Direct Hiyama cross-coupling of enaminones with triethoxy(aryl)silanes and dimethylphenylsilanol

2,3-Dihydropyridin-4(1H)-ones undergo direct C-H functionalization at C5 in the palladium(II)-catalyzed Hiyama reaction, using triethoxy(aryl)silanes and dimethylphenylsilanol. The reagent CuF(2) has a dual role in the reactions with triethoxy(aryl)silanes. It is a source of fluoride to activate the silane in the Hiyama reaction and also serves as the reoxidant to convert Pd(0) to Pd(II) in the catalytic cycle.     

Palladium-catalyzed Hiyama cross-coupling of aryltrifluorosilanes with aryl and heteroaryl chlorides

An efficient, palladium-catalyzed Hiyama cross-coupling reaction of aryltrifluorosilanes with aryl chlorides has been developed. A wide variety of functionalized biaryl derivatives were isolated in good to excellent yields. The scope of this reaction has also been extended to heteroaryl chlorides, affording the corresponding heterobiaryl compounds in high yields.     

CuI-mediated cross-coupling of aryl halides with oximes: a direct access to O-aryloximes

The first Cu-catalyzed cross-coupling of aromatic oximes and haloarenes is reported. This one-step formation of the =N-O-Ar linkage gives access to a range of oxime ethers in good to moderate yields.     

Het(aryl)isatin to het(aryl)aminoindoline scaffold hopping: A route to selective inhibitors of matrix metalloproteinases

Matrix metalloproteinases (MMPs) are a large family of zinc-dependent endoproteases known to exert multiple regulatory roles in tumor progression. A variety of chemical classes have been explored for targeting individual MMP isoforms. In the present study, we further developed our isatin based scaffold BB0223107 capable of binding to and inactivating MMP-2 in a zinc-independent manner (Agamennone et al., 2016). Forty four new compounds were synthesized based on the modified BB0223107. All compounds were tested in enzyme inhibition assays against MMP-2, ?8 and ?13. SAR studies demonstrated that 5-het(aryl)-3-aminoindolin-2-ones (37–39) were active toward MMP-2 and MMP-13. The most potent compounds 33 and 37 displayed an IC₅₀ of 3 µM against MMP-13 and showed a negligible activity toward MMP-8; almost all new compounds were inactive toward MMP-8. Replacement of the isatin ring with a biaryl system (compound 33) did not decrease the potency against MMP-13 but reduced the selectivity. Structure-based computational studies were carried out to rationalize the inhibitory activity data. The analysis of binding geometries confirmed that all fragments occupied the S1′ site in the three enzymes while no ligand was able to bind the catalytic zinc ion. To the best of our knowledge, this is the first example of 3-aminoindolin-2-one-based MMP inhibitors that, based on the computer modeling study, do not coordinate the zinc ion. Thus, the het(aryl)-3-aminoindolin-2-one derivatives emerge as a drug-like and promising chemotype that, along with the hetaryl variations, represents an alternative and thrifty tool for chemical space exploration aimed at MMP inhibitor design.     

Triphenylphosphine as a ligand for room-temperature Ni(0)-catalyzed cross-coupling reactions of aryl chlorides with arylboronic acids

Room-temperature Ni(0)-catalyzed cross-coupling reactions of deactivated aryl chlorides with arylboronic acids with inexpensive triphenylphosphine (PPh3) as a supporting ligand have been accomplished in good to excellent yields. Air-stable Ni(PPh3)2Cl2 has also been established as catalyst precursor, and highly active nickel catalysts were obtained when the reduction of Ni(PPh3)2Cl2 with n-BuLi was carried out in the presence of an aryl chloride.     

Pyrazole-tethered phosphine ligands for Pd(0): useful catalysts for Stille, Kumada and Hiyama cross-coupling reactions

Combination of 3,5-dimethyl-1-(2-(diphenylphosphino)phenyl)-1H-pyrazole, A, and 3-tert-butyl-5-methyl-1-(2-(diphenylphosphino)phenyl)-1H-pyrazole, B, with Pd₂(dba)₃ furnished excellent catalysts for Stille, Kumada and Hiyama cross-coupling reactions. Effects of solvents, bases and ligand/palladium ratio on efficiency of coupling reactions were studied. Molecular structures of palladium(II) complexes of A and B determined by single-crystal X-ray diffraction method revealed a close similarity of ligand arrangement around the metal centre.     

TBAF-catalysed silver oxide-mediated cross-coupling of functional trimethysilylpyridines: access to arylpyridines and bihetaryl compounds

The concomitant use of silver oxide and catalytic amount of TBAF allowed the efficient and chemoselective coupling of readily available 4-chloro- and 4-methyl-2-trimethyl-silyl-pyridines with heteroaromatic and aromatic halides. Based on control experiments, a mechanism involving the formation of a pyridylsilver intermediate and TBAF recycling is postulated.     

Efficient preparation of 2-azulenylboronate and Miyaura-Suzuki cross-coupling reaction with aryl bromides for easy access to poly(2-azulenyl)benzenes

This paper describes an efficient preparation of 2-azulenylboronate (6) starting from 2-iodoazulene by halogen-metal exchange reaction using n-BuLi and subsequent quenching with 2-isopropoxy-4,4,5,5-tetramethyl-1,3,2-dioxaborolane. The boronate 6 has been found to undergo Pd-catalyzed Miyaura-Suzuki cross-coupling reaction with a range of aryl bromides including aromatic poly bromides utilizing Pd₂(dba)₃-P(t-Bu)₃ as a catalyst and establishes a strategy to produce novel poly(2-azulenyl)benzenes, some of which are found to be insoluble in common organic solvents, however. The redox behavior of 2-arylazulenes and poly(2-azulenyl)benzenes was examined by cyclic voltammetry (CV) and compared with those of 6-azulenylbenzene derivatives reported previously.     

Preparation and palladium-catalyzed cross-coupling of aryl triethylammonium bis(catechol) silicates with aryl triflates

Pentavalent aryl and heteroaryl bis(catechol) silicates undergo palladium-catalyzed cross-coupling with aryl and heteroaryl triflates in the presence of a fluoride source in excellent yields. These solid, air-stable bis(catechol) silicates are prepared from a high-yielding displacement reaction between catechol and an aryl siloxane in the presence of an amine base. The cross-coupling reaction is tolerant of a wide range of electron-donating and electron-withdrawing groups. Several examples of di-ortho-substituted triflates are successfully coupled with these reagents.     

Ligand-supported palladium-catalyzed cross-coupling reactions of (hetero) aryl chlorides

The introduction of electron rich and sterically hindered ligands has made otherwise inert aryl chlorides and hetero aryl chlorides viable coupling partners in palladium-catalyzed Suzuki-Miyaura, Sonogashira, Stille and other types of cross-coupling reactions. This review gives highlights of cross-coupling of aryl chlorides employing in situ generated palladium catalytic systems.     

Microwave-assisted, Pd(0)-catalyzed cross-coupling of diazirines with aryl halides

Pd(0)-catalyzed cross-coupling reactions of diazirines with aryl halides under microwave heating conditions afford a series of substituted olefins. A reaction mechanism involving the migratory insertion of the Pd carbene intermediate is proposed.     

Facile synthesis of aryl(het)cyclopropane catalyzed by palladacycle

Sphos (2-dicyclohexylphosphino-2′,6′-dimethoxy-1,1′-biphenyl) adduct of cyclopalladated ferrocenylimine (IIe) exhibited highly catalytic activity for the Suzuki cross-coupling reaction of cyclopropylboronic acid with aryl(het) halides with 1 mol % catalyst loading. This process was applied to both of aryl and heteroaryl halides (Br and Cl), and made the various arylcyclopropane and heteroarylcyclopropane to be easily synthesized. A variety of substituents on the aryl halides, such as alkyl, acetyl, benzoyl, ether, formyl, carboxylate, methoxy, nitro and cyano were tolerated.     

Macromolecular effect: synthesis of a ferrocenylmethylphosphine-containing polymer as highly efficient ligands for room-temperature palladium(0)-catalyzed Suzuki cross-coupling reactions of aryl chlorides

The design and synthesis of a ferrocenylmethylphosphine-containing polymer and its application as efficient ligands for the room-temperature Pd(0)-catalyzed cross-coupling reaction of aryl chlorides with arylboronic acids, for which corresponding monomeric monophosphines are totally inactive, are described. Our work demonstrated that rather small monophosphine moieties such as RPPh2 can be used as highly efficient ligands when appropriately incorporated into a rigid and sterically regular polymer network and using monophosphine-containing polymers as ligands is a feasible approach to access highly active (monophosphine)-palladium(0) complexes. The macromolecular approach described here may open a new avenue to other coordinatively unsaturated (monoligand)-transition metal complexes which are potentially useful in organic synthesis.     

Stereospecific cross-coupling of alpha-(thiocarbamoyl)organostannanes with alkenyl, aryl, and heteroaryl iodides

Racemic and scalemic PTC-protected alpha-hydroxystannanes cross-couple with alkenyl/aryl/heteroaryl iodides in moderate to good yields using copper(I) thiophene-2-carboxylate (CuTC) in THF at or below room temperature. Simple aryl iodides and 1-iodocyclohexene, two classes of electrophiles that typically react sluggishly, are also good substrates. Cross-couplings proceed with retention of configuration at the alkenyl- and stannyl-substituted stereocenters.     

Palladium-catalyzed cross-coupling of aryl triethylammonium bis(catechol) silicates with aryl bromides using microwave irradiation

The scope of the palladium-catalyzed cross-coupling reaction of aryl bis(catechol) silicates has been extended to include the coupling of aryl bromides by employing microwave irradiation. This new set of coupling conditions is tolerant of electron-rich and -deficient aryl bromides. In addition, a variety of substituted aryl bis(catechol) silicates have been successfully cross-coupled.     

Palladium(0)-promoted cross-coupling of allenylmetal compounds with aryl and vinyl iodides. A novel route to aryl- and vinyl-substituted allenes

The reaction of allenylmetal compounds, RR{′}CCCHM (I), with aryl and vinyl iodides, R I, have been studied. With Pd(PPh₃)₄ as catalyst a highly regioselective formation of allenes, RR{′}CC CHR″ (II), has been observed for MgCl, Cu, Cu_1/2,Li_1/2, Ag, Ag_1/2Li_1/2, or ZnCl, but not Li. The reaction of the iodides proceeds with retention of configuration.     

Stereospecific palladium-catalyzed cross-coupling of (E)- and (Z)-alkenylsilanolates with aryl chlorides

The cross-coupling of geometrically defined (E)- and (Z)-alkenyl- and styrylsilanolates with a wide variety of aromatic and heteroaromatic chlorides has been achieved. Under catalysis by bulky, biphenyl-derived phosphines and allylpalladium chloride, the (preformed, stable) potassium salts of di-, tri- and tetrasubstituted alkenyldimethylsilanols undergo high yielding and highly stereospecific coupling to aryl chlorides in THF or dioxane. A variety of functional groups are compatible with these reaction conditions including nitro, ester, ketone, and nitrile. Both (E)- and (Z)-alkenylsilanolates coupled with nearly identical rate and efficiency.     

Palladium-catalyzed cross-coupling reactions of (2-pyridyl)allyldimethylsilanes with aryl iodides

[reaction: see text] (2-Pyridyl)allyldimethylsilanes were found to be novel pyridyl transfer reagents in palladium-catalyzed cross-coupling reactions of various aryl iodides in the presence of silver(I) oxide as an activator.     

Pd-catalyzed decarboxylative cross-coupling of sodium pyrimidinecarboxylates with (hetero)aryl bromides

A straightforward method for the synthesis of functionalized 4- or 5-(hetero)arylpyrimidines via decarboxylative cross-coupling reaction from readily available pyrimidine-4- and pyrimidine-5-carboxylates was described. In the presence of dual-catalyst system of Pd(PPh₃)₄/Cu₂O, the reaction proceeds smoothly, tolerates a variety of functional groups, and provides easy access to the synthesis of different (hetero)arylpyrimidines compounds.