Template ordered open-grid arrays of paired endohedral fullerenes

Developing useful molecular systems, such as planar networks for novel molecular electronics, requires the ability to control the way molecules assemble at surfaces. Here we report how an oxide crystal surface can be used as a template to controllably order endohedral fullerenes, Er3N@C80, into two-dimensional (2D) open-grid arrays. The crystal surface is made of highly ordered oxide nanostructures which self-assemble on the surface of SrTiO3(001). This method of molecular ordering can be applied to other fullerenes and has the potential to provide a basis for developing a wide range of molecular architectures.     

Electron impact ionization and dissociation of neutral and charged fullerenes

Three different types of electron impact ionization experiments have been performed, involving neutral and charged C₆₀ and C₇₀. 1) We have determined absolute partial ionization cross sections for formation of parent ions C ₆₀ ^z+ and C ₇₀ ^z+ in charge states up to z = 4, and of singly and multiply charged fragments of size n ≥ 44 and n ≥ 50 from C₆₀ and C₇₀ neutral precursors, respectively. 2) Previous appearance energy measurements of C₇₀ have been improved and extended to z = 5; ionization energies are found to depend linearly on the charge state of the precursor, in agreement with theoretical predictions. 3) A beam of mass selected C ₆₀ ²⁺ has been crossed with an intense electron beam; the induced reactions (fragmentation, post- ionization, and dissociative post-ionization) have been analyzed.     

The preparation of a highly ordered long-range lamellar silica structure with large interlayer spacings

Highly ordered long-range lamellar silicas have been prepared using silicone surfactant as a template; the lamellar silicas have the largest lattice constant to date reported; the results show that silicone surfactants with flexible siloxane chains favor the formation of these unusual lamellar structures.     

Synthesis of hydrothermally stable and long-range ordered Ce-MCM-48 and Fe-MCM-48 materials

The hydrothermally stable and long-range ordered Ce-MCM-48 and Fe-MCM-48 were conveniently synthesized at 393 K for 24 h by directly adding fluoride ions to the initial gel without posttreatment and pH adjustment. The Ce-MCM-48 with a Si/Ce of 200 and 100, which were prepared by directly adding fluoride ions, could still maintain their mesoporous structures after refluxing in boiling water for 3 days. The incorporation of Ce into MCM-48 could enhance the hydrothermal stability of MCM-48 in the absence of fluoride ions; however, the incorporation of Fe into MCM-48 materials barely improved the hydrothermal stability of MCM-48 materials. The effect of adding NaF was much more efficient in enhancement of hydrothermal stability than that of the incorporation of Ce. The addition of fluoride ions mainly improves the degree of polymerization of silicates. The Ce(4+) ions in Ce-MCM-48 appear to be present partly in tetrahedral coordination in the framework and partly as CeO(2) particles on the surface of framework. The Ce positioned on the surface of pore walls and in the framework both provide the protection against water attack.     

Electron attachment to higher fullerenes and to Sc3N@C80

We report on attachment of free electrons to fullerenes C(n) (n = 60, 70, 76, 78, 80, 82, 84, 86) and to Sc(3)N@C(80). The attachment cross sections exhibit a strong resonance at 0 eV for all species. The overall shape of the anion yield versus electron energy is quite similar for the higher fullerenes, with a minimum around 1 eV and a maximum which gradually shifts from 6 eV for C(60) to approximately 4 eV for large n. The endohedral Sc(3)N@C(80) exhibits a particularly shallow minimum and a maximum below 4 eV. We model autoionization of the anions with due consideration of the internal energy distributions. The relatively low electron affinity of Sc(3)N@C(80) is reflected in its reduced ion yield at higher attachment energies.     

Electron spin polarization of functionalized fullerenes. Reversed quartet mechanism

Time-resolved electron paramagnetic resonance (TREPR) spectroscopy was used to study two functionalized fullerenes consisting of a C60 moiety covalently linked to TEMPO radical via spacers of different length. Photoinduced electron spin polarization (ESP) reflecting a non-Boltzmann population within the energy levels of the spin system was observed in the electronic ground and excited states. Both fullerenes are characterized by a sign inversion of their TREPR spectra. A new mechanism of ESP generation was suggested to explain the experimental results. This mechanism, termed as the reversed quartet mechanism (RQM), includes the intersystem crossing process, which generates ESP in the excited trip-doublet and trip-quartet (2T1 and 4T1) states. This ISC is accompanied by ESP transfer to the ground state (2S0) by either electron-transfer reaction (in our case via charge transfer state, 2CT, i.e., 2T1--> 2CT --> 2S0 or internal conversion, 2T1--> 2S0.     

Nanoscale ordered structure of fullerenes on the surface of highly oriented pyrolytic graphite

The formation of an ordered arrangement of C₆₀ molecules as path-like structures on the surface of highly oriented pyrolytic graphite (HOPG) is reported for the first time with theoretical implementations. Fullerene nucleation and deposition from solutions with different concentrations of C₆₀ is performed under ambient conditions without electrochemical processes. Scanning tunneling microscopy (STM) is used to study the surface topography. The results reveal new aspects of fullerene deposition that can potentially aid in modeling with theoretical simulations.     

Boojum and stripe textures in long-range orientationally ordered monolayers on solid substrates

Long-range organization of molecular tilt azimuth is a striking feature in monolayers at the air-water interface. We show that the boojum and stripe textures of pentadecanoic acid (PDA) with the continuous variations of molecular tilt azimuth formed at the air-water interface at temperatures lower than room temperature can be preserved after being transferred to glass substrates at low dipping speeds. The long-range tilt order in the transferred boojums and stripes is resolved by frictional force microscopy at room temperature, suggesting that the tilt order is "frozen" through the interaction of PDA molecules with the glass surface. The transferred stripe structure can be used as a unique alignment layer to induce a continuously azimuthal orientation of nematic liquid crystals.     

Direct electrochemistry and enzymatic activity of hemoglobin immobilized in ordered mesoporous titanium oxide matrix

The novel highly ordered mesoporous titanium oxide (mesoTiO₂) materials, prepared by the “acid–base pairs” route, were firstly used for the immobilization of hemoglobin (Hb) and its bioelectrochemical properties were studied. FTIR and UV–vis spectroscopy demonstrated that Hb in the mesoTiO₂ matrix could retain its native secondary structure. The CV results of Hb/mesoTiO₂-modified electrode showed a pair of well-defined and quasi-reversible redox peaks centered at approximate −0.158 V (vs. SCE) in pH 6.0 phosphate buffer solution. It reflects the characteristic of Hb heme Fe (III)/Fe(II) redox couple with fast heterogeneous electron transfer rate. The immobilized Hb also displayed its good electrocatalytic activity for the reduction of hydrogen peroxide. The results demonstrate that the mesoTiO₂ matrix may improve the protein loading with the retention of bioactivity and greatly promote the direct electron transfer, which can be attributed to its high specific surface area, uniform three-dimensional well-ordered porous structure, suitable pore size and biocompatibility.     

Adsorption and dynamics of long-range interacting fullerenes in a flexible, two-dimensional, nanoporous porphyrin network.

Herein, a detailed investigation of the adsorption and dynamics of C60 and C70 fullerenes hosted in a self-assembled, two-dimensional, nanoporous porphyrin network on a solid Ag surface is presented. Time-resolved scanning tunneling microscopy (STM) studies of these supramolecular systems at the molecular scale reveal distinct host-guest interactions giving rise to a pronounced dissimilar mobility of the two fullerenes within the porphyrin network. Furthermore, long-range coverage-dependent interactions between the all-carbon guests, which clearly affect their mobility and are likely mediated by a complex mechanism involving the Ag substrate and the flexible porphyrin host network, are observed. At increased fullerene coverage, this unprecedented interplay results in the formation of large fullerene chains and islands. By applying a lattice gas model with nearest-neighbor interactions and by evaluating the fullerene-pair distribution functions, the respective coverage-dependent guest-guest interaction energies are estimated.     

The long-range transport of organic pollutants to the Arctic

Summary The concentrations of organic polychlorinated compounds, fluoranthene and some quinones have been determined in Arctic air during meteorological situations typical for the summer and winter season. The organic pollutants in 600–900 m³ of air were collected on polyurethane foam and quantified by negative ion chemical ionization mass spectrometry. The results presented are a strong proof for the occurrence of long-range transport of organic pollutants to the Arctic.

---

Ferntransport von organischen Verunreinigungen zur Arktik

Zusammenfassung Die Konzentrationen an organischen polychlorierten Verbindungen, Fluoranthen und einigen Chinonen wurden in arktischer Luft unter meteorologischen Bedingungen gemessen, die für Sommer und Winter typisch sind. Die Verunreinigungen aus 600–900 m³ Luft wurden auf Polyurethanschaum gesammelt und mit Hilfe der chemischen Ionisierungs-Massenspektrometrie mit negativen Ionen analysiert. Die erhaltenen Ergebnisse beweisen den Ferntransport von Verunreinigungen in die Arktis.

     

Preparation of long-range ordered nanostructures in semicrystalline diblock copolymer thin films using micromolding

Long-range ordered nanostructures are prepared in the poly(styrene)-block-poly(ε-caprolactone) diblock copolymer thin films using micromolding. We evaluated the change in crystallinity based on grazing-incidence X-ray diffraction and proved that the crystallinity increased with the decrease of the mold size. This means that ordered nanostructures with atomic length scale order can be adjusted by tuning the mesoscale confinement. The inherent mechanism was the cooperation of geometric confinement, microphase structure and surface-induced ordering of PS-b-PCL in the melt, which paved the way for the subsequent crystal growth. These findings establish a route to promote the cost-effective nanofabrication by combining the mature microfabrication technique with the emerging directed self-assembly of block copolymers.     

Electron transport and excitations in graphene

Graphene is a two-dimensional, single atomic layer carbon structure with many unique physical and chemical properties. In this article, I will focus on electron transport through graphene, both incoherent and coherent, the control of the current through external electric fields, and the realization of high frequency transistors based on graphene. I will also discuss briefly graphene.’s optical properties and how they can be used to create wide wavelength range, ultra-fast photodetectors. Finally, I will present results on the field-induced opening of a tunable band-gap in bi-layer graphene.     

Synthesis, photochemistry, and electrochemistry of single-wall carbon nanotubes with pendent pyridyl groups and of their metal complexes with zinc porphyrin. Comparison with pyridyl-bearing fullerenes

A soluble, functionalized Py-SWNT has been synthesized and characterized by solution (1)H and (13)C NMR, FT-Raman, and electron microscopy. Experimental data indicate that Py-SWNT has short tubes with pentyl esters at the tips and pyridyl isoxazolino units along the walls. The synthesis of Py-SWNT is based on a 1,3-dipolar cycloaddition of a nitrile oxide on the SWNT walls, similar to 1,3-dipolar cycloadditions that are common for fullerene functionalization. The resulting Py-SWNT forms a complex with a zinc porphyrin (ZnPor) in a way similar to that reported for pyridyl-functionalized [60]-fullerenes. Formation of this metal-ligand complex was firmly established by a detailed electrochemical study. However, in contrast to the behavior observed for the ZnPor/Py-C(60) complex, photochemical excitation of the complex between ZnPor/Py-SWNT does not lead to electron transfer with the generation of charge-separated states. Fluorescence and laser flash studies indicate that the main process is energy transfer from the singlet ZnPor excited state to the Py-SWNT with observation of emission from Py-SWNT. Triplet ZnPor excited-state quenching by Py-SWNT is only observed in polar solvents such as DMF, but not in benzonitrile.     

An azido-metal-isonicotinate complex showing long-range ordered ferromagnetic interaction: synthesis, structure and magnetic properties

A new 3D Cu(II) complex [Cu1.5(N3)2(isonicotinate)]n [1], which features two types of bridging modes for azide (mu(1,1) and the rare asymmetric mu(1,1,3)) where the three bonds of the mu(1,1,3)-N3(-) group to Cu exhibit three different distances, has been synthesized and characterized, and magnetic measurements indicate that [1] experiences long-range ferromagnetic ordering at approximately 6 K.     

Oxidation of fullerenes with ozone

Heterophase and liquid-phase oxidation reactions of fullerene with ozone and the data on chemiluminescence generated in these reactions were considered and classified for the first time.