Polyamidoamine‐grafted silica nanoparticles as pseudostationary phases for capillary electrochromatographic separation of proteins

Polyamidoamine‐grafted silica nanoparticles were synthesized, characterized and investigated for the feasibility as pseudostationary phases in alkaline buffer for separation of cationic and anionic proteins, viz., lysozyme, cytochrome C, gamma globulin, and myoglobin. Neither bare silica nanoparticles nor polyamidoamines nor their mixtures as pseudostationary phases could lead to simultaneous separation of the four proteins. However, polyamidoamine‐grafted silica nanoparticles not only suppressed the irreversible wall adsorption of the cationic lysozyme and cytochrome C, but also provided selectivity toward all the proteins. We found that polyamidoamine generation two‐modified silica nanoparticles were the optimum pseudostationary phases with respect to detection sensitivity and separation efficiency; presence of the nanoparticles at 0.01% in the running buffer of 12.5 mM tetraborate/phosphate at pH 9.1 resulted in baseline resolution of the four proteins.     

Separation of superparamagnetic magnetite nanoparticles by capillary zone electrophoresis using non‐complexing and complexing electrolyte anions and tetramethylammonium as dispersing additive

Separations of bare superparamagnetic magnetite nanoparticles (BSPMNPs, approx. 11 nm diameter) was performed using non‐complexing (nitrate) and complexing (chloride, citrate and phosphate) electrolyte ions with additions of tetramethylammonium hydroxide (TMAOH), which is commonly applied to control the synthesis of stable iron oxides. The use of TMAOH as a background electrolyte (BGE) additive for capillary electrophoresis (CE) separations provided for the first time electropherograms of BSPMNPs exhibiting symmetrical and highly reproducible peaks, free of spurious spikes characteristic of nanoparticle clusters. Consequently, accurate determination of the electrophoretic effective mobility of BSPMNPs was possible, yielding a value of −3.345E‐08 m² V⁻¹ s⁻¹ (relative standard deviation (RSD) of 0.500%). The obtained mobilities of BSPMNPs in the presence of various electrolyte ions show that the degree of complexation with the surface of BSPMNPs follows the order chloride < citrate < phosphate, correlating with the stabilities of Fe(III) complexes with the respective anions. Finally, bare and carboxylated iron oxide nanoparticles were successfully separated in only 10 min using 10 mM Tris‐nitrate containing 20 mM of TMAOH as electrolyte. Our findings show that simple and rapid CE experiments are an excellent tool to characterise and monitor properties and interactions of iron oxide nanoparticles with other molecules for surface modification purposes.     

Size and medium conductivity dependence on dielectrophoretic behaviors of gas core poly‐l‐lysine shell nanoparticles

Dynamic (dis)assembly of biocompatible nanoparticles into 3D, packed structures would benefit drug delivery, films, and diagnostics. Dielectrophoretic (DEP) microdevices can rapidly assemble and manipulate polarizable particles within nonuniform electric fields. DEP has primarily discerned micrometer particles since nanoparticles experience smaller forces. This work examines conductivity and size DEP dependencies of previously unexplored spherical core‐shell nanoparticle (CSnp) into 3D particle assemblies. Poly‐l ‐lysine shell material was custom synthesized around a gas core to form CSnps. DEP frequencies from 1 kHz to 80 MHz at fixed 5 volts peak‐to‐peak and medium conductivities of 10^?5 and 10^?3 S/m were tested. DEP responses of ～220 and ～400 nm poly‐l ‐lysine CSnps were quantified via video intensity densitometry at the microdevice's quadrapole electrode center for negative DEP (nDEP) and adjacent to electrodes for positive DEP. Intensity densitometry was then translated into a relative DEP response curve. An unusual nDEP peak occurred at ～57 MHz with 25–80 times greater apparent nDEP force. All electrical circuit components were then impedance matched, which changed the observed response to weak positive DEP at low frequencies and consistently weak nDEP from ～100 kHz to 80 MHz. This impedance‐matched behavior agrees with conventional Clausius–Mossotti DEP signatures taking into account the gas core's contributions to the polarization mechanisms. This work describes a potential pitfall when conducting DEP at higher frequencies in microdevices and concurrently demonstrates nDEP behavior for a chemically and structurally distinct particle system. This work provides insight into organic shell material properties in nanostructures and strategies to facilitate dynamic nanoparticle assemblies.     

Anchored Ni-dimethylglyoxime complex on Fe3O4@SiO2 core/shell nanoparticles for the clean catalytical synthesis of dicoumarols

Ni-Dimethylglyoxime complex immobilized on functionalized Fe₃O₄ was synthesized by a post-grafting way and utilized as a novel, thermally stable, recoverable, and efficient for green synthesis of dicoumarols through reaction of 4-hydroxycoumarin with various aldehydes in excellent yields and higher rate. Fe₃O₄@SiO₂-silylcyclopropyl-dimethylglyoxime-Ni superparamagnetic nanoparticles (MNP_s) were investigated by Fourier transform infrared spectroscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, vibrating sample magnetometer, and Brunauer–Emmett–Teller technique. This nanocatalyst could be conveniently recovered via the use of an external magnetic field and reused for subsequent reactions for at least 7 times without any remarkable change and decrease in catalytic activity.     

Phenyl‐functionalized silica‐coated magnetic nanoparticles for the extraction of chlorobenzenes,and their determination by GC‐electron capture detection

We have prepared a solid phase for the extraction of chlorobenzenes (CBs) by coating magnetic (Fe₃O₄) nanoparticles with silica via a sol‐gel process using a mixture of tetraethoxysilane and triethoxyphenylsilane. The nanoparticles were characterized by SEM, energy‐dispersive spectroscopy, and X‐ray diffractometry. The nanoparticles were used for the extraction of 1,4‐dichlorobenzene (1,4‐DCB), 1,2,3‐trichlorobenzene (1,2,3‐TCB), 1,2,4‐trichlorobenzene (1,2,4‐TCB), and 1,2,3,4‐tetrachlorobenzene (1,2,3,4‐TeCB) from water, followed by their determination by GC‐electron capture detection. Under optimal conditions, enrichment factors ranging from 220 to 360 were obtained. All determination coefficients (r²) are >0.99, and linear response is found in range 0.025–1.5 μg/L (at the lower end), and 6–120 μg/L (at the higher end). Detection limits are 6, 10, 11, and 500 ng/L for 1,2,3,4‐TeCB, 1,2,4‐TCB, 1,2,3‐TCB, and 1,4‐DCB, respectively. All RSDs are <6% (for n = 5). The method was successfully applied to the determination of CBs in environmental water samples.     

Synthesis of trans‐dihydrofurans using bis (1(3‐trimethoxysilylpropyl)‐3‐methyl‐imidazolium) nickel tetrachloride tethered to colloidal silica nanoparticles

An efficient multicomponent synthesis of dihydrofurans is described by a one‐pot condensation reaction of 4‐bromophenacyl bromide, aromatic aldehydes, and dimedone using an ionic liquid tethered to colloidal silica nanoparticles under reflux conditions in acetonitrile. The ionic liquid tethered to colloidal silica nanoparticles is characterized by ¹H NMR spectroscopy, scanning electron microscopy, energy‐dispersive spectroscopy, thermogravimetric analysis, and dynamic light scattering. Atom economy, a wide range of products, high catalytic activity, excellent yields in short reaction times, diastereoselective synthesis, reusability of the catalyst, and low catalyst loading are some of the important features of this protocol.     

Size‐dependent electrophoretic migration and separation of water‐soluble gold nanoclusters by capillary electrophoresis

Recently, water‐soluble gold nanoclusters (AuNCs) have attracted more and more attention due to their unique properties. In this study, penicillamine‐protected gold nanoclusters (Pen‐AuNCs) were synthesized and initially fractionated by sequential size‐selective precipitation (SSSP). The crude Pen‐AuNCs and SSSP fractions were separated by capillary zone electrophoresis (CZE) with a diode array detector. The effects of key parameters, including the concentration of phosphate buffer, pH value and the ethanol content were systematically investigated. The separation of water‐soluble poly‐disperse AuNCs were well achieved at 30 mM phosphate buffer with 7.5% EtOH, pH 12.0, and applied voltage of 15 kV. The linear correlation between AuNCs diameter and mobility was observed. This finding provides an important reference for CE separation and product purification of water‐soluble AuNCs or other nanomaterials.     

Highly selective and recyclable hydrogenation of α‐pinene catalyzed by ruthenium nanoparticles loaded on amphiphilic core–shell magnetic nanomaterials

A multifunctional nanomaterial (Fe₃O₄@SiO₂@C_X@NH₂) comprising a magnetic core, a silicon protective interlayer, and an amphiphilic silica shell is successfully prepared. Ru nanoparticles catalyst loaded on Fe₃O₄@SiO₂@C_X@NH₂ is used in hydrogenation of α‐pinene for the first time. The novel nanomaterial with amphipathy can be used as a solid foaming agent to increase gas–liquid–solid three‐phase contact and accelerate the reaction. Under the mild conditions (40 °C, 1 MPa H₂, 3 h), 99.9% α‐pinene conversion and 98.9% cis‐pinane selectivity are obtained, which is by far the best results reported. Furthermore, the magnetic nanocomposite catalyst can be easily separated by an external magnet and reused nine times with high selectivity maintaining.     

Two‐dimensional non‐close‐packed arrays of nanoparticles via core‐shell nanospheres and reactive ion etching

Nanosized PTFE/polystyrene core‐shell particles were prepared by seed emulsion polymerization technique starting from PTFE seeds of 20 nm. At the end of the reaction, no residual PTFE nor secondary nucleation was observed and by appropriately choosing the ratio between the monomer and the PTFE seed it was possible to obtain particles, with predetermined size in the range 60–100 nm, featuring an extremely narrow size distribution. These particles were successfully employed as building blocks for the preparation of large scale nanosized monolayers through the floating technique. Reactive ion etching was further applied to modulate the size characteristics of the resulting 2D ordered nanostructure. Although for relatively short RIE times a peculiar continuous morphology was observed in which the particles are interconnected through thin arms, on further increasing the RIE time a well‐organized 2D arrangement of particles with size of about 30 nm was obtained. Considering the shell as an expendable ordering and spacing tool, the use of core‐shell nanospheres allows a wide variety of controlled morphologies to be designed and prepared thus opening new perspectives for nanostructure fabrication processes through nanosphere lithography (NSL). Copyright © 2011 John Wiley & Sons, Ltd.     

Preparation and Characterization of Pt/Co‐Core Au‐Shell Magnetic Nanoparticles

Pt/Co‐core Au‐shell nanoparticles were synthesized via a two‐step route using NaBH₄ as a reducing agent. The nanoparticles are characterized by UV‐vis spectroscopy, transmission electron microscopy (TEM) and powder X‐ray diffraction (XRD). The results indicate that the as‐synthesized Pt/Co‐core Au‐shell nanoparticles have a disordered face centered cubic (fcc) structure, whereas the annealed Pt/Co‐core Au‐shell nanoparticles exhibit an ordered face centered tetragonal (fct) structure. Superconducting quantum interference device (SQUID) studies reveal that the coercivity of the annealed Pt/Co‐core Au‐shell nanoparticles increases to 510 Oe after heat treatment at 500 °C for 2 h.     

Comparison of a new high‐resolution monolithic column with core‐shell and fully porous columns for the analysis of retinol and α‐tocopherol in human serum and breast milk by ultra‐high‐performance liquid chromatography†

The reduction of analysis time, cost, and improvement of separation efficiency are the main requirements in the development of high‐throughput assay methods in bioanalysis. It can be achieved either by ultra‐high‐performance liquid chromatography (UHPLC) using stationary phases with small particles (<2 μm) at high back pressures or by using opposite direction—monolithic stationary phases with low back pressures. The application of new types of monolithic stationary phases for UHPLC is a novel idea combining these two different paths. The aim of this work was to test the recently introduced second‐generation of monolithic column Chromolith® HighResolution for UHPLC analysis of liposoluble vitamins in comparison with core‐shell and fully porous sub‐2 μm columns with different particle sizes, column lengths, and shapes. The separation efficiency, peak shape, resolution, time of analysis, consumption of mobile phase, and lifetime of columns were calculated and compared. The main purpose of the study was to find a new, not only economical option of separation of liposoluble vitamins for routine practice.     

Preparation of gel‐silica/ammonium polyphosphate core‐shell flame retardant and properties of polyurethane composites

A novel intumescent gel‐silica/ammonium polyphosphate core‐shell flame retardant (MCAPP), which contains silicon, phosphorus, and nitrogen, has been prepared by in situ polymerization. The structure of MCAPP was characterized by Fourier transform infrared (FTIR) and X‐ray photoelectron spectroscopy (XPS). The properties of MCAPP were investigated by water solubility, hydrophilicity, and morphological determination. The flame retardancy and thermal stability of polyurethane (PU) composite with MCAPP were evaluated by limiting oxygen index (LOI), UL‐94 test, cone calorimetry, and thermogravimetric analysis (TGA). The results showed that MCAPP could decrease the heat release rate (HRR) and increase the thermal stability of PU materials greatly. Finally, water‐resistant properties of PU/FR composites were also studied. Copyright © 2010 John Wiley & Sons, Ltd.     

Determination of the enantiomers of α‐hydroxy‐ and α‐amino acids in capillary electrophoresis with contactless conductivity detection

The enantiomers of the anions of five α‐hydroxy acids, namely lactic acid, α‐hydroxybutyric acid, 2‐hydroxycaproic acid, 2‐hydroxyoctanoic acid and 2‐hydroxydecanoic acid, as well as the two α‐amino acids aspartic acid and glutamic acid, were baseline separated and detected by CE with contactless conductivity detection. Vancomycin was employed as chiral selector and could be used with conductivity detection without having to resort to a partial filling protocol as needed when this reagent is used with UV absorbance measurements. The procedure was successfully applied to the determination of the lactic acid enantiomers in samples of milk and yogurt. Linearity was achieved in the concentration range of 10–500 μmol/L with good correlation coefficients (0.9993 and 0.9990 for L ‐ and D ‐lactic acid, respectively). The LODs (3 S/N) for L ‐ and D ‐lactic acid were determined as 2.8 and 2.4 μmol/L, respectively.     

Chiral separation of the β2‐sympathomimetic fenoterol by HPLC and capillary zone electrophoresis for pharmacokinetic studies

The development of methods for the separation of the enantiomers of fenoterol by chiral HPLC and capillary zone electrophoresis (CZE) is described. For the HPLC separation precolumn fluorescence derivatization with naphthyl isocyanate was applied. The resulting urea derivatives were resolved on a cellulose tris(3,5‐dimethylphenylcarbamate)‐coated silica gel column employing a column switching procedure. Detection was carried out fluorimetrically with a detection limit in the low ng/mL range. The method was adapted to the determination of fenoterol enantiomers in rat heart perfusates using liquid–liquid extraction. As an alternative a CE method was used for the direct separation of fenoterol enantiomers comparing different cyclodextrin derivatives as chiral selectors. Copyright © 2010 John Wiley & Sons, Ltd.     

Methods for the surface functionalization of γ‐Fe2O3 nanoparticles with initiators for atom transfer radical polymerization and the formation of core–shell inorganic–polymer structures

Carboxylic acid capped γ‐Fe₂O₃ nanoparticles were prepared by the standard decomposition of Fe(CO)₅ in di‐n‐octyl ether and oleic acid. Two methods were employed to introduce surface functionality to the nanoparticles. First, a thermally stable, tert‐butyldiphenylsilyl‐protected hydroxyl group was incorporated into the carboxylic acid surfactant used during the synthesis. Subsequent deprotection and transformation installed a 2‐bromopropionyl ester group on the particle surface (the functional‐group‐interchange method). The resulting nanoparticles were 4.53 nm in average diameter and were characterized with IR spectroscopy, transmission electron microscopy (TEM), selected area electron diffraction, and elemental analysis. Second, a 2‐bromopropionyl ester group was installed on the particle surface after synthesis via the exchange of the surface oleic acid with a carboxylic acid containing the desired 2‐bromopropionyl ester unit (the ligand‐exchange method). The resulting nanoparticles were 4.30 nm in average diameter and were characterized with IR spectroscopy, TEM, and elemental analysis. Monitoring the percentage of bromine incorporated into the nanoparticle sample versus the ligand‐exchange reaction time indicated that the number of initiator‐containing carboxylic acids that could be exchanged onto the surface was limited, presumably by the steric size of the 2‐bromopropionyl ester group. Styrene was then polymerized directly off γ‐Fe₂O₃ nanoparticles, and this yielded hybrid core–shell structures. The measurements of the magnetic properties of the samples demonstrated that the magnetism of the core γ‐Fe₂O₃ nanoparticle did not change during the performance of the chemical transformations. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3675–3688, 2005     

Separation of β-lactoglobulin A, B and C variants of bovine whey using capillary zone electrophoresis

β-Lactoglobulin is a whey protein that affects milk composition and product functionality and which can be present in up to eight genetic variant forms. A free zone capillary electrophoresis method has been developed to separate and identify the β-lactoglobulin A, B and C variants. Three buffer systems [borate, 2-(N-morpholino)-ethanesulphonic acid (MES) and bis(2-hydroxyethyl)imino-tris(hydroxymethyl)methane (Bistris)] were examined over a range of pH values and with the addition of the separation buffer modifiers Tween 20 and/or ethanolamine. The most successful combination of these was 50 mM MES at pH 8.0 with the addition of 0.1% Tween 20 which clearly resolved the three variants from both each other and from the other whey proteins even though the MES buffer was acting well outside its pK_a range (pH 5.3–7.3). The retention times and identification of the individual variants were verified by spiking with commercially purified β-lactoglobulin A and B proteins and a β-lactoglobulin AC whey. The method was then used to phenotype β-lactoglobulin in a sample population of New Zealand Jersey cows.     

Synthesis and characterization of nonaqueous dispersion particles with photolabile α‐heptadecylphenacyl ester stabilizer chains

We describe a new method for the synthesis of core–shell photolabile nanoparticles. The synthesis begins with the batch emulsion copolymerization of n‐butyl methacrylate (BMA) and ethylene glycol dimethacrylate to form small (20‐nm‐diameter) crosslinked particles with a narrow size distribution. These seeds are then used for a second‐stage emulsion copolymerizations in which BMA and various polar monomers, including methacrylic acid, are added under monomer‐starved conditions. After characterization of the particles, they are transferred to an N,N‐dimethylformamide solution. The cesium salt of the carboxylic acid groups is reacted with 2‐bromo‐1‐phenyl‐octadecan‐1‐one to convert various fractions of the ? COOH groups to the corresponding 2‐benzoylheptadecyl ester groups. These aliphatic ester groups render the surface sufficiently hydrophobic that the particles can be dispersed in common aliphatic hydrocarbons solvents to yield colloidal dispersions, sterically stabilized by the dangling aliphatic chains. Ester groups with a phenyl ketone attached to the β‐carbon are photolabile. Irradiation of the particles with UV light detaches the sterically stabilizing chains from the particle and transforms the surface groups back to COOH groups. This leads to flocculation of the particles. The emphasis in this article is on the optimization of the particle synthesis and the characterization of the particles obtained. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2642–2657, 2001     

Separation of α‐ from β‐arylalanines by nickel nitrilotriacetate chromatography

A method is described to separate α‐ from β‐arylalanines by ligand exchange chromatography on a nickel nitrilotriacetate agarose column with UV monitoring of the effluent. Separate mixtures containing an α‐ and β‐arylalanine pair (1 mg of each) were individually loaded onto the nickel resin pre‐equilibrated with the mobile phase at room temperature, and the amino acids were eluted from the column with a gradient from pH 12.0–8.0. The β‐arylalanines eluted first, followed by the α‐isomers. The four α/β‐amino acid pairs tested were well separated with baseline resolution. An aliquot of each fraction was chemically treated to derivatize the amino acids to their N‐acyl methyl ester analogs, and their identities were confirmed by GC/MS analysis. The sample recovery was quantitative (>98%), and the column matrix was very resilient, as demonstrated by consistent separation of the solutes after ～100 preparative cycles.     

Fabrication of mesoporous SiO2–C–Fe3O4/γ–Fe2O3 and SiO2–C–Fe magnetic composites

A synthetic method for the fabrication of silica-based mesoporous magnetic (Fe or iron oxide spinel) nanocomposites with enhanced adsorption and magnetic capabilities is presented. The successful in situ synthesis of magnetic nanoparticles is a consequence of the incorporation of a small amount of carbon into the pores of the silica, this step being essential for the generation of relatively large iron oxide magnetic nanocrystals (10 ± 3 nm) and for the formation of iron nanoparticles. These composites combine good magnetic properties (superparamagnetic behaviour in the case of SiO₂–C–Fe₃O₄/γ–Fe₂O₃ samples) with a large and accessible porosity made up of wide mesopores (>9 nm). In the present work, we have demonstrated the usefulness of this kind of composite for the adsorption of a globular protein (hemoglobin). The results obtained show that a significant amount of hemoglobin can be immobilized within the pores of these materials (up to 180 mg g⁻¹ for some of the samples). Moreover, we have proved that the composite loaded with hemoglobin can be easily manipulated by means of an external magnetic field.