 555 nm upon excitation at 380 nm, and the other two peaks located at 444 nm and 550 nm upon excitation at 325 nm; the excitation pattern shows two peaks located at 274 nm and 371 nm, respectively. The growth mechanism of the In₂O₃ octahedrons is discussed, and the high supersaturation ratio is considered as the key factor.     

Synthesis, characterization, and photoluminescence property of LaCO3OH microspheres

Novel LaCO3OH microspheres with the hexagonal phase were synthesized by a hydrothermal method using La(NO3)(3).6H2O and urea CO(NH2)2 as the starting materials. Various experimental parameters were examined, such as the reaction temperature, the reaction time, and the molar ratios of the starting reagents. The as-synthesized products were characterized by powder X-ray diffraction, transmission electron microscopy, field-emission scanning electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and photoluminescence (PL). The PL result showed one broad emission band centered at 438 nm (lambdaex=365 nm) of the pure LaCO3OH microspheres. In addition, a possible formation mechanism of LaCO3OH microspheres and the PL property of pure LaCO3OH microspheres were discussed.