Discovering new ordered phases of block copolymers

We propose a new and general method for discovering novel ordered phases of block copolymer melts. The method involves minimizing a free energy functional in an arbitrary unit cell with respect to the composition profile and the dimensions of the unit cell, without any prior assumption of the microphase symmetry. Varying the initial conditions allows to search for different stable and metastable structures. Application of this method to ABC star and linear triblock copolymers using an approximate free energy reveals new morphologies not yet observed in experiment.     

Contrast variation SANS experiments to the study of detergent-induced micellization of block copolymers

PEO—PPO—PEO triblock copolymer P85 [(EO)₂₆(PO)₃₉(EO)₂₆] dissolves as unimers and detergent sodium dodecyl sulfate (SDS) forms micelles in aqueous solution at 20°C. The mixing of detergent with triblock copolymer induces the micellization of triblock copolymers. Contrast variation small-angle neutron scattering measurements show that triblock copolymer forms mixed micelles with detergent and the mixing of two components in the mixed micelles is uniform.     

Experimental studies of the jamming behaviour of triblock copolymer solutions and triblock copolymer-anionic surfactant mixtures

Photon correlation spectroscopy and rheological measurements are performed to investigate the microscopic dynamics and mechanical responses of aqueous solutions of triblock copolymers and aqueous mixtures of triblock copolymers and anionic surfactants. Increasing the concentration of triblock copolymers results in a sharp increase in the magnitude of the complex moduli characterising the samples. This is understood in terms of the changes in the aggregation and packing behaviours of the copolymers and the constraints imposed upon their dynamics due to increased close packing. The addition of suitable quantities of an anionic surfactant to a strongly elastic copolymer solution results in a decrease in the complex moduli of the samples by several decades. It is argued that the shape anisotropy and size polydispersity of the micelles comprising mixtures cause dramatic changes in the packing behaviour, resulting in sample unjamming and the observed decrease in complex moduli. Finally, a phase diagram is constructed in the temperature-surfactant concentration plane to summarise the jamming-unjamming behaviour of aggregates constituting triblock copolymer-anionic surfactant mixtures.     

CORRELATION BETWEEN MORPHOLOGY AND MECHANICAL PROPERTIES OF DIFFERENT STYRENE/BUTADIENE TRIBLOCK COPOLYMERS: A SCANNING FORCE MICROSCOPY STUDY*

The morphology of different styrene/butadiene (SB) block copolymers with triblock architectures was investigated using tapping mode scanning force microscopy (SFM). Comparative analysis of the morphology of the samples at the polymer/substrate interface of solution-cast films and in bulk was performed. It was found that, besides the total phase volume ratio, the interfacial structure between the incompatible chains determines the phase morphology and mechanical properties of the investigated block copolymers. The asymmetric SBS triblock copolymer (φ_ps( 74 vol%) forms, as expected, a cylindrical morphology with hexagonally packed polybutadiene (PB) cylinders in the polystyrene (PS) matrix. Depending on the interfacial structure, block configuration, and the hard/soft phase ratio, other triblock copolymers (φ_ps( 74 vol% and 65 vol%) show lamellae and randomly distributed PS cylinders in a random styrene/butadiene copolymer S/B matrix, respectively.

     

Tricontinuous cubic structures in ABC/A/C copolymer and homopolymer blends

Using the Monte Carlo lattice-simulation technique, we present numerical evidence of the formation of gyroid and nongyroid tricontinuous cubic phases in high polymeric systems of ABC/A/C triblock copolymer and homopolymer blends. By increasing the volume fraction of homopolymer, a remarkable phase sequence G (gyroid) --> D (diamond) --> P (primitive) is observed, which is common to certain surfactant systems. Our results indicate that the ABC triblock copolymer system with blending homopolymers may be a zoo of cubic phases, suitable for comparative studies of these phases.     

Self-assembly of block copolymers grafted onto a flat substrate:Recent progress in theory and simulations

Block copolymers are a class of soft matter that self-assemble to form ordered morphologies on the scale of nanometers, making them ideal materials for various applications. These applications directly depend on the shape and size of the self-assembled morphologies, and hence, a high degree of control over the self-assembly is desired. Grafting block copolymer chains onto a substrate to form copolymer brushes is a versatile method to fabricate functional surfaces. Such surfaces demonstrate a response to their environment, i.e., they change their surface topography in response to different external conditions. Furthermore, such surfaces may possess nanoscale patterns, which are important for some applications; however, such patterns may not form with spun-cast films under the same condition. In this review, we summarize the recent progress of the self-assembly of block copolymers grafted onto a flat substrate. We mainly concentrate on the self-assembled morphologies of end-grafted AB diblock copolymers, junction point-grafted AB diblock copolymers(i.e.,Y-shaped brushes), and end-grafted ABA triblock copolymers. Special emphasis is placed on theoretical and simulation progress.     

Designing and Characterization of Poly(L-Lactide)/Poly(ϵ-Caprolactone) Multiblock Copolymers

A series of poly(L-lactide)/poly(?-caprolactone) (PLA/PCL) biodegradable multiblock copolymers was synthesized by a two-step process and characterized. Ring-opening polymerization was used to prepare a series of HO-PLA-PCL-PLA-OH copolymers initiated by hydroxyl-terminated PCL. Then the triblock copolymers and 1,6-hexamethylene diisocyanate (HDI) were reacted with different copolymer/HDI weight ratios. Consequently, a series of PLA/PCL multiblock copolymers with designed molecular chain structure was obtained. Gel permeation chromatography (GPC), Fourier transform infrared (FTIR) spectroscopy, and ¹H NMR were used to characterize these copolymers and the results showed that the designed PLA/PCL copolymers had been synthesized. Dynamic mechanical analysis (DMA) was applied to characterize their thermal properties. Stress–strain curves showed that a PLA/PCL copolymer with adjustable mechanical properties had been achieved.     

Amphiphilic block copolymer nanocontainers as bioreactors

Self-assembly of an amphiphilic triblock copolymer carrying polymerizable end-groups is used to prepare nanometer-sized vesicular structures in aqueous solution. The triblock copolymer shells of the vesicles can be regarded as a mimetic of biological membranes although they are 2 to 3 times thicker than a conventional lipid bilayer. Nevertheless, they can serve as a matrix for membrane-spanning proteins. Surprisingly, the proteins remain functional despite the extreme thickness of the membranes and that even after polymerization of the reactive triblock copolymers. This opens a new field to create mechanically stable protein/polymer hybrid membranes. As a representative example we functionalize (polymerized) triblock copolymer vesicles by reconstituting a channel-forming protein from the outer cell wall of Gram-negative bacteria. The protein used (OmpF) acts as a size-selective filter, which allows only for passage of molecules with a molecular weight below 400 g mol^-1. Therefore substrates may still have access to enzymes encapsulated in such protein/polymer hybrid nanocontainers. We demonstrate this using the enzyme β-lactamase which is able to hydrolyze the antibiotic ampicillin. In addition, a transmembrane voltage above a given threshold causes a reversible gating transition of OmpF. This can be used to reversibly activate or deactivate the resulting nanoreactors. Received 22 August 2000     

Smart Nanovalves with Thermoresponsive Amphiphilic Triblock Copolymer Brushes

Nanochannels modified with stimuli-responsive copolymer brushes offer a smart nanovalve mechanism. The potential application of these special nanovalves is wide-ranging and includes the areas of drug delivery and signal transduction, as well as molecular machines. In this study, molecular dynamics simulations were performed to study nanovalve systems that use thermo-responsive amphiphilic triblock copolymer brushes grafted onto the surface of the nanochannel. Varying the system temperature facilitated the extension/collapse transition of the copolymer brushes, which resulted in the opening/closing of the nanochannels. The results of the investigation of the effect of the grafting density and the composition of the copolymers on the conformational transition behavior showed that the composition of copolymer has a significant influence on the nanovalve system. A remarkable result is the effectiveness of the use of intermediate or relatively low grafting density in obtaining an ideal controlling effect on the nanochannels. Our work provides a fundamental understanding of nanovalves that utilize thermo-responsive copolymers, and guidance for the design of a smart nanochannel.     

基于自洽场理论两亲高分子自组装的研究

运用扩展的自洽场和密度泛函理论(SCF/DFT),研究ABC蝌蚪形两亲高分子在稀溶剂中的自组装形态,其中蝌蚪形两亲高分子由线形嵌段共聚物链AB嫁接到球形纳米颗粒C上构成.与以往研究的线形ABC两亲高分子相比,蝌蚪形两亲高分子的自组装形态有着很大的不同.在粒子亲溶剂,嵌段共聚物疏溶剂时,各组分间弱分凝条件下,蝌蚪形两亲高分子自组装成胶球状形貌;在强分凝条件下,随着嵌段共聚物疏溶剂性的增强,两亲高分子的自组织态由胶球状转变成四角、三角状形貌,其中嵌段B主要分布在各角上.通过改变各组分间的相互作用,在嵌段A亲溶剂,嵌段B和粒子疏溶剂时,粒子呈平行棒状或小方块状分布在胶球中.     

Phase behavior of triblock copolymers varying in molecular asymmetry

The transformation from A(1)B diblock copolymer to A(1)BA(2) triblock copolymers varying in molecular asymmetry is investigated as the A(2) end block is progressively grown via chemical synthesis. Dynamic rheological measurements show that the order-disorder transition (ODT) temperatures of two copolymer series differing in composition and molecular weight decrease when the A(2) block is short relative to the A(1) block, and then increase as the length of the A(2) block is increased further. The resultant ODT minimum, predicted by mean-field theory, is attributed to mixing between long B and short A(2) blocks.     

受限壁的选择性对软受限下星形三嵌段共聚物形貌的影响

基于嵌段共聚物在软受限条件下能够自组装形成很多有序结构,在催化、电子器件、光学传感等领域有广泛的应用价值,目前只对线性三嵌段共聚物在软受限下的自组装形貌做了分析,对星形三嵌段共聚物在软受限下的自组装行为还未有一个统一的定论.在这项研究中,应用模拟退火来研究ABC星形三嵌段共聚物在软受限下的自组装行为,嵌段与溶剂没有选择性下(中性壁),通过调整三个嵌段(f_A、f_B和f_C)的体积分数来构建相图,我们的模拟预测了各种独特的自组装纳米结构,包括薄片+球形、圆柱状,穿孔层,薄片+圆柱体,核壳补丁.然后通过改变嵌段与溶剂的选择性预测了链长度比为1:x:1的共聚物粒子形貌.通过计算接触数、均方根末端距与平均链长的比值以及平均键长随x的变化,验证了形貌转变机制.     

Surface investigation of adhesive formulation consisting of UV sensitive triblock poly(styrene–b-butadiene–b-styrene) copolymer

Atomic force microscopy (AFM) analysis in conjunction with macroscopic studies such as peel testing and contact angle measurement have been undertaken to explain the nanomechanical properties of adhesive formulation consisting of triblock poly(styrene–b-butadiene–b-styrene) (SBS) copolymers. The cross-linking of this photosensitive copolymer was investigated by analyzing the mechanical and morphological changes of each phase induced by the UV exposure. Main result is that the adhesive properties are strongly influenced by the cross-linking of the polybutadiene (PB) phase leading to an increase in the surface stiffness without affecting the surface energy. AFM analysis shows that the adhesion force is mostly governed by the contact area between the adhesive and the probe. The surface mobility may explain the increase in adhesion for this pressure sensitive copolymer.     

Towards the higher solubility and thermal stability of poly(aniline-<Emphasis Type="Italic">co</Emphasis>-<Emphasis Type="Italic">m</Emphasis>-bromoaniline)

In the current study, we have described the synthesis and the physical properties of poly(aniline-co-m-bromoaniline) conducting copolymers. The copolymers of different composition are essentially obtained by varying the molar feed ratio of the two monomers. The higher solubility of the copolymers could be procured as compared to polyaniline (PA) in different solvents. The electrical conductivity has been studied by two-probe method; at room temperature, the conductivity of the copolymer decreases upon increasing the molar ratio of m-bromoaniline monomer. The introduction of bromine (–Br) group reduces the degree of conjugation in the polymer chain. Thus, conduction of electrons is prohibited along the conjugated system. In the thermogravimetric analysis (TGA), a three-stage decomposition of the copolymer has been observed. The copolymers of poly(aniline-co-m-bromoaniline) are thermally stable at high temperature. The composition of the copolymer has been confirmed from the binding energies of C–C, C–N, and C–Br in the XPS study.     

Electronic confinement in quasi—one—dimensional triblock copolymers

A tight-binding calculation to describe the triblock copolymer xPA(polyacetylene)/nPPP (poly(p-phenylene))/yPA or xPPP/nPA/yPPP is presented. The interfacial coupling between homopolymer segments is attributed to the hopping of π-electrons and the coupling of σ-bonds. The dependence of the band gap of triblock copolymers on the interfacial couplings or on the composite segment lengths is studied. The influence of composite segment lengths on the electron density is also studied. For nPPP/xPA/nPPP structures, the band gap varies with PA segment length over a wide range of 1.32－2.74eV. For nPA/xPPP/nPA structures,the band gap is invariant with PPP segment length. It is found that a spontaneous tunnelling phenomenon could take place in nPA/xPPP/nPA structures. Furthermore, the polaron caused by doping an electron into nPA/xPPP/nPA will tend to be confined in one of the well (PA) parts. This kind of confinement may increase the electron－hole recombination probability.     

The influence of chain stretching on the phase behavior of multiblock copolymer and comb copolymer melts

The subject of this paper is inspired by microphase-separated copolymer melts in which a small-scale structure is present inside one of the phases of a large-scale structure. Such a situation can arise in a diblock copolymer melt, if one of the blocks of the diblock is in itself a multiblock copolymer or a comb copolymer. Due to the presence of the large-scale structure, the chains are stretched. The aim of this paper is to investigate the influence of this chain stretching on the formation of the small-scale structure. To gain insight we study infinite melts of infinitely long copolymer chains that are subjected to a stretching force. For melts of monodisperse multiblock copolymers we find that the stretching destabilizes the homogeneous phase. If the stretching is strong, the lamellar structure is the only stable structure. The periodicity increases with the degree of stretching. For melts of monodisperse comb copolymers the chain stretching has no influence on the stability of the homogeneous phase. If the stretching is strong, the lamellar structure and the hexagonal structure are the only stable structures. The periodicity is independent of the degree of stretching. For the multiblock copolymer we investigated the influence of block length polydispersity. For small polydispersity the period of the structure increases monotonically with the degree of stretching. For intermediate polydispersity, the period initially decreases before it starts to increase. For large polydispersity, the mean-field period at the spinodal is infinite, becoming finite once the stretching force exceeds some critical value. For very large polydispersity the mean-field period at the spinodal remains infinite for any value of the stretching force. Received: 14 February 2002 / Accepted: 24 March 2003 / Published online: 29 April 2003 RID="a" ID="a"e-mail: hindrik.angerman@abp.nl     

The Effect of Hydrophilic Bentonite Nanoclay on the Thermogelation Properties of Poly(N-isopropylacrylamide)-poly(ethylene glycol)-poly(N-isopropylacrylamide) Triblock Copolymer Aqueous Solutions

The effect of hydrophilic bentonite addition on the thermogelation properties of aqueous solutions of poly(N-isopropylacrylamide)–poly(ethylene glycol)–poly(N-isopropylacrylamide) (PNIPAM-PEG-PNIPAM) triblock copolymers of various compositions and molecular weights was investigated. Dynamic rheometry and differential scanning calorimetry (DSC) measurements showed that increasing concentrations of clay added to 20 wt.% polymer aqueous solutions caused a decrease of the temperature at which the viscosity starts increasing, while the temperature corresponding to the maximum endothermic effect due to the PNIPAM chain dehydration remained practically unchanged. The storage modulus, G′, increased with clay concentration for shorter PNIPAM chain triblock copolymers, while an opposite situation occurred in the case of the block copolymer with the longest PNIPAM block. For bentonite concentrations above 1 wt.%, G′ was larger than the viscous modulus, G″, at temperatures higher than the phase separation temperature, indicating a predominantly elastic character of the resulting composite hydrogels. These findings were explained through the presence of polymer–clay interactions occurring mainly through the PEG blocks.     

最有效的相容剂是两嵌段还是多嵌段聚合物？

采用Monte Carlo模拟方法研究了多嵌段聚合物在A／B／嵌段聚合物三组份体系作为相容剂使用的有效性．占总体积19％的A组份在体系中为分散相．模拟结果显示了两嵌段和多嵌段聚合物在界面上的聚集行为,以及如何影响这个不相容体系的相形为．两嵌段聚合物趋于直立在相界面上,而多嵌段聚合物更容易横跨在相界面上并占据较大的界面积．从而导致多嵌段聚合物更有效的阻止体系相分离的发生．     

Small angle neutron scattering study of doxorubicin-surfactant complexes encapsulated in block copolymer micelles

Self-assembling behaviour of block copolymers and their ability to evade the immune system through polyethylene oxide stealth makes it an attractive candidate for drug encapsulation. Micelles formed by polyethylene oxide-polypropylene oxide- polyethylene oxide triblock copolymers (PEO-PPO-PEO), pluronic P123, have been employed for encapsulating the anti-cancer drug doxorubicin hydrochloride. The binding affinity of doxorubicin within the micelle carrier is enhanced through complex formation of drug and anionic surfactant, aerosol OT (AOT). Electrostatic binding of doxorubicin with negatively charged surfactants leads to the formation of hydrophobic drug-surfactant complexes. Surfactant-induced partitioning of the anti-cancer drug into nonpolar solvents such as chloroform is investigated. SANS measurements were performed on pluronic P123 micelles in the presence of drug-surfactant complex. No significant changes in the structure of the micelles are observed upon drug encapsulation. This demonstrates that surfactant- drug complexes can be encapsulated in block copolymer micelles without disrupting the structure of aggregates.      

受限于纳米孔的星型ABC三嵌段共聚物自组装形成核-壳-柱状相

在不同条件、不同形状与尺寸孔隙下,星型ABC三嵌段共聚物自组装形成的核-壳-柱状相的相行为,纳米结构形成与小孔几何形状有关,不同表面势能对星型ABC三嵌段共聚物的自组装过程有影响.