Does core size matter in the kinetics of ligand exchanges of monolayer-protected Au clusters?

This paper compares the kinetics of exchanges of phenylethanethiolate ligands (PhC2S-) of the monolayer-protected clusters (MPCs) Au(38)(SC2Ph)(24) and Au(140)(SC2Ph)(53) with p-substituted arylthiols (p-X-PhSH), where X = NO(2), Br, CH(3), OCH(3), and OH. First-order rate constants at 293 K for exchange of the first ca. 25% of the ligands on the molecule-like Au(38)(SC2Ph)(24) MPC, measured using (1)H NMR, vary linearly with the in-coming arythiol concentration; ligand exchange is an overall second-order reaction. Remarkably, the second-order rate constants for ligand exchange on Au(38)(SC2Ph)(24) are very close to those of corresponding exchange reactions on the larger nanoparticle Au(140)(SC2Ph)(53) MPCs. These are the first results that quantitatively show that the chemical reactivity of different sized nanocrystals is almost independent of size; presumably, this is because the locus of the initial ligand exchanges is a common kind of site, thought to be the nanocrystal vertexes. The rates of later stages of exchange (beyond ca. 25%) differ for Au(38) and Au(140) cores, the latter being much slower presumably due to its larger terrace-like surface atom content. The reverse exchange reaction was studied for Au(38)(p-X-arylthiolate)(24) MPCs (X = NO(2), Br, and CH(3)), where the in-coming ligand is now phenylethanethiol. Remarkably, the rate constants of both forward and reverse exchanges display identical substituent effects, which implies a concurrent bonding of both in-coming and leaving ligands to the Au core in the rate-determining step, as in an associative mechanism. X = NO(2) gives the fastest rates, and the ratio of forward and reverse rate constants gives an equilibrium constant of K(EQ,PE) = 4.0 that is independent of X.     

Kinetic and computational study of dissociative substitution and phosphine exchange at tetrahedrally distorted cis-Pt(SiMePh2)2(PMe2Ph)2

The substitution kinetics of Me2PhP in cis-Pt(SiMePh2)2(PMe2Ph)2 (1) by the chelating ligand bis(diphenylphosphino)ethane has been followed at 25.0 degrees C in dichloromethane by stopped-flow spectrophotometry. Addition of the leaving ligand causes mass-law retardation compatible with a dissociative process via a three-coordinate transition state or intermediate. Exchange of Me2PhP in 1 has been studied by variable-temperature magnetization transfer 1H NMR in toluene-d8, giving kex326 = 1.76 +/- 0.12 s-1, delta H++ = 117.8 +/- 2.1 kJ mol-1, and delta S++ = 120 +/- 7 J K-1 mol-1. An exchange rate constant independent of the concentrations of free phosphine, a strongly positive delta S++, and nearly equal exchange and ligand dissociation rate constants also support a dissociative process. Density functional theory (DFT) calculations for a dissociative process give an estimate for the Pt-P bond energy of 98 kJ mol-1 for R = R' = Me, which is in reasonable agreement with the experimental activation energy given the differences between the substituents used in the calculation and those employed experimentally. DFT calculations on cis-Pt(PR3)2(SiR'3)2 (R = H, CH3; R' = H, CH3) are consistent with the experimental molecular structure and show that methyl substituents on the Si donors are sufficient to induce the observed tetrahedral twist. The optimized Si-Pt-Si angle in cis-Pt(SiH3)2(PH3)2 is not significantly altered by changing the P-Pt-P angle from its equilibrium value of 104 degrees to 80 degrees or 120 degrees. The origin of the tetrahedral twist is therefore not steric but electronic. The Si-Pt-Si angle is consistently less than 90 degrees, but the Si-Si distance is still too long to support an incipient reductive elimination reaction with its attendant Si-Si bonding interaction. Instead, it appears that four tertiary ligands introduce a steric strain which can be decreased by a twist of two of the ligands out of the plane; this twist is only possible when two strong sigma donors are cis to each other, causing a change in the metal's hybridization.     

Probing the nature of the Co(III) ion in corrins: a comparison of the thermodynamics and kinetics of the ligand substitution reactions of aquacyanocobyrinic acid heptamethyl ester and stable yellow aquacyanocobyrinic acid heptamethyl ester

Equilibrium constants (log K) for the substitution of coordinated H(2)O in aquacyanocobyrinic acid heptamethyl ester (aquacyanocobester, ACCbs) and stable yellow aquacyanocobyrinic acid heptamethyl ester (stable yellow aquacyanocobester, ACSYCbs), in which oxidation of the C5 carbon of the corrin interrupts the normal delocalized system of corrins, by ligands with soft (CN(-), SO(3)(2-), and S(2)O(3)(2-)) and hard (NO(2)(-) and N(3)(-)) donors have been determined. The ligands with a harder donor atom (N in N(3)(-) and NO(2)(-)) produce ΔH values that are more negative in their reactions with ACSYCbs than with ACCbs. If the donor atom is softer (C in CN(-) and S in SO(3)(2-)), then ΔH is less positive, or more negative, for reactions with ACCbs than with ACSYCbs. The softer metal in ACCbs has a preference for softer ligands and the harder metal in ACSYCbs for the harder ligands. A kinetics study in which CN(-) substitutes H(2)O on Co(III) shows that ACCbs is more labile than ACSYCbs; the second-order rate constant k(II) is between 4.6 (at 5 °C) and 2.6 (at 35 °C) times larger. ΔH(?) for the reaction of CN(-) with ACCbs is smaller by some 12 kJ mol(-1) than that for the reaction with ACSYCbs, consistent with an earlier transition state in which bonding between the softer metal of ACCbs and the ligand is greater than that of ACSYCbs with its harder metal. This difference in ΔH(?) makes ACCbs over 100 times more labile, although the effect is masked by a ΔS(?) value that is over 30 J K(-1) mol(-1) more negative. There is a significant increase in the inertness of Co(III) upon a decrease in the extent of conjugation of the corrin ligand. Modifying the electronic structure of the equatorial ligand in the cobalt corrins can modify the thermodynamics and kinetics of its reactions with exogenous ligands.     

Intra- and intermolecular interactions in the series of acyclic and macrocyclic compounds containing nucleotide bases and their derivatives

Intra-and intermolecular interactions in acyclic compounds containing nucleotide base (uracil and thymine) derivatives and their macrocyclic analogs (pyrimidinophanes) were studied by IR, UV, luminescence, and NMR spectroscopy. Molecules of these compounds include one or two N³-methylsubstituted or N³-unsubstituted uracil fragment or two adenine fragments linked through a hexamethylene spacer to an uracil, 5,5′-methylenediuracil or diphenylmethane fragment. The examined compounds almost all are characterized by π-π interactions and intramolecular hydrogen bonding between the terminal uracil or adenine fragments. Intramolecular association constants were determined and factors affecting them were discussed. Complex formation of acyclic and macrocyclic ligands with adenine and thymine derivatives was studied. The low values of the association constants were interpreted in terms of a competition between intra-and intermolecular bonding and very labile ligand structure.     

Comparative NMR Study of nPrBTP and iPrBTP

Bistriazinyl-pyridine type ligands are important extracting agents for separating trivalent actinide ions from trivalent lanthanides. The alkyl substituents on the lateral triazine rings have a significant effect on the stability of the ligand against hydrolysis and radiolysis. Furthermore they influence solubility, extraction behaviour and selectivity. TRLFS and extraction studies suggest differences in complexation and extraction behaviour of BTP ligands bearing iso-propyl or n-propyl substituents, respectively. As NMR studies allow insight into the metal-ligand bonding, we conducted NMR studies on a range of ¹⁵N-labelled nPrBTP and iPrBTP Ln(III) and Am(III) complexes. Our results show that no strong change in the metal-ligand bonding occurs, thus excluding electronic reasons for differences in complexation behaviour, extraction kinetics and selectivity. This supports mechanistic reasons for the observed differences.     

Structural and theoretical basis for ligand exchange on thiolate monolayer protected gold nanoclusters

Ligand exchange reactions are widely used for imparting new functionality on or integrating nanoparticles into devices. Thiolate-for-thiolate ligand exchange in monolayer protected gold nanoclusters has been used for over a decade; however, a firm structural basis of this reaction has been lacking. Herein, we present the first single-crystal X-ray structure of a partially exchanged Au(102)(p-MBA)(40)(p-BBT)(4) (p-MBA = para-mercaptobenzoic acid, p-BBT = para-bromobenzene thiol) with p-BBT as the incoming ligand. The crystal structure shows that 2 of the 22 symmetry-unique p-MBA ligand sites are partially exchanged to p-BBT under the initial fast kinetics in a 5 min timescale exchange reaction. Each of these ligand-binding sites is bonded to a different solvent-exposed Au atom, suggesting an associative mechanism for the initial ligand exchange. Density functional theory calculations modeling both thiol and thiolate incoming ligands postulate a mechanistic pathway for thiol-based ligand exchange. The discrete modification of a small set of ligand binding sites suggests Au(102)(p-MBA)(44) as a powerful platform for surface chemical engineering.     

β-二亚胺基Ni(Ⅱ)配合物的合成及其催化乙烯聚合研究

合成了一系列带有不同取代基的β-二亚胺配体及其Ni(Ⅱ)的配合物.利用核磁共振谱、元素分析和单晶X射线衍射等手段对配体及配合物进行了表征.元素分析和单晶结构分析表明,在相同的实验条件下苯基取代的β-二亚胺配体锂盐与NiCl2反应只能得到双配体化合物1;而2,6-二甲基苯基及2,6-二异丙基苯基取代的配体锂盐与NiCl2反应得二聚的单氯化物2和3,2个Ni原子通过双氯桥连接在一起.配合物2和3经烷基铝活化后催化乙烯聚合可得到高分子量聚乙烯,活性可达到2.0×105gPE/(molcat·h),分子量最高可达到100万以上.     

Guest and subunit exchange in self-assembled ionophores

[reaction: see text] Self-assembled ionophores, formed by hydrogen bonding of isoG 1 around a cation, are dynamic structures. Multinuclear NMR spectroscopy in CD(3)CN-CDCl(3) showed that cation exchange is >10(4) faster than exchange of isoG 1 ligand in (isoG 1)(10)-Cs(+) Ph(4)B(-). The cationic guest also affected the kinetic stability of the complex. 2D-EXSY NMR experiments in CDCl(3) showed that ligand exchange was 2 orders of magnitude faster for the Li(+)-decamer than for the Cs(+)-decamer.     

Edge-bridging and face-capping coordination of alkenyl ligands in triruthenium carbonyl cluster complexes derived from hydrazines: synthetic, structural, theoretical, and kinetic studies

The reactions of the triruthenium cluster complex [Ru3(mu-H)(mu3-eta2-HNNMe2)(CO)9] (1; H2NNMe2=1,1-dimethylhydrazine) with alkynes (PhC triple bond CPh, HC triple bond CH, MeO2CC triple bond CCO2Me, PhC triple bond CH, MeO2CC triple bond CH, HOMe2CC triple bond CH, 2-pyC triple bond CH) give trinuclear complexes containing edge-bridging and/or face-capping alkenyl ligands. Whereas the edge-bridged products are closed triangular species (three Ru-Ru bonds), the face-capped products are open derivatives (two Ru-Ru bonds). For terminal alkynes, products containing gem (RCCH2) and/or trans (RHCCH) alkenyl ligands have been identified in both edge-bridging and face-capping positions, except for the complex [Ru3(mu3-eta2-HNNMe2)(mu3-eta3-HCCH-2-py)(mu-CO)(CO)7], which has the two alkenyl H atoms in a cis arrangement. Under comparable reaction conditions (1:1 molar ratio, THF at reflux, time required for the consumption of complex 1), some reactions give a single product, but most give mixtures of isomers (not all the possible ones), which were separated. To determine the effect of the hydrazido ligand, the reactions of [Ru3(mu-H)(mu3-eta2-MeNNHMe)(CO)9] (2; HMeNNHMe=1,2-dimethylhydrazine) with PhC triple bond CPh, PhC triple bond CH, and HC triple bond CH were also studied. For edge-bridged alkenyl complexes, the Ru--Ru edge that is spanned by the alkenyl ligand depends on the position of the methyl groups on the hydrazido ligand. For face-capped alkenyl complexes, the relative orientation of the hydrazido and alkenyl ligands also depends on the position of the methyl groups on the hydrazido ligand. A kinetic analysis of the reaction of 1 with PhC[triple chemical bond]CPh revealed that the reaction follows an associative mechanism, which implies that incorporation of the alkyne in the cluster is rate-limiting and precedes the release of a CO ligand. X-ray diffraction, IR and NMR spectroscopy, and calculations of minimum-energy structures by DFT methods were used to characterize the products. A comparison of the absolute energies of isomeric compounds (obtained by DFT calculations) helped rationalize the experimental results.     

Phosphine-substrate recognition through the C-H...O hydrogen bond: application to the asymmetric Pauson-Khand reaction

A unique methine moiety attached to three heteroatoms (O, P, S) and contained in the PuPHOS and CamPHOS ligands serves as a strong hydrogen-bond donor. Nonclassical hydrogen bonding of this methine with an amido-carbonyl acceptor provides a completely diastereoselective ligand exchange process between an alkyne dicobalthexacarbonyl complex and a phosphine ligand. This weak contact has been studied by means of X-ray analysis, 1H NMR, and quantum mechanical calculations and revealed that the present interaction falls in the range of strong C-H...O=C bonds. The hydrogen-bond bias obtained in the ligand exchange process has been exploited in the asymmetric intermolecular Pauson-Khand reaction to yield the corresponding cyclization adducts in up to 94% ee.     

Dynamics and extent of ligand exchange depend on electronic charge of metal nanoparticles

Both the rate and extent of ligand place exchange reactions between the hexanethiolate monolayer of Au(140) monolayer protected clusters (C6 MPCs) and dissolved 6-mercapto-1-hexanol thiol (HOC6SH) increase with increasing positive electronic charge on the Au cluster core. The rate constant of the ligand place exchange, taken at the early stage of the exchange, is increased by ca. 2-fold for reaction of +3 charged Au(140) cores as compared to neutral ones. The initially exchanged ligands are thought to reside mainly on edge and vertex sites of the Au(140) core, where the lability of the slightly more ionic Au[bond]S bonds there becomes further enhanced by removing electrons from the core. The reactions slow markedly after 35-50% of the original ligands have been replaced, continuing at a much slower pace for some time to reach an apparent reaction equilibrium. On +2 charged Au(140) cores, 85% of the C6 ligands have been exchanged with HOC(6)H(12)SH after 20 h. The slower phase of the reaction includes exchange of thiolate ligands on terrace lattice sites most of which--owing to the small sizes of the nanoparticle's Au(111) faces--are no more than one Au atom row removed from the nanoparticle edge sites. This slower exchange, the extent of which is also enhanced by positively charging the core, occurs either by intramolecular place exchange with edge sites that subsequently place-exchange with solution thiol or by direct place-exchange with solution thiol. Acid-base studies show that thiolate is more reactive in place exchange reactions than the corresponding thiol.     

Sulfur-containing alkenes—A new class of chelating ligands: Synthesis,coordination to palladium,and structure of the resulting complexes

Stable 1,2-disulfanylalkene palladium complexes [(RS-CH=CR′-SR)PdCl₂] were synthesized in 85–94% yield by reaction of palladium(II) chloride with sulfur-containing ligands RS-CH=C(R′)-SR (analogs of dithiolate ligands). The structure of the complexes was studied by NMR spectroscopy and quantum-chemical methods. The binding energy in palladium complexes with bis(arylsulfanyl)- and bis(alkylsulfanyl)alkenes was estimated (DFT) at 50 and 56 kcal/mol, respectively. Variation of substituents on the sulfur atoms is a convenient tool for fine tuning of the ligand properties and controlling the strength of the complex. The bite angle of the ligands does not depend on the substituent nature and is 88–89°, which is typical of square-planar complexes. According to the bite angle, the examined ligands are analogs of well known bidentate phosphine ligands, but the former are more labile since the corresponding binding energy is lower by 36 kcal/mol.     

Pyridinium-derived N-heterocyclic carbene complexes of platinum: synthesis, structure and ligand substitution kinetics

A series of [(R-iso-BIPY)Pt(CH(3))L ](+)X(-) complexes [R-iso-BIPY = N-(2-pyridyl)-R-pyridine-2-ylidene; (R = 4-H, 1; 4-tert-butyl, 2; 4-dimethylamino, 3; 5-dimethylamino, 4); L = SMe(2), b; dimethyl sulfoxide (DMSO), c; carbon monoxide (CO), d; X = OTf(-) = trifluoromethanesulfonate and/or [BPh(4)](-)] were synthesized by cyclometalation of the [R-iso-BIPY-H](+)[OTF](-) salts 1a-4a ([R-iso-BIPY-H](+) = N-(2-pyridyl)-R-pyridinium) with dimethylplatinum-micro-dimethyl sulfide dimer. X-ray crystal structures for 1b, 2c-4c as well as complexes having bipyridyl and cyclometalated phenylpyridine ligands, [(bipy)Pt(CH(3))(DMSO)](+) (5c) and (C(11)H(8)N)Pt(CH(3))(DMSO) (6c), have been determined. The pyridinium-derived N-heterocyclic carbene complexes display localized C-C and C-N bonds within the pyridinium ligand that are indicative of carbene pi-acidity. The significantly shortened platinum-carbon distance, for "parent" complex 1b, together with NMR parameters and the nu(CO) values for carbonyl cations 1d-4d support a degree of Pt-C10 multiple bonding, increasing in the order 3 < 4 < 2 < 1. Degenerate DMSO exchange kinetics have been determined to establish the nature and magnitude of the trans-labilizing ability of these new N-heterocyclic carbene ligands. Exceptionally large second-order rate constants (k(2) = 6.5 +/- 0.4 M(-1).s(-1) (3c) to 2300 +/- 500 M(-1).s(-1) (1c)) were measured at 25 degrees C using (1)H NMR magnetization transfer kinetics and variable temperature line shape analysis. These rate constants are as much as 4 orders of magnitude greater than those of a series of structurally similar cationic bis(nitrogen)-donor complexes [(N-N)Pt(CH(3))(DMSO)](+) reported earlier, and a factor of 32 to 1800 faster than an analogous charge neutral complex derived from cyclometalated 2-phenylpyridine, (C(11)H(8)N)Pt(CH(3))(DMSO) (k(2) = 0.21 +/- 0.02 M(-1).s(-1) (6c)). The differences in rate constant are discussed in terms of ground state versus transition state energies. Comparison of the platinum-sulfur distances with second order rate constants suggests that differences in the transition-state energy are largely responsible for the range of rate constants measured. The pi-accepting ability and trans-influence of the carbene donor are proposed as the origin of the large acceleration in associative ligand substitution rate.     

Hydrogen exchange rates in proteins from water (1)H transverse magnetic relaxation

Access to the fast exchange kinetics of labile protein hydrogens in solution is provided by exchange broadening of the water 1H NMR line. We analyzed the chemical shift modulation contribution of labile hydrogens in bovine pancreatic trypsin inhibitor (BPTI) to the transverse 1H spin relaxation rate, R2, of the bulk solvent. Both the experimental pH dependence and the CPMG dispersion of R2 could be quantitatively accounted for on the basis of known chemical shifts, exchange rates, and ionization constants for BPTI. This analysis provided, for the first time, the hydrogen exchange rate constants for Lys and Arg side chains in a protein and pointed to an internal catalysis of the N-terminal amino protons in BPTI by a salt bridge. The method can be used for mapping the hydrogen exchange rates in protein solutions and biomaterials, which may be important for the control of relaxation-weighted contrast in biological MRI.     

Isomerization dynamics in homo- and heterochiral atropoisomer copper(I) diimine complexes: a 2D EXSY NMR study

Two-dimensional exchange NMR spectroscopy has been employed to study the isomerization process of copper(I) complexes formed upon complexation of Cu+ with a racemic mixture of the atropoisomer diimine benzimidazole-pyridine ligands 1-3 and evaluate the configurational stability of the pseudotetrahedral complexes [Cu(1-3)2]PF6. Racemization of the heterochiral isomers RSLambda/RSDelta proceeds through an intramolecular ligand rearrangement on a time scale of about 1.9 s(-1) for 1, 4.4 s(-1) for 2, and 0.3 s(-1) for 3 in CD2Cl2 at room temperature. The intramolecular Lambda/Delta isomerizations in the homochiral diastereoisomers RRDelta/SSLambda and RRLambda/SSDelta of [Cu(1)2]PF6 proceed at room temperature on a time scale of about 0.6 s(-1) for the conversion of RRDelta/SSLambda into RRLambda/SSDelta and 13 s(-1) for the conversion of RRLambda/SSDelta into RRDelta/SSLambda. The kinetics of these intramolecular exchange processes were found to be sensitive to the stabilizing interligand pi-stacking interactions that develop within the [Cu(1-3)2]+ structure and to the bulkiness of the benzimidazole aryl substituents. The kinetics of racemization in the heterochiral RSLambda/RSDelta isomers of [Cu(3)2]PF6 with the bulky cumyl-derived ligand were 1 order of magnitude lower than in [Cu(2)2]PF6 with the tolyl-based ligand. Slower intermolecular ligand exchanges between all the isomers have also been shown to occur at ambient temperature in CD2Cl2 through complete ligand dissociation. Free energies at 298 K varying between 66.7 and 74.4 kJ.mol(-1) and entropies varying between -26.4 and 28.3 J.K(-1).mol(-1) were determined for the intramolecular Lambda/Delta isomerizations. For the intermolecular ligand exchanges free energies at 298 K varying between 55.6 and 62.5 kJ.mol(-1) and entropies varying between -97.9 and -74.5 J.K(-1).mol(-1) were measured.     

Bis(acetylacetonato)tricarbonyl tungsten(II): a convenient precursor to chiral bis(acac) tungsten(II) complexes

Two equivalents of acetylacetonate (acac) have been successfully introduced into a monomeric tungsten(II) coordination sphere. With the tetracarbonyltriiodotungsten(II) anion as a precursor, the formation of a tungsten(II) bis(acac) tricarbonyl complex, W(CO)3(acac)2, 1, has been accomplished. The addition of PMe3 or PMe2Ph to tricarbonyl complex 1 formed tungsten(II)bis(acac)dicarbonylphosphine complexes 2a and 2b, respectively. Single-crystal X-ray diffraction studies of the parent tricarbonyl complex, 1, and dicarbonyl trimethylphosphine complex 2a confirmed seven-coordinate geometries for both complexes. Variable-temperature 1H and 13C{1H} NMR spectroscopy revealed fluxional behavior for these seven-coordinate molecules: rapid exchange of the three carbon monoxide ligands in 1 was observed, and movement of the phosphine ligand through a mirror plane in a C(S) intermediate species was observed for both 2a and 2b. Tricarbonyl complex 1 reacted readily with alkyne reagents to form bis(acac)monocarbonylmonoalkynetungsten(II) complexes 3a (PhC(triple bond)CH) and 3b (MeC(triple bond)CMe). Variable-temperature 1H NMR spectroscopy was used to probe rotation of the alkyne ligand in 3a and 3b. The introduction of two alkyne ligands was accomplished thermally using excess PhC(triple bond)CPh to form bis(alkyne) complex 4 which was characterized crystallographically, as well as by 1H and 13C NMR spectroscopy. The availability of W(CO)3(acac)2 as a source of the W(acac)2 d4 moiety lies at the heart of the chemistry reported here.     

Metal exchange reactions in cadmium complexes with porphyrins of various structures

The reaction kinetics of the metal exchange Cd(II)-Cu(II) and Cd(II)-Zn(II) in the cadmium complexes (CdP) with porphyrin ligands (H₂P) differing by degree of stiffness (tetraphenylporphin, N-methyltetraphenylporphin, and tetraphenyltetrabenzoporphin) in the DMSO medium, was studied using spectrophotometric method. The rate of metal exchange reaction depends on the nature of the non-planatrity of H₂P in the structure of CdP complexes, as well as on the additional screening of the reaction center MN₄ by the extra-ligands and substituents. The reduction of the coordinating ability of the anion X⁻ in the structure of the solvate-salt of incoming metal M’X₂(Solv) _n−2 in a series: acetylacetonate > acetate > chloride > nitrate favors the metal exchange. In the most studied cases the reaction of CdP proceeds along a combined associative-dissociative mechanism. The order of the metal exchange reaction is found to be depending on temperature indicating a change in the contributions of associative and combined routes. The “pure” associative reaction mechanism in a medium of DMSO was for the first time found for the labile complex CdTPTBP with the saddle-type nonplanar ligand.     

Equilibrium and NMR studies on GdIII, YIII, CuII and ZnII complexes of various DTPA-N,N'-bis(amide) ligands. Kinetic stabilities of the gadolinium(III) complexes

Three DTPA-derivative ligands, the non-substituted DTPA-bis(amide) (L(0)), the mono-substituted DTPA-bis(n-butylamide) (L(1)) and the di-substituted DTPA-bis[bis(n-butylamide)] (L(2)) were synthesized. The stability constants of their Gd3+ complexes (GdL) have been determined by pH-potentiometry with the use of EDTA or DTPA as competing ligands. The endogenous Cu2+ and Zn2+ ions form ML, MHL and M(2)L species. For the complexes CuL(0) and CuL(1) the dissociation of the amide hydrogens (CuLH(-1)) has also been detected. The stability constants of complexes formed with Gd3+, Cu2+ and Zn2+ increase with an increase in the number of butyl substituents in the order ML(0) < ML(1) < ML(2). NMR studies of the diamagnetic YL(0) show the presence of four diastereomers formed by changing the chirality of the terminal nitrogens of their enantiomers. At 323 K, the enantiomerization process, involving the racemization of central nitrogen, falls into the fast exchange range. By the assignment and interpretation of 1H and 13C NMR spectra, the fractions of the diastereomers were found to be equal at pH = 5.8 for YL(0). The kinetic stabilities of GdL(0), GdL(1) and GdL(2) have been characterized by the rates of the exchange reactions occurring between the complexes and Eu3+, Cu2+ or Zn2+. The rates of reaction with Eu3+ are independent of the [Eu3+] and increase with increasing [H+], indicating the rate determining role of the proton assisted dissociation of complexes. The rates of reaction with Cu2+ and Zn2+ increase with rising metal ion concentration, which shows that the exchange can take place with direct attack of Cu2+ or Zn2+ on the complex, via the formation of a dinuclear intermediate. The rates of the proton, Cu2+ and Zn2+ assisted dissociation of Gd3+ complexes decrease with increasing number of the n-butyl substituents, which is presumably the result of steric hindrance hampering the formation or dissociation of the intermediates. The kinetic stabilities of GdL(0) and GdL(1) at pH = 7.4, [Cu2+] = 1 x 10(-6) M and [Zn(2+)] = 1 x 10(-5) M are similar to that of Gd(DTPA)2-, while the complex GdL2 possesses a much higher kinetic stability.     

Reactions of the (2-pyridyl) pyrrolide platinum(II) complex driven by sterically encumbered chelation: a model for the reversible attack of alcohol at the coordinated carbon monoxide

Treatment of 3,5-bis(trifluoromethyl)-2-(2'-pyridyl)pyrrole (fpyroH) with Pt(DMSO)2Cl2 and Na2CO3 in THF solution gave a light-yellow complex denoted as [Pt(fpyro)2] (1). A single-crystal X-ray diffraction study on 1 revealed a large conformational distortion around the platinum(II) center, which is attributed to interligand repulsion between the pyridyl groups and the CF3 substituents of the nearby pyrrolides. Reaction of 1 with N- and C-donor ligands such as acetonitrile, pyridine, isocyanide, and CO affords the adducts [Pt(fpyro)2(L)], L = NCMe (2), pyridine (3), CNBut (4), and CO (5), showing formation of one monodentate fpyro ligand by release of the strain energy. The variable-temperature 1H NMR studies showed a static structure for the N-substituted adducts 2 and 3, whereas the C-adducts 4 and 5 are shown to be more labile, displaying a pairwise exchange of bidentate and monodentate fpyro ligands in solution. Addition of ethanol to the coordinated CO in 5 during recrystallization is also established, affording an ethoxycarbonyl complex [Pt(fpyro)(fpyroH)(CO2Et)] (6), which was isolated as a crystalline solid and can be readily converted back to 5 and free ethanol upon dissolution at room temperature.     

Pairwise exchanges of oxo and imido groups in rhenium(VII) compounds

The kinetic and thermodynamic parameters for the oxo and imido exchange reactions among MeReO(3), MeReO(2)(NR), MeReO(NR)(2), and MeRe(NR)(3) (R = 1-adamantyl, Ad; or 2,6-diisopropylphenyl, Ar) have been measured. The rate constant for the NAr series decreases from 0.27 to 0.0024 L mol(-1) s(-1) at 25 degrees C in benzene as the total number of participating imido groups increases from 2 to 4, indicating that steric effects play an important role in the kinetics of the ligand exchange reactions. But, with NAd, the values of k/L mol(-1) s(-1) are 0.2 (4 NAd), 100 (3 NAd), and 0.74 (2 NAd). The equilibrium constants, also subject to steric effects, are much larger than those predicted by ligand combination statistics and greatly favor the mixed oxo-imido compounds. The different steric demands by imido and oxo ligands are believed to be the main factor for the larger equilibrium constants because the equilibrium constant shows minimal dependence on temperature. The large negative activation entropies for the ligand exchange reactions are consistent with a metathesis mechanism featuring nearly concurrent interchange of oxo and imido groups.