Effect of the immobilisation of DNA aptamers on the detection of thrombin by means of surface plasmon resonance

We report a multichannel surface plasmon resonance (SPR) sensor for detection of thrombin via DNA aptamers immobilized on the SPR sensor surface. A detailed investigation of the effect of the immobilisation method on the interaction between thrombin and DNA aptamers is presented. Three basic approaches to the immobilisation of aptamers on the surface of the SPR sensor are examined: (i) immobilisation based on chemisorption of aptamers modified with SH groups, (ii) immobilisation of biotin-tagged aptamers via previously immobilized avidin, neutravidin or streptavidin molecular linkers, and (iii) immobilisation employing dendrimers as a support layer for subsequent immobilisation of aptamers. A level of nonspecific binding of thrombin to immobilized human serum albumin (HSA) for each of the immobilisation methods is determined. Immobilisation of aptamers by means of the streptavidin–biotin system yields the best results both in terms of sensor specificity and sensitivity.     

Surface plasmon resonance spectroscopy study of interfacial binding of thrombin to antithrombin DNA aptamers

We have applied surface plasmon resonance (SPR) spectroscopy, in combination with one-step direct binding, competition, and sandwiched assay schemes, to study thrombin binding to its DNA aptamers, with the aim to further the understanding of their interfacial binding characteristics. Using a 15-mer aptamer that binds thrombin primarily at the fibrinogen-recognition exosite as a model, we have demonstrated that introducing a DNA spacer in the aptamer enhances thrombin-binding capacity and stability, as similarly reported for hydrocarbon linkers. The bindings are aptamer surface coverage and salt concentration dependent. When free aptamers or DNA sequences complementary to the immobilized aptamer are applied after the formation of thrombin/aptamer complexes, bound thrombin is displaced to a certain extent, depending on the stability of the complexes formed under different conditions. When the 29-mer aptamer (specific to thrombin's heparin-binding exosite) is immobilized on the surface, its affinity to thrombin appears to be lower than the immobilized 15-mer aptamer, although the 29-mer aptamer is known to have a higher affinity in the solution phase. These findings underline the importance of aptamers' ability to fold into intermolecular structures and their accessibility for target capture. Using a sandwiched assay scheme followed by an additional signaling step involving biotin-streptavidin chemistry, we have observed the simultaneous binding of the 15- and 29-mer aptamers to thrombin protein at different exosites and have found that one aptamer depletes thrombin's affinity to the other when they bind together. We believe that these findings are invaluable for developing DNA aptamer-based biochips and biosensors.     

Aptasensor for Thrombin Based on Carbon Nanotubes‐Methylene Blue Composites

The amperometric and EQCM aptasensors based on DNA aptamers immobilized by avidin‐biotin method or by electrostatic adsorption onto multiwalled carbon nanotube layer contained methylene blue (MB) have been developed and examined for thrombin detection in buffer and in spiked blood serum. The presence of MB increases the binding capacity of the surface layer and enhances the range of thrombin concentrations to be determined. This results in significant improvement of analytical characteristics of thrombin detection. The EQCM aptasensors allowed us to detect 0.3–100 nM and amperometric aptasensors 10–1000 nM of thrombin.     

Single-Round DNA Aptamer Selection by Combined Use of Capillary Electrophoresis and Next Generation Sequencing: An Aptaomics Approach for Identifying Unique Functional Protein-Binding DNA Aptamers

In DNA aptamer selection, existing methods do not discriminate aptamer sequences based on their binding affinity and function and the reproducibility of the selection is often poor, even for the selection of well-known aptamers like those that bind the commonly used model protein thrombin. In the present study, a novel single-round selection method (SR-CE selection) was developed by combining capillary electrophoresis (CE) with next generation sequencing. Using SR-CE selection, a successful semi-quantitative and semi-comprehensive aptamer selection for thrombin was demonstrated with high reproducibility for the first time. Selection rules based on dissociation equilibria and kinetics were devised to obtain families of analogous sequences. Selected sequences of the same family were shown to bind thrombin with high affinity. Furthermore, data acquired from SR-CE selection was mined by creating sub-libraries that were categorized by the functionality of the aptamers (e. g., pre-organized aptamers versus structure-induced aptamers). Using this approach, a novel fluorescent molecular recognition sensor for thrombin with nanomolar detection limits was discovered. Thus, in this proof-of-concept report, we have demonstrated the potential of a “DNA Aptaomics” approach to systematically design functional aptamers as well as to obtain high affinity aptamers.     

On-chip graphene oxide aptasensor for multiple protein detection

The versatility of an on-chip graphene oxide (GO) aptasensor was successfully confirmed by the detection of three different proteins, namely, thrombin (TB), prostate specific antigen (PSA), and hemagglutinin (HA), simply by changing the aptamers but with the sensor composition remaining the same. The results indicate that both DNA and RNA aptamers immobilized on the GO surface are sufficiently active to realize an on-chip aptasensor. Molecular selectivity and concentration dependence were investigated in relation to TB and PSA detection by using a dual, triple, and quintuple microchannel configuration. The multiple target detection of TB and PSA on a single chip was also demonstrated by using a 2 × 3 linear-array GO aptasensor. This work enables us to apply this sensor to the development of a multicomponent analysis system for a wide variety of targets by choosing appropriate aptamers.     

A Colorimetric Biosensing Platform with Aptamers,Rolling Circle Amplification and Urease-Mediated Litmus Test

Here we report on an ultra-sensitive colorimetric sensing platform that takes advantage of both the strong amplification power of rolling circle amplification (RCA) and the high efficiency of a simple urease-mediated litmus test. The presence of a target triggers the RCA reaction, and urease-labelled DNA can hybridize to the biotinylated RCA products and be immobilized onto streptavidin-coated magnetic beads. The urease-laden beads are then used to hydrolyze urea, leading to an increase in pH that can be detected by a simple litmus test. We show this sensing platform can be easily integrated with aptamers for sensing diverse targets via the detection of human thrombin and platelet-derived growth factor (PDGF) utilizing structure-switching aptamers as well as SARS-CoV-2 in human saliva using a spike-binding trimeric DNA aptamer. Furthermore, we demonstrate that this colorimetric sensing platform can be integrated into a simple paper-based device for sensing applications.     

Study on an electrochemical biosensor for thrombin recognition based on aptamers and nano particles

This paper presents a high specific, sensitive electrochemical biosensor for recognition of protein such as thrombin based on aptamers and nano particles. Two different aptamers were chosen to construct a sandwich manner for detecting thrombin. Aptamer I was immobilized on nano magnetic particle for capturing thrombin, and aptamer II labled with nano gold was used for detection. The electrical current generated from gold after the formation of the complex of magnetic particle, thrombin and nano gold, and then an electrochemical cell designed by ourselves was used for separating, gathering, and electrochemical detecting. Through magnetic separation, high specific and sensitive detection of the target protein, thrombin, was achieved. Linear response was observed over the range 5.6×10-12―1.12×10-9 mol/L, with a detection limit of 1.42×10-12 mol/L. The presence of other protein as BSA did not affect the detection, which indicates that high selective recognition of thrombin can be achieved in complex biological samples such as human plasma.     

Aptamer-based detection of thrombin by acoustic method using DNA tetrahedrons as immobilisation platform

The thickness shear mode acoustic method was used to study the binding of thrombin to DNA aptamers immobilised on the gold surface covered by DNA tetrahedrons. The binding of thrombin to conventional aptamers sensitive to fibrinogen (FBT) and heparin (HPT) exosites as well as to HPT in a loop configuration (HPTloop) made it possible to determine the constant of dissociation (K_D) and the limit of detection (LOD). The sensing system composed of a HPTloop was characterised by K_D = (66.7 ± 22.7) nM, which was almost twice as low as that of FBT and HPT. For this biosensor, a lower LOD of 5.2 nM compared with 17 nM for conventional HPT aptamers was also obtained. Less sensitive sensors based on FBT aptamers revealed an LOD of 30 nM which is in agreement with the lower affinity of these aptamers to thrombin in comparison with that of HPT. The surface concentration of DNA tetrahedrons was determined by the electrochemical method using [Ru(NH₃)₆]³⁺ as a redox probe. These experiments confirmed that the “step by step” method of forming the sensing layer, consisting first in chemisorption of DNA tetrahedrons onto a gold surface and then in hybridisation of the aptamer-supporting part with complementary oligos at the top of the tetrahedron, is preferable. In addition, atomic force microscopy was applied to analyse the topography of the gold layers modified stepwise by DNA tetrahedrons, DNA aptamers and thrombin. The height profiles of the layers were in reasonable agreement with the dimensions of the adsorbed molecules. The results indicate that DNA tetrahedrons represent an efficient platform for immobilisation of aptamers.     

基于Ru(bpy)32+-SiO2纳米颗粒的核酸适配体传感器对凝血酶的电致化学发光检测

本文应用核酸适配体构建了一种新型的电致化学发光检测蛋白体系。两个核酸适配体结合凝血酶的两个不同位点,利用这两核酸适配体与凝血酶的高亲和力构建三明治传感体系检测凝血酶。一个核酸适配体固定在金电极上用来捕获凝血酶,另一个标记有包裹电致化学发光活性物Ru(bpy)₃²⁺的二氧化硅纳米颗粒,用来检测电致化学发光信号。此核酸适配体传感器对凝血酶具有特异识别性,电致化学发光信号与凝血酶的浓度直接相关,非特异性识别的牛血红蛋白、牛血清白蛋白不干扰测定。由于在检测的核酸适配体上标记的纳米颗粒包裹有多个发光活性物,因此大大提高了发光效率和灵敏度,此法对凝血酶的线性响应范围为2.0 fmol•L^-1～2.0 pmol•L^-1,检测限可达1.0 fmol•L^-1。     

A electrochemiluminescence aptasensor for detection of thrombin incorporating the capture aptamer labeled with gold nanoparticles immobilized onto the thio-silanized ITO electrode

A novel electrochemiluminescence (ECL) aptasensor was proposed for sensitive and cost-effective detection of the target thrombin adopted an aptamer-based sandwich format. To detect thrombin, capture aptamers labeled with gold nanoparticles (AuNPs) were first immobilized onto the thio-silanized ITO electrode surface through strong Au-S bonds. After catching the target thrombin, signal aptamers tagged with ECL labels were attached to the assembled electrode surface. As a result, an AuNPs-capture-aptamer/thrombin/ECL-tagged-signal-aptamer sandwich type was formed. Treating the resulting electrode surface with tri-n-propylamine (TPA) and applying a swept potential to the electrode, ECL response was generated which realized the detection of target protein. Spectroscopy and electrochemical impedance techniques were used to characterize and confirm the fabrication of the ECL aptasensor. AuNPs amplification and smart sensor fabrication art were implemented for the sensitive and cost-effective detection purpose. Signal-to-dose curve excellently followed a sandwich format equation and could be used to quantify the protein, and the detection limit was estimated to be 10 nM. Other forms of thrombin such as β- and γ-thrombins had negligible response, which indicated a high specificity of α-thrombin detection. The aptasensor opened up new fields of aptamer applications in ECL domain, a highly sensitive technique, and had a promising perspective to be applied in microarray analysis.     

Modified capillary electrophoresis based measurement of the binding between DNA aptamers and an unknown concentration target

The recognition of targets such as biomacromolecules, viruses and cells by their aptamers is crucial in aptamer-based biosensor platforms and research into protein function. However, it is difficult to evaluate the binding constant of aptamers and their targets that are hard to purify and quantify, especially when the targets are undefined. Therefore, we aimed to develop a modified capillary electrophoresis based method to determine the dissociation constant of aptamers whose targets are hard to quantify. A protein target, human thrombin, and one of its aptamers were used to validate our modified method. We demonstrated that the result calculated by our method, only depending on the aptamer’s concentrations, was consistent with the classical method, which depended on the concentrations of both the aptamers and the targets. Furthermore, a series of DNA aptamers binding with avian influenza virus H9N2 were confirmed by a four-round selection of capillary electrophoresis–systematic evolution of ligands by exponential enrichment, and we identified the binding constant of these aptamers by directly using the whole virus as the target with the modified method. In conclusion, our modified method was validated to study the interaction between the aptamer and its target, and it may also advance the evaluation of other receptor–ligand interactions.     

Stabilizing structure-switching signaling RNA aptamers by entrapment in sol-gel derived materials for solid-phase assays

Structure-switching, fluorescence-signaling DNA and RNA aptamers have been reported as highly versatile molecular recognition elements for biosensor development. While structure-switching DNA aptamers have been utilized for solid-phase sensing, equivalent RNA aptamers have yet to be successfully utilized in solid-phase sensors due to their lack of chemical stability and susceptibility to nuclease attack. In this study, we examined entrapment into sol-gel derived organic-inorganic composite materials as a platform for immobilization of structure-switching fluorescence-signaling RNA aptamer reporters, using both the synthetic theophylline- and naturally occurring thiamine pyrophosphate-binding RNA aptamers as test cases. Structure-switching versions of both aptamers were entrapped into a series of sol-gel derived composites, ranging from highly polar silica to hydrophobic methylsilsesquioxane-based materials, and the target-binding and signaling capabilities of these immobilized aptamers were assessed relative to solution. Both immobilized aptamers demonstrated sensitivity and selectivity similar to that of free aptamers when entrapped in a composite material derived from 40% (v/v) methyltrimethoxysilane/tetramethoxysilane. Importantly, this material also conferred protection from nuclease degradation and imparted long-term chemical stability to the RNA reporter systems. Given the versatility of sol-gel entrapment for development of biosensors, microarrays, bioaffinity columns, and other devices, this entrapment method should provide a useful platform for numerous solid-phase RNA aptamer-based devices.     

Aptamer-based silver nanosensor for multiple protein detection

In the present work we design a novel aptamer-based silver nanosensor for one-spot simultaneously detection of multiple proteins. SS-DNA modified AgNPs were immobilized on the aldehyde coated glass slide to form an AgNP array. Then dye-labeled aptamer sequences were allowed to hybridize with their complementary strands assembled on the surface of AgNPs. The target proteins were introduced to associate with the corresponding aptamers to form the aptamer-target complexes. The removal of the aptamer-target complexes resulted in a remarkable decrease in fluorescent signals. This nanosensor is found to be highly sensitive for the detection of proteins. When thrombin was employed as a sample model, the limit of detection of the optimized nanosenor was 0.4 fmol with a linear response of 0.8 fmol to 0.5 pmol. We further demonstrated the multiple protein detection of IgE and thrombin using multicolor silver nanoprobes, which shows effective recognition of the relative protein individually or simultaneously. This silver nanosensor offers a unique heterogeneous approach for protein detection with several advantages, such as high sensitivity, rapidity, high throughput, and miniaturization.     

A simple and rapid approach for measurement of dissociation constants of DNA aptamers against proteins and small molecules via automated microchip electrophoresis

Automated microchip electrophoresis was used as a simple and rapid method to measure effective dissociation constants (K(d,eff)) of aptamers against both large and small molecule targets. Human thrombin, immunoglobulin E (IgE), and adenosine triphosphate (ATP) were selected as model analytes to validate the method, with four ligands including two DNA aptamers for thrombin (two distinct epitopes), an IgE aptamer, and an ATP aptamer. The approach is based on a microchip version of a DNA mobility shift assay. Non-denaturing microchip gel electrophoresis separations of DNA could resolve and quantify unbound from target-bound aptamers when using large molecules as targets. To extend the technique to small molecule targets such as ATP, an aptamer/competitor strategy was used, in which a DNA competitor complementary to the aptamer could be displaced by ATP and electrophoretically resolved. Using an automated microchip electrophoresis platform, parallel separations of 11 titration samples were completed in ~0.5 h. Analytical performance comparisons show that our approach provides significant advantages in minimized reagent consumption (typically tens of pmol of aptamer and target), reduced analysis time, and minimized user interaction when compared to previously reported methods for aptamer K(d) measurement. Moreover, the flexibility and ease of K(d,eff) measurement for aptamers against large and small targets make this a unique and valuable approach that should find widespread use. Finally, the feasibility of using this method during aptamer selection processes (e.g. SELEX) was shown by accurate bulk K(d,eff) measurement of a known thrombin aptamer (THRaptA) spiked into a random-sequence DNA pool at as low as 5.0% (molar %) of the total pool; only ~825 fmol of total binding sequences were needed for an 11-point titration curve.     

Time-resolved fluorescence aptamer-based sandwich assay for thrombin detection

In the present study, the authors report a novel sensitive method for the detection of thrombin using time-resolved fluorescence sensing platform based on two different thrombin aptamers. The thrombin 15-mer aptamer as a capture probe was covalently attached to the surface of glass slide, and the thrombin 29-mer aptamer was fluorescently labeled as a detection probe. A bifunctional europium complex was used as the fluorescent label. The introduction of thrombin triggers the two different thrombin aptamers and thrombin to form a sandwich structure. The fluorescence intensity is proportional to the thrombin concentration. The present sensing system could provide both a wide linear dynamic range and a low detection limit. The proposed sensing system also presented satisfactory specificity and selectivity. Results showed that thrombin was retained at the aptamer-modified glass surface while nonspecific proteins were removed by rinsing with buffer solution. This approach successfully showed the suitability of aptamers as low molecular weight receptors on glass slides for sensitive and specific protein detection.     

利用互补核酸杂交富集金胶实现信号扩增的电化学凝血酶蛋白生物传感器研究

介绍了一种利用互补核酸杂交富集金胶实现信号扩增的蛋白质生物传感器. 以凝血酶蛋白为研究对象, 利用凝血酶蛋白相对应的两段核酸适配体, 将适配体Ⅰ固定在磁性颗粒上, 用于特异性地捕获蛋白, 将适配体Ⅱ标记金胶作为检测信标. 由凝血酶蛋白和相对应的两段核酸适配体构建三明治结构的凝血酶蛋白生物传感器. 另外, 再通过信标金胶上过剩的核酸适配体链与另一段标记有金胶的互补核酸进一步杂交, 获得金胶的选择性聚集, 实现了信号扩增. 通过信号扩增, 使此传感器的灵敏度大大提高, 对凝血酶蛋白的检测下限可达到4.52×10-15 mol/L. 平行测定浓度为7.47×10-14 mol/L的凝血酶8次, 其RSD为3.0%. 该生物传感器对凝血酶蛋白有很好的特异性, 其它蛋白如溶菌酶和牛血清白蛋白的存在对于检测没有影响.     

Biomolecular detection with a thin membrane transducer

We present a thin membrane transducer (TMT) that can detect nucleic acid based biomolecular reactions including DNA hybridization and protein recognition by aptamers. Specific molecular interactions on an extremely thin and flexible membrane surface cause the deflection of the membrane due to surface stress change which can be measured by a compact capacitive circuit. A gold-coated thin PDMS membrane assembled with metal patterned glass substrate is used to realize the capacitive detection. It is demonstrated that perfect match and mismatch hybridizations can be sharply discriminated with a 16-mer DNA oligonucleotide immobilized on the gold-coated surface. While the mismatched sample caused little capacitance change, the perfectly matched sample caused a well-defined capacitance decrease vs. time due to an upward deformation of the membrane by a compressive surface stress. Additionally, the TMT demonstrated the single nucleotide polymorphism (SNP) capabilities which enabled a detection of mismatching base pairs in the middle of the sequence. It is intriguing that the increase of capacitance, therefore a downward deflection due to tensile stress, was observed with the internal double mismatch hybridization. We further present the detection of thrombin protein through ligand-receptor type recognition with 15-mer thrombin aptamer as a receptor. Key aspects of this detection such as the effect of concentration variation are investigated. This capacitive thin membrane transducer presents a completely new approach for detecting biomolecular reactions with high sensitivity and specificity without molecular labelling and optical measurement.     

Assessment of aptamer-steroid binding using stacking-enhanced capillary electrophoresis

The binding affinity of 17β-estradiol with an immobilized DNA aptamer was measured using capillary electrophoresis. Estradiol captured by the immobilized DNA was injected into the separation capillary using pH-mediated sample stacking. Stacked 17β-estradiol was then separated using micellar electrokinetic capillary chromatography and detected with UV-visible absorbance. Standard addition was used to quantify the concentration of estradiol bound to the aptamer. Following incubation with immobilized DNA, analysis of free and bound estradiol yielded a dissociation constant of 70 ± 10 μM. The method was also used to screen binding affinity of the aptamer for estrone and testosterone. This study demonstrates the effectiveness of capillary electrophoresis to assess the binding affinity of DNA aptamers.     

Aptamers-based sandwich assay for silver-enhanced fluorescence multiplex detection

In this work, aptamers-modified silver nanoparticles (AgNPs) were prepared as capture substrate, and fluorescent dyes-modified aptamers were synthesized as detection probes. The sandwich assay was based on dual aptamers, which was aimed to accomplish the highly sensitive detection of single protein and multiplex detection of proteins on one-spot. We found that aptamers-modified AgNPs based microarray was much superior to the aptamer based microarray in fluorescence detection of proteins. The result shows that the detection limit of the sandwich assay using AgNPs probes for thrombin or platelet-derived growth factor-BB (PDGF-BB) is 80 or 8 times lower than that of aptamers used directly. For multiplex detection of proteins, the detection limit was 625 pM for PDGF-BB and 21 pM for thrombin respectively. The sandwich assay based on dual aptamers and AgNPs was sensitive and specific.