Kinetic, DFT and TD-DFT studies on the mechanism of stabilization of pyramidal H3PO3 at the [Mo3M'S4(H2O)10]4+ clusters (M' = Pd, Ni)

The kinetics of reaction between the [Mo(3)M'S(4)(H(2)O)(10)](4+) clusters (M' = Pd, Ni) and H(3)PO(3) has been studied in 4.0 M Hpts/Lipts (pts(-) = p-toluenesulfonate). For both complexes there is an initial kinetic step with small absorbance changes that corresponds to substitution of the water coordinated to Pd by a molecule of tetrahedral H(3)PO(3). For the Pd complex, tautomerization of H(3)PO(3) occurs in a slower kinetic step with much larger absorbance changes; it leads to formation of [Mo(3)Pd(pyr-H(3)PO(3))S(4)(H(2)O)(9)](4+) in which H(3)PO(3) adopts a pyramidal structure, but the process is not as favored as for H(3)PO(2). The kinetics of this second step is independent of the concentration of H(3)PO(3) but dependent on the concentration of Hpts on the supporting electrolyte. For the Ni complex, the second step is severely hindered and its kinetics could not be studied. DFT calculations indicate that tautomerization of H(3)PO(3) is expected to be less favoured than that of H(3)PO(2), both processes being less favored at the Ni cluster than at its Pd analogue. With regard to the tautomerization mechanism, the calculations indicate that the mechanism previously proposed for H(3)PO(2) can be the same for H(3)PO(3), although the initial H-shift can also occur through a protonation-deprotonation sequence with participation of external protons instead of a second molecule of the phosphorus acid. TD-DFT studies have been also carried out to understand the similarity between the spectra of the starting complex and the reaction intermediate formed in the first kinetic step as well as the large spectral changes associated to the tautomerization process. Although it contains contributions from several transitions, the intense band observed for clusters containing coordinated pyr-H(3)PO(3) involves essentially ligand-to-metal charge-transfer (LMCT) transitions.     

A complete family of isostructural cluster compounds with cubane-like M(3)S(4)M' cores (M = Mo,W; M' = Ni,Pd, Pt): comparative crystallography and electrochemistry

By reaction of the geometrically incomplete cubane-like clusters [(eta(5)-Cp')(3)Mo(3)S(4))][pts] and [(eta(5)-Cp')(3)W(3)S(4)][pts] (Cp' = methylcyclopentadienyl; pts = p-toluenesulfonate) with group 10 alkene complexes, three new heterobimetallic clusters with cubane-like cluster cores were isolated: [(eta(5)-Cp')(3)W(3)S(4)M'(PPh(3))][pts] ([5][pts], M' = Pd; [6][pts], M' = Pt); [(eta(5)-Cp')(3)Mo(3)S(4)Ni(AsPh(3))][pts] ([7][pts]). The compounds [5][pts]-[7][pts] are completing the extensive series of clusters [(eta(5)-Cp')(3)M(3)S(4)M'(EPh(3))][pts] (M = Mo, W; M' = Ni, Pd, Pt; E = P, As) which allows the consequences of replacing a single type of atom on structural and NMR and UV/vis spectroscopic as well as electrochemical properties to be determined. Single-crystal X-ray structure determinations of [5][pts]-[7][pts] revealed that [5][pts] was not isomorphous to the other members of the series [(eta(5)-Cp')(3)M(3)S(4)M'(EPh(3))][pts] due to distinctly different cell parameters, which in the molecular structure of [5](+) is reflected in a slightly different orientation of the PPh(3) ligand. Electrochemical measurements on the series showed that the Mo-based clusters were more difficult to oxidize than their W-based analogues. The Pd-containing clusters underwent two-electron oxidation processes, whereas the Ni- and Pt-containing clusters underwent two separated one-electron oxidation processes.     

Synthesis,Characterization, and Catalytic Activity of a Cubic [Mo3S4Pd] Cluster Bearing Bulky Cyclopentadienyl Ligands

A cubic metal-sulfur cluster containing three Mo ions and a Pd ion, [Cp^SiEt3₃Mo₃S₄Pd]Cl ( Mo₃Pd , Cp^SiEt3=C₅Me₄SiEt₃), was synthesized by the incorporation of the Pd ion into a Mo₃S₄ cluster [Cp^SiEt3₃Mo₃S₄] ( Mo₃ ). Mo₃Pd was characterized by ¹H NMR, UV-vis, X-ray crystallography, and cyclic voltammetry measurements. The electrochemical measurements demonstrated reversible one- and two-electron reduction processes for Mo₃Pd , which suggested potential catalytic activity for two-electron substrate reductions such as hydrogen evolution reaction. Controlled potential electrolysis in the presence of Mo₃Pd and trifluoroethanol in THF solvent displayed H₂ formation with a constant current over 60 min. The amount of generated H₂ by Mo₃Pd was two times higher than Mo₃ , indicating the catalytic activity facilitated by the Pd center. The mechanism of the catalytic cycle was determined by density functional theory.     

Aqueous solution chemistry of [Mo3CuSe4]n+ (n = 4, 5) and [W3CuQ4]5+ (Q = S, Se) clusters

The triangular cluster [Mo3Se4(H2O)9]4+ reacts with Cu turnings to give a new heterometallic cuboidal cluster [Mo3CuSe4(H2O)10]4+(purple; UV/Vis lambda(epsilon): 352(3907), 509(2613)). The reaction of [Mo3Se4(H2O)9]4+ with CuCl afforded the 5+ cube [Mo3CuSe4(H2O)10]5+(red; UV/Vis lambda(epsilon): 356(5406), 500(3477)). In contrast, [W3Se4(H2O)9]4+ both with Cu and CuCl gives the 5+ cube, [W3CuSe4(H2O)10]5+(yellow-green; UV/Vis lambda(epsilon): 312(5327), 419(3256) and 628(680)). Cyclic voltammetry of [M3CuQ4(H2O)10]5+ in 2 M HCl (M = Mo, W; Q = S, Se) shows a reversible one-electron reduction wave for the Mo clusters, but no reduction occurs for the W clusters prior to H+ reduction. In HCl solutions, Cl is coordinated to the Cu site of the clusters, alongside some less extensive coordination to Mo and W, and for [W3(CuCl)S4(H2O)6Cl3]+, isolated as the supramolecular adduct with cucurbit[6]uril, [W3(CuCl)S4(H2O)6Cl3]2Cl2 x C36H36N24O12 x 12H2O, the crystal structure was determined (Cu-W 2.856(4) angstroms, W-W 2.7432(15) angstroms, Cu-Cl 2.167(13) angstroms).     

Nonvalent interactions in the crystal structures of (Et4N)2[Mo3S7Br6] and (Et4N)(H9O4)[Mo3S7Cl6] clusters

Crystal structures of (Et₄N)₂[Mo₃S₇Br₆] (I) and (Et₄N)(H₉O₄)[Mo₃S₇Cl₆] (II) clusters belonging to the class of Mo₃S ₇ ⁴⁺ were determined by X-ray diffraction analysis. Crystals I are orthorhombic a=19.106(3), b=12.930(2), c=29.887(5) Å, V=7383(2) ų, space group Pbca, Z=8, d_calc=2.253 g/cm³, R(F)=0.0402, wR(F²)=0.0587 for 2493 F_hkl>4σ. Crystals II are monoclinic, a=17.106(3), b=18.882(4), c=11.006(2), Å, β=126.13(3)°, V=2871.2(9) ų, space group Cc, Z=4, d_calc=2.147 g/cm³, R(F)=0.0181, wR(F²)=0.0445 for 2307 F_hkl>4σ. Structure I has an anion dimer with 3S_ax…Cl=3.258(4)–3.404(4) Å; the dimer is similar to that observed in the structures of A₂[M₃X₇Hal₆], A=Ph₄P⁺, Ph₃EtP⁺, and PPN⁺. In structure II, infinite chains of anions bonded by 3S_ax…Cl contacts of 3.183(3)–3.394(3) Å were found. A similar phenomenon was established earlier for the structure of (Et₄N)(H₉O₄)[Mo₃S₇Br₆] (III), which is not isostructural to II. Compounds II and III also differ in the structure of the H₉O₄ ⁺ cation: infinite helix in II and pyramid in III.     

[MoFe3S4]3+ and [MoFe3S4]2+ cubane clusters containing a pentamethylcyclopentadienyl molybdenum moiety

A series of organometallic molybdenum/iron/sulfur clusters of the general formula [Cp¹MoFe₃S₄L_n]^m (Cp¹ = η⁵-C₅Me₅; L = S^tBu, SPh, Cl, I, n = 3, m = 1−; L_n = I₂(P^tBu₃), m = 0; L = 2,6-diisopropylphenylisocyanide (ArNC), n = 7, m = 1+) have been synthesized. A cubane cluster (PPh₄)[Cp¹MoFe₃S₄(S^tBu)₃] (2) was isolated from a self-assembly reaction of Cp¹Mo(S^tBu)₃ (1), FeCl₃, LiS^tBu, and S₈ followed by cation exchange with PPh₄Br in CH₃CN, while an analogous cluster (PPh₄)[Cp¹MoFe₃S₄(SPh)₃] (3) was obtained from the Cp¹MoCl₄/FeCl₃/LiSPh/PPh₄Br reaction system or from a ligand substitution reaction of 2 with PhSH. Treatment of 2 with benzoyl chloride gave rise to (PPh₄)[Cp¹MoFe₃S₄Cl₃] (4), which was in turn converted to (PPh₄)[Cp¹MoFe₃S₄I₃] (5) by the reaction with NaI. A neutral cubane cluster Cp¹MoFe₃S₄I₂(P^tBu₃) (6) was generated upon treating 5 with P^tBu₃. Although reduction of 4 by cobaltocene under the presence of ArNC resulted in a disproportionation of the cubane core to give Fe₄S₄(ArNC)₉Cl (7), a similar reduction reaction of 5 produced [Cp¹MoFe₃S₄(ArNC)₇]I (8), where the MoFe₃S₄ core was retained. The crystal structures of 4–6, and 8 were determined by the X-ray analysis.     

Syntheses and characterization of oxygen/sulfur-bridged incomplete cubane-type clusters, [Mo3S4Tp3]+ and [Mo3OS3Tp3]+, and a mixed-metal cubane-type cluster, [Mo3FeS4ClTp3]. X-ray structures of [Mo3S4Tp3]Cl, [Mo3OS3Tp3]PF6, and [Mo3FeS4ClTp3

The reaction of [Mo3S4(H2O)9]4+ (1) with hydrotris(pyrazolyl)borate (Tp) ligands produced [Mo3S4Tp3]Cl x 4 H2O ([3]Cl x 4 H2O) in an excellent yield. An X-ray structure analysis of [3]Cl x 4 H2O revealed that each molybdenum atom bonded to the Tp ligand. We report four salts of 3, [3]Cl x 4 H2O, [3]tof x 2 H2O, [3]PF6 x H2O, and [3]BF4 x 2 H2O in this paper. The solubility and stability of the chloride salt in organic solvents differ completely from those of the other salts. We have also prepared a new compound, [Mo3OS3Tp3]PF6 x H2O ([4]PF6 x H2O), via the reaction of [Mo3OS3(H2O)9]4+ (2) with KTp in the presence of NH4PF6. All the molybdenum atoms bonded to Tp ligand. 1H NMR signals corresponding to nine protons bonded to three pyrazole rings in one Tp were observed in a spectrum (at 253 K) of [3]BF4 x 2 H2O. It shows that cluster 3 has a 3-fold rotation axis in CD2Cl2 solution. Twenty-one 1H NMR signals corresponding to twenty-seven protons bonded to nine pyrazole rings in three Tp ligands were observed in a spectrum (at 233 K) of [4]PF6 x H2O; obviously, 4 has no 3-fold rotation axis, in contrast to 3. The short CH...mu3S distance caused large upfield chemical shifts in the 1H NMR spectra of 3 and 4. The reaction of 3 with metallic iron in CH2Cl2 produced [Mo3FeS4XTp3] (X = Cl (5), Br (6)). X-ray structure analysis of 5 has revealed the existence of a cubane-type core Mo3FeS4. Complex 3 functions as a metal-complex ligand for preparing a novel mixed-metal complex even in nonaqueous solvents. The cyclic voltammogram of 5 shows two reversible one-electron couples (E(1/2) = -1.40 and 0.52 V vs SCE) and two irreversible one-electron oxidation processes (E(pc) = 1.54 and 1.66 V vs SCE).     

Vibrational behavior of the phosphates ions in dittmarite-type compounds M'M'PO4.H2O (M'=K+, NH4+; M'=Mn2+, Co2+, Ni2+)

The IR and Raman spectra of the isostructural M'M'PO4.H2O compounds (M'=K+, NH4+; M'=Mn2+, Co2+, Ni2+) are reported and discussed with respect to the normal vibrations of the PO(4)3- ions. The vibrational behavior of PO4(3-) is in agreement with its low site symmetry Cs in the lattices-the symmetric nu1 and nu2 modes are activated in the IR spectra and the degeneration of the asymmetric nu3 and nu4 modes is lifted. A relatively large unit-cell group splitting is observed for nu1 in both the IR and Raman spectra and for nu3 in Raman spectra. It has been established that the mean wavenumbers of the P-O stretches (nuPO) are not affected by the M2+ ions present, but they are lower for the NH4-series than for the K-one (predominant influence of both the smaller repulsion potential and the hydrogen bonds in the NH4-lattices over the influence of the M+-O interactions). The extent of the energetic distortion of the PO(4)3- ions has been estimated based on the spectroscopic data for the site group splitting of the asymmetric modes (Deltanu3 and Deltanu4), the separation between the highest and the lowest wavenumbered P-O stretches (Deltanumax) and the intensity of nu1 in the IR spectra. The data provide an evidence that the PO4(3-) ions in KM'PO4.H2O are more distorted regarding the P-O bond lengths than those in NH4M'PO4.H2O, but their angular distortion is the same in both series. The trends for the energetic distortion of the phosphate ions found from the spectroscopic data correspond to the data for their geometric distortion deduced from the values of the distortion indices DI(PO) and DI(OPO).     

一个新颖镍配位阳离子修饰的还原型钼磷酸盐：Ni[Mo6O12(OH)3(PO4)(HPO4)3]2][Ni(H2O)2][Ni(H2O)(bipy)2]4·5H2O

水热合成并通过红外、热重、单晶X-射线衍射表征了一个新颖镍配位阳离子修饰的还原型钼磷酸盐,Ni[Mo₆O₁₂(OH)₃(PO₄)(HPO₄)₃]₂][Ni(H₂O)₂][Ni(H₂O)(bipy)₂]₄·5H₂O。单晶X-射线衍射研究表明,两个{Mo₆P₄}簇单元通过一个镍离子连接形成一个Ni[Mo₆P₄]₂二聚结构单元,其进一步和其他的镍配位阳离子连接成钼磷酸盐一维链状结构。在H₂O₂存在下的液－固体系中,使用该化合物催化氧化苯甲醛的探针反应结果表明,该化合物具有较高的催化氧化活性。     

Construction of symmetric and asymmetric Mo/S/Cu clusters from a cluster precursor [Et4N]2[(edt)2Mo2S2(mu-S)2] (edt = ethanedithiolate)

Treatment of [Et 4N] 2[(edt) 2Mo 2S 2(mu-S) 2] ( 1) (edt = ethanedithiolate) with equimolar CuBr afforded an anionic hexanuclear cluster [Et 4N] 2[(edt) 2Mo 2(mu-S) 3(mu 3-S)Cu] 2.2CH 2Cl 2 ( 2.2CH 2Cl 2). On the other hand, reactions of 1 with 2 equiv of CuBr in the presence of 1,2-bis(diphenylphosphino)methane (dppm) and pyridine (Py) ligands gave rise to two neutral tetranuclear clusters [(edt) 2Mo 2O 2(mu-S) 2Cu 2(dppm) 2] ( 3) and [(edt) 2Mo 2O(mu 3-S)(mu-S) 2Cu 2(Py) 4] ( 4), respectively. The reaction of 1 with 2 equiv of CuBr followed by the addition of a mixture of dppm and Py (molar ratio = 1:2) yielded another neutral tetranuclear cluster [(edt) 2Mo 2(mu-S) 2(mu 3-S) 2Cu 2(dppm)(Py)].Py ( 5.Py). Compounds 2- 5 have been characterized by elemental analysis, UV-vis spectra, IR spectra, (1)H NMR, and X-ray analysis. The structure of the dianion of 2 can be viewed as having a [Mo 4S 8Cu 2] core in which two chemically equivalent [Mo 2(mu-S) 3(mu 3-S)(edt) 2Cu] (-) anions are linked by two extra Cu-S edt bonds. The molecular structure of 3 may be visualized as being built of one [(edt) 2Mo 2X 2(mu-S) 2] (2-) dianion and one [Cu 2(dppm) 2] (2+) dication that are connected by a pair of M-mu-S edt bonds. Compound 4 is formed by the affiliation of two Cu(I) atoms only at one end of the [(edt) 2Mo 2S 2(mu-S) 2] moiety, connecting with the S t atoms and the S edt atom. Cluster 5.Py can be viewed as being constructed from the addition of one Cu atom onto the incomplete cubanelike [Mo 2S 4Cu] framework through one terminal sulfur and one edt sulfur. Among the four clusters, 3 and 4 have internal mirror symmetry or pseudo mirror symmetry, respectively, while 2 and 5 are asymmetric clusters with racemic formation.     

Reactions of synthetic [2Fe-2S] and [4Fe-4S] clusters with nitric oxide and nitrosothiols

The interaction of nitric oxide (NO) with iron-sulfur cluster proteins results in degradation and breakdown of the cluster to generate dinitrosyl iron complexes (DNICs). In some cases the formation of DNICs from such cluster systems can lead to activation of a regulatory pathway or the loss of enzyme activity. In order to understand the basic chemistry underlying these processes, we have investigated the reactions of NO with synthetic [2Fe-2S] and [4Fe-4S] clusters. Reaction of excess NO(g) with solutions of [Fe2S2(SR)4](2-) (R = Ph, p-tolyl (4-MeC6H4), or 1/2 (CH2)2-o-C6H4) cleanly affords the respective DNIC, [Fe(NO)2(SR)2](-), with concomitant reductive elimination of the bridging sulfide ligands as elemental sulfur. The structure of (Et4N)[Fe(NO)2(S-p-tolyl)2] was verified by X-ray crystallography. Reactions of the [4Fe-4S] clusters, [Fe4S4(SR)4](2-) (R = Ph, CH2Ph, (t)Bu, or 1/2 (CH2)-m-C6H4) proceed in the absence of added thiolate to yield Roussin's black salt, [Fe4S3(NO)7](-). In contrast, (Et4N)2[Fe4S4(SPh)4] reacts with NO(g) in the presence of 4 equiv of (Et4N)(SPh) to yield the expected DNIC. For all reactions, we could reproduce the chemistry effected by NO(g) with the use of trityl-S-nitrosothiol (Ph3CSNO) as the nitric oxide source. These results demonstrate possible pathways for the reaction of iron-sulfur clusters with nitric oxide in biological systems and highlight the importance of thiolate-to-iron ratios in stabilizing DNICs.     

Synthesis and Structural Characterization of the Complex 〔Et_4N〕_2〔Ni_2(C_2S_4)(C_3S_5)_2〕

１ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅｃｈｅｍｉｓｔｒｙｏｆｃｏｍｐｏｕｎｄｓｗｉｔｈｄｍｉｔ（ｄｍｉｔ＝１,３ ｄｉｔｈｉｏｌｅ ２ ｔｈｉｏｎｅ ４,５ ｄｉｔｈｉｏｌａｔｅ）ｈａｓａｔｒａｃｔｅｄｃｏｎｓｉｄｅｒａｂｌｅａｔｅｎｔｉｏｎｒｅｃｅｎｔｌ...