Aluminum five‐ and six‐coordination in bis(acetylacetonato)aminoalkoxides

Reactions of bis(acetylacetonato)aluminum(III)‐di‐μ‐isopropoxo‐di‐isopropoxo aluminum(III), [(CH₃COCHCOCH₃)₂Al(μ‐OPrⁱ)₂Al(OPrⁱ)₂] with aminoalcohols, (HO R NR¹R²) in 1:1 and 1:2 molar ratios in refluxing anhydrous benzene yielded binuclear complexes of the types [(CH₃COCHCOCH₃)₂Al(μ‐OPrⁱ)₂Al(O R NR¹R²)(OPrⁱ)] and [(CH₃COCHCOCH₃)₂Al(μ‐OPrⁱ)₂Al(O R NR¹R²)₂] (R   (CH₂)₃ , R¹ = R² = H; R =  CH₂C(CH₃)₂ , R¹ = R² = H; R =  (CH₂)₂ , R¹ = H, R² =  CH₃; and R   (CH₂)₂ , R¹ = R² = CH₃), respectively. All these compounds are soluble in common organic solvents and exhibit sharp melting points. Molecular weight determinations reveal their binuclear nature in refluxing benzene. Plausible structures have been proposed on the basis of elemental analysis, molecular weight measurements, IR, NMR (¹H, ¹³C, and ²⁷Al), and FAB mass spectral studies. ²⁷Al NMR spectra show the presence of both five‐ and six‐coordinated aluminum sites. © 2003 Wiley Periodicals, Inc. Heteroatom Chem 14:518–522, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.10184     

Silicon‐terminated telechelic oligomers by ADMET chemistry: Synthesis and copolymerization

Methoxydimethylsilane and chlorodimethylsilane‐terminated telechelic polyoctenomer oligomers (POCT) have been prepared by acyclic diene metathesis (ADMET) chemistry using Grubbs' ruthenium Ru(Cl₂)(CHPh)(PCy₃)₂ [Ru] or Schrock's molybdenum Mo(CH CMe₂Ph)(N 2,6 C₆H₃ i Pr₂)(OCMe(CF₃)₂)₂ [Mo] catalysts. These macromolecules have been characterized by FTIR, ¹H‐, ¹³C‐, and ²⁹Si‐NMR spectroscopy. The molecular weight distributions of these polymers have been determined by GPC and vapor pressure osmometry (VPO). The number‐average molecular weight (M_n) values of the telechelomers are dictated by the initial ratio of the monomer to the chain limiter. The termini of these oligomers (M_n = 2000) can undergo a condensation reaction with hydroxy‐terminated poly(dimethylsiloxane) (PDMS) macromonomer (M_n = 3300) [HO Si(CH₃)₂ O { Si(CH₃)₂O }_x  Si(CH₃)₃], producing an ABA‐type block copolymer, as follows: (CH₃)₃SiO [ Si(CH₃)₂O ]_x [ CHCH (CH₂)₆ ]_y [ OSi(CH₃)₂ ]_x OSi(CH₃)₃. The block copolymers were characterized by ¹H‐ and ¹³C‐NMR spectroscopy, VPO, and GPC, as well as elemental analysis, and were determined by VPO to have a M_n of 8600. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 849–856, 1999     

Supramolecular hexagonal structure of a segmented liquid crystalline polyester with allyl group as lateral substituent

The molecular structure of the phase—stable at room temperature—for the polymer with formula [ p C₆H₄ COO p C₆H₃(R) p C₆H₃(R) OOC p C₆H₄ O (CH₂)₁₀O ]_x, with R =  CH₂ CHCH₂, is reported. The cell is hexagonal (a = b = 13.43 Å, c = 33.3 Å, γ = 120°), space group P6₃, six chains per unit cell (d_calcd = 1.23 g cm⁻³). The six chains are packed together to give a bundle with the center of mass set at the origin of the unit cell. The allyl groups are placed inside the bundle, thus explaining the unexpected reactivity of the double bonds to give crosslinking when fiber samples are annealed in the solid state. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1601–1607, 1999     

New dithiazinanes and bis‐dithiazinanes‐bearing pendant ethylamines: Structure and reactivity

The structure and reactivity of a series of new ethylaminedithiazinanes and bis‐diethylaminedithiazinanes synthesized from formaldehyde, NaSH, and N,N‐dimethyl‐ethylene‐diamine ( 1 ), N‐methyl‐ethylene‐diamine ( 2 ), and N‐ethyl‐ethylene‐diamine ( 3 ) are reported. Compound 1 afforded 2‐([1,3,5]‐dithiazinan‐5‐yl)‐ethylene‐N,N‐dimethyl‐amine ( 4 ). The reaction of 4 with dry CH₂Cl₂ gave N‐{2‐([1,3,5]dithiazinan‐5‐yl)‐ethylene}‐N‐chloromethyl‐N,N‐dimethyl‐ammonium chloride ( 5 ) in high yield, whereas in wet CH₂Cl₂ and DMSO provided a mixture of 5 with N‐{2‐([1,3,5]‐dithiazinan‐5‐yl)‐ethylene}‐N,N‐dimethyl‐ammonium hydrochloride ( 6 ).bis‐{2‐([1,3,5]‐Dithiazinan‐5‐yl)‐ethylene‐N‐alkyl‐amino}‐methylene‐disulfides ( 7 ) and ( 8 ) formed by two dithiazinanes linked through the chain  (CH₂)₂ NRCH₂ S S CH₂ NR (CH₂)₂‐ ( 7 R = methyl, 8 R = ethyl) reacted with CH₂Cl₂ giving after neutralization of the hydrolysis products the ethylaminedithiazinanes with different pendant N‐groups [ (CH₂)₂NMeH₂⁺( 9 );  (CH₂)₂NEtH₂⁺ ( 10 );  (CH₂)₂NMeH ( 11 );  (CH₂)₂NEtH ( 12 );  (CH₂)₂NMeHBH₃ ( 13 )  (CH₂)₂NEtHBH₃ ( 14 ).  (CH₂)₂NMe₂BH₃ ( 15 ), and  (CH₂)₂NEtMeBH₃.( 16 )]. The x‐ray diffraction analyses of compounds 5 , 6 , 9 , and 10 are reported. Variable temperature NMR experiments afforded the Δ G^≠ of the ring interconversion of the six‐membered heterocycles 6 , 9 , and 10 . © 2010 Wiley Periodicals, Inc. Heteroatom Chem 22:59–71, 2011; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20657     

Preparation of poly(alkylenebenzimidazole) by ruthenium complex catalyzed polycondensation of 3,3′‐diaminobenzidine with α,ω‐diols

The reactions of 3,3′‐diaminobenzidine with 1,12‐dodecanediol in 1 : 1–1:3 molar ratios in the presence of RuCl₂(PPh₃)₃ catalyst give poly(alkylenebenzimidazole), [ (CH₂)₁₁ O (CH₂)₁₁ Im / (CH₂)₁₀ Im ]_n (Im: 5,5′‐dibenzimidazole‐2,2′‐diyl) (I_a‐I_d) in 71–92% yields. The relative ratio between the [(CH₂)₁₁ O (CH₂)₁₁ Im ] unit (A) and the [‐ (CH₂)₁₀ Im ] unit (B) in the polymer chain varies depending on the ratio of the substrates used. The polymer I_a obtained from the 1 : 3 reaction contains these structural units in a 98 : 2 ratio. The polymers are soluble in polar solvents such as DMF (N,N‐dimethylformamide), DMSO (dimethyl sulfoxide), and NMP (N‐methyl‐2‐pyrrolidone) and have molecular weights M_n (M_w) of 4,200–4,800 (4,800–6,500) by GPC (polystyrene standard). The polymerization of the diol and 3,3′‐diaminobenzidine in higher molar ratios leads to partial cross‐linking of the resulting polymers I_e and I_f via condensation of imidazole NH group with CH₂OH group. Similar reactions of 3,3′‐diaminobenzidine with α,ω‐diols, HO(CH₂)_mOH (m = 4–10), in a 1 : 3 molar ratio give the polymers containing [ (CH₂)_m−1 O (CH₂) _m−1 Im ] and [ (CH₂) _m−2 Im ] units with partial cross‐linked structures. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1383–1392, 1999     

Living cationic polymerization route to poly(oligooxyethylene carbonate) vinyl ethers

The addition of dialkyl (R = Me or Et) carbonates to poly(oxyethylene)-based solid polymeric electrolytes resulted in enhanced ionic conductivities. Relatively high conductivities in lithium batteries with solutions of lithium salts in di(oligooxyethylene) carbonates such as R( OCH₂ CH₂ )_nOC(O) O ( CH₂CH₂O )_mR (R = Et, n = 1, 2, or 3, m = 0, 1, 2, or 3) and related carbonates were obtained. In this respect, related comb-shaped poly(oligooxyethylene carbonate) vinyl ethers of the type  CH₂CH(OR) were prepared [R = ( OCH₂ CH₂ )_nOC(O) O ( CH₂CH₂O )_mR′; (1) n = 2 or 3, m = 0, R′ = Et; (2) n = 2 or 3; m = 3, R′ = Me]. The direct preparation of derived target polymers of this class by polymerization of the corresponding vinyl ether-type monomers could not be achieved because of a rapid in situ decarboxylative decomposition of these monomers (as formed) during the final step of their synthesis. Instead, a prepolymer was prepared by a living cationic polymerization of CH₂CH (OCH₂CH₂ )_n O C(O) CH₃ (n = 2 or 3). The hydrolysis of its pendant ester groups, followed by the reaction of the hydrolyzed prepolymer with each of several alkyl chloroformates of the type Cl C(O) O( CH₂CH₂O )_mR′ (m = 0, 2, or 3, R′ = Me or Et) resulted in the corresponding target polymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2171–2183, 2002     

Synthesis of ladder polymers containing polydiacetylene backbones connected with methylene chains and their optical properties

The polymers consisting of polydiacetylene (PDA) backbones were obtained from the novel monomer derivatives, R CC CC R′ CC CC R [where R =  (CH₂)₄OCONHCH₂COOC₄H₉, R′ =  (CH₂)_n ; n = 2, 4, 8] [4BCMU4A(n)], in which linear methylene chain is sandwiched between two diacetylene moieties by solid-state 1,4-addition reaction. The polymerization process was investigated in detail by using spectroscopic techniques such as solid-state ¹³C-NMR, visible absorption, and IR absorption spectra. It was estimated that the polymerization of 4BCMU4A(8) and 4BCMU4A(4) takes place by two consecutive 1,4-addition reactions to form two PDA backbones, which constitute the two poles of the respective ladders. The bridging methylene chain length in the monomer was found to play a vital role as far as the polymerization process is concerned. Thus, the monomers with eight or four methylene units could form the ladder–PDAs by a two-step process, whereas the monomer containing two methylene units could only undergo one-step of 1,4-addition reaction. Further, it was found that the crystallinity of the polymers depends on the methylene chain length in the monomers, 4BCMU4A(8) being the most crystalline of all. These structural features strongly affect their absorption spectra. The third-order nonlinear optical susceptibilities (χ⁽³⁾) for these polymers were measured using third-harmonic generation method. The largest χ⁽³⁾ value obtained was 3.4 × 10⁻¹¹ esu for the poly[4BCMU4A(8)] thin film in resonant region. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3537–3548, 1999     

Ru and Sm catalyzed polyaddition of dialdehydes to give polyesters. Application of Tishchenko type reactions to polymer synthesis

RuH₂(PPh₃)₄ catalyzed Tishchenko type polyaddition of terephthal-aldehyde gives aromatic polyester ( 1 ), which contains three structural units, [OCH₂ C₆H₄ CH₂O] ( 1a ), [OCH₂ C₆H₄ CO] ( 1b ), and [CO C₆H₄ CO] ( 1c ). ¹H-NMR spectrum shows the presence of the three units in a 1 : 2 : 1 ratio. Isophthalaldehyde also undergoes similar polyaddition to give another aromatic polyester ( 2 ), while 1,12-dodecanedial gives an aliphatic polyester ( 3 ) containing the following structural units: [OCH₂ (CH₂)₁₀ CH₂O] ( 3a ), [OCH₂ (CH₂)₁₀ CO] ( 3b ), and [CO (CH₂)₁₀ CO] ( 3c ). The above polymers have M_n of 2.7 × 10³−5.4 × 10³ and M_w of 4.3 × 10³ − 9.7 × 10³, respectively. Mixtures of terephthalaldehyde and 1,12-dodecanedial produce copolymers, which contain the units 1a–1c and 3a–3c in a random sequence. In the copolymerization, terephthalaldehyde shows a strong tendency to give 1c units, whereas 1,12-dodecanedial predominantly affords 3a units. SmI₂ also catalyzes polyaddition of terephthalaldehyde to give the corresponding polyester with M_n of 1.7 × 10³ and M_w of 3.7 × 10³, respectively. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1265–1273, 1997     

Kinetic study of the reaction of OH with a series of acetals at 298 ± 4 K

Rate coefficients have been measured at 298 ± 4 K and 1000 mbar total pressure for the reactions of OH with a series of symmetrical acetals (R O CH₂ O R, R = C₁ to C₄) using a relative kinetic technique. The investigations have been performed in a laboratory photoreactor and also in the large outdoor EUPHORE simulation chamber facility in Valencia, Spain. The following rate coefficients (in units of 10⁻¹¹ cm³ molecule⁻¹ s⁻¹) have been obtained: dimethoxy methane (R = CH₃), 0.49 ± 0.02; diethoxy methane (R = CH₃CH₂), 1.84 ± 0.18; di‐n‐propoxy methane (R = CH₃CH₂CH₂), 2.63 ± 0.49; di‐iso‐propoxy methane (R = (CH₃)₂CH), 3.93 ± 0.48; di‐n‐butoxy methane (R = CH₃CH₂CH₂CH₂), 3.47 ± 0.42; di‐iso‐butoxy methane (R = (CH₃)₂CHCH₂), 3.68 ± 0.57; di‐sec‐butoxy methane (R = CH₃CH₂C(CH₃)H), 4.68 ± 0.05. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 797–803, 1999     

Preparation of β2‐Homotryptophan Derivatives for β‐Peptide Synthesis

In view of the prominent role of the 1H‐indol‐3‐yl side chain of tryptophan in peptides and proteins, it is important to have the appropriately protected homologs H‐β² HTrp OH and H‐β³ HTrp OH (Fig.) available for incorporation in β‐peptides. The β²‐HTrp building block is especially important, because β²‐amino acid residues cause β‐peptide chains to fold to the unusual 12/10 helix or to a hairpin turn. The preparation of Fmoc and Z β²‐HTrp(Boc) OH by Curtius degradation (Scheme 1) of a succinic acid derivative is described (Schemes 2–4). To this end, the (S)‐4‐isopropyl‐3‐[(N‐Boc‐indol‐3‐yl)propionyl]‐1,3‐oxazolidin‐2‐one enolate is alkylated with Br CH₂CO₂Bn (Scheme 3). Subsequent hydrogenolysis, Curtius degradation, and removal of the Evans auxiliary group gives the desired derivatives of (R)‐H β²‐HTrp OH (Scheme 4). Since the (R)‐form of the auxiliary is also available, access to (S)‐β²‐HTrp‐containing β‐peptides is provided as well.     

Sulfonic acids as water‐soluble initiators for cationic polymerization in aqueous media with Yb(OTf)3

Aqueous sulfonic acids (HOSO₂R; R = CH₃, Ph‐p‐CH₃, and Ph‐p‐NO₂), coupled with a water‐tolerant Lewis acid, ytterbium triflate [Yb(OTf)₃; OTf =  OSO₂CF₃], initiate the cationic suspension polymerization of p‐methoxystyrene (pMOS) in heterogeneous aqueous media. They induce controlled polymerization of pMOS at 30 °C, and the molecular weights of the polymers (weight‐average molecular weight/number‐average molecular weight ∼ 1.7) increase with conversion. These suspension polymerizations are initiated by the entry of sulfonic acid from the aqueous phase into the organic phase and proceed via reversible activation of the sulfonyl terminus by the Lewis acid. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2728–2733, 2000     

Synthesis of Chain‐End Functionalized Polyolefins with a Bis(phenoxy imine) Titanium Catalyst

Polyethylenes and highly syndiotactic poly(propylene)s possessing chain end hydroxyl groups were synthesized by living polymerizations using L₂TiCl₂ [ 1 , L: C₆F₅NCH(2 O C₆H₃ 3 ^tBu)]/MAO and functionalized α‐olefins, H₂CCH(CH₂)_n Y [ 2 ; YOAlMe₂, n = 4 ( 2a ); YOSiMe₃, n = 9 ( 2b )]. Because the primary insertion of 2 to a cationic species L₂Ti⁺ Me ( 3 ) derived from 1 /MAO is much faster than the successive secondary insertion of 2 , addition of an equimolar amount of 2 to 3 resulted in the quantitative formation of L₂Ti⁺ CH₂ CH(Me) (CH₂)_n Y [ 4 ; YOAlMe₂, n = 4 ( 4a ); YOSiMe₃, n = 9 ( 4b )]. These cationic species 4 served as functionalized initiators for the living polymerization of both ethylene and propylene and afforded polyolefins having extremely narrow molecular weight distributions and a hydroxyl group at the initiating chain end. The terminating chain end of the syndiotactic poly(propylene)s was also functionalized by adding an excess amount of 2b as a chain end capping agent to the living L₂Ti–polymeryl species. Due to much slower insertion of the second molecule of 2b relative to the first one, the obtained polymers were end capped quantitatively by a single molecule of 2b . Telechelic syndiotactic poly(propylene)s were successfully synthesized through a living polymerization initiated by 4b and an end capping using 2b .

     

Gas‐Phase Structure Determination of Dihydroxycarbene,One of the Smallest Stable Singlet Carbenes

Carbenes are reactive molecules of the form R¹ C̈ R² that play a role in topics ranging from organic synthesis to gas‐phase oxidation chemistry. We report the first experimental structure determination of dihydroxycarbene (HO C̈ OH), one of the smallest stable singlet carbenes, using a combination of microwave rotational spectroscopy and high‐level coupled‐cluster calculations. The semi‐experimental equilibrium structure derived from five isotopic variants of HO C̈ OH contains two very short CO single bonds (ca. 1.32 Å). Detection of HO C̈ OH in the gas phase firmly establishes that it is stable to isomerization, yet it has been underrepresented in discussions of the CH₂O₂ chemical system and its atmospherically relevant isomers: formic acid and the Criegee intermediate CH₂OO.     

Effect of fluorinated/non‐fluorinated β‐diketones and side‐chain branching of N‐protected amino acids on the antibacterial potential of new heptacoordinated monobutyltin(IV) complexes

The effect of fluorinated/non‐fluorinated β‐diketones and side‐chain branching of N‐protected amino acids on the antibacterial potential of new heptacoordinated monobutyltin(IV) complexes was investigated. New heptacoordinated monobutyltin(IV) complexes having the general formulae BuSn(A)₂B and BuSnA(B)₂ [where AH = (1,3‐dihydro‐1,3‐dioxo‐α‐(substituted)‐2H ‐isoindole‐2‐acetic acids, N‐protected amino acids), R =  CH(CH₃)CH₂CH₃: A₁H; R =  CH(CH₃)₂: A₂H; and BH = R'COCH₂COR″ (β‐diketones), R′ = R″ =  CH₃: B₁H; R′ =  CH₃, R″ =  C₆H₅: B₂H; R′ =  CF₃, R″ =  C₆H₅: B₃H] were synthesized. Complexes BuSn(A)₂B and BuSnA(B)₂ were generated by the reaction of sodium salts of the ligands AH and BH with BuSnCl₃ in 2:1:1 and 1:2:1 molar ratios, respectively. These newly generated complexes were characterized in physicochemical and spectroscopic studies. These complexes contain heptacoordinated tin centres as revealed by ¹¹⁹Sn NMR chemical shift values. Some of the newly generated complexes and their corresponding ligands were screened for their antibacterial activity to study the structure–activity relationship.     

Kinetics and products of propargyl (C3H3) radical self‐reactions and propargyl‐methyl cross‐combination reactions

Propargyl (HCC CH₂) and methyl radicals were produced through the 193‐nm excimer laser photolysis of mixtures of C₃H₃Cl/He and CH₃N₂CH₃/He, respectively. Gas chromatographic and mass spectrometric (GC/MS) product analyses were employed to characterize and quantify the major reaction products. The rate constants for propargyl radical self‐reactions and propargyl‐methyl cross‐combination reactions were determined through kinetic modeling and comparative rate determination methods. The major products of the propargyl radical combination reaction, at room temperature and total pressure of about 6.7 kPa (50 Torr) consisted of three C₆H₆ isomers with 1,5‐hexadiyne(CHC CH₂ CH₂ CCH, about 60%); 1,2‐hexadiene‐5yne (CH₂CC CH₂ CCH, about 25%); and a third isomer of C₆H₆ (∼15%), which has not yet been, with certainty, identified as being the major products. The rate constant determination in the propargyl‐methyl mixed radical system yielded a value of (4.0 ± 0.4) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹ for propargyl radical combination reactions and a rate constant of (1.5 ± 0.3) × 10⁻¹⁰ cm³ molecule⁻¹ s⁻¹ for propargyl‐methyl cross‐combination reactions. The products of the methyl‐propargyl cross‐combination reactions were two isomers of C₄H₆, 1‐butyne (about 60%) and 1,2‐butadiene (about 40%). © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 118–124, 2000     

Study on thermal degradation mechanisms of comb polyacrylates containing long fluorocarbon side chains by TG/FTIR

Thermal degradation of two series of polyacrylates containing long fluorocarbon chains [abbr.: PF_nA {HCF₂(CF₂)_n−1  CH₂ O C(O) , n = 4, 6, 8, 10} and abbr.: PFF_nEA {CF₃(CF₂)_n−1  CH₂CH₂ O C(O) , n = 6, 8, 10}] was investigated by TG /FTIR. Thermal degradation behavior of polymers changed depending on the type of tie groups, which link the fluorocarbon chains to the main chain, and also on the length of fluorocarbon chains. It was clarified that the apparent activation energies (ΔE_a ) of PF_nA series obtained by Ozawa's method varied in the order of PF₄A > PF₆A > PF₈A > PF₁₀A, while those of PFF_nEA series having tie group of  CH₂ CH₂ O C(O) were almost constant. The results for PF_nA series (tie group:  CH₂ O C(O) ) are attributable to the shield effect of long fluorocarbon chains on the back‐biting reaction in the thermal degradation of comb polymers rather than the change of C C bond dissociation energy in the main chain. It was found that TG curves of PFF_nEA series were shifted to the lower temperature region than those of PF_nA. This result can be attributable to the scission of side groups followed by the evaporation of fluorocarbon compounds and carbon dioxide. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2794–2803, 2000     

UV Laser‐Induced Gas‐Phase Copolymerization of Carbon Disulfide and Ethene

Summary: The laser irradiation at 193 nm of a gaseous mixture of carbon disulfide and ethene induces the copolymerization of both compounds and affords the chemical vapour deposition of a C/S/H polymer, the composition of which indicates the reaction between two to three CS₂ molecules and one C₂H₄ molecule. Polymer structure is interpreted on the basis of X‐ray photoelectron and FT‐IR spectra as consisting of >CS, >CC<,  CH₂ CH₂ , (CC)S_nC_{4 − n},  C (CS) S ,  S (CS) S , and C S S C configurations. The gas‐phase copolymerization of carbon disulfide and ethene represents the first example of such a reaction between carbon disulfide and a common monomer.

Scheme showing the expected reaction of excited CS₂ molecules with other CS₂ molecules to form dimers, which then react with another CS₂ molecule or add to ethene.     

Bis(trimethylsilyl)diazene revisited. Density functional theory (DFT) calculations of nitrogen NMR parameters of some azo‐compounds

Calculations of nitrogen NMR parameters [chemical shifts δN and indirect nuclear spin–spin coupling constants J(N,N), J(N,¹³C), J(²⁹Si,N)] of noncyclic azo‐compounds R¹ NN R² (R¹, R² = H, Me, Ph, SiH₃, SiMe₃) and cyclic azo‐compounds [NNCH₂, NN(CH₂)₃ NN(CH₂)₂SiH₂, and NN(SiH₂CH₂SiH₂)] by density functional theory (DFT) methods [B3LYP/6‐311+G(d,p) level of theory] provide data in reasonable agreement with experimental values. The influence of cis‐ and trans‐geometry is reflected by the calculations, and amino‐nitrenes are also included for comparison. The spin–spin coupling constants are analyzed with respect to contact (Fermi contact term, FC) and non‐ contact contributions (paramagnetic and diamagnetic spin‐orbital terms, PSO and DSO, and spin‐dipole term, SD). Bis(trimethylsilyl)diazene 6a can be generated by an alternative method, using the reaction of bis(trimethylsilyl)sulfur diimide with bis‐ (trimethylsilyl)amino‐trimethylsilylimino‐phosphane. © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:84–91, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.20075     

Gel formation in cationic polymerization of divinyl ethers. I. 1,4-Bis(2-vinyloxyethoxy)benzene

Polymerization of 1,4-bis(2-vinyloxyethoxy)benzene (CH₂C O CH₂ CH₂ O C₆H₄ O CH₂CH₂ O CCH₂; 1 ) was investigated in CH₂Cl₂ at 0°C with the use of a variety of cationic initiators. SnCl₄, SnBr₄, AlEtCl₂, and BF₃OEt₂ (strong Lewis acids) and CF₃SO₃H (a strong protonic acid) yielded crosslinked insoluble polymers immediately after the polymerizations were initiated. The binary initiating systems such as HCl/ZnCl₂ and (C₆H₅O)₂P(O)OH/ZnCl₂ also produced insoluble poly( 1 )s. At the low initial concentration of ZnCl₂, however, the (C₆H₅O)₂P(O)OH/ZnCl₂ system gave the soluble polymers quantitatively, and gelation occurred only when the reaction mixture was stored for a long time after complete consumption of the monomer. The content of the unreacted pendant vinyl ether groups of the soluble polymers decreased with monomer conversion, and almost all the pendant vinyl ether groups were consumed in the soluble polymer obtained at 100% monomer conversion; this may be ascribed to frequent occurrence of intramolecular crosslinking. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 675–683, 1998     

A Series of [Mn6] Complexes with Terminal Functional Groups

A series of [Mn₆O₂(R¹OH)₄(sao)₆(R²COO)₂] complexes with terminal functional groups ( 1 : R¹ = CH₃, R² = HO‐C₆H₄, 2 : R¹ = C₂H₅, R² = H₂N‐C₆H₄, 3 : R¹ = CH₃, R² = Cl‐C₆H₄, 4 : R¹ = CH₃, R² = CH₃S‐C₆H₄, 5 : R¹ = CH₃, R² = I‐C₆H₄, 6 : R¹ = CH₃, R² = pymSCH₂, 7 : R¹ = CH₃, R² = ortho‐pyr‐SCH₃, 8 : R¹ = C₂H₅, R² = (CH₃)₃OOCNHCH₂C₆H₄; sao = doubly deprotonated salicylaldoxime ligand, pym = pyrimidyl, pyr = pyridyl) have been obtained in a reaction of a ligand R²C₆H₄COOH, salicylaldoxime, manganese(II) perchlorate and [NEt₄](OH) in methanol or a 1:1 mixture of ethanol and dichloromethane. In this report, structural aspects as well as preliminary studies of magnetic and thermal properties are presented. Compounds 1 , 3 , 6 , 8 exhibit an antiferromagnetic coupling of the Mn²⁺ ions, whereas 4 and 7 show ferromagnetic interactions. The title compounds may act as starting materials for further derivatization addressing the functional groups.