Molecular dynamics study of the coordination sphere of trivalent lanthanum in a highly concentrated LiCl aqueous solution: a combined classical and ab initio approach

The first coordination sphere of trivalent lanthanum in a highly concentrated (14 M) lithium chloride solution is studied with a combination of classical molecular dynamics and density functional theory based first principle molecular dynamics. This method enables us to obtain a solvation shell of La3+ containing 2 chloride ions and 6 water molecules. After refinement using first principle molecular dynamics, the resulting cation-water and cation-anion distances are in very good agreement with experiment. The 2Cl- and the 6 water molecules arrange in a square antiprism around La3+. Exchange of water molecules was also observed in the first-principle simulation, with an intermediate structure comprising 7 water molecules stable for 2.5 ps. Finally, evaluation of dipole moments using maximally localized Wannier functions shows a substantial polarization of the choride anions and the water molecules in the first solvation shell of trivalent lanthanum.     

Be2+在水、甲醇和乙醇中结构性质的从头算分子动力学模拟

采用Car-Parrinello分子动力学(CPMD)方法分别研究了Be²⁺在水、甲醇和乙醇中的溶剂结构性质, 并对Be²⁺的第一溶剂壳结构的实验及理论结果进行了比较. 所得第一溶剂壳结构与已报道的实验和理论结果较为一致. 对径向分布函数、配位数以及角度分布等进行了详细的分析. 结果表明: 在水、甲醇和乙醇中, Be²⁺第一溶剂壳为稳定理想的四面体结构. 在本文的模拟时间尺度内,没有观察到第一溶剂壳中的分子与第二溶剂壳中的分子进行交换, 进一步证明Be²⁺第一溶剂壳为稳定的四配位结构. 根据计算得到的空间分布函数, Be²⁺在溶剂分子的等高面上主要集中分布在溶剂分子接受氢键的方向. 根据氧原子在Be²⁺周围的分布, 壳层分子主要集中分布在Be²⁺周围的四个区域, 进一步证实溶剂壳为四面体对称.     

Solvation of Au+ versus Au0 in aqueous solution: electronic structure governs solvation shell patterns

The solvation behavior of Au(+) and Au(0) in liquid water under ambient conditions has been studied using ab initio molecular dynamics. The Au(+) aqua ion forms a rigid and well-defined quasi-linear structure in the sense of ligand field theory, where two water molecules are tightly bound to the gold cation through oxygen atoms ("cationic solvation"). Yet, transient charge accumulation in the direction perpendicular to the O-Au(+)-O linear core structure leads occasionally to the formation of a short Au(+)-H contact within the distance range of the first solvation shell, which is typical of "anionic solvation". Upon adding an electron to Au(+), the resulting solvation pattern of Au(0)(aq) has nothing in common with that of Au(+)(aq). Quite surprisingly we discover that the first solvation shell of Au(0)(aq) consists of a single water molecule and features both "anionic" and "cationic" solvation patterns depending on fluctuation and polarization effects. Thus, charging/decharging of metals dissolved in water, M(0)? M(+) + e(-), as occurring e.g. during elementary electrochemical steps, is expected to change dramatically their solvation behavior in the sense of re-solvation processes.     

Communication: Hydration structure and polarization of heavy alkali ions: A first principles molecular dynamics study of Rb(+) and Cs(+)

Hydration structure and polarization of Rb(+) and Cs(+) in liquid water at ambient conditions were studied by first principles molecular dynamics. Our systematic analysis of the relevant electronic structures, based on maximally localized Wannier functions, revealed that the dipole moment of H(2)O molecules in the first solvation shell of the ions slightly increases with increasing the atomic number. We also found that the polarization of heavy alkali ions, particularly Cs(+), tends to stabilize a peculiar asymmetric hydration structure with relevant consequences in the extraction of the harmful (137)Cs resulting from nuclear wastes.     

Structure and dynamics of the hydration shells of the Al3+ ion

First principles simulations of the hydration shells surrounding Al3+ ions are reported for temperatures near 300 degrees C. The predicted six water molecules in the octahedral first hydration shell were found to be trigonally coordinated via hydrogen bonds to 12 s shell water molecules in agreement with the putative structure used to analyze the x-ray data, but in disagreement with the results reported from conventional molecular dynamics using two-and three-body potentials. Bond lengths and angles of the water molecules in the first and second hydration shells and the average radii of these shells also agreed very well with the results of the x-ray analysis. Water transfers into and out of the second solvation shell were observed to occur on a picosecond time scale via a dissociative mechanism. Beyond the second shell the bonding pattern substantially returned to the tetrahedral structure of bulk water. Most of the simulations were done with 64 solvating water molecules (20 ps). Limited simulations with 128 water molecules (7 ps) were also carried out. Results agreed as to the general structure of the solvation region and were essentially the same for the first and second shell. However, there were differences in hydrogen bonding and Al-O radial distribution function in the region just beyond the second shell. At the end of the second shell a nearly zero minimum in the Al-O radial distribution was found for the 128 water system. This minimum is less pronounced minimum found for the 64 water system, which may indicate that sizes larger than 64 may be required to reliably predict behavior in this region.     

Structural and dynamic properties of water within the solvation layer around various conformations of the glycine-based polypeptide

Several conformations of the solvated glycine-based polypeptides were investigated using molecular dynamics simulations. Some properties of water in the neighboring space around these molecules were investigated. It was found that water forms a well-defined layer-the first solvation shell-around the peptide molecule, and thickness of this layer is independent of the peptide structure and is equal to approximately 0.28 nm. Within this layer, water molecules show marked orientations relative to a peptide surface. Using the two-particle contribution to entropy as a measure of structural ordering of water, we found that the first solvation shell contributes 95% or more to the total water ordering around the peptide molecule. In investigating the dynamic properties of water, diffusion coefficients and lifetime of the hydrogen bond, clear differences between solvation layer and the bulk water were observed. It was found that the translational diffusion coefficient, D(T), decreases by 30% or more compared to bulk water; also, the lifetime of the water-water hydrogen bond clearly increases. The rotational diffusion coefficient, however, decreases only slightly, no more than approximately 10%. These differences correspond to the slightly higher energy of the hydrogen bond, and to its slightly distorted geometry. Analyzing the translational dynamics of water in the vicinity of the peptide molecule, it was deduced that the structure of the first solvation shell becomes more rigid than the structure of the bulk water. Investigation of a "pure hydrophobic" form of the polypeptide shows that the structure and the properties of water within the solvation shell are predominantly determined by the hydrophobic effect. The specific interactions between water molecules and various charge groups of the peptide molecule modifies this effect only slightly.     

Density functional theory based molecular-dynamics study of aqueous iodide solvation

We study the solvation of iodide in water using density functional theory based molecular-dynamics simulations. Detailed analysis of the structural and dynamical properties of the first solvation shell is presented, showing a disruptive influence of the ion on the local water structure. Iodide-water hydrogen bonding is weak, compared to water-water hydrogen bonds. This effective repulsive ion-water interaction leads to the formation of a quite unstructured solvation shell. The dynamics of water molecules surrounding the iodide is relatively fast. The intramolecular structural and electronical properties of water molecules around the ion are not affected.     

Distorted five-fold coordination of Cu2+(aq) from a Car-Parrinello molecular dynamics simulation

The solvation shell structure and dynamics of a single Cu2+ ion in a periodic box with 32 water molecules under ambient conditions has been investigated using Car-Parrinello molecular dynamics simulations in a time-window of 18 ps. Five-fold coordination with four equidistant equatorial water molecules at 2.00 A and one axial water molecule at 2.45 A from the Cu2+ ion is found. A "hole" without water molecules is found on the opposite side of the axial water. The ion-water bonding character for the equatorial water molecules is different from that of the axial water molecules, as shown by a localized orbital analysis of the electronic structure. Moreover, the calculated OD stretching vibrational band for the equatorial water molecules lies ca. 175 cm-1 below the axial-water band, in good agreement with experimental data. The equatorial-water band lies below, and the axial-water band above, the pure liquid D2O band, also in agreement with experimental data.     

Speciation of the curium(III) ion in aqueous solution: a combined study by quantum chemistry and molecular dynamics simulation

The structures of aquo complexes of the curium(III) ion have been systematically studied using quantum chemical and molecular dynamics (MD) methods. The first hydration shell of the Cm3+ ion has been calculated using density functional theory (DFT), with and without inclusion of the conductor-like polarizable continuum medium (CPCM) model of solvation. The calculated results indicate that the primary hydration number of Cm3+ is nine, with a Cm-O bond distance of 2.47-2.48 A. The calculated bond distances and the hydration number are in excellent agreement with available experimental data. The inclusion of a complete second hydration shell of Cm3+ has been investigated using both DFT and MD methods. The presence of the second hydration shell has significant effects on the primary coordination sphere, suggesting that the explicit inclusion of second-shell effects is important for understanding the nature of the first shell. The calculated results indicate that 21 water molecules can be coordinated in the second hydration shell of the Cm3+ ion. MD simulations within the hydrated-ion model suggest that the second-shell water molecules exchange with the bulk solvent with a lifetime of 161 ps.     

Structural and dynamical analysis of the hydration of the Alzheimer's beta-amyloid peptide

An analysis of the water molecules in the first solvation shell obtained from the molecular dynamics simulation of the amyloid beta(10-35)NH2 peptide and the amyloid beta(10-35)NH2E22Q "Dutch" mutant peptide is presented. The structure, energetics, and dynamics of water in the hydration shell have been investigated using a variety of measures, including the hydrogen bond network, the water residence times for all the peptide residues, the diffusion constant, experimentally determined HN amide proton exchange, and the transition probabilities for water to move from one residue to another or into the bulk. The results of the study indicate that: (1) the water molecules at the peptide-solvent interface are organized in an ordered structure similar for the two peptide systems but different from that of the bulk, (2) the peptide structure inhibits diffusion perpendicular to the peptide surface by a factor of 3 to 5 relative to diffusion parallel to the peptide surface, which is comparable to diffusion of bulk water, (3) water in the first solvation shell shows dynamical relaxation on fast (1-2 ps) and slow (10-40 ps) time scales, (4) a novel solvent relaxation master equation is shown to capture the details of the fast relaxation of water in the peptide's first solvation shell, (5) the interaction between the peptide and the solvent is stronger in the wild type than in the E22Q mutant peptide, in agreement with earlier results obtained from computer simulations [Massi, F.; Straub, J. E. Biophys J 2001, 81, 697] correlated with the observed enhanced activity of the E22Q mutant peptide.     

Theoretical study of the solvation of HgCl2, HgClOH, Hg(OH)2 and HgCl3(-): a density functional theory cluster approach

The determination of the solvation shell of Hg(II)-containing molecules and especially the interaction between Hg(II) and water molecules is the first requirement to understand the transmembrane passage of Hg into the cell. We report a systematic DFT study by stepwise solvation of HgCl(2) including up to 24 water molecules. In order to include pH and salinity effects, the solvation patterns of HgClOH, Hg(OH)(2) and HgCl(3)(-) were also studied using 24 water molecules. In all cases the hydrogen bond network is crucial to allow orbital-driven interactions between Hg(II) and the water molecules. DFT Born-Oppenheimer molecular dynamics simulations starting from the stable HgCl(2)-(H(2)O)(24) structure revealed that an HgCl(2)-(H(2)O)(3) trigonal bipyramid effective solute appears and then the remaining 21 water molecules build a complete first solvation shell, in the form of a water-clathrate. In the HgCl(2), HgClOH, Hg(OH)(2)-(H(2)O)(24) optimized structures Hg also directly interacts with 3 water molecules from an orbital point of view (three Hg-O donor-acceptor type bonds). All the other interactions are through hydrogen bonding. The cluster-derived solvation energies of HgCl(2), HgClOH and Hg(OH)(2) are estimated to be -34.4, -40.1 and -47.2 kcal mol(-1), respectively.     

Nature of hydration shells of a polyoxy‐anion with a large cationic centre: The case of iodate ion in water

The structural nature of the solvation shells of an iodate ion, which is known to be a polyoxy‐anion with a large cationic centre, is investigated by means of Born–Oppenheimer molecular dynamics (BOMD) simulations using BLYP and the dispersion corrected BLYP‐D3 functionals. The iodate ion is found to have two distinct solvation regions around the positively charged iodine (iodine solvation shell or ISS) and the negatively charged oxygens (oxygen solvation shell or OSS). We have looked at the spatial, orientational, and hydrogen bond distributions of water in the two solvation regions. It is found that the water orientational profile in the ISS is typical of a cation hydration shell. The hydrogen bonded structure of water in the OSS is found to be very similar to that of the bulk water structure. Thus, the iodate ion essentially behaves like a positively charged iodine ion in water as if there is no anionic part. This explains why the cationic character of the iodate ion was prominently seen in earlier studies. The arrangement of water molecules in the two solvation shells and in the intervening regions around the iodate ion is further resolved by looking at structural cross‐correlations. The electronic properties of the solvation shells are also looked at by calculating the solute–solvent orbital overlap and dipole moments of the solute and solvation shell water. We have also performed BOMD simulations of iodate ion‐water clusters at experimentally relevant conditions. The simulation results are found to be in agreement with experimental results. © 2018 Wiley Periodicals, Inc.     

Structure and dynamics of hydrated NH(4) (+): an ab initio QM/MM molecular dynamics simulation

A combined ab initio quantum mechanical/molecular mechanical (QM/MM) molecular dynamics simulation has been performed to investigate solvation structure and dynamics of NH(4) (+) in water. The most interesting region, the sphere includes an ammonium ion and its first hydration shell, was treated at the Hartree-Fock level using DZV basis set, while the rest of the system was described by classical pair potentials. On the basis of detailed QM/MM simulation results, the solvation structure of NH(4) (+) is rather flexible, in which many water molecules are cooperatively involved in the solvation shell of the ion. Of particular interest, the QM/MM results show fast translation and rotation of NH(4) (+) in water. This phenomenon has resulted from multiple coordination, which drives the NH(4) (+) to translate and rotate quite freely within its surrounding water molecules. In addition, a "structure-breaking" behavior of the NH(4) (+) is well reflected by the detailed analysis on the water exchange process and the mean residence times of water molecules surrounding the ion.     

A first principles molecular dynamics study of lithium atom solvation in binary liquid mixture of water and ammonia: structural, electronic, and dynamical properties

The preferential solvation of solutes in mixed solvent systems is an interesting phenomenon that plays important roles in solubility and kinetics. In the present study, solvation of a lithium atom in aqueous ammonia solution has been investigated from first principles molecular dynamics simulations. Solvation of alkali metal atoms, like lithium, in aqueous and ammonia media is particularly interesting because the alkali metal atoms release their valence electrons in these media so as to produce solvated electrons and metal counterions. In the present work, first principles simulations are performed employing the Car-Parrinello molecular dynamics method. Spontaneous ionization of the Li atom is found to occur in the mixed solvent system. From the radial distribution functions, it is found that the Li(+) ion is preferentially solvated by water and the coordination number is mostly four in its first solvation shell and exchange of water molecules between the first and second solvation shells is essentially negligible in the time scale of our simulations. The Li(+) ion and the unbound electron are well separated and screened by the polar solvent molecules. Also the unbound electron is primarily captured by the hydrogens of water molecules. The diffusion rates of Li(+) ion and water molecules in its first solvation shell are found to be rather slow. In the bulk phase, the diffusion of water is found to be slower than that of ammonia molecules because of strong ammonia-water hydrogen bonds that participate in solvating ammonia molecules in the mixture. The ratio of first and second rank orientational correlation functions deviate from 3, which suggests a deviation from the ideal Debye-type orientational diffusion. It is found that the hydrogen bond lifetimes of ammonia-ammonia pairs is very short. However, ammonia-water H-bonds are found to be quite strong when ammonia acts as an acceptor and these hydrogen bonds are found to live longer than even water-water hydrogen bonds.     

Dependence of ion hydration on the sign of the ion's charge

The solvation of simple ions in water is studied using molecular dynamics simulations with a polarizable force field. Previous simulations using this potential demonstrated that anions are more favorably solvated in water than cations. The present work is an attempt to explain this result by examining the effects of ions on the surrounding water structure, with particular focus on the first solvation shell and its interactions with the surrounding water. We conclude that while the first solvation shell surrounding cations is frustrated by competition between ion-water and water-water interactions, solvation of anions is compatible with good water-water interactions.     

Probing the transition from hydrophilic to hydrophobic solvation with atomic scale resolution

Picosecond and femtosecond X-ray absorption spectroscopy is used to probe the changes of the solvent shell structure upon electron abstraction of aqueous iodide using an ultrashort laser pulse. The transient L(1,3) edge EXAFS at 50 ps time delay points to the formation of an expanded water cavity around the iodine atom, in good agreement with classical and quantum mechanical/molecular mechanics (QM/MM) molecular dynamics (MD) simulations. These also show that while the hydrogen atoms pointed toward iodide, they predominantly point toward the bulk solvent in the case of iodine, suggesting a hydrophobic behavior. This is further confirmed by quantum chemical (QC) calculations of I(-)/I(0)(H(2)O)(n=1-4) clusters. The L(1) edge sub-picosecond spectra point to the existence of a transient species that is not present at 50 ps. The QC calculations and the QM/MM MD simulations identify this transient species as an I(0)(OH(2)) complex inside the cavity. The simulations show that upon electron abstraction most of the water molecules move away from iodine, while one comes closer to form the complex that lives for 3-4 ps. This time is governed by the reorganization of the main solvation shell, basically the time it takes for the water molecules to reform an H-bond network. Only then is the interaction with the solvation shell strong enough to pull the water molecule of the complex toward the bulk solvent. Overall, much of the behavior at early times is determined by the reorientational dynamics of water molecules and the formation of a complete network of hydrogen bonded molecules in the first solvation shell.     

Solvation of tetraalkylammonium chlorides in acetonitrile-water mixtures: mass spectrometry and molecular dynamics simulations.

The solvation of tetramethylammonium chloride (Me4NCl) and tetra-n-butylammonium chloride (Bu4NCl) in water-acetonitrile mixtures was investigated by mass spectrometry of clusters isolated from the solution. As far as the positive ions are concerned, clusters composed of alkylammonium ions and acetonitrile molecules only were observed, even for mixtures with high water content. In contrast, for the negative ions, clusters composed of chloride with both water and/or acetonitrile molecules were observed. For the smaller system (Me4NCl) we performed quantum chemical calculations and molecular dynamics simulations. It was found that even though water is present in the solvation shell of Me4N+, only acetonitrile has a strong electrostatic interaction with the cation. Water molecules around Me4N+ form hydrogen bonds with other water molecules, and they interact with Me4N+ mainly via dispersive interactions. These results indicate that Me4N+ behaves like a hydrophobic solute. On the other hand, the interaction of Cl- with water and acetonitrile is of comparable strength and, in both cases, the electrostatic interaction dominates. Herein we demonstrate experimentally and theoretically that positive and negative ions give rise to characteristic solvation structures in mixed solvents: even a relatively small organic cation, such as Me4N+, exhibits a hydrophobic-like solvation shell.     

Excess protons in water-acetone mixtures

Using molecular dynamics experiments, we analyze equilibrium and dynamical characteristics related to the solvation of excess protons in water-acetone mixtures. Our approach is based on the implementation of an extended valence-bond Hamiltonian, which incorporates translocation of the excess charge between neighboring water molecules. Different mixtures have been analyzed, starting from the pure water case down to solutions with a water molar fraction x(w) = 0.25. In all cases, we have verified that the structure of the first solvation shell of the H(3)O(+) moiety remains practically unchanged, compared to the one observed in pure water. This shell is composed by three water molecules acting as hydrogen bond acceptors, with no evidence of hydrogen bond donor-like connectivity. Moreover, the increment in the acetone concentration leads to a gradual stabilization of Eigen-like [H(3)O[middle dot](H(2)O)(3)](+) configurations, in detriment of Zundel-like [H[middle dot](H(2)O)(2)](+) ones. Rates of proton transfer and proton diffusion coefficients have been recorded at various water-acetone relative concentrations. In both cases, we have found a transition region, in the vicinity of x(w) ～ 0.8, where the concentration dependences of the two magnitudes change at a quantitative level. A crude estimate shows that, at this tagged concentration, the volumes "occupied" by the two solvents become comparable. The origins of this transition separating water-rich from acetone-rich realms is rationalized in terms of modifications operated in the nearby, second solvation shell, which in the latter solutions, normally includes at least, one acetone molecule. Our results would suggest that one possible mechanism controlling the proton transfer in acetone-rich solutions is the exchange of one of these tagged acetone molecules, by nearby water ones. This exchange would give rise to Zundel-like structures, exhibiting a symmetric, first solvation shell composed exclusively by water molecules, and would facilitate the transfer between neighboring water molecules along the resonant complex.