导电聚合物自组装纳米器件

导电聚合物自20世纪70年代以来得到了广泛的研究.然而,关于聚合物纳米器件的研究则鲜有报导.从纳米尺度上研究导电聚合物,不仅有利于从更小的尺度上解析聚合物的光电性能、电荷传输机理,也可以将导电聚合物和纳米电子学有机地结合起来,发展聚合物纳米电子学的研究.文章介绍了最近由胡文平等［1,2］采用自组装的方法构筑的聚合物纳米器件和在纳米器件中观察到的一些有趣的现象.     

导电聚合物微米/纳米结构的制备和性质

文章综述了导电聚合物微米／纳米结构(微米管、纳米管、纳米线和微米球等)近几年来所取得的研究进展．重点介绍了三种制备方法(模板合成、无模板法、电纺丝技术)和导电聚合物微米／纳米管的电学、力学、热学、磁学等性能．     

A novel fabrication method of CNT‐CP composite single nanowires self‐templated by dielectrophoresis and electropolymerization

A new method for fabricating carbon nanotube‐conducting polymer (CNT‐CP) composite single nanowires is reported. The method developed is highly efficient, reliable, and economical because it obviates the time consuming process of template fabrication and the post‐synthesis task of positioning nanowires. Single nanowires with diameters of 50‐500 nm are fabricated between electrodes, self‐templated by dielectrophoresis and electropolymerization. Fabrication of an individually addressed nanowire array with cantilever electrodes on a microchip is demonstrated.

     

Photoluminescence and optical absorption properties of polymer modified carbon nanotubes

Polymethyl methacrylate modified carbon nanotubes were prepared using γ radiation, and the modified carbon nanotubes exhibited strong luminescence (∼ ∼568 nm) at room temperature and an absorption peak at ∼ ∼247 nm can be observed in the polymer modified samples.     

Composites of multiwall carbon nanotubes and conducting polyaniline: Bulk samples and films produced from a solution in chloroform

Multiwall carbon nanotubes and conducting polyaniline, doped with dodecylbenzenesulfonic acid, are blended by employing the solubility of both materials in chloroform. Pellets are made by pressing the dried powder of the obtained composite, and films by sedimentary deposition onto a plastic substrate. In these composites, the advantageous properties of carbon nanotubes can be utilized in fully conducting bulk and planar structures while the strong decrease of the conductivity of doped polyaniline at low temperatures is simultaneously suppressed. The nanotube content in pellets can be as high as 40% by weight, and this wide range leads to a control over the shape and magnitude of the conductivity versus temperature curves. As the nanotube content grows, the temperature dependence of the conductivity becomes less steep, which is similar to the effect of annealing temperature on the conductivity of certain polycrystalline graphene films. In our case, this change is most likely caused by the increase of the density of highly conducting channels and not by homogeneous delocalization effects.     

碳纳米管内Ni纳米线的螺旋度与热稳定性研究

本文采用分子动力学模拟方法研究了扶手型碳纳米管包裹Ni纳米线的复合结构, 主要讨论内部Ni纳米线的螺旋度和热稳定性.结果表明, Ni纳米线为多壳层螺旋结构, 各壳层是由多条Ni原子链螺旋而成,不同层的螺旋度不同,内层的螺旋度明显大于外层. 当每层的Ni原子链条数为3的整数倍时,其螺旋度最大. Ni纳米线的螺旋度与碳纳米管的管径相关,各层螺旋度的大小随管径的增加有明显的周期性变化. 碳纳米管对Ni纳米线有很好的保护作用,即使是高温对Ni纳米线的结构及螺旋度也影响很小.     

Electron field emission properties of conducting polymer coated multi walled carbon nanotubes

The present work describes the field emission characteristics of conducting polymer coated multi walled carbon nanotubes (MWNTs) field emitters fabricated over flexible graphitized carbon cloth. Nanocomposites involving the combination of MWNTs and conducting polymers polyaniline (PANI) and polypyrrole (PPy) have been prepared by in-situ polymerization method and have been characterized using scanning electron microscopy and transmission electron microscopy. Using spin coating method, field emitters based on PANI/MWNTs and PPy/MWNTs over flexible graphitized carbon cloth have been prepared. The field emission characteristics have been studied using an indigenously fabricated set up in a vacuum chamber with a base pressure of 2 × 10⁻⁵ Pa and the results are discussed. Our results display that the field emission performance of the emitters depends strongly on the work function of the emitting material. Low turn on emission field of 2.12 V/μm at 10 μA/cm² and high emission current density of 1 mA/cm² at 3.04 V/μm have been observed for PANI/MWNTs field emitter.     

Preparation and luminescence study of Eu(III) titanate nanotubes and nanowires using carbon nanotubes as removable templates

Eu(III) titanate nanotubes and nanowires have been successfully synthesized by solvothermal method using carbon nanotubes (CNTs) as removable templates. The products were characterized by X-ray diffraction spectroscopy, transmission electron microscopy, energy-dispersive X-ray spectrometry, thermogravimetric and differential thermal analysis. It is demonstrated that CNTs are fully coated with an amorphous Eu₂(TiO₃)₃ layer, which is about 10 nm thick and almost continuous and uniform. After the Eu₂(TiO₃)₃/CNTs composites have been calcined at various temperatures, Eu₂(TiO₃)₃ nanotubes and nanowires are obtained by removing the CNTs templates. The diameter of the Eu₂(TiO₃)₃ nanotubes is 40–60 nm, which is consistent with that of CNTs. Both nanotubes and nanowires have a narrow distribution of diameters. The fluorescence properties of the Eu₂(TiO₃)₃ nanotubes and nanowires calcined at various temperatures have been investigated. The results indicate that when the Eu₂(TiO₃)₃/CNTs composites were calcined at 700 °C for 5 h, the Eu₂(TiO₃)₃ nanotubes obtained can be effectively excited by 395 nm light, and exhibit strong red emission around 616 nm. It is very interesting to discover that a few residual carbons doped in Eu₂(TiO₃)₃ nanotubes and many oxygen vacancies could promote the intensity of red emission peak of Eu³⁺ ions. In addition, Eu₂(TiO₃)₃ nanowires calcined at 900 °C for 5 h also have a strong red emission peak due to many oxygen vacancies and defects formed on the surface of the nanowires and inside them.     

Current-voltage characterization of Au contact on sol-gel ZnO films with and without conducting polymer

This study investigates the current density-voltage (J-V) characteristics of Au/n-type ZnO and Au/polyaniline (PANI)/n-type ZnO devices. ZnO films were prepared by the sol-gel method. For Au/n-type ZnO devices, native defects and impurities resident within the ZnO depletion region contribute to barrier thinning of, carrier hopping across, and tunneling through the Schottky barrier. This leads to the formation of nonalloyed ohmic contacts. However, rectifying junctions were formed on n-type ZnO by employing the simple technique of spin-coating PANI to act as the electron-blocking layer. Our present results suggest that the ZnO depletion region at the PANI/n-type ZnO interface is not the origin of the rectifying behavior of Au/PANI/n-type ZnO contact. In addition, the presence of the built-in potential of Au/PANI/n-type ZnO devices could result in the shift of the J-V curve toward negative voltage. Excellent agreement between simulated and measured data was obtained when the built-in potential was taken into account in the J-V relationship.     

Rectifying effect of heterojunctions between metals and doped conducting polymer nanostructure pellets

This paper reports that the Schottky junctions between low work function metals （e.g. Al and In） and doped semiconducting polymer pellets （e.g. polyaniline （PANI） microsphere pellet and polypyrrole （PPy） nanotube pellet） have been prepared and studied. Since Ag is a high work function metal which can make an ohmic contact with polymer, silver paste was used to fabricate the electrodes. The Al/PANI/Ag heterojunction shows an obvious rectifying effect as shown in I - V characteristic curves （rectifying ratio γ = 5 at ±6 V bias at room temperature）. As compared to the Al/PANI/Ag, the heterojunction between In and PANI （In/PANI/Ag） exhibits a lower rectifying ratio γ= 1.6 at ±2 V bias at room temperature. In addition, rectifying effect was also observed in the heterojunctions Al/PPy/Ag （γ = 3.2 at ±1.6 V bias） and In/PPy/Ag （γ = 1.2 at ±3.0 V bias）. The results were discussed in terms of thermoionic emission theory.     

Electrical conductivity of individual polypyrrole microtube

Conducting microtubes (0.4－0.5μm in outer diameter) made of polypyrrole (PPy) doped with p-toluene sulfonic acid (PTSA) were synthesized by a self-assembly method. We report the electrical conductivity of an individual PPy microtube, on which a pair of platinum micro-leads was fabricated by focused ion beam deposition. The measured room-temperature conductivity of the individual PPy microtube was 0.29S/cm, which is comparable to that of template-synthesized PPy micro/nanotubes. The temperature dependence of conductivity of the individual microtube follows the three-dimensional variable-range hopping (3D VRH) model.     

Structure of Lennard–Jones nanowires encapsulated by carbon nanotubes

Molecular dynamics simulations have been performed to investigate the structures of Lennard–Jones(LJ) nanowires(NWs) encapsulated in carbon nanotubes(CNTs). We find that the structures of NWs in a small CNT only adopt multi-shell motifs, while the structures of NWs in a larger CNT tend to adopt various motifs. Among these structures, three of them have not been reported previously. The phase boundaries among these structures are obtained regarding filling fractions, as well as the interaction between NWs and CNTs.     

Selective growth of individual multiwalled carbon nanotubes

Growth of individual, vertically aligned multiwalled carbon nanotubes (VACNT) on patterned Si wafers using dc plasma-enhanced CVD is described. The selective growth of individual VACNT within larger holes etched in Si is demonstrated for the first time.     

Electrochemical synthesis and characterization of a new conducting polymer: Polyrhodanine

An antimicrobial drug, rhodanine (Rh), was electrochemically polymerized on a Pt electrode using cyclic voltammetry (CV). The high quality and homogeneous polyrhodanine (pRh) films with a dark-purple color were obtained. The chemical structure characterization was investigated by Fourier transform infrared spectroscopy (FTIR) and UV-vis spectroscopy techniques. Further, thermogravimetric analysis (TGA) and differential thermal analysis (DTA) techniques used to investigate thermal properties of the film. It is found that thermal stability of pRh films is relatively high. It is also observed that tetrahydrofurane (THF) and N-methyl-2-pyrrolidone (NMP) are good solvents for the polymer.     

Statistical considerations from quantized electron conductance in nanowires and nanotubes

The transmission probability associated with the expression which gives the properly fractional quantized electron conductance through some nanowires is interpreted as corresponding to a discrete random variable represented by the involved quantum number. Our considerations are common to both carbon nanotubes and metallic nanowires.     

The intrinsic lifetime of low-frequency zone-centre phonon modes in silicon nanowires and carbon nanotubes

Estimates of the intrinsic lifetime of low-frequency zone-centre phonon modes in silicon nanowires and carbon nanotubes have been presented from the application of Fermi’s golden rule formula based upon an elastic continuum model for cubic anharmonicity. In particular, results have been presented for the lowest non-zero mode in both nanostructures, and also the breathing mode in the nanotube. Except for the ultrathin nanowire, the lifetime increases with size and decreases with an increase in temperature. Typically, these modes have a lifetime of the order of nanoseconds, almost a thousand times larger than the lifetimes of optical phonon modes in the corresponding bulk materials. Also, at room temperature the lifetime of the lowest non-zero mode is nearly an order of magnitude larger in the (20,20) nanotube than in the nanowire of similar thickness (width 2.2 nm).     

Conducting polymer based hybrid structure as transparent and flexible field electron emitter

An efficient cathode material with high transparency (93%) based on conducting polymer poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) and single wall carbon nanotubes (SWCNTs) has been developed for the fabrication of highly transparent and flexible field electron emitters (FEE). This kind of material showed superior field emission (FE) performance with very high current density (10^–3A/cm²) at very low electric field. The FE performance of the hybrid materials was dramatically improved compared to either SWCNTs and PEDOT:PSS. Thus the hybrid structures of conducting polymer and SWCNTs might be a good choice for use as a cathode material to enhance the FE performance and for potential application in future portable displays. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Electronic and magnetic properties of single-wall GeC nanotubes filled with iron nanowires

Under GGA, the structural, electronic and magnetic properties of single-wall (8, 8) GeC nanotubes filled with iron Fe_n nanowires (n = 5, 9, 13 and 21) have been investigated systematically using the first-principles PAW potential within DFT. We find that the initial shapes of the Fe₅@(8, 8), Fe₉@(8, 8) and Fe₁₃@(8, 8) systems are preserved without any visible changes after optimization. But for the Fe₂₁@(8, 8) system, the initial shapes are distorted largely for both nanowire and nanotube. The binding processes of Fe_n@(8, 8) systems are exothermic, and Fe₅@(8, 8) system is the most stable structure. The pristine (8, 8) GeCNT is nonmagnetic and direct semiconductor with a wide band gap of about 2.65 eV. Projected densities of states onto different shell Fe atoms show that the separation between the bonding and antibonding d states is reduced as going from the core Fe atom to the outermost shell Fe atom. The spin polarization of the Fe_n@(8, 8) systems and free-standing nanowires are higher than that in bulk Fe. And the spin polarization generally decreases with the number n of the Fe atoms increasing for both the Fe_n@(8, 8) systems and free-standing nanowires. Both the largest spin polarization value itself and not more decrease with respect to value of free-standing Fe₅ nanowire suggest the Fe₅@(8, 8) system could be of interest for the use in electron spin injection. The magnetism is mainly confined within the inner Fe nanowire for these combined systems. More importantly, the Fe₅ nanowire encapsulated inside (8, 8) GeCNT is under the protection of the GeCNT to prevent from oxidation, thus may stably exist in atmosphere for long time and can be expected to have potential applications in building nanodevices.     

Tunneling-current-induced light emission from individual carbon nanotubes

Tunneling electrons from a scanning tunneling microscope were used to excite light emission from individual multiwalled carbon nanotubes adsorbed on a highly ordered pyrolytic graphite surface. In the integral photon-intensity map, spatially uniform emission in the visible region was observed along the identical multiwalled carbon nanotubes. The emission spectra for the individual nanotubes showed unique profiles which differed with each nanotube, and were classified into two types. Our results indicate that the light emission is due to not the localized electronic states at the tube ends or defects but radiative transitions of electrons between the one-dimensional van Hove singularities, indicating that the two types of spectra are attributed to metallic and semiconducting nanotubes.     

Scattering characteristics of conducting cylinder coated with nonuniform magnetized ferrite

An analytical technique, referred to as the scattering matrix method （SMM）, is developed to analyse the scattering of a planar wave from a conductolution for the nonuniform fering cylinder coated with nonuniform magnetized ferrite. The SMM srite coating can be reduced to the expressions for the scattering and penetrated coefficients in four particular cases： nonuniform magnetized ferrite cylinder, uniform magnetized ferrite-coated conducting cylinder, uniform ferrite cylinder as well as homogeneous dielectric-coated conducting cylinder. The resonant condition for the nonuniform ferrite coating is obtained. The distinctive differences in scattering between the nonuniform ferrite coating and the nonuniform dielectric coating are demonstrated. The effects of applied magnetic fields and wave frequencies on the scattering characteristics for two types of the linear profiles are revealed.