Formation and structure of a dense octahedral glass

We have performed in situ x-ray and neutron-diffraction measurements, and molecular dynamics simulations, of GeO2, an archetypal network-forming glass under pressure. Below 5 GPa, additional atoms encroaching on the first tetrahedral shell are seen to be a precursor of local coordination change. Between 6 and 10 GPa, we observe structures with a constant average coordination of approximately 5, indicating a new metastable, intermediate form of the glass. At 15 GPa, the structure of a fully octahedral glass has been measured. This structure is not retained upon decompression and, therefore, must be studied in situ.     

Phase transitions in KIO(3)

The high-pressure behavior of KIO(3) was studied up to 30?GPa using single crystal and powder x-ray diffraction, Raman spectroscopy, second harmonic generation (SHG) experiments and density functional theory (DFT)-based calculations. Triclinic KIO(3) shows two pressure-induced structural phase transitions at 7?GPa and at 14?GPa. Single crystal x-ray diffraction at 8.7(1)?GPa was employed to solve the structure of the first high-pressure phase (space group R3, a?=?5.89(1) ?, α?=?62.4(1)°). The bulk modulus, B, of this phase was obtained by fitting a second order Birch-Murnaghan equation of state (eos) to synchrotron x-ray powder diffraction data resulting in B(exp,second)?=?67(3)?GPa. The DFT model gave B(DFT,second)?=?70.9?GPa, and, for a third order Birch-Murnaghan eos, B(DFT,third)?=?67.9?GPa with a pressure derivative of [Formula: see text]. Both high-pressure transformations were detectable by Raman spectroscopy and the observation of second harmonic signals. The presence of strong SHG signals shows that all high-pressure phases are acentric. By using different pressure media, we showed that the transition pressures are very strongly influenced by shear stresses. Earlier work on low- and high-temperature transitions was complemented by low-temperature heat capacity measurements. We found no evidence for the presence of an orientational glass, in contrast to earlier dielectric studies, but consistent with earlier low-temperature diffraction studies.     

Structure of alkali borate glasses at high pressure: B and Li K-edge inelastic X-ray scattering study

We report the first in situ boron K-edge inelastic x-ray scattering (IXS) spectra for alkali borate glasses (Li2B4O7) at high pressure up to 30 GPa where pressure-induced coordination transformation from three-coordinated to four-coordinated boron was directly probed. Coordination transformation (reversible upon decompression) begins around 5 GPa and the fraction of four-coordinated boron increases with pressure from about 50% (at 1 atm) to more than 95% (at 30 GPa) with multiple densification mechanisms, evidenced by three distinct pressure ranges for (d[4]B/dP)T. The lithium K-edge IXS spectrum for Li-borate glasses at 5 GPa shows IXS features similar to that at 1 atm, suggesting that the Li environment does not change much with pressure up to 5 GPa. These results provide improved understanding of the structure of low-z glass at high pressure.     

Structure of polymeric carbon dioxide CO2-V

The structure of polymeric carbon dioxide (CO2-V) has been solved using synchrotron x-ray powder diffraction, and its evolution followed from 8 to 65 GPa. We compare the experimental results obtained for a 100% CO2 sample and a 1 mol?% CO2/He sample. The latter allows us to produce the polymer in a pure form and study its compressibility under hydrostatic conditions. The high quality of the x-ray data enables us to solve the structure directly from experiments. The latter is isomorphic to the β-cristobalite phase of SiO2 with the space group I42d. Carbon and oxygen atoms are arranged in CO4 tetrahedral units linked by oxygen atoms at the corners. The bulk modulus determined under hydrostatic conditions, B0=136(10) GPa, is much smaller than previously reported. The comparison of our experimental findings with theoretical calculations performed in the present and previous studies shows that density functional theory very well describes polymeric CO2.     

AsS melt under pressure: one substance, three liquids

An in situ high-temperature--high-pressure study of liquid chalcogenide AsS by x-ray diffraction, resistivity measurements, and quenching from melt is presented. The obtained data provide direct evidence for the existence in the melt under compression of two transformations: one is from a moderate-viscosity molecular liquid to a high-viscosity nonmetallic polymerized liquid at P approximately 1.6-2.2 GPa; the other is from the latter to a low-viscosity metallic liquid at P approximately 4.6-4.8 GPa. Upon rapid cooling, molecular and metallic liquids crystallize to normal and high-pressure phases, respectively, while a polymerized liquid is easily quenched to a new AsS glass. General aspects of multiple phase transitions in liquid AsS, including relations to the phase diagram of the respective crystalline, are discussed.     

Structure of B2O3 Glass at High Pressure: A 11B Solid-State NMR Study

We report spectroscopic evidence for the pressure-induced structural changes in B2O3 glass quenched from melts at pressures up to 6 GPa using solid-state NMR. While all borons are tri-coordinated at 1 atm, the fraction of tetra-coordinated boron increases with pressure, being about 5% and 27% in the B2O3 glass quenched from melts at 2 and 6 GPa, respectively. The fraction of boroxol ring species increases with pressure up to 2 GPa and apparently decreases with further compression up to 6 GPa. Two densification mechanisms are proposed to explain the variation of boron species with pressure.     

动态压缩下马氏体相变力学性质的微观研究

使用分子动力学方法,模拟了活塞以恒定加速运动从一端压缩单晶铁（沿［001］晶向）发生马氏体相变的微观过程.根据模拟结果将上述压缩过程分为弹性压缩、晶格软化、相变（bcc至hcp）、超应力松弛和高压相弹性压缩五个阶段,对各阶段的原子滑移规律和应力变化特征做了详细分析.分析得出应力超过约10 GPa时,开始出现弹性常数软化行为;层错结构（fcc）和孪晶界为新相形核的两种缺陷,前者更为稳定;相变后粒子首先进入超应力松弛状态（即沿加载方向的偏应力呈现负值）,在应力超过约36 GPa粒子转变为高压相弹性压缩状态. 关键词： 分子动力学 单晶铁 相变 动态压缩     

Superhard F-carbon predicted by ab initio particle-swarm optimization methodology

A simple (5 + 6 + 7)-sp(3) carbon (denoted as F-carbon) with eight atoms per unit cell predicted by a newly developed ab initio particle-swarm optimization methodology on crystal structure prediction is proposed. F-carbon can be seen as the reconstruction of AA-stacked or 3R-graphite, and is energetically more stable than 2H-graphite beyond 13.9 GPa. Band structure and hardness calculations indicate that F-carbon is a transparent superhard carbon with a gap of 4.55 eV at 15 GPa and a hardness of 93.9 GPa at zero pressure. Compared with the previously proposed Bct-, M- and W-carbons, the simulative x-ray diffraction pattern of F-carbon also well matches the superhard intermediate phase of the experimentally cold-compressed graphite. The possible transition route and energy barrier were observed using the variable cell nudged elastic band method. Our simulations show that the cold compression of graphite can produce some reversible metastable carbons (e.g. M- and F-carbons) with energy barriers close to diamond or lonsdaleite.     

High pressure study of phase transitions inα-FePO4

High pressure behaviour of FePO₄ in berlinite form has been investigated up to 10 GPa using vibrational Raman spectroscopy and energy dispersive x-ray diffraction. Combination of these techniques along with studies on pressure quenched samples reveal structural transitions in this material from its room pressure trigonal phase to a disordered and a crystalline phase near 3±0.5 GPa. The latter is the Cmcm phase which is the equilibrium structure at high pressures. These high pressure phases do not revert back to its initial structure after release of pressure. Irreversibility of these transformations indicates that FeO₄ tetrahedra do not regain their initial coordination. These high pressure transitions can be rationalized in terms of the three level free energy diagram for such systems.     

Ab?initio molecular dynamics model for density, elastic properties and short range order of Co-Fe-Ta-B metallic glass thin films

Density, elastic modulus and the pair distribution function of Co-Fe-Ta-B metallic glasses were obtained by ab initio molecular dynamics simulations and measured for sputtered thin films using x-ray reflectivity, nanoindentation and x-ray diffraction using high energy photons. The computationally obtained density of 8.19 g cm(-3) for Co(43)Fe(20)Ta(5.5)B(31.5) and 8.42 g cm(-3) for Co(45.5)Fe(24)Ta(6)B(24.5), as well as the Young's moduli of 273 and 251 GPa, respectively, are consistent with our experiments and literature data. These data, together with the good agreement between the theoretical and the experimental pair distribution functions, indicate that the model established here is useful to describe the density, elasticity and short range order of Co-Fe-Ta-B metallic glass thin films. Irrespective of the investigated variation in chemical composition, (Co, Fe)-B cluster formation and Co-Fe interactions are identified by density-of-states analysis. Strong bonds within the structural units and between the metallic species may give rise to the comparatively large stiffness.     

Density-driven structural transformations in network forming glasses: a high-pressure neutron diffraction study of GeO(2) glass up to 17.5?GPa

The structure of GeO(2) glass was investigated at pressures up to 17.5(5)?GPa using in situ time-of-flight neutron diffraction with a Paris-Edinburgh press employing sintered diamond anvils. A new methodology and data correction procedure were developed, enabling a reliable measurement of structure factors that are largely free from diamond Bragg peaks. Calibration curves, which are important for neutron diffraction work on disordered materials, were constructed for pressure as a function of applied load for both single and double toroid anvil geometries. The diffraction data are compared to new molecular-dynamics simulations made using transferrable interaction potentials that include dipole-polarization effects. The results, when taken together with those from other experimental methods, are consistent with four densification mechanisms. The first, at pressures up to ??5?GPa, is associated with a reorganization of GeO(4) units. The second, extending over the range from ??5 to 10?GPa, corresponds to a regime where GeO(4) units are replaced predominantly by GeO(5) units. In the third, as the pressure increases beyond ～10?GPa, appreciable concentrations of GeO(6) units begin to form and there is a decrease in the rate of change of the intermediate-range order as measured by the pressure dependence of the position of the first sharp diffraction peak. In the fourth, at about 30?GPa, the transformation to a predominantly octahedral glass is achieved and further densification proceeds via compression of the Ge-O bonds. The observed changes in the measured diffraction patterns for GeO(2) occur at similar dimensionless number densities to those found for SiO(2), indicating similar densification mechanisms for both glasses. This implies a regime from about 15 to 24?GPa where SiO(4) units are replaced predominantly by SiO(5) units, and a regime beyond ～24?GPa where appreciable concentrations of SiO(6) units begin to form.     

Reassigning hydrogen-bond centering in dense ice

Hydrogen bonds in H2O ice change dramatically upon compression. Thereby a hydrogen-bonded molecular crystal, ice VII, is transformed to an atomic crystal, ice X. Car-Parrinello simulations reproduce the features of the x-ray diffraction spectra up to about 170 GPa but allow for analysis in real space. Starting from molecular ice VII with static orientational disorder, dynamical translational disordering occurs first via creation of ionic defects, which results in a systematic violation of the ice rules. As a second step, the transformation to an atomic solid and thus hydrogen-bond centering occurs around 110 GPa at 300 K and no novel phase is found up to at least 170 GPa.     

High-pressure study of x-ray diffuse scattering in ferroelectric perovskites

We present a high-pressure x-ray diffuse scattering study of the ABO3 ferroelectric perovskites BaTiO3 and KNbO3. The well-known diffuse lines are observed in all the phases studied. In KNbO3, we show that the lines are present up to 21.8 GPa, with constant width and a slightly decreasing intensity. At variance, the intensity of the diffuse lines observed in the cubic phase of BaTiO3 linearly decreases to zero at approximately 11 GPa. These results are discussed with respect to x-ray absorption measurements, which leads to the conclusion that the diffuse lines are only observed when the B atom is off the center of the oxygen tetrahedron. The role of such disorder on the ferroelectric instability of perovskites is discussed.     

First-order isostructural Mott transition in highly compressed MnO

We present evidence for an isostructural, first-order Mott transition in MnO at 105+/-5 GPa, based on high-resolution x-ray emission spectroscopy and angle-resolved x-ray diffraction data. The pressure-induced structural and spectral changes provide a coherent picture of MnO phase transitions from paramagnetic B1 to antiferromagnetic distorted B1 at 30 GPa, to paramagnetic B8 at 90 GPa, and to diamagnetic B8 at 105+/-5 GPa. The last is the Mott transition, accompanied by a significant loss of magnetic moment, an approximately 6.6% volume collapse and the insulator-metal transition as demonstrated by recent resistance measurements.     

Ion hydration under pressure

The pressure dependence of the radial distribution of water oxygen atoms around Rb+ and Br- ions in a diluted RbBr aqueous solution has been investigated by means of x-ray absorption spectroscopy at the Br and Rb K edges up to 2.8 GPa, using a large-volume high-pressure setup developed at a third generation synchrotron radiation facility. Dramatic effects in the anion hydration structure, in particular, are observed, indicating that upon increasing pressure water undergoes a structural transformation which involves considerable molecular reorientation.     

Structural phase transitions of tellurium nanoplates under pressure

In situ high-pressure angle dispersive x-ray diffraction experiments using synchrotron radiation on Te nanoplates were carried out with a diamond anvil cell at room temperature. The results show that Te-I with a trigonal structure transforms to triclinic Te-II at about 4.9 GPa, Te-II transforms to monoclinic Te-III at about 8.0 GPa, Te-III turns to rhombohedral Te-IV at about 23.8 GPa, and Te-IV changes to body centered cubic Te-V at 27.6 GPa. The bulk moduli B0 of Te nanoplates are higher than those of Te bulk materials.     

Exploring the compression behavior of HP-BiNbO_4 under high pressure

In the present work, a third form, the so-called HP-BiNbO_4 synthesized at high pressure and high temperature is investigated with the in-situ angle-dispersive x-ray diffraction(ADXRD) measurements under high pressure. We explore the compression behavior and phase stability of HP-BiNbO_4. The structure of HP-BiNbO_4 is first determined. The x-ray diffraction data reveal that the structure HP-BiNbO_4 is stable under pressures up to 24.1 GPa. The ADXRD data yield a bulk modulus K_o = 185(7) GPa with a pressure derivative K_o'= 2.9(0.8). Furthermore, the data are compared with those of other ABO_4 compounds. The results show that the bulk modulus of HP-BiNbO_4(about 185 GPa) is slightly higher than that of tetragonal BiVO_4 and significantly greater than those of the tungstates and molybdates.     

Temperature dependence of bismuth structures under high pressure

It is unclear whether there is a liquid-liquid phase transition or not in the bismuth melt at high temperature and high pressure. If so, it will be necessary to confirm the boundary of the liquid-liquid phase transition and clarify whether it is a first-order phase transition. Here, based on x-ray absorption spectra and simulations, the temperature dependence of bismuth structures is investigated under different pressures. According to the similarity of characteristic peaks of x-ray absorption near edge structure (XANES) spectra, we estimate the possible temperature ranges of liquid-liquid phase transition to be 779-799 K at 2.74 GPa and 859-879 K at 2.78 GPa, 809-819 K at 3.38 GPa and 829-839 K at 3.39 GPa and 729-739 K at 4.78 GPa. Using ab initio molecular dynamics (AIMD) simulations, we obtain the stable structures of the bismuth melt at different temperatures and pressures, and calculated their electronic structures. Meanwhile, two stable phases (phase III-like and phase IV-like) of bismuth melts are obtained from different initial phases of bismuth solids (phase III and phase IV) under the same condition (3.20 GPa and 800 K). Assuming that the bismuth melt undergoes a phase transition from IV-like to III-like between 809 K and 819 K at 3.38 GPa, the calculated electronic structures are consistent with the XANES spectra, which provides a possible explanation for the first-order liquid-liquid phase transition.     

Pressure-induced sharp coordination change in liquid germanate

Local structures around germanium in liquid germanate have been investigated by means of in situ x-ray absorption measurements up to 9 GPa at 1273 K. Liquid germanate consisting of tetrahedrally coordinated germanium contracts with increasing pressure without significant changes in the local structure up to 2.5 GPa and then shows an abrupt fourfold-to-sixfold coordination change around 3 GPa. The coordination change is completed below 4 GPa where upon a high-density liquid consisting of octahedrally coordinated germanium becomes stable. The GeO6 octahedron in the high-density liquid is more compressible than that in solids.     

Mo高压熔化的分子动力学模拟

 采用第一原理方法计算了钼在零温下的结构,表明钼在500 GPa以下一直保持bcc结构（常温）,与实验一致。在零压附近计算了E-V关系,利用Murnaghan物态方程拟合得到了零压体积及其模量,与实验结果符合得很好。采用第一原理分子动力学模拟了钼的高压熔化性质。采用NVT系综计算了128个原子的系统,初始构形为bcc结构,体积分别为0.015 48、0.012 19、0.010 98、0.009 84、0.009 10 nm³/atom,计算了几个温度点,拟合得到了熔化曲线,熔化温度明显高于金刚石压砧（DAC）实验结果;将初始构形改变为fcc结构,模拟其熔化特性,得到的熔化温度明显下降,与激光加载DAC实验结果一致,认为可能的原因是钼熔化后形成的液体结构类似于fcc结构,而不是常态时的bcc结构。