Detailed structure of hairy mixed micelles formed by phosphatidylcholine and PEGylated phospholipids in aqueous media

Aqueous dispersions of mixed egg yolk phosphatidylcholine (PC) and poly(ethylene glycol) (PEG) modified distearoyl phosphatidylethanolamine (DSPE) were investigated with the purpose of determining shape, size, and conformation of the formed mixed micelles. The samples were prepared at a range of DSPEPEG to PC molar ratios ([DSPEPEG/PC] from 100:0 to 30:70) and with, respectively, DSPEPEG2000 and DSPEPEG5000, where 2000 and 5000 refer to the molar masses of the PEG chains. Particle shape and internal structure were studied using small-angle X-ray scattering (SAXS) and small-angle neutron scattering (SANS). The contrast of the micelles is different for X-rays and neutrons, and by combining SANS and SAXS, complementary information about the micelle structure was obtained. The detailed structure of the micelles was determined in a self-consistent way by fitting a model for the micelles to SANS and SAXS data simultaneously. In general, a model for the micelles with a hydrophobic core, surrounded by a dense hydrophilic layer that is again surrounded by a corona of PEG chains in the form of Gaussian random coils attached to the outer surface, is in good agreement with the scattering data. At high DSPEPEG contents, nearly spherical micelles are formed. As the PC content increases the micelles elongate, and at a DSPEPEG/PC ratio of 30:70, rodlike micelles longer than 1000 angstroms are formed. We demonstrate that by mixing DSPEPEG and PC a considerable latitude in controlling the particle shape is obtained. Our results indicate that the PEG chains in the corona are in a relatively unperturbed Gaussian random coil conformation even though the chains are far above the coil-coil overlap concentration and, therefore, interpenetrating. This observation in combination with the observed growth behavior questions that the "mushroom-brush"transition is the single dominating factor for determining the particle shape as assumed in previous theoretical work (Hristova, K.; Needham, D. Macromolecules 1995, 28, 991-1002).     

Effects of poly(ethylene glycol) (PEG) concentration on the permeability of PEG-grafted liposomes

Poly(ethylene glycol)-grafted liposomes (PEG-liposomes) were prepared from dipalmitoylphosphatidylcholine (DPPC) with various amounts of distearoyl-N-monomethoxy poly(ethylene glycol)-succinyl-phosphatidylethanolamines (DSPE-PEG) with PEG molecular weights of 1000, 2000, 3000 and 5000. The effects of DSPE-PEG concentration on the permeability of PEG-liposomes were investigated using carboxyfluorescein (CF). In the gel state, the CF leakage from PEG-liposomes was decreased with increasing mole fractions of DSPE-PEG for all PEG molecular weights. In the liquid-crystalline state, the CF leakage from PEG-liposomes containing DSPE-PEG1000 gradually increased with increasing mole fractions of DSPE-PEG, while that of PEG-liposomes whose molecular weight in PEG units was above 2000 rapidly decreased by the addition of DSPE-PEG. Furthermore, no effect of PEG molecular weight on CF leakage was observed. The relationship between the fluorescence polarization of 1,6-diphenyl-1,3,5-hexatriene (DPH) (or 1-(4-trimethylammoniumphenyl)-6-phenyl-1,3,5-hexatriene (TMA-DPH)) and the mole fraction of DSPE-PEG for PEG-liposomes was also investigated. No significant changes in fluorescence polarization of DPH for liposomal bilayer membranes was observed in the gel and liquid-crystalline states due to the addition of DSPE-PEG, while that of TMA-DPH was decreased compared with that of liposomes without DSPE-PEG in both states.     

Calorimetry and cryo-transmission electron microscopic studies of PEG2000-grafted liposomes

The phase behavior of poly(ethylene glycol) grafted liposomes (PEG-liposomes) was investigated by differential scanning calorimetry (DSC), dynamic light scattering (DLS) and cryo-transmission electron microscopy (cryo-TEM). PEG-liposomes were prepared from mixtures of dipalmitoyl phosphatidylcholine (DPPC) and distearoyl phosphatidylethanolamine with a covalently attached PEG molecular weight of 2000 (DSPE-PEG2000). From the results of DLS measurements, the coexistence of PEG-liposomes and small molecular assemblies were confirmed at mole fractions of DSPE-PEG2000 above about 0.1. Moreover, it was confirmed that small molecular assemblies were disk micelles by cryo-TEM. However, the phase transition enthalpies of PEG-liposomes were hardly changed according to the DSC measurement, though the mole fraction of the PEG lipid increased. From these results, it was suggested that the phase transition enthalpies hardly changed despite mixed micelles being formed because the bilayer structure of the disk micelle maintains high cooperativity between the DPPC molecules.     

Mixing behavior of a poly(ethylene glycol)-grafted phospholipid in monolayers at the air/water interface

Mixed phospholipid monolayers hosting a poly(ethylene glycol) (PEG)-grafted distearoylphosphatidylethanolamine with a PEG molecular weight of 5000 (DSPE-PEG5000) spread at the air/water interface were used as model systems to study the effect of PEG-phospholipids on the lateral structure of PEG-grafted membrane-mimetic surfaces. DSPE-PEG5000 has been found to mix readily with distearoylphosphoethanolamine-succinyl (DSPE-succynil), a phospholipid whose structure resembles closely that of the phospholipid part of the DSPE-PEG5000 molecule. However, properties of mixed monolayers such as morphology and stability varied significantly with DSPE-PEG5000 content. In particular, our surface pressure, epifluorescence microscopy (EFM), and Brewster angle microscopy (BAM) studies have shown that mixtures containing 1-9 mol % of DSPE-PEG5000 form stable condensed monolayers with no sign of microscopic phase separation at surface pressures above approximately 25 mN/m. Yet, at 1 mol % of DSPE-PEG5000 in mixed monolayers, the two components have been found to behave nearly immiscibly at surface pressures below approximately 25 mN/m. For monolayers containing 18-75 mol % of DSPE-PEG5000, a high-pressure transition has been observed in the low-compressibility region of their isotherms, which has been identified on the basis of continuous BAM imaging of monolayer morphology, as reminiscent of the collapse nucleation in a pure DSPE-PEG5000 monolayer. Thus, the comparative analysis of our surface pressure, EFM, and BAM data has revealed that there exists a rather narrow range of mixture compositions with DSPE-PEG5000 content between 3 and 9 mol %, where somewhat homogeneous distribution of DSPE-PEG5000 molecules and high pressure stability can be achieved. This finding can be useful to "navigating" through possible mixture compositions while developing guidelines to the rational design of membrane-mimetic surfaces with highly controlled bio-nonfouling properties.     

Carboxyfluorescein leakage from poly(ethylene glycol)-grafted liposomes induced by the interaction with serum

The effects of fetal bovine serum (FBS) on carboxyfluorescein (CF) leakage from poly(ethylene glycol)-grafted liposomes (PEG-liposomes) were investigated. PEG-liposomes were prepared from dipalmitoylphosphatidylcholine (DPPC) and distearoyl-N-monomethoxy poly(ethylene glycol)-succinyl-phosphatidylethanolamines (DSPE-PEG) having PEG molecular weights of 1000, 2000, 3000 and 5000. The presence of FBS dramatically increased CF leakage from liposomes near the gel-liquid crystalline phase transition temperature, but had little effect at lower and higher temperatures. The CF leakage from PEG-liposomes whose molecular weight in PEG units was above 2000 was suppressed compared with that of liposomes without PEG. And, there was hardly any difference in the effect of the PEG molecular weight of the PEG-lipids on CF leakage from PEG-liposomes with FBS when PEG-lipids with a molecular weight in PEG units above 2000 were used. On the other hand, the leakage of CF from liposomes containing 0.145 mol fractions of DSPE-PEG1000 was larger than that of liposomes without PEG. Furthermore, the effects of FBS on the cooperative units of lipid molecules during the gel-liquid crystalline phase transition of liposomes were examined. However, the cooperative units of liposomes with FBS had little change compared with that of liposomes without FBS.     

Effects of poly(ethylene glycol) (PEG) chain length of PEG-lipid on the permeability of liposomal bilayer membranes

The effects of poly(ethylene glycol) (PEG) chain length of PEG-lipid on the membrane characteristics of liposomes were investigated by differential scanning calorimetry (DSC), freeze-fracture electron microscopy (FFEM), fluorescence polarization measurement and permeability measurement using carboxyfluorescein (CF). PEG-liposomes were prepared from mixtures of dipalmitoyl phosphatidylcholine (DPPC) and distearoyl phosphatidylethanolamines with covalently attached PEG molecular weights of 1000, 2000, 3000 and 5000 (DSPE-PEG). DSC and FFEM results showed that the addition of DSPE-PEG to DPPC in the preparation of liposomes caused the lateral phase separation both in the gel and liquid-crystalline states. The fluidity in the hydrocarbon region of liposomal bilayer membranes was not significantly changed by the addition of DSPE-PEG, while that in the interfacial region was markedly increased. From these results, it was anticipated that the CF leakage from PEG-liposomes is accelerated compared with DPPC liposomes. However, CF leakage from liposomes containing DSPE-PEG with a 0.060 mol fraction was depressed compared with regular liposomes, and the leakage decreased with increasing PEG chain length. Furthermore, the CF leakage from liposomes containing DSPE-PEG with a 0.145 mol fraction was slightly increased compared with that of liposomes containing DSPE-PEG with a 0.060 mol fraction. It is suggested that the solute permeability from the PEG-liposomes was affected by not only properties of the liposomal bilayer membranes such as phase transition temperature, phase separation and membrane fluidity, but also the PEG chain of the liposomal surface.     

Structure and dynamics of highly PEG-ylated sterically stabilized micelles in aqueous media

Molecular assemblies of highly PEG-ylated phospholipids are important in many biomedical applications. We have studied sterically stabilized micelles (SSMs) of self-assembled DSPE–PEG2000 in pure water and isotonic HEPES-buffered saline solution. The observed SSM sizes of 2–15 nm largely depend on the solvent and the lipid concentration used. The critical micelle concentration of DSPE–PEG2000 is 10 times higher in water than in buffer, and the viscosity of the dispersion dramatically increases with the lipid concentration. To explain the experimentally observed results, we performed atomistic molecular dynamics simulations of solvated SSMs. Our modeling revealed that the observed assemblies have very different aggregation numbers (N(agg) ≈ 90 in saline solution and N(agg) < 8 in water) because of very different screening of their charged PO4(–) groups. We also demonstrate that the micelle cores can inflate and their coronas can fluctuate strongly, thus allowing storage and delivery of molecules with different chemistries.     

Surfactant--polymer aggregates formed by sodium dodecyl sulfate, poly(N-vinyl-2-pyrrolidone), and poly(ethylene glycol)

The interaction of sodium dodecyl sulfate (SDS) in aqueous solution with poly(N-vinyl-2-pyrrolidone) (M(w) = 55,000 g/mol) in the presence of poly(ethylene glycol) (M(w) = 8000 g/mol) is investigated by electrical conductivity, zeta potential measurements, viscosity measurements, fluorescence spectroscopy, and small-angle X-ray scattering (SAXS). The results indicate that SDS-polymer interaction occurs at low surfactant concentration, and its critical aggregation concentration is fairly dependent on polymer composition. The polymer-supported micelles have average aggregation numbers dependent on surfactant concentration, are highly dissociated when compared with aqueous SDS micelles, and have zeta potentials that increase linearly with the fraction of PVP at constant SDS concentration. The analysis of the SAXS measurements indicated that the PVP/PEG/SDS system forms surface-charged aggregates of a cylindrical shape with an anisometry (length to cross-section dimension ratio) of about 3.0.     

Bimodal polymer mushrooms: compressive forces and specificity toward receptor surfaces

End-grafted poly(ethylene glycol) (or PEG) polymer chains are used to extend the in vivo circulation time of targeted liposomes and nanoparticles; however, the most efficacious structure for also imparting high target specificity remains unknown. Using the surface force apparatus, we have measured the specific and nonspecific forces between bimodal mixtures of grafted polymer mushrooms and model receptor surfaces. Specifically, supported lipid membranes anchoring 2000 or 5000 Da PEG with a controlled fraction of PEG(2000) bearing biotin ligands were compressed against opposing streptavidin surfaces. The presence of the longer 5000 Da chain increased the steric repulsion of the bimodal mushroom layer and thus decreased the net adhesive force when shorter chains were ligated. However, the 5000 Da chain did not detectably alter the distance where ligand-receptor binding occurs and adhesion begins. This latter result is in good agreement with theoretical predictions based on summing the repulsive steric and attractive bridging forces. Further, all ligated structures adhered to receptors under both static and dynamic fluid flow conditions. The dynamic movement of the flexible PEG tethers permitted ligand-receptor bonds to form far beyond the equilibrium edge of the bimodal mushroom layer. This work demonstrates that liposome targeting should be enhanced by grafting ligands to liposomes with a tether that has a contour length longer than the equilibrium height of the bimodal mushroom layer.     

Physicochemical properties of PEG-grafted liposomes

Egg phosphatidylcholine (EggPC) or dimyristoylphosphatidylcholine (DMPC) liposomes containing polyethylene glycol (PEG)-lipids covering a range of 0-30 mol% have been prepared by Extrusion method. The physicochemical properties including size evolution and calcein permeation were evaluated to investigate the effect of PEG-lipids on bilayer structure. The results from quasielasetic light scattering (QELS), freeze-fracture microscopy, and gel exclusion chromatography revealed that presence of low concentration of PEG-lipid results in decreasing of vesicle size and further increase in the PEG-lipid concentrations lead to a transition from the lamellar membranes to micelles. The permeability for calcein increased with increase in concentration of distearoylphosphatidylethanolamine (DSPE)-PEG. On the other hand, the permeability decreased with low amount of cholesterol-PEG (blow 20% cholesterol-PEG) and increased with high amount of it. The maximum concentration of PEG-lipid that may be incorporated without alteration of the liposome structure depends on the composition of the bilayer. The concentration of DSPE-PEG2000 incorporated into vesicles without damaging vesicle structures were <20 mol% for EggPC and <10% for DMPC.     

Polyethylene glycol-polyamidoamine dendritic micelle as solubility enhancer and the effect of the length of polyethylene glycol arms on the solubility of pyrene in water

Unimolecular dendritic micelles designed as solubility enhancers were obtained by coupling polyethylene glycol (PEG) to Starburst polyamidoamine (PAMAM) dendrimers. Micelles-750, -2000, and -5000 have a generation 3.0 dendrimer core (32 primary amine end groups) and PEG arms with molecular weights of 750, 2000, and 5000, respectively. The conjugate of dendrimer core and PEG was characterized by MALDI-TOF MS and 1H NMR. 1H NMR was also used to estimate the average number of PEG arms on each dendrimer molecule. A typical hydrophobic compound, pyrene, was sonicated in an excess amount together with micelles at 50 degrees C for 6 h to produce its saturated water solution. The change of the solubility of pyrene was monitored at 334 nm, its maximum adsorption wavelength, by UV-VIS spectra. Concentrated micelles tended to dissolve more pyrene. However, there is no obvious linear relationship between micelle type and the amount of pyrene entrapped within micelles. Micelle-2000 could solubilize more pyrene than micelle-750. It is hypothesized that micelle-5000 did not solubilize more pyrene than micelle-2000 because of the PEG shell disruption by adjacent interpenetration of individual micelles when PEG arm length increased.     

Surface presentation of bioactive ligands in a nonadhesive background using DOPA-tethered biotinylated poly(ethylene glycol)

We have developed surfaces for the selective presentation of biotinylated peptides and proteins in a background that resists nonspecific protein adsorption; controlled amounts of biotinylated poly(ethylene glycol) (MW 3400 Da; PEG3400) anchored to titanium-dioxide-coated surfaces via an adhesive tri-peptide sequence of L-3,4-dihydroxyphenylalanine (DOPA3-PEG3400-biotin; DPB) were incorporated within a DOPA3-PEG2000 background. Using optical waveguide lightmode spectroscopy, we found that the amounts of sequentially adsorbed NeutrAvidin and singly biotinylated molecules increased proportionally with the amount of DPB in the surface. Biotinylated peptides (MW approximately 2000 Da) were able to fill all three of the remaining avidin-binding sites, while only one molecule of biotinylated PEG5000 or stem cell factor bound to each avidin. The resulting biotin-avidin-biotin linkages were stable for prolonged periods under continuous perfusion, even in the presence of excess free biotin. Hematopoietic M07e cells bound to immobilized peptide ligands for alpha5beta1 (cyclic RGD) and alpha4beta1 (cylic LDV) integrins in a DPB-dose-dependent manner, with near-maximal binding to cylic LDV for surfaces containing 1% DPB. Multiple ligands were adsorbed in a controlled manner by incubating NeutrAvidin with the respective ligands in the desired molar ratio and then adding the resulting complexes to DPB-containing surfaces. Cell adhesion to surfaces containing both cylic LDV and cyclic RGD increased in an additive manner compared to that for the individual ligands. The bioactivity of adsorbed biotinylated stem cell factor was retained, as demonstrated by DPB-dose-dependent M07e cell adhesion and ERK1/2 activation.     

Hydrophilization of Magnetic Nanoparticles with Modified Alternating Copolymers. Part 1: The Influence of the Grafting

Iron oxide nanoparticles (NPs) with a diameter 21.6 nm were coated with poly(maleic acid-alt-1-octadecene) (PMAcOD) modified with grafted 5,000 Da poly(ethyelene glycol) (PEG) or short ethylene glycol (EG) tails. The coating procedure utilizes hydrophobic interactions of octadecene and oleic acid tails, while the hydrolysis of maleic anhydride moieties as well as the presence of hydrophilic PEG (EG) tails allows the NP hydrophilicity. The success of the NP coating was found to be independent of the degree of grafting which was varied between 20 and 80% of the -MacOD-units, but depended on the length of the grafted tail. The NP coating and hydrophilization did not occur when the modified copolymer contained 750 Da PEG tails independently of the grafting degree. To explain this phenomenon the micellization of the modified PMAcOD copolymers in water was analyzed by small angle x-ray scattering (SAXS). The PMAcOD molecules with the grafted 750 Da PEG tails form compact non-interacting disk-like micelles, whose stability apparently allows for no interactions with the NP hydrophobic shells. The PMAcOD containing the 5,000 Da PEG and EG tails form much larger aggregates capable of an efficient coating of the NPs. The coated NPs were characterized using transmission electron microscopy, dynamic light scattering, ζ-potential measurements, and thermal gravimetry analysis. The latter method demonstrated that the presence of long PEG tails in modified PMAcOD allows the attachment of fewer macromolecules (by a factor of ~20) compared to the case of non-modified or EG modified PMAcOD, emphasizing the importance of PEG tails in NP hydrophilization. The NPs coated with PMAcOD modified with 60% (towards all -MAcOD- units) of the 5,000 PEG tails bear a significant negative charge and display good stability in buffers. Such NPs can be useful as magnetic cores for virus-like particle formation.     

Structure of mixed micelles formed in PEG-lipid/lipid dispersions

Polyethylene glycol (PEG)-conjugated lipids are commonly employed for steric stabilization of liposomes. When added in high concentrations PEG-lipids induce formation of mixed micelles, and depending on the lipid composition of the sample, these may adapt either a discoidal or a long threadlike shape. The factors governing the type of micellar aggregate formed have so far not been investigated in detail. In this study we have systematically varied the lipid composition in lipid/PEG-lipid mixtures and characterized the aggregate structure by means of cryo-transmission electron microscopy (cryo-TEM). The effects caused by adding sterols, phosphatidylethanolamines, and phospholipids with saturated acyl chains to egg phosphatidylcholine/1,2-distearoyl-sn-glycero-3-phosphatidylethanolamine-N-[methoxy(polyethylene glycol)-2000 (EPC/DSPE-PEG2000) mixtures with a fixed amount (25 mol %) of DSPE-PEG2000 was studied. Further, the aggregate structure in 1,2-dimyristoyl-sn-glycero-3-phosphatidylcholine/1,2-dimyristoyl-sn-glycero-3-phosphatidylethanolamine-N-[methoxy(polyethylene glycol)-2000] (DMPC/DMPE-PEG2000) samples above and below the gel to liquid crystalline phase transition temperature (TC) was investigated. Our results revealed that lipid components, as well as environmental conditions, that reduce the lipid spontaneous curvature and increase the monolayer bending modulus tend to promote formation of discoidal micelles. At temperatures below the gel-to-liquid crystalline phase transition temperature reduced lipid/PEG-lipid miscibility, furthermore, likely contribute to the observed formation of discoidal rather than threadlike micelles.     

Calorimetric investigation of the interaction between lithium perfluorononanoate and poly(ethylene glycol) oligomers in water

The interaction of lithium perfluorononanoate (LiPFN) with poly(ethylene glycol) (PEG) molecules of different molecular weights (300 < MW < 20000 Da) has been investigated in water at 298.15 and 308.15 K by isothermal titration calorimetry (ITC). Density, viscosity, and conductivity measurements were also performed at 298.15 K. The aggregation process of this surfactant on the PEG polymeric chain was found to be very similar to that exhibited by cesium perfluorooctanoate (CsPFO) and appears to be consistent with the necklace model. ITC titrations indicated that a fully formed LiPFN micellar cluster can be wrapped by a PEG chain having a molecular weight (MW) of approximately 3200 Da, longer than that required by the shorter perfluorooctanoate (MW approximately 2600 Da), and also suggested a stepwise mechanism for the aggregation of successive micelles. Viscosity data indicate that the formation of polymer-surfactant complexes between PEG and LiPFN involves a conformational change of the polymer. The aggregation of preformed micelles of LiPFN or CsPFO or SDS on the PEG polymeric chain always gives rise to further stabilization.     

Dynamic and static light scattering studies on self-aggregation behavior of biodegradable amphiphilic poly(ethylene oxide)-poly[(R)-3-hydroxybutyrate]-poly(ethylene oxide) triblock copolymers in aqueous solution

The self-aggregation behavior of two amphiphilic poly(ethylene oxide)-poly[(R)-3-hydroxybutyrate]-poly(ethylene oxide) (PEO-PHB-PEO) triblock copolymer samples with nearly identical PHB block lengths but different PEO block lengths, PEO-PHB-PEO(2000-810-2000) and PEO-PHB-PEO(5000-780-5000), was studied with dynamic and static light scattering (DLS and SLS), in combination with fluorescence spectroscopy and transmission electron microscopy (TEM). The formation of polymeric micelles by the two PEO-PHB-PEO triblock copolymers was confirmed with fluorescence technique and TEM. DLS analysis showed that the hydrodynamic radius (R(h)) of the monodistributed polymeric micelles increased with an increase in PEO block length. The relative thermostability of the triblock copolymer micelles was studied by SLS and DLS at different temperatures. The aggregation number and the ratio of the radius of gyration over hydrodynamic radius were found to be independent of temperature, probably due to the strong hydrophobicity of the PHB block. The combination of DLS and SLS studies indicated that the polymeric micelles were composed of a densely packed core of hydrophobic PHB blocks and a corona shell formed by hydrophilic PEO blocks. The aggregation numbers were found to be approximately 53 for PEO-PHB-PEO(2000-810-2000) micelles and approximately 37 for PEO-PHB-PEO(5000-780-5000) micelles. The morphology of PEO-PHB-PEO spherical micelles determined by DLS and SLS measurements was further confirmed by TEM.     

Wormlike micelle formation and flow alignment of a pluronic block copolymer in aqueous solution

The self-assembly into wormlike micelles of a poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) triblock copolymer Pluronic P84 in aqueous salt solution (2 M NaCl) has been studied by rheology, small-angle X-ray and neutron scattering (SAXS/SANS), and light scattering. Measurements of the flow curves by controlled stress rheometry indicated phase separation under flow. SAXS on solutions subjected to capillary flow showed alignment of micelles at intermediate shear rates, although loss of alignment was observed for high shear rates. For dilute solutions, SAXS and static light scattering data on unaligned samples could be superposed over three decades in scattering vector, providing unique information on the wormlike micelle structure over several length scales. SANS data provided information on even shorter length scales, in particular, concerning "blob" scattering from the micelle corona. The data could be modeled based on a system of semiflexible self-avoiding cylinders with a circular cross-section, as described by the wormlike chain model with excluded volume interactions. The micelle structure was compared at two temperatures close to the cloud point (47 degrees C). The micellar radius was found not to vary with temperature in this region, although the contour length increased with increasing temperature, whereas the Kuhn length decreased. These variations result in an increase of the low-concentration radius of gyration with increasing temperature. This was consistent with dynamic light scattering results, and, applying theoretical results from the literature, this is in agreement with an increase in endcap energy due to changes in hydration of the poly(ethylene oxide) blocks as the temperature is increased.     

Looped structure of flowerlike micelles revealed by 1H NMR relaxometry and light scattering

We present experimental proof that so-called "flowerlike micelles" exist and that they have some distinctly different properties compared to their "starlike" counterparts. Amphiphilic AB diblock and BAB triblock copolymers consisting of poly(ethylene glycol) (PEG) as hydrophilic A block and thermosensitive poly(N-isopropylacrylamide) (pNIPAm) B block(s) were synthesized via atom transfer radical polymerization (ATRP). In aqueous solutions, both block copolymer types form micelles above the cloud point of pNIPAm. Static and dynamic light scattering measurements in combination with NMR relaxation experiments proved the existence of flowerlike micelles based on pNIPAm(16kDa)-PEG(4kDa)-pNIPAm(16kDa) which had a smaller radius and lower mass and aggregation number than starlike micelles based on mPEG(2kDa)-pNIPAm(16kDa). Furthermore, the PEG surface density was much lower for the flowerlike micelles, which we attribute to the looped configuration of the hydrophilic PEG block. (1)H NMR relaxation measurements showed biphasic T(2) relaxation for PEG, indicating rigid PEG segments close to the micelle core and more flexible distal segments. Even the flexible distal segments were shown to have a lower mobility in the flowerlike micelles compared to the starlike micelles, indicating strain due to loop formation. Taken together, it is demonstrated that self-assemblies of BAB triblock copolymers have their hydrophilic block in a looped conformation and thus indeed adopt a flowerlike conformation.     

Gelation of Covalently Cross-Linked PEG-Heparin Hydrogels

We study PEG-heparin hydrogels to identify compositions that lead to gel formation and measure the corresponding gelation kinetics. The material consists of a maleimide-functionalized high molecular weight heparin (HMWH) backbone covalently cross-linked with bis-thiol poly(ethylene glycol) (PEG). Using multiple particle tracking microrheology, we investigate a broad composition space, defined by the number of maleimide functional sites per HMWH (f = 3.9-11.8), the molecular weight of the PEG cross-linker (M(n) = 2000, 5000, and 10 000), and the concentrations of the heparin and PEG polymers. Gelation kinetics are characterized by time-cure superposition, yielding the gel time, t(c), and the critical relaxation exponent, n. Gelation times range from 5 < t(c) ≤ 45 min, with the fastest kinetics occurring for the highest HMWH maleimide functionalities. t(c) depends nonmonotonically on the PEG cross-linker molecular weight, suggesting that gelation is affected by the length of the cross-linker relative to intermolecular interactions between heparin molecules. The critical relaxation exponent decreases from n = 0.52 for PEG 2000 to n = 0.39 for PEG 10 000. Finally, 219 equilibrated samples taken over the entire composition space are identified as liquid or solid, defining the "gelation envelope". The boundaries of this empirical gelation envelope are in good agreement with Flory-Stockmayer theory. In all, microrheological measurements enable characterization over a large parameter space and provide crucial insight into the gelation of complex, multifunctional hydrogelators used in therapeutic applications.     

Investigation of the hydration of nonfouling material poly(ethylene glycol) by low-field nuclear magnetic resonance

The strong surface hydration layer of nonfouling materials plays a key role in their resistance to nonspecific protein adsorption. Poly(ethylene glycol) (PEG) is an effective example of materials that can resist nonspecific protein adsorption and cell adhesion. Thus, the strong interaction between water molecules and PEG was investigated through each T(2) component in water/PEG mixtures using multiexponential inversion of T(2) relaxation time measured by the Carr-Purcell-Meiboom-Gill (CPMG) sequence of low-field nuclear magnetic resonance (LF-NMR). Results show that about one water molecule is tightly bound with one ethylene glycol (EG) unit, and additional water molecules over 1:1 ratio mainly swell the PEG matrix and are not tightly bound with PEG. This result was also supported by the endothermic behavior of water/PEG mixtures measured by differential scanning calorimetry (DSC). It is believed that the method developed could be also applied to investigate various interactions between macromolecules and other small molecules without using deuterium samples, which might open a novel route to quantitatively measure guest-host interactions in the future.