Sedimentation field-flow-fractionation: emergence of a new cell separation methodology

Field flow fractionation (FFF) methods were conceptualised in the late 1960s by J.C Giddings. These techniques are particularly suited for the retention and separation of micron and sub-micron sized particles. Systematic technological development as well as methodological procedures were established to achieve separations over the last 30 years. The elution mechanism of micron sized species is now known as 'steric/hyperlayer'. Cells are micron sized particles of life science interest, in particular those living in suspension. The separation of cells according to differences in their biophysical characteristics is therefore possible using the FFF principle. In the first part of this report, characteristics of classical cell separation methodologies are recounted as well as the specific features of FFF. In the second part, a review of cell separations or purifications obtained with sedimentation FFF techniques is given and FFF trends in cell separation is developed.     

Generic method for systematic phase selection and method development of biochromatographic processes. Part I. Selection of a suitable cation-exchanger for the purification of a pharmaceutical protein

Even if the first protein therapeutics are now for more than 20 years on the market the selection of suitable adsorbents for the preparative downstream processing (DSP) of these biomolecules as well as the method development towards process conditions are still based mainly on 'trial and error'. Therefore, theses processes are not perfectly efficient, but indeed very time consuming and laborious. In this study a novel systematic method is introduced to find a suitable adsorbent (not necessarily the best one) with appropriate separation parameters for a specific separation with reduced effort. Following this strategy, the adsorbents must first be packed into columns under preparative conditions and then characterized completely with regard to, e.g. pressure drop, k'-values, plate heights (HETP curves), selectivity and capacity by using test substances, which are similar in their characteristics (molecular mass, size, charge distribution, hydrophobicity) to the target proteins. With the database once determined, a preselection of most suitable adsorbents including separation parameters is made regarding chromatographic and also economical properties. After this, preparative experiments must be conducted with a reduced number of adsorbents to figure out the individual influence of side components. This approach is demonstrated for the separation of an exemplary industrial protein mixture using cation-exchange chromatography (CEX). Characterization of different weak CEX-adsorbents is illustrated. After comparing these phases with each other, a first preselection and a prediction of suitable adsorbents is made. In the following preparative separation conditions (load, velocity, gradient) are determined for the preparative separations using the database and results of some additional experiments. The final comparison of separation performance in preparative scale confirms this selection and so the applicability of the new method.     

Advances in field-flow fractionation for the analysis of biomolecules: instrument design and hyphenation

Field-flow fractionation (FFF) separates analytes by use of an axial channel-flow and a cross-field. Its soft separation capability makes it an ideal tool for initial fractionation of complex mixtures, but large elution volumes and high flow rates have limited its applicability without significant user handling. Recent advances in instrumentation and miniaturization have successfully reduced channel size and elution speed, and thus the volume of each fraction, making it possible to conveniently couple FFF with orthogonal separation techniques for improved resolution. More detailed analysis can also be performed on the fractions generated by FFF by use of diverse analytical techniques, including MS, NMR, and even X-ray scattering. These developmental trends have given FFF more power in the analysis of different types of molecule, and will be the direction of choice for further advances in FFF technology.     

Separation of glycoprotein-N-glycans by high-pH anion-exchange chromatography

A series of high-mannose and complex type glycoprotein-N-glycans was subjected to high-pH anion-exchange chromatography. The results revealed that this method represents a useful tool for analytical characterization of single oligosaccharides as well as preparative separation of complex mixtures of carbohydrate side-chains. On the other hand, it became evident that in several cases a combination of different chromatographic techniques is required for efficient separation of individual oligosaccharide species.     

Asymmetrical flow field-flow fractionation technique for separation and characterization of biopolymers and bioparticles

Field-flow fractionation (FFF) is one of the most versatile separation techniques in the field of analytical separation sciences, capable of separating macromolecules in the range 10³–10¹⁵ g mol⁻¹ and/or particles with 1 nm–100 μm in diameter. The most universal and most frequently used FFF technique, flow FFF, includes three types of techniques, namely symmetrical flow FFF, hollow fiber flow FFF, and asymmetrical flow FFF which is most established variant among them. This review provides a brief look at the theoretical background of analyte retention and separation efficiency in FFF, followed by a comprehensive overview of the current status of asymmetrical flow FFF with selected applications in the field of biopolymers and bioparticles.     

无固定相分离-电感耦合等离子体质谱法在环境中痕量金属纳米颗粒分析中的应用

环境中金属纳米颗粒的分析检测不仅需要关注其浓度和化学组成,还需要对其形状、粒径和表面电荷等进行表征。此外,环境中金属纳米颗粒的分析需要解决其低赋存浓度以及复杂基质干扰的难题。无固定相分离技术与电感耦合等离子体质谱(ICP-MS)的在线联用,具有较强的颗粒分离能力和较低的元素检出限,能够快速准确地提供金属纳米颗粒的粒径分布、化学组成等信息,在金属纳米颗粒的分离检测方面表现出极大的潜能。但这一联用技术尚无法获得金属纳米颗粒物的颗粒数浓度和单个颗粒的元素信息,难以判断金属纳米颗粒涂层厚度、纯度以及颗粒的均相/异相团聚行为等。新兴的单颗粒-电感耦合等离子体质谱(SP-ICP-MS)与无固定相分离技术的在线联用,可以获得金属纳米颗粒的流体动力学粒径、元素质量计算粒径和颗粒数浓度等信息,进而弥补无固定相分离与ICP-MS在线联用技术的不足。该文介绍了流体动力色谱、毛细管电泳和场流分离3种常用无固定相分离技术的分离机制和适用检测器,着重综述了无固定相分离技术与ICP-MS/SP-ICP-MS在线联用技术的特点及其在环境金属纳米颗粒分析中的应用。关于场流分离,主要介绍了可以与ICP-MS联用的沉降场流分离和流场流分离。该文还对流体动力色谱、毛细管电泳和流场流分离与ICP-MS在线联用技术的特点进行了比较。最后,该文对无固定相分离技术与ICP-MS/SP-ICP-MS在线联用技术的发展提出了展望。     

Simulated moving bed chromatography for the separation of enantiomers

Simulated moving bed (SMB) chromatography, a continuous multi-column chromatographic process, has become one of the preferred techniques for the separation of the enantiomers of a chiral compound. Several active pharmaceutical ingredients, including blockbuster drugs, are manufactured using the SMB technology. Compared to single column preparative chromatography, SMB separations achieve higher productivity and purity, while reducing the solvent consumption. The SMB technology has found applications both at small and large scales. Design methods have been developed for robust operation and scale-up, using data obtained from analytical experiments. In the last few years, rapid developments have been made in the areas of design, improved process schemes, optimization and robust control. This review addresses these developments, as well as both the fundamentals of the SMB science and technology and some practical issues concerning the operation of SMB units. Particular emphasis is placed on the consolidation of the “triangle theory”, a design tool that is used both in the academia and industry for the design of SMB processes.     

Quality criteria for residue analysis and reference materials. Relationship between legal procedures and materials

Summary For qualitative results objective reliability checks are often not present at all or applicable. Interlaboratory ring testing of methods, as sometimes required, showed often not to be applicable simply because enough adequate laboratories are not available. For instance this situation applied to the large number of methods of unclear reliability status, to be used for residue monitoring of hormonal growth promotors (anabolic agents), which are completely banned within the European Communities since January 1988. This impasse was circumvented in 1987 with the formulation by an international group of analytical experts of a set of quality criteria for common analytical techniques like TLC, GC and HPLC (separation), UV, MS and IR spectrometry (detection) and immunoassays (separation and detection). These criteria, now published, are overviewed, as well as the availability of the control and reference materials belonging to them for actual analytical quality control and for validation of laboratories. Although developed for anabolic agents this new approach is applicable in practice for nearly all organic analytes and since very recently also for heavy metals. This approach has clear consequences for the mandatory quality of legislative residue analyses of food stuffs. As based on, amongst others, the combined experience of regulatory residue chemists within the EC, a collection of experimental selectivity indices is presented to rank the required specificity of regulatory residue methods (ranging from within laboratory orientation to international forensic purposes) in an objective way. Finally an estimate is summarized of the financial consequences of the applicable analytical techniques.     

Computer simulation of particle separation based on non-equilibrium swelling

Steric/hyperlayer field-flow fractionation (FFF) is an established analytical technique for separating and characterizing particles in the 1-100 microns diameter range. The separation can be based on differences in size, density, shape and mechanical properties of the particles. In the course of an analysis of the water transporter system of Chinese hamster ovary (CHO) cells and one of their high permeability mutants, the first successful attempt was made to use the steric/hyperlayer FFF system for the purpose of separating particles based on a time-dependent property, namely, the differential swelling of the two cell types. The present study was undertaken to simulate numerically the separation and suggest selection of operating conditions to minimize repetitive experiments. The computer simulation was developed using Maple V, a symbolic computing environment. It is shown that the model is able to predict an optimal velocity of carrier buffer that maximizes resolution. Predicted velocity/resolution pairs are in good agreement with available experimental data. Empirical models for the lift forces encountered in such FFF experiments, and for the zone broadening observed in work with cell sized particles, form the basis for this model.     

Separation and characterization of nanoparticles in complex food and environmental samples by field-flow fractionation

The thorough analysis of natural nanoparticles (NPs) and engineered NPs involves the sequence of detection, identification, quantification and, if possible, detailed characterization. In a complex or heterogeneous sample, each step of this sequence is an individual challenge, and, given suitable sample preparation, field-flow fractionation (FFF) is one of the most promising techniques to achieve relevant characterization.The objective of this review is to present the current status of FFF as an analytical separation technique for the study of NPs in complex food and environmental samples. FFF has been applied for separation of various types of NP (e.g., organic macromolecules, and carbonaceous or inorganic NPs) in different types of media (e.g., natural waters, soil extracts or food samples).FFF can be coupled to different types of detectors that offer additional information and specificity, and the determination of size-dependent properties typically inaccessible to other techniques. The separation conditions need to be carefully adapted to account for specific particle properties, so quantitative analysis of heterogeneous or complex samples is difficult as soon as matrix constituents in the samples require contradictory separation conditions. The potential of FFF analysis should always be evaluated bearing in mind the impact of the necessary sample preparation, the information that can be retrieved from the chosen detection systems and the influence of the chosen separation conditions on all types of NP in the sample. A holistic methodological approach is preferable to a technique-focused one.     

High-resolution thin-layer chromatography of gangliosides

In this review an updated overview of current improvements on thin-layer chromatography (TLC) of gangliosides over the past decade is provided. Basic general techniques and special advice is given for successful separation of glycosphingolipids. New approaches concerning continuous and multiple development, and several preparative TLC methods are also included. Emphasis is placed on TLC immunostaining and related techniques, i.e. practical applications of carbohydrate-specific antibodies, toxins and bacteria, viruses, lectins and eukaryotic cells. Thus, this review on ganglioside TLC summarizes its power as an analytical tool for a wide range of purposes.     

Präparative Hochdruck-Säulenflüssigkeits-Chromatographie

Several aspects of the apparatus and column technology of modern preparative column liquid chromatography are described together with a review of the present state of the art. We can state: one can today so construct and fill preparative high-speed columns that the separation and isolation of individual components from mixtures in quantities sufficient for tentative identification (spectroscopic and CHN analysis c. 1 mg), structural elucidation, or mechanical, physical, electrical and last but not least, biological tests (ca. 100 mg) is possible. Additionally, by optimal use of “scale up” columns one can provide an additional tool, which may be used for research and development on the gram scale and may be described as a modern time- and money-saving technique. Unfortunately, up until now, only few systematic studies and applications which make full use of the preparative possibilities of modern column chromatography have been published. Only a few of the instrument manufacturers and accessory suppliers are active in this area. For this reason, compared to the rate of development in analytical aspects, the development of commercial preparative equipment is less well advanced. There remain, therefore, several questions open regarding apparatus and operation of such preparative columns, e.g. batch versus continuous operation, or maximum attainable diameter of columns.     

Supercritical fluid chromatography as a tool for enantioselective separation; A review

Supercritical fluid chromatography (SFC) has become popular in the field of enantioselective separations. Many works have been reported during the last years. This review covers the period from 2000 till August 2013. The article is divided into three main chapters. The first one comprises a basic introduction to SFC. The authors provide a brief explanation of general principles and possibilities of this method. The advantages and drawbacks are also listed. Next part deals with chiral separation systems available in SFC, namely with the commonly used chiral stationary phases. Properties and interaction possibilities of the chiral separation systems are described. Recent theoretical papers are emphasized in this chapter. The last part of the paper gives an overview of applications of enantioselective SFC in analytical chemistry, in both analytical and preparative scales. Separation systems and conditions are summed up in tables so that they provide a helpful tool for analysts who search for a particular method of analysis.     

Improvement of an overloaded, multi-component, solvent gradient bioseparation through multiobjective optimization

Solvent gradient chromatography is quite often used in analytical studies for decreasing the analysis time of samples having components with widely different retention behaviour. Several studies, both theoretical and experimental, have been reported on the optimization of gradient profiles in improving analytical separation performance, suggesting various linear and non-linear gradients. In preparative chromatography, on the other hand, though solvent gradient is being increasingly used (especially in bioseparation) to improve the product yield and productivity, there is a dearth of literature and clearer understanding of the effect(s) of modifier gradients on the separation performance. For this, the gradients used in applications are of relatively simple profiles like step or linear gradients, obtained through hand optimization based on experience and intuition. Significant improvements, however, can be expected using the state-of-the art modelling of chromatographic processes and optimization routines running on widely available hi-speed desktop computers. In this work we are reporting such an optimization procedure to improve the purification of an industrial multi-component mixture, containing 65.8% of Calcitonin as the main product, in an overloaded reversed-phase column. The work comprises both theoretical simulations and their experimental validation using multilinear gradients as optimization variable. The study produced interesting insights for modifier gradient design, like using peak deformation of the target peptide to increase yield and productivity, and improved our understanding of the effect of modifier gradients in non-linear separations.     

Current and prospective applications of metal ion-protein binding

Since immobilized metal ion affinity chromatography (IMAC) was first introduced, several variants of this method and many other metal affinity-based techniques have been devised. IMAC quickly established itself as a highly reliable purification procedure, showing rapid expansion in the number of preparative and analytical applications while not remaining confined to protein separation. It was soon applied to protein refolding (matrix-assisted refolding), evaluation of protein folding status, protein surface topography studies and biosensor development. In this review, applications in protein processing are described of IMAC as well as other metal affinity-based technologies.     

Affinity processes realized on high-flow-through methacrylate-based macroporous monoliths

The technology for preparation of rigid macroporous polymers suggested in the late 1980s has become a powerful instrument for the development of a novel scientific and practical field. At present, monolithic stationary phases are widely used in the processes of bioseparation (chromatography), bioconversion (enzyme reactors) as well as in other processes based on interphase mass distribution (for example, solid phase peptide and oligonucleotide synthesis). Bioaffinity modes of suggested dynamic methods are very promising for their use in different analytical processes (immunological, ecological, medical and other types of analytical monitoring), preparative isolation of blood proteins such as myoglobin, hemoglobin, immunoglobulins, etc. and also recombinant products directly from cell supernatants or lysates. For the first time, it has been shown that bioaffinity pairing with participation of immobilized on carefully designed rigid supports is very fast and the whole process of affinity separation can be realized within second time scale. The principle of bioaffinity recognition is generaly at the construction of biological reactors (for example, enzyme reactors). Improved kinetics of biocatalized reactions is explained by a minimal influence on the surface of the used sorbent. Very perspective field is the use of discussed monoliths for solid phase chemical synthesis of fragments of biological macromolecules (peptides and oligonucleotides). Several examples of these applications will be presented and discussed.     

Two-dimensional preparative liquid chromatography system for preparative separation of minor amount components from complicated natural products

An on-line comprehensive two-dimensional preparative liquid chromatography system was developed for preparative separation of minor amount components from complicated natural products. Medium-pressure liquid chromatograph (MPLC) was applied as the first dimension and preparative HPLC as the second one, in conjunction with trapping column and makeup pump. The performance of the trapping column was evaluated, in terms of column size, dilution ratio and diameter-height ratio, as well as system pressure from the view of medium pressure liquid chromatograph. Satisfactory trapping efficiency can be achieved using a commercially available 15 mm × 30 mm i.d. ODS pre-column. The instrument operation and the performance of this MPLC × preparative HPLC system were illustrated by gram-scale isolation of crude macro-porous resin enriched water extract of Rheum hotaoense. Automated multi-step preparative separation of 25 compounds, whose structures were identified by MS, ¹H NMR and even by less-sensitive ¹³C NMR, could be achieved in a short period of time using this system, exhibiting great advantages in analytical efficiency and sample treatment capacity compared with conventional methods.     

Investigating peak dispersion in free-flow counterflow gradient focusing

Free-flow electrophoresis (FFE) enables the continuous separation and collection of charged solutes, and as a result, it has drawn interest as both a preparative and an analytical tool for biological applications. Recently, a free-flow counterflow gradient focusing (FF-CGF) mechanism has been proposed with the goal of improving the resolution and versatility of FFE. To realize this potential, the factors that influence solute dispersion deserve further attention, including the gradient strength and the parabolic profile of the counterflow. Therefore, the goal of this work is to develop a theoretical model to study the interplay between these factors and molecular diffusion. Overall, an asymmetric solute distribution emerges for a wide range of parameters, and this behavior can be characterized with an exponentially modified Gaussian function. Results show that FF-CGF can achieve high-resolution separations, with the potential for high-throughput protein purification. Moreover, this work provides a practical guide for optimizing experimental conditions, as well as a strong framework for understanding and developing FF-CGF further.     

Rapid prediction and optimization of concentration conditions for preparative fractions by solid-phase extraction

SPE is an effective tool for concentrating preparative fractions isolated from a complex sample. To guarantee high efficiency and recovery of concentration, the concentration conditions could be optimized by predicting the breakthrough volume (V(B)). In this study, a method of predicting V(B )of unknown compounds in preparative fractions at any isocratic mobile phase composition with the analytical retention parameters a and c is described. The a and c values and the relationship between half peak width (W(1/2)) and retention time of a model analyte were measured using the analytical elution mode on an SPE column, and the V(B )and retention volume (V(R)) predicted with the a and c values were validated with breakthrough experiments. However, it is impossible to measure the a and c values of multiple compounds in a complex system directly on an SPE column with a low number of theoretical plates. The correlation of the a and c values between the SPE and analytical columns was developed so that the analytical data could be transferred to the SPE column. With the calculated a and c values, we could optimize the concentration conditions on the basis of the predicted V(B )and the volume of the preparative fraction.     

Osmolarity effects on red blood cell elution in sedimentation field-flow fractionation.

Field-flow fractionation (FFF) is an analytical technique particularly suitable for the separation, isolation, and characterization of macromolecules and micrometer- or submicrometer-sized particles. This chromatographic-like methodology can modulate the retention of micron-sized species according to an elution mode described to date as "steric hyperlayer". In such a model, differences in sample species size, density, or other physical parameters make particle selective elution possible depending on the configuration and the operating conditions of the FFF system. Elution characteristics of micron-sized particles of biological origin, such as cells, can be modified using media and carrier phases of different osmolarities. In these media, a cells average size, density, and shape are modified. Therefore, systematic studies of a single reference cell population, red blood cells (RBCs), are performed with 2 sedimentation FFF systems using either gravity (GrFFF) or a centrifugational field (SdFFF). However, in all cases, normal erythrocyte in isotonic suspension elutes as a single peak when fractionated in these systems. With carrier phases of different osmolarities, FFF elution characteristics of RBCs are modified. Retention modifications are qualitatively consistent with the "steric-hyperlayer" model. Such systematic studies confirm the key role of size, density, and shape in the elution mode of RBCs in sedimentation FFF for living, micronsized biological species. Using polymers as an analogy, the RBC population is described as highly "polydisperse". However, this definition must be reconsidered depending on the parameters under concern, leading to a matricial concept: multipolydispersity. It is observed that multipolydispersity modifications of a given RBC population are qualitatively correlated to the eluted sample band width.