Recent advances and future trends in molecularly imprinted polymers-based sample preparation

Molecular imprinting technology is a well-established technique for the obtainment of tailor-made polymers, so-called molecularly imprinted polymers, with a predetermined selectivity towards a target analyte or structurally related compounds. Accordingly, molecularly imprinted polymers are considered excellent materials for sample preparation providing unprecedented selectivity to analytical methods. However, the use of molecularly imprinted polymers in sample preparation still presents some shortcomings derived from the synthesis procedure itself limiting its general applicability. In this regard, molecularly imprinted polymers use to display binding sites heterogeneity and slow diffusion mass transfer of analytes to the imprinted sites affecting their overall performance. Besides, the performance of molecularly imprinted polymers in organic solvents is excellent, but their selective binding ability in aqueous media is considerably reduced. Accordingly, the present review pretends to provide an updated overview of the recent advances and trends of molecularly imprinted polymers-based extraction, focusing on those strategies proposed for the improvement of mass transfer and selective recognition in aqueous media. Besides, with the progressive implementation of Green Chemistry principles, the different steps and strategies for the preparation of molecularly imprinted polymers are reviewed from a green perspective.     

Multisample preparation methods for the solvent-free MALDI-MS analysis of synthetic polymers

A limitation of any current approach using solvent-free MALDI mass spectrometry is that only one sample at a time can be prepared and transferred to the MALDI-plate. For this reason, multiple-sample preparation approaches for solvent-free MALDI MS analysis of synthetic polymers were developed that are simple and practical. One approach multiplexed sample preparation by simultaneously preparing multiple samples. With this approach, as many as 384 samples could be prepared by addition of analyte, matrix, salt, and 1-mm metal beads to each well of a 384-well disposable bacti plate, capping the plate with the lid and homogenizing all samples simultaneously using a common laboratory vortex device. Besides the time savings achieved by a single vortex step for multiple samples, an additional advantage of this method relative to previously reported solvent-free preparation methods is that the mixing volume per sample is reduced, which allows a reduction in the amount of analyte required. This method, however, still requires the transfer of each homogenized sample to the MALDI plate for subsequent analysis. Here we report a novel approach that combines multiple simultaneous solvent-free sample preparation with automatic sample transfer to the MALDI target plate. This approach reduces the possibility of cross-contamination, the amount of sample and matrix consumed for an analysis, and the time required for preparation of multiple samples. These methods were shown to provide high-quality mass spectra for various synthetic polymer standards with M(n) values to 10 kDa. The methods are efficient in that small sample amounts are required, the sample/salt/matrix ratio is not critical, and the time necessary to achieve sufficient homogenization of multiple samples is less than 5 min.     

Extending the solvent-free MALDI sample preparation method

Matrix-assisted laser desorption/ionization (MALDI) mass spectrometry is an important technique to characterize many different materials, including synthetic polymers. MALDI mass spectral data can be used to determine the polymer average molecular weights, repeat units, and end groups. One of the key issues in traditional MALDI sample preparation is making good solutions of the analyte and the matrix. Solvent-free sample preparation methods have been developed to address these issues. Previous results of solvent-free or dry prepared samples show some advantages over traditional wet sample preparation methods. Although the results of the published solvent-free sample preparation methods produced excellent mass spectra, we found the method to be very time-consuming, with significant tool cleaning, which presents a significant possibility of cross contamination. To address these issues, we developed an extension of the solvent-free method that replaces the mortar and pestle grinding with ball milling the sample in a glass vial with two small steel balls. This new method generates mass spectra with equal quality of the previous methods, but has significant advantages in productivity, eliminates cross contamination, and is applicable to liquid and soft or waxy analytes.     

基质辅助激光解析电离飞行时间质谱分析合成聚合物样品制备的研究进展

基质辅助激光解析电离飞行时间质谱（MALDI-TOF-MS）在合成聚合物的表征手段中具有不可替代的优点,可以提供聚合物的质量分布、嵌段长度、端基等信息.但由于合成聚合物的离子化效率通常不佳,因此样品制备是分析成功的关键.从基质、基质添加剂以及混样方式3个方面综述了MALDI-TOF质谱分析合成聚合物样品制备的研究进展.     

Mass spectrometry in the characterization of ambers. II. Free succinic acid in fossil resins of different origin

Baltic amber contains high levels of succinic acid, most of which is part of the polymer framework, and only recently has the presence of microcrystals of free succinic acid been documented by scanning electron microscopy and X‐ray diffraction analysis. The determination of succinic acid can be used for an easy identification of Baltic amber among other fossil resins and to distinguish it from imitations, widely diffused on the market, produced with natural or modified recent or sub‐fossil resins, such as copals. We report here a simple method, based on negative ion electrospray ionization mass spectrometry, for evaluating the free succinic acid content in water/methanol extracts of ambers from different origin, using a sample of about 20 mg. The limit of quantification is better than 1 ppm and, when applied to a set of amber samples of different origin, it was able to distinguish those of Baltic origin (showing free succinic acid levels in the range 50–400 ppm) from the others (for which succinic acid was undetectable, i.e. at levels lower than 1 ppm). Copyright © 2009 John Wiley & Sons, Ltd.     

Applications of diamond crystal ATR FTIR spectroscopy to the characterization of ambers

Diamond crystal ATR FTIR spectroscopy is a rapid technique with virtually no sample preparation which requires small sample amounts and showed potential in the study of ambers. FTIR spectra of ambers present discriminating patterns and can be used to distinguish amber from immature resins as copal, to determine local or Baltic origin of archaeological ambers and to detect most of the falsifications encountered in the amber commercialisation.     

Dehydrochlorination of Poly vinyl chloride Catalyzed by Quarternary Ammonium Salts in Solid Phase

The development of conducting polymers has been an active subject in the world since the late in 1970's. The preparation of polyaeetylene-like polymers by dehydroehlorination of polyvinylchloride (PVC) is a very economical and useful procedure and,hence, a focus of enormous interest of both theoretieians and experimentalists. In recent years, many methods for dehydrochlorination of PVC in solution have been studied widely and many kinds of catalytic mechanisms have been suggested.     

新型样品前处理材料在环境污染物分析检测中的研究进展

针对复杂样品的分析和痕量目标物的检测,样品前处理是必不可少的,高效的样品前处理技术不仅可以去除或减小样品基质干扰而且能够实现分析物的富集,提高分析检测的准确性和灵敏度。近年来,固相萃取、磁分散固相萃取、枪头固相萃取、搅拌棒萃取、固相微萃取等高效的样品前处理技术已在环境污染物分析检测中获得广泛关注,萃取效率主要取决于萃取材料,所以新型的高效萃取材料一直是样品前处理研究领域的重要发展方向。该文总结和讨论了近年来新型样品前处理材料在环境污染物分析检测中的研究进展,主要聚焦在石墨烯、氧化石墨烯、碳纳米管、无机气凝胶、有机气凝胶、三嗪基功能材料、三嗪基聚合物、分子印迹聚合物、共价有机框架材料、金属有机框架材料以及它们的功能化萃取材料等。这些材料已经被应用于环境样品中不同类别污染物的萃取富集,如重金属离子、多环芳烃、塑化剂、烷烃、苯酚、氯酚、氯苯、多溴联苯醚、全氟磺酸、全氟羧酸、雌激素、药物残留、农药残留等。这些样品前处理材料具有高的表面积、大量的吸附位点,并涉及多种萃取机理如π-π、静电、疏水、亲水、氢键、卤键等相互作用。基于这些萃取材料的多种样品前处理技术与各类检测方法如色谱、质谱、原子吸收光谱、荧光光谱、离子迁移谱等相结合,已广泛应用于环境污染物的高灵敏分析检测。最后,该文总结了样品前处理发展中存在的问题,并展望了其未来在环境分析中的发展趋势。     

Chemical and structural characterisation of DGEBA-based epoxies by time of flight secondary ion mass spectrometry (ToF-SIMS) as a preliminary to polymer interphase characterisation

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) has become a powerful tool in the field of surface analysis since it provides information about the top few monolayers of a sample, i.e. on the chemical composition of the sample surface. Thus, the general question arises whether a surface-sensitive technique like ToF-SIMS would be appropriate to detect systematic chemical and/or structural changes in organic bulk polymers caused by varying a chemical content of the initial components or by tracking, e.g. curing processes in such materials. It is shown that careful sample preparation and the use of multivariate methods permit the quantitative acquisition of chemical and structural information about bulk polymers from the secondary ion signals. The hardener concentration and a cross-linking coefficient in diglycidyl ether of bisphenol A based epoxies were determined by ToF-SIMS measurements on samples with different resin to hardener ratio and varying curing time. In future work, we will use the developed method to investigate the local composition of adhesively bonded joints. In particular, the mapping of the chemical and structural properties in the so-called interphase will then be of interest.     

Mass spectrometry in the characterization of ambers. I. Studies of amber samples of different origin and ages by laser desorption ionization, atmospheric pressure chemical ionization and atmospheric pressure photoionization mass spectrometry

Amber is a fossil resin constituted of organic polymers derived through complex maturation processes of the original plant resin. A classification of eight samples of amber of different geological age (Miocene to Triassic) and geographical origin is here proposed using direct mass spectrometric techniques, i.e. laser desorption ionization (LDI), atmospheric pressure chemical ionization (APCI) and atmospheric pressure photoionization (APPI), in order to obtain a fingerprint related to the amber origin. Differences and similarities were detected among the spectra with the four methods, showing quite complex spectra, full of ionic species in the mass range investigated (up to m/z 2000). The evaluation required statistical analysis involving multivariate techniques. Cluster analysis or principal component analysis (PCA) generally did not show a clear clustering with respect to the age of samples, except for the APPI method, which allowed a satisfying clustering. Using the total ion current (TIC) obtained by the different analytical approaches on equal quantities of the different amber samples and plotted against the age, the only significant correlation appeared to be that involving APPI. To validate the method, four amber samples from Cretaceous of Spain were analyzed. Also in this case a significant correlation with age was found only with APPI data. PCA obtained with TIC values from all the MS methods showed a fair grouping of samples, according to their age. Three main clusters could be detected, belonging to younger, intermediate and older fossil resins, respectively. This MS analysis on crude amber, either solid or extract, followed by appropriate multivariate statistical evaluation, can provide useful information on amber age. The best results are those obtained by APPI, indicating that the quantity of amber soluble components that can be photoionized decreases with increasing age, in agreement with the formation of highly stable, insoluble polymers.     

微孔有机聚合物在样品前处理技术中应用的研究进展

微孔有机聚合物（microporous organic polymers,MOPs）是一类由轻元素组成的新型多孔材料,具有骨架密度低、比表面积大、孔尺寸可调控、表面可修饰、化学和物理性质稳定等优点。近年来,MOPs在样品前处理领域展现出巨大的应用潜力。本文综述了MOPs的结构类型及合成方法,以及MOPs在固相萃取、批处理吸附萃取、整体柱和传感膜等样品前处理技术中的应用。     

分子印迹聚合物模拟酶催化剂的设计合成

分子印迹法是制备对特定分子具有选择性识别能力的聚合物的新兴技术,它的应用研究领域之一是作为模拟酶催化剂。本文综述了自1989年首次报道成功制备MIPs(Molecular Impfinting Polymers)催化剂以来,制备MIPs催化剂的几种主要方法：印迹过渡态类似物(Translate State Analogue,TSA),印迹底物或其类似物,运用预组织法制备MIPs催化剂。最后,指出了目前存在的问题以及未来的发展方向。     

Recent applications of sample preparation techniques in food analysis

Even with the emergence of advanced techniques of separation and identification, it is rarely possible to analyse food without manipulation. The traditional techniques for sample preparation are time consuming and require large amount of reagents, which are expensive, generate considerable waste, contaminate the sample and can enrich it for analytes. The more analytical techniques have become highly developed, the more has sample clean-up become important in order to fully take advantage of them. Due to the multiplicity of food matrices, it is not possible to use one sample preparation technique, so many methods have been proposed for meeting all the requirements. The newest variations of wet digestion, solvent and sorbent extraction and membrane separation are summarised and their most recent applications to food analysis are provided.     

Determination of metals in biofluids and tissues: sample preparation methods for atomic spectroscopic techniques

Several sample preparation methods unique to each instrumental technique exist for the elemental analysis of biological specimens, but no review or book has dealt with them. The present review is an attempt to fill this void and focuses on sample preparation methods unique to atomic and X-ray spectroscopic techniques. The techniques covered are: flame and electrothermal AAS, inductively coupled plasma atomic emission spectrometry (ICP-AES), inductively coupled plasma mass spectrometry (ICP-MS) and X-ray fluorescence spectrometry (XRF) since these are most commonly used in trace element analysis of biological materials. The intent is not to present the procedural details for the various tissues or elements, but rather to highlight the methods which are unique to each instrument. The bibliography accompanying this review should aid the analytical chemist in his/her search for the detailed preparation protocols.     

A review of sample preparation methods for the pesticide residue analysis in foods

The pesticide residues in foods have received increasing attention as one of the most important food safety issues. Therefore, more strict regulations on the maximum residue limits (MRLs) for pesticides in foods have been established in many countries and health organizations, based on the sensitive and reliable analysis methods of pesticide residues. However, the analysis of pesticide residues is a continuing challenge mainly because of the small quantities of analytes as well as the large amounts of interfering substances which can be co-extracted with them, often leading to experimental errors and damage to the analytical instruments. Thus, extensive sample preparation is often required for the pesticide residue analysis for the effective extraction of the analytes and removal of the interferences. This paper focuses on reviewing the recent development in the sample preparation methods for the pesticide residue analysis in foods since 2006. The methods include: liquid-liquid extraction (LLE), supercritical-fluid extraction (SFE), pressurized-liquid extraction (PLE), microwave-assisted extraction (MAE), ultrasound-assisted extraction (UAE), gel permeation chromatography (GPC), solid-phase extraction (SPE), molecularly imprinted polymers (MIPs), matrix solid-phase dispersion (MSPD), solid-phase micro-extraction (SPME), QuEChERS, cloud point extraction (CPE) and liquid phase micro-extraction (LPME), etc. Particularly their advantages, disadvantages and future perspectives will be discussed.     

Modern Sample Preparation Methods in Chemical Analysis

 The choice of the sample preparation method is crucial in chemical analysis, since it is often the most critical and time-consuming step of an analytical process. Some of the older methods are laborious, expensive, and offer no scope for automation. The newer sample preparation techniques can give higher yields, better sample clean-up, cost effectiveness worker safety and environmental protection. Some novel sample preparation methods are described their potential is illustrated with emphasis on bioanalytical applications.     

Fast analysis of high-energy compounds and agricultural chemicals in water with desorption electrospray ionization mass spectrometry

Novel sampling and detection methods using desorption electrospray ionization (DESI) are examined in the detection of explosives (RDX, TNT, HMX, and TNB) and agricultural chemicals (atrazine, alachlor and acetochlor) from aqueous matrices and authentic contaminated groundwater samples. DESI allows analysis of solid and liquid compounds directly from surfaces of interest with little or no sample preparation. Significant savings in analysis time and sample preparation are realized. The methods investigated here include (i) immediate analysis of filter paper wetted with contaminated water samples without further sample preparation, (ii) rapid liquid-liquid extraction (LLE), and (iii) analyte extraction from contaminated groundwater samples on-site using solid-phase extraction (SPE) membranes, followed by direct DESI analysis of the membrane. The wetted filter paper experiment demonstrates the maximum sample throughput for DESI analysis of aqueous matrices but has inadequate sensitivity for some of these analytes. Both the LLE and the SPE methods have adequate sensitivity. The resulting SPE membranes and/or small volume solvent extracts produced in these experiments are readily transported to off-site facilities for direct analysis by DESI. This realizes a significant reduction in the costs of sample shipping compared with those for typical liter-sized samples of groundwater. Total analysis times for these preliminary DESI analyses are comparable with or shorter than those for GC/MS and limits of detection approach environmental action levels for these compounds while maintaining a modest relative standard deviation. Tandem mass spectrometric data is used to provide additional specificity as needed.     

Using MESIMS to analyze polymer MALDI matrix solubility

The development of reliable sample preparation methods has been critical to the success of matrix-assisted laser desorption/ionization (MALDI) mass spectrometry experiments. Good MALDI sample preparation for polymers involves choosing the solvent system, the matrix, and the ionization agent correctly, and combining them in a manner that will lead to a sample that will produce the desired ions. The vast diversity of chemistry available in industrial polymers has challenged our ability to design reliable sample preparation methods. In the experiments reported here, we show that matrix-enhanced secondary ion mass spectrometry (MESIMS) is an effective analytical technique to explore sample segregation in solid phase MALDI samples. Qualitative comparison of MESIMS and MALDI results for polymer samples prepared with multiple matrices aids our investigation of the solid-phase solubility of a variety of low molecular weight polymer materials. Including the solid-phase solubility with the liquid-phase solubility of the polymer samples and the matrices enables the construction of a relative solubility chart, which shows the best solubility matches between the polymer and matrix materials for MALDI experiments.     

色谱固定相的超支化和聚酰胺-胺树状大分子接枝修饰方法研究进展

随着色谱固定相制备技术深入发展,固定相填料的修饰方法日渐成熟,主要包括固定相表面直接化学反应、表面附聚、共价接枝和超支化修饰。其中,以缩聚反应为主的超支化修饰方法自提出以来备受研究者的青睐,已经被应用于多种阴离子交换色谱固定相填料的制备。近些年来,和超支化聚合物具有相似结构的树状大分子由于其独特的物理性能、完美的树状结构和大量活性官能团,也逐渐被应用于各种色谱固定相填料的修饰,并有望进一步完善固定相填料的结构和分离性能。该文主要总结了超支化修饰方法和以聚酰胺-胺为主的树状大分子接枝修饰方法在色谱固定相填料制备中的应用,并对其未来发展进行展望。     

Evaluation of a new multiple-layer spotting technique for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry of synthetic polymers

A new multiple-layer matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) sample-spotting technique is described. This fast and easy technique was evaluated with poly(ethylene glycol) (PEG) standards and optimized conditions for these synthetic polymers were obtained. PEGs up to 35 kDa were detectable with this approach and single monomer resolution was observed up to 20 kDa. The spotting was performed using a multiple-layer approach, which offers the capability of complex sample preparation without the requirement of premixing the different matrix, analyte and doping salt solutions. The technique reduces the time required for sample preparation and offers high flexibility with respect to sample composition and solvents utilized for the crystallization of the compounds. The technique is thus perfectly suited for applications in combinatorial material research.