Monte Carlo simulations of segregation in Pt-Re catalyst nanoparticles

We have investigated the segregation of Pt atoms to the surfaces of Pt-Re nanoparticles using the Monte Carlo method and modified embedded-atom method potentials that we have developed for Pt-Re alloys. The Pt(75)Re(25) nanoparticles (containing from 586 to 4,033 atoms) are assumed to have disordered fcc configurations and cubo-octahedral shapes (terminated by [111] and [100] facets), while the Pt(50)Re(50) and Pt(25)Re(75) nanoparticles (containing from 587 to 4,061 atoms) are assumed to have disordered hcp configurations and truncated hexagonal bipyramidal shapes (terminated by [0001] and [1011] facets). We predict that due to the segregation process the equilibrium Pt-Re nanoparticles would achieve a core-shell structure, with a Pt-enriched shell surrounding a Pt-deficient core. For fcc cubo-octahedral Pt(75)Re(25) nanoparticles, the shells consist of almost 100 at. % of Pt atoms. Even in the shells of hcp truncated hexagonal bipyramidal Pt(50)Re(50) nanoparticles, the concentrations of Pt atoms exceed 85 at. % (35 at. % higher than the overall concentration of Pt atoms in these nanoparticles). Most prominently, all Pt atoms will segregate to the surfaces in the hcp truncated hexagonal bipyramidal Pt(25)Re(75) nanoparticles containing less than 1000 atoms. We also find that the Pt atoms segregate preferentially to the vertex sites, less to edge sites, and least to facet sites on the shell of Pt-Re nanoparticles.     

Surface structures of cubo-octahedral Pt-Mo catalyst nanoparticles from Monte Carlo simulations

The surface structures of cubo-octahedral Pt-Mo nanoparticles have been investigated using the Monte Carlo method and modified embedded atom method potentials that we developed for Pt-Mo alloys. The cubo-octahedral Pt-Mo nanoparticles are constructed with disordered fcc configurations, with sizes from 2.5 to 5.0 nm, and with Pt concentrations from 60 to 90 atom %. The equilibrium Pt-Mo nanoparticle configurations were generated through Monte Carlo simulations allowing both atomic displacements and element exchanges at 600 K. We predict that the Pt atoms weakly segregate to the surfaces of such nanoparticles. The Pt concentrations in the surface are calculated to be 5-14 atom % higher than the Pt concentrations of the nanoparticles. Moreover, the Pt atoms preferentially segregate to the facet sites of the surface, while the Pt and Mo atoms tend to alternate along the edges and vertexes of these nanoparticles. We found that decreasing the size or increasing the Pt concentration leads to higher Pt concentrations but fewer Pt-Mo pairs in the Pt-Mo nanoparticle surfaces.     

Synergetic effect of surface and subsurface Ni species at Pt-Ni bimetallic catalysts for CO oxidation

Various well-defined Ni-Pt(111) model catalysts are constructed at atomic-level precision under ultra-high-vacuum conditions and characterized by X-ray photoelectron spectroscopy and scanning tunneling microscopy. Subsequent studies of CO oxidation over the surfaces show that a sandwich surface (NiO(1-x)/Pt/Ni/Pt(111)) consisting of both surface Ni oxide nanoislands and subsurface Ni atoms at a Pt(111) surface presents the highest reactivity. A similar sandwich structure has been obtained in supported Pt-Ni nanoparticles via activation in H(2) at an intermediate temperature and established by techniques including acid leaching, inductively coupled plasma, and X-ray adsorption near-edge structure. Among the supported Pt-Ni catalysts studied, the sandwich bimetallic catalysts demonstrate the highest activity to CO oxidation, where 100% CO conversion occurs near room temperature. Both surface science studies of model catalysts and catalytic reaction experiments on supported catalysts illustrate the synergetic effect of the surface and subsurface Ni species on the CO oxidation, in which the surface Ni oxide nanoislands activate O(2), producing atomic O species, while the subsurface Ni atoms further enhance the elementary reaction of CO oxidation with O.     

活性炭负载Pt-Ni双金属催化剂上甘油水溶液原位加氢反应性能

采用KBH4液相还原法制备了系列活性炭(AC)负载的Pt-M(M=Fe,Ni,Co,Zn,Cu)双金属催化剂,考察了该系列催化剂对甘油水溶液原位加氢制备1,2-丙二醇反应的催化性能.结果表明,当Pt负载量(质量分数)为2.0%,Pt/Ni质量比为1∶1时,在220℃和1.0 MPa氮气压力下反应8 h,2%Pt-2%Ni/AC催化剂上甘油转化率和1,2-丙二醇选择性分别达到98.7%和60.5%;且在5次重复使用过程中,催化剂保持较高的稳定性.采用氮气物理吸附-脱附实验、X射线衍射(XRD)、透射电子显微镜(TEM)、选区电子衍射(SAED)及X射线光电子能谱(XPS)等对催化剂的结构和形貌进行了表征.结果表明,粒径约为2 nm的纳米颗粒在活性炭载体上均匀分散,纳米粒子中金属多以还原态形式存在,Ni原子进入Pt晶格中形成的Pt-Ni物种使Pt与Ni之间表现出强相互作用力.通过比较Pt/AC,Ni/AC与Pt-Ni/AC双金属催化剂的催化性能,推断Pt能够促进甘油水溶液重整而Ni有利于氢解反应,Pt-Ni金属间协同作用是Pt-Ni/AC催化剂对甘油原位加氢反应具有优良催化性能的重要原因.     

A new simple preparation of platinum-nickel alloy nanoparticles and their characterization as an electrocatalyst for methanol oxidation

Pt-Ni alloy nanoparticles were produced by casting 2 or 10 mM H₂PtCl₆ solutions on a Ni column. The apparent particle size for the resultant Pt-Ni alloys increased with the concentration of the H₂PtCl₆ solution, while the content of Pt in the alloy decreased. The potential sweeps of 5 cycles in an H₂SO₄ aqueous solution for Pt-Ni (2 mM)/Ni and Pt-Ni (10 mM)/Ni electrodes led to electrochemical behavior similar to a polycrystalline Pt electrode, suggesting the formation of a few thin Pt layers on each Pt-Ni alloy surface. In electrochemical measurements, both Pt-Ni/Ni electrodes showed more negative onset potential of methanol oxidation and slower degradation of oxidation current of methanol than the polycrystalline Pt electrode. X-ray photoelectron spectroscopy of both Pt-Ni/Ni electrodes showed the shift of Pt4f peaks to a higher binding energy, suggesting that the increase in the d vacancy in the balance band 5d orbital of Pt contributed to the improved electrocatalytic activity and durability of the Pt-Ni/Ni electrodes.     

CMK-5负载Pt-Ni合金催化剂及其甲醇电化学氧化性能

采用NaBH₄还原法将不同原子比的铂镍负载于CMK-5(由SBA-15模板所得的碳载体)表面. X射线衍射(XRD)和X射线光电子能谱(XPS)测试结果表明, 所得催化剂是以铂镍合金的形式存在, 相对于Pt/CMK-5而言, 这种合金化的催化剂中Pt表现出更多的金属态. 电化学测试结果显示, 在催化剂中主要以化合态存在的镍(包括NiO、Ni(OH)₂和NiOOH)可能更有利于甲醇的吸附和氧化产物从催化剂表面的脱附. 另外, 从循环伏安测试结果可知, Pt-Ni/CMK-5 (5:1)(原子比)具有较大的比表面活性, 其电化学活性面积高达63.9 m²·g^-1, 且与Pt/CMK-5相比抗CO中毒能力有明显改善.     

Carbon-supported platinum-decorated nickel nanoparticles for enhanced methanol oxidation in acid media

Carbon-supported platinum-decorated nickel nanoparticles (denoted as Pt-Ni/C) with intimate contact of Pt and Ni are prepared by a galvanic displacement reaction between Ni/C nanoparticles and PtCl₆²⁻ in aqueous solution. It demonstrates a higher mass activity and stability to methanol oxidation reaction than conventional Pt/C and PtRu/C catalysts by a rotating disk electrode in acid solution, which could be attributed to the modified electronic structure of the Pt-Ni/C nanoparticles.     

电沉积制备的PtNi纳米粒子用于氧还原反应:成核和生长机理

质子交换膜燃料电池(PEMFCs)电堆中阴极Pt基催化剂的高用量造成其成本居高不下,成为阻碍燃料电池汽车商业化推进的重要原因,因此开发低Pt、高活性的Pt基催化剂势在必行.Pt合金催化剂能够有效地降低Pt用量,并通过对合金颗粒的元素比例、晶面、粒径等实行精确调控,显著提升氧还原(ORR)催化活性.然而,目前常用的制备方法由于原料与制备成本高昂、过程复杂大都难以适应规模化生产需求.电化学方法通过控制施加的电流或电位控制晶体生长.在水体系中该方法已得到验证,但由于Pt化合物的热力学标准电极电位与过渡金属元素之间相差较大,且对于过渡金属来说,电负性大多小于铂,因此还原电位通常负于析氢电位,使得二者难以实现共沉积.有机体系中电位窗口比水体系大得多,Pt与电位较负的过渡金属可实现共沉积,采用小分子有机溶剂也可避免溶剂清洗问题,具有应用潜力.本文提出了一种简单的一步电沉积方法,选择易溶于水的N,N-二甲基甲酰胺(DMF)作为溶剂,将碳载体滴涂到玻碳电极上作为工作电极,通过电化学方法直接将Pt-Ni合金沉积到碳载体上,并利用物化表征与密度泛函理论(DFT)理论计算来探究共沉积机理.透射电镜表征结果表明,在不同的沉积电位下均可得到分散均匀、粒径适当的催化剂;且随着电位值降低,催化剂颗粒分散得更均匀,颗粒粒径不断减小.元素分布和晶面结果表明,铂镍元素均匀分布于颗粒中.所有样品均表现出优异的ORR性能,最高的面积比活性达到商业催化剂的6.85倍.将材料表征、电化学表征与DFT计算结合,建立起了铂镍合金生长过程的模型,并发现了有机体系中独特的成核-生长机理.将体系中的DMF换成超纯水,用同样的方法进行沉积,得到的催化剂颗粒团聚严重,说明DMF的使用能够避免颗粒团聚.在单独铂的体系中沉积发现,负载量极小,表明体系中镍前驱体的添加对于催化剂的沉积过程起到重要作用.电化学表征结果表明,在所选用的DMF有机体系中,镍的还原电位与铂的十分接近,但还原动力学更慢,趋向于先形成吸附原子后快速还原.由此可以推测,在二者合金的形成过程中,镍在碳载体表面的缓慢还原而形成的吸附原子能够成为铂还原的活性位点,从而降低了铂还原成核所需的能量,使得载体上的成核位点大大增加,这与DFT模拟结果一致.DFT建立了碳上镍的位点和铂的位点,分别在上面进行铂的还原,发现镍位点上比铂位点上更容易实现铂沉积.本文提出了铂镍共沉积的机理:在过电位(即还原能量)下,铂的还原动力学较镍稍快,于是铂先还原形成晶核,但难以达到生长的临界半径,于是单独铂体系中的沉积负载量很少.载体上还原的镍为铂还原提供了大量的活性位点,促进了铂还原,并与镍共沉积.Pt-Ni表面则进一步促进了铂的沉积和颗粒的生长.综上,本文提出了一种用于制备铂合金催化剂的有机电沉积体系,实现了单分散的碳载铂镍合金催化剂的一步制备.随后,本文将材料表征、电化学表征与DFT计算相结合,建立起了有机体系中铂镍合金成核-生长过程的机理模型.     

电沉积制备的PtNi纳米粒子用于氧还原反应:成核和生长机理

质子交换膜燃料电池(PEMFCs)电堆中阴极Pt基催化剂的高用量造成其成本居高不下,成为阻碍燃料电池汽车商业化推进的重要原因,因此开发低Pt、高活性的Pt基催化剂势在必行.Pt合金催化剂能够有效地降低Pt用量,并通过对合金颗粒的元素比例、晶面、粒径等实行精确调控,显著提升氧还原(ORR)催化活性.然而,目前常用的制备方法由于原料与制备成本高昂、过程复杂大都难以适应规模化生产需求.电化学方法通过控制施加的电流或电位控制晶体生长.在水体系中该方法已得到验证,但由于Pt化合物的热力学标准电极电位与过渡金属元素之间相差较大,且对于过渡金属来说,电负性大多小于铂,因此还原电位通常负于析氢电位,使得二者难以实现共沉积.有机体系中电位窗口比水体系大得多,Pt与电位较负的过渡金属可实现共沉积,采用小分子有机溶剂也可避免溶剂清洗问题,具有应用潜力.本文提出了一种简单的一步电沉积方法,选择易溶于水的N,N-二甲基甲酰胺(DMF)作为溶剂,将碳载体滴涂到玻碳电极上作为工作电极,通过电化学方法直接将Pt-Ni合金沉积到碳载体上,并利用物化表征与密度泛函理论(DFT)理论计算来探究共沉积机理.透射电镜表征结果表明,在不同的沉积电位下均可得到分散均匀、粒径适当的催化剂;且随着电位值降低,催化剂颗粒分散得更均匀,颗粒粒径不断减小.元素分布和晶面结果表明,铂镍元素均匀分布于颗粒中.所有样品均表现出优异的ORR性能,最高的面积比活性达到商业催化剂的6.85倍.将材料表征、电化学表征与DFT计算结合,建立起了铂镍合金生长过程的模型,并发现了有机体系中独特的成核-生长机理.将体系中的DMF换成超纯水,用同样的方法进行沉积,得到的催化剂颗粒团聚严重,说明DMF的使用能够避免颗粒团聚.在单独铂的体系中沉积发现,负载量极小,表明体系中镍前驱体的添加对于催化剂的沉积过程起到重要作用.电化学表征结果表明,在所选用的DMF有机体系中,镍的还原电位与铂的十分接近,但还原动力学更慢,趋向于先形成吸附原子后快速还原.由此可以推测,在二者合金的形成过程中,镍在碳载体表面的缓慢还原而形成的吸附原子能够成为铂还原的活性位点,从而降低了铂还原成核所需的能量,使得载体上的成核位点大大增加,这与DFT模拟结果一致.DFT建立了碳上镍的位点和铂的位点,分别在上面进行铂的还原,发现镍位点上比铂位点上更容易实现铂沉积.本文提出了铂镍共沉积的机理:在过电位(即还原能量)下,铂的还原动力学较镍稍快,于是铂先还原形成晶核,但难以达到生长的临界半径,于是单独铂体系中的沉积负载量很少.载体上还原的镍为铂还原提供了大量的活性位点,促进了铂还原,并与镍共沉积.Pt-Ni表面则进一步促进了铂的沉积和颗粒的生长.综上,本文提出了一种用于制备铂合金催化剂的有机电沉积体系,实现了单分散的碳载铂镍合金催化剂的一步制备.随后,本文将材料表征、电化学表征与DFT计算相结合,建立起了有机体系中铂镍合金成核-生长过程的机理模型.     

Adsorption‐Induced Restructuring and Early Stages of Carbon‐Nanotube Growth on Ni Nanoparticles

Carbon adsorption on various Ni surfaces is investigated as a function of coverage via a combination of first‐principles simulations and field emission microscope experiments. It is found that carbon can be efficiently stored as subsurface carbides, but with different energetics on differently oriented surfaces depending on their compactness and density of adsorption sites. In the resulting morphological reshaping, {113} facets are predicted to grow at the expense of {111} and {100} facets, in excellent agreement with experimental observations. Moreover, at high coverage on the {113} surface the carbon adsorption energy passes through a maximum after which a structural crossover is realized such that carbon atoms tend to ascend to the surface to form one‐dimensional chains (which are the precursors of graphitic nanostructures). This rationalizes the experimental observation of an incubation time between carbon storage and the beginning of catalytic growth, and provides insight into the early stages (nucleation mechanism) of carbon nanotubes on Ni nanoparticles.     

Voltammetric surface dealloying of Pt bimetallic nanoparticles: an experimental and DFT computational analysis

Voltammetric dealloying of bimetallic platinum-copper (Pt-Cu) alloys has been shown to be an effective strategy to modify the surface electrocatalytic reactivity of Pt bimetallic nanoparticles (S. Koh and P. Strasser, J. Am. Chem. Soc., 2007, 129, 12624). Using cyclic voltammetry and structural XRD studies, we systematically characterize the Pt-Cu precursor compounds as well as the early stages of the selective Cu surface dissolution (dealloying) process for Pt(25)Cu(75), Pt(50)Cu(50), and Pt(75)Cu(25) alloy nanoparticles annealed at both low and high temperature. We also assess the impact of the synthesis conditions on the electrocatalytic reactivity for the oxygen reduction reaction (ORR). To gain atomistic insight into the observed voltammetric profiles, we compare our experimental results with periodic DFT calculations of trends in the thermodynamics of surface Cu dissolution potentials from highly stepped and kinked Pt(854) single crystal surfaces. The modeling suggests a dependence of the electrochemical Cu dissolution potentials on the detailed atomic environment (coordination number, nature of coordinating atoms) of the bimetallic Pt-Cu surfaces. The DFT-predicted shifts in electrochemical Cu dissolution potentials are shown to qualitatively account for the observed voltammetric profiles during Cu dealloying. Our study suggests that metal-specific energetics have to be taken into account to explain the detailed dealloying behavior of bimetallic surfaces.     

Pt-Ni/γ-Al2O3 双金属催化剂上1,3-环己二烯的低温加氢和脱氢反应

 采用等体积浸渍法制备了 γ-Al2O3 负载的 Pt 和/或 Ni 双金属催化剂或单金属催化剂, 测定了它们的 CO 化学吸附量, 并在原位红外间歇反应装置上评价了其催化 1,3-环己二烯 (1,3-CHD) 的低温 (308 K) 加氢和脱氢性能. 结果表明, Pt-Ni/γ-Al2O3 催化剂性能优于 Pt/γ-Al2O3 或 Ni/γ-Al2O3. 结合密度泛函理论计算的不同催化剂上 1,3-CHD 的表面吸附能, 验证了具有较弱环烯烃吸附能的双金属催化剂加氢活性较高.     

Icosahedral platinum alloy nanocrystals with enhanced electrocatalytic activities

This communication describes the synthesis of Pt-M (M = Au, Ni, Pd) icosahedral nanocrystals based on the gas reducing agent in liquid solution method. Both CO gas and organic surface capping agents play critical roles in stabilizing the icosahedral shape with {111} surfaces. Among the Pt-M alloy icosahedral nanocrystals generated, Pt(3)Ni had an impressive ORR specific activity of 1.83 mA/cm(2)(Pt) and 0.62 A/mg(Pt). Our results further show that the area-specific activity of icosahedral Pt(3)Ni catalysts was about 50% higher than that of the octahedral Pt(3)Ni catalysts (1.26 mA/cm(2)(Pt)), even though both shapes are bound by {111} facets. Density functional theory calculations and molecular dynamics simulations indicate that this improvement may arise from strain-induced electronic effects.     

Pt-Ni与Pd-Ni纳米薄膜的电化学制备和乙醇电催化性能研究(英文)

通过电沉积法在Ti基体上制备具有纳米结构的Pt-Ni和Pd-Ni薄膜,前者呈纳米花瓣形状,厚度为10～20 nm,后者主要由纳米颗粒组成,大小为50～60 nm.XRD测试结果显示,Pt-Ni和Pd-Ni纳米薄膜结晶程度较差.循环伏安法测试薄膜对乙醇电催化氧化的性能,结果表明Pt-Ni和Pd-Ni纳米薄膜可使乙醇起始氧化电位分别负移至-0.74 V和-0.71 V,且在碱性介质中加Ni可提高催化剂的活性和抗毒化性能.     

Amine-assisted synthesis of concave polyhedral platinum nanocrystals having {411} high-index facets

High-index surfaces of a face-centered cubic metal (e.g., Pd, Pt) have a high density of low-coordinated surface atoms and therefore possess enhanced catalysis activity in comparison with low-index faces. However, because of their high surface energy, the challenge of chemically preparing metal nanocrystals having high-index facets remains. We demonstrate in this work that introducing amines as the surface controller allows concave Pt nanocrystals having {411} high-index facets to be prepared through a facile wet-chemical route. The as-prepared Pt nanocrystals display a unique octapod morphology with {411} facets. The presence of high-index {411} exposed facets endows the concave Pt nanocrystals with excellent electrocatalytic activity in the oxidation of both formic acid and ethanol.     

Understanding mixing of Ni and Pt in the Ni/Pt(111) bimetallic catalyst via molecular simulation and experiments

Molecular dynamics (MD) simulations employing embedded atom method potentials and ultrahigh vacuum (UHV) experiments were carried out to study the mixing process between the Ni and Pt atoms in the Ni/Pt(111) bimetallic system. The barrier for a Ni atom to diffuse from the top surface to the subsurface layer is rather high (around 1.7 eV) as calculated using the nudged elastic band (NEB) method. Analysis of the relaxation dynamics of the Ni atoms showed that they undergo diffusive motion through a mechanism of correlated hops. At 600 K, all Ni atoms remain trapped on the top surface due to large diffusion barriers. At 900 K, the majority of Ni atoms diffuse to the second layer and at 1200 K diffusion to the bulk is observed. We also find that smaller Ni coverages and the presence of Pt steps facilitate the Ni-Pt mixing. By simulated annealing simulations, we found that in the mixed state, the Ni fraction oscillates between layers, with the second layer being Ni-richer at equilibrium. The simulation results at multiple time scales are consistent with the experimental data.     

铂/{还原氧化石墨烯/硅钨酸盐}_n复合物的制备及其电催化性能

利用层层自组装(LBL)结合原位光照还原法,制备了一系列{还原氧化石墨烯/多金属氧酸盐}n多层复合膜({rGO/POMs}_n),并以此作为载体,再通过恒电势法将Pt纳米粒子电沉积到复合膜载体上,得到一种P t/{rGO/SiW_(12)}_n燃料电池阳极纳米复合膜催化剂。用紫外可见分光光度计(UV-Vis)、原子力显微镜(AFM)以及扫描电子显微镜(SEM)等技术手段对载体复合多层膜的生长情况以及负载Pt纳米簇的表面形貌进行表征。结果表明,载体多层膜{rGO/SiW_(12)}_6被连续均匀地组装到了不同基底(氧化铟锡,ITO或玻碳,GC)表面且多层膜表面平整,在选定恒电势下,沉积于其表面的Pt纳米粒子具有花簇状形貌且分布均匀。比较研究了分别引入3种不同的多金属氧酸盐(硅钨酸盐SiW_(12),磷钼酸盐PMo_(12),磷钨酸盐PW_(12))制得的多层复合膜催化剂,即Pt/{rGO/SiW_(12)}_6、Pt/{rGO/PMo_(12)}_6和Pt/{rGO/PW_(12)}_6。电化学实验研究表明,在甲醇酸性溶液中,Pt/{rGO/SiW_(12)}_6复合膜相较于Pt/{rGO/PMo_(12)}_6、Pt/{rGO/PW_(12)}_6和Pt作为催化剂对甲醇氧化具有更好的电催化活性、电化学稳定性以及更优异的抗CO毒化性能,是一种颇有应用前景的燃料电池阳极催化剂。     

Interaction of CO and 02 with Supported Pt Single-Atoms on TiO2(110)

In view of the high activity of Pt single atoms in the low-temperature oxidation of CO, we investigate the adsorption behavior of Pt single atoms on reduced rutile TiO\begin{document}$ _2 $\end{document}(110) surface and their interaction with CO and O\begin{document}$ _2 $\end{document} molecules using scanning tunneling microscopy and density function theory calculations. Pt single atoms were prepared on the TiO\begin{document}$ _2 $\end{document}(110) surface at 80 K, showing their preferred adsorption sites at the oxygen vacancies. We characterized the adsorption configurations of CO and O\begin{document}$ _2 $\end{document} molecules separately to the TiO\begin{document}$ _2 $\end{document}-supported Pt single atom samples at 80 K. It is found that the Pt single atoms tend to capture one CO to form Pt-CO complexes, with the CO molecule bonding to the fivefold coordinated Ti (Ti\begin{document}$ _{5 \rm{c}} $\end{document}) atom at the next nearest neighbor site. After annealing the sample from 80 K to 100 K, CO molecules may diffuse, forming another type of complexes, Pt-(CO)\begin{document}$ _2 $\end{document}. For O\begin{document}$ _2 $\end{document} adsorption, each Pt single atom may also capture one O\begin{document}$ _2 $\end{document} molecule, forming Pt-O\begin{document}$ _2 $\end{document} complexes with O\begin{document}$ _2 $\end{document} molecule bonding to either the nearest or the next nearest neighboring Ti\begin{document}$ _{5 \rm{c}} $\end{document} sites. Our study provides the single-molecule-level knowledge of the interaction of CO and O\begin{document}$ _2 $\end{document} with Pt single atoms, which represent the important initial states of the reaction between CO and O\begin{document}$ _2 $\end{document}.     

Surface properties of Ni-Pt/SiO2 catalysts for N2O decomposition and reduction by H2

The surface properties of bimetallic Ni-Pt/SiO2 catalysts with variable Ni/Ni + Pt atomic ratio (0.75, 0.50, and 0.25) were studied using N2O decomposition and N2O reduction by hydrogen reactions as probes. Catalysts were prepared by incipient wetness impregnation of the silica support with aqueous solutions of the metal precursors to a total metal loading of 2 wt %. For both model reactions, Pt/SiO2 catalyst was substantially more active than Ni/SiO2 catalyst. Mean particle size by TEM was about the same (in the range 6-8 nm) for all catalysts and truly bimetallic particles (more than 95%) were evidenced by EDS in the Ni-Pt/SiO2 catalysts. CO adsorption on the bimetallic catalysts showed differences in the linear CO absorption band as a function of the Ni/Pt atomic ratio. Bimetallic Ni-Pt/SiO2 catalysts showed, for the N2O decomposition, a catalytic behavior that points out an ensemble-size sensitive behavior for Ni-rich compositions. For the N2O + H2 reaction, the bimetallic catalysts were very active at low temperature. The following activity order at 300 K was observed: Ni75Pt25 > Ni25Pt75 approximately Ni50Pt50 > Pt. TOF values for these catalysts increased 2-5 times compared to the most active reference catalyst (Pt/SiO2). The enhancement of the activity in the Ni75Pt25 bimetallic catalysts is explained in terms of the presence of mixed Ni-Pt ensembles.     

碳载Pt-Ni催化剂对直接甲醇燃料电池阴极氧电还原性能的影响

采用间歇式微波法制备了不同Pt、Ni原子比的碳载Pt-Ni催化剂。XRD结果表明,用这种方法制备的催化剂分散得比较好,具有较小的平均粒径,其中Pt-Ni/C(3∶1)催化剂的粒径最小。在旋转圆盘电极上进行氧的还原测试结果表明,当电解质溶液中没有甲醇和有甲醇存在时,Pt-Ni/C(3∶1)催化剂对氧的催化还原活性都很高,说明Pt-Ni/C(3∶1)催化剂对氧的催化还原受甲醇的影响较小。