Stereoselective Total Synthesis of Decytospolides A and B Starting from D‐Mannitol

The stereoselective total synthesis of decytospolides A and B, two naturally occurring pyran derivatives, has been achieved using D ‐mannitol as the starting material. The intramolecular oxa‐Michael reaction has been employed to construct the tetrahydropyran ring of the molecules and Weinreb amide formation to generate their side chain with a keto function.     

Stereoselective Total Synthesis of Passifloricin A

The stereoselective total synthesis of passifloricin A ( 1 ), a naturally occurring dihydropyranone with leishmanicidal and antiprotozoal activities, has been accomplished starting from protected glyceraldehyde using Maruoka asymmetric allylation, diastereoselective iodo‐carbonate cyclization, and Grubbs' olefin metathesis reactions as the key steps.     

Asymmetric Synthesis of Simplactones A and B

A new, simple, and short route for the synthesis of simplactones A ( 1 ) and B ( 2 ) was achieved from a synthetically prepared chiral auxiliary, i.e., the Oppolzer camphor‐derived sultam 4 , and (4‐methoxybenzyl)‐protected 3‐hydroxypropanal, in 52 and 48% overall yield, respectively, and with high diastereoselectivity (Schemes 2 and 3).     

Stereoselective Total Synthesis of Rugulactone

The stereoselective synthesis of the naturally occurring dihydropyranone rugulactone has been accomplished starting from 3‐phenylpropan‐1‐ol employing Maruoka allylation and ring‐closing metathesis as the key steps.     

Synthesis of poly(D,L‐lactic acid‐alt‐glycolic acid) from D,L‐3‐methylglycolide

D ,L ‐3‐Methylglycolide (MG) was synthesized via two step reactions with a good yield (42%). It was successfully polymerized in bulk with stannous octoate as a catalyst at 110 °C. The effects of the polymerization time and catalyst concentration on the molecular weight and monomer conversion were studied. Poly(D ,L ‐lactic acid‐co‐glycolic acid) (D ,L ‐PLGA50; 50/50 mol/mol) copolymers were successfully synthesized from the homopolymerization of MG with high polymerization rates and high monomer conversions under moderate polymerization conditions. ¹H NMR spectroscopy indicated that the bulk ring‐opening polymerization of MG conformed to the coordination–insertion mechanism. ¹³C NMR spectra of D ,L ‐PLGA50 copolymers obtained under different experimental conditions revealed that the copolymers had alternating structures of lactyl and glycolyl. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4179–4184, 2000     

A Stereoselective Total Synthesis of Verbalactone

A stereoselective total synthesis of verbalactone has been achieved starting from commercially available hexanal. The sequence involves Maruoka allylation, diastereoselective iodine‐induced electrophillic cyclization, ring opening of epoxide, and Yamaguchi macrolactonization as the key steps.     

New hydrophobic L‐amino acid salts: maleates of L‐leucine,L‐isoleucine and L‐norvaline

Crystals of maleates of three amino acids with hydrophobic side chains [L‐leucenium hydrogen maleate, C₆H₁₄NO₂⁺·C₄H₃O₄⁻, (I), L‐isoleucenium hydrogen maleate hemihydrate, C₆H₁₄NO₂⁺·C₄H₃O₄⁻·0.5H₂O, (II), and L‐norvalinium hydrogen maleate–L‐norvaline (1/1), C₅H₁₁NO₂⁺·C₄H₃O₄⁻·C₅H₁₂NO₂, (III)], were obtained. The new structures contain C₂²(12) chains, or variants thereof, that are a common feature in the crystal structures of amino acid maleates. The L‐leucenium salt is remarkable due to a large number of symmetrically non‐equivalent units (Z′ = 3). The L‐isoleucenium salt is a hydrate despite the fact that L‐isoleucine is a nonpolar hydrophobic amino acid (previously known amino acid maleates formed hydrates only with lysine and histidine, which are polar and hydrophilic). The L‐norvalinium salt provides the first example where the dimeric cation L‐Nva...L‐NvaH⁺ was observed. All three compounds have layered noncentrosymmetric structures. Preliminary tests have shown the presence of the second harmonic generation (SGH) effect for all three compounds.     

Electrochemical Determination of L‐Lactate Using Phenylboronic Acid Monolayer‐Modified Electrodes

The surface of a gold (Au) disk electrode was modified with a self‐assembled monomolecular layer of dithiobis(4‐butylamino‐m‐phenylboronic acid) (DTBA‐PBA) to prepare L ‐lactate‐sensitive electrodes. The DTBA‐PBA‐modified electrodes exhibited an attenuated cyclic voltammogram (CV) for the Fe(CN)₆^3? ion in the presence of L ‐lactate, as a result of the formation of phenylboronate ester of L ‐lactate accompanied with the addition of OH^? ion to the boron atom. In other words, the negatively charged DTBA‐PBA monolayer blocked the electrode surface from the access of the Fe(CN)₆^3?/4? ions. Thus, the DTBA‐PBA monolayer‐modified Au electrode can be used for determining L ‐lactate on the basis of the change in redox current of Fe(CN)₆^3?/4? ions. The calibration graph useful for determining 1–30 mM L ‐lactate was obtained.     

Synthesis of star‐shaped poly(D,L‐lactic acid‐alt‐glycolic acid)‐b‐poly(L‐lactic acid) with the poly(D,L‐lactic acid‐alt‐glycolic acid) macroinitiator and stannous octoate catalyst

Two types of three‐arm and four‐arm, star‐shaped poly(D,L ‐lactic acid‐alt‐glycolic acid)‐b‐poly(L ‐lactic acid) (D,L ‐PLGA50‐b‐PLLA) were successfully synthesized via the sequential ring‐opening polymerization of D,L ‐3‐methylglycolide (MG) and L ‐lactide (L ‐LA) with a multifunctional initiator, such as trimethylolpropane and pentaerythritol, and stannous octoate (SnOct₂) as a catalyst. Star‐shaped, hydroxy‐terminated poly(D,L ‐lactic acid‐alt‐glycolic acid) (D,L ‐PLGA50) obtained from the polymerization of MG was used as a macroinitiator to initiate the block polymerization of L ‐LA with the SnOct₂ catalyst in bulk at 130 °C. For the polymerization of L ‐LA with the three‐arm, star‐shaped D,L ‐PLGA50 macroinitiator (number‐average molecular weight = 6800) and the SnOct₂ catalyst, the molecular weight of the resulting D,L ‐PLGA50‐b‐PLLA polymer linearly increased from 12,600 to 27,400 with the increasing molar ratio (1:1 to 3:1) of L ‐LA to MG, and the molecular weight distribution was rather narrow (weight‐average molecular weight/number‐average molecular weight = 1.09–1.15). The ¹H NMR spectrum of the D,L ‐PLGA50‐b‐PLLA block copolymer showed that the molecular weight and unit composition of the block copolymer were controlled by the molar ratio of L ‐LA to the macroinitiator. The ¹³C NMR spectrum of the block copolymer clearly showed its diblock structures, that is, D,L ‐PLGA50 as the first block and poly(L ‐lactic acid) as the second block. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 409–415, 2002     

Synthesis of Alginate Oligosaccharides Containing L‐Guluronic Acids

Making ends meet : The L ‐gulopyranosyl trichloroacetimidate and 1,6‐anhydro‐2,3‐di‐O‐benzyl‐β‐L ‐gulopyranose, efficiently derived from L ‐ascorbic acid, were individually used as a starting unit and an elongation unit to prepare L ‐guluronic acid linked alginate oligosaccharides in excellent α selectivity and in good yields.

     

A Concise Approach to the Synthesis of L‐ and Z)‐Deoxyribose

D‐Deoxyribose, the basic structure unit of DNA, and its antipode L‐deoxyribose were concisely synthesized from easily available D‐ and L‐glyceralaldehydes using a known convenient diastereoselective propargylation as the key step.     

Efficient Synthesis of 1,2,3,4,6‐Penta‐O‐acetyl‐L‐idopyranose

An efficient synthesis of 1,2,3,4,6‐penta‐O‐acetyl‐L ‐idopyranose 2 from 3,5‐O‐benzylidene‐1,2‐O‐isopropylidene‐α‐D ‐glucofuranose in five steps in 45% overall yield via hydroboration of enol ether, hydrolysis of L ‐idofuranosyl sugar and acetolysis of 1,6‐anhydro‐β‐L ‐idopyranose as key steps is described here.     

Short and Sweet: D‐Glucose to L‐Glucose and L‐Glucuronic Acid

The scarcity and expense of access to L ‐sugars and other rare sugars have prevented the exploitation of their biological potential; for example D ‐psicose, only recently available, has been recognized as an important new food. Here we give the definitive and cheap synthesis of 99.4% pure L ‐glucose from D ‐glucose which requires purification of neither intermediates nor final product other than extraction into and removal of solvents; a simple crystallization will raise the purity to >99.8%.     

Hexacoordinate Silicon(IV) Complexes with SiO6 Skeletons and Multidentate Ligands Derived from Citric Acid or Malic Acid

Morpholinium meso‐bis[citrato(3‐)‐O¹, O³, O⁶]silicate (meso‐ 5 ) and racemic morpholinium bis[citrato(4‐)‐O¹, O³, O⁶]silicate (rac‐ 6 ) were synthesized by treatment of tetramethoxysilane with citric acid and morpholine (molar ratio 1:2:2 and 1:2:4, respectively). Treatment of tetramethoxysilane with (S)‐malic acid and tri(n‐propyl)amine or tri(n‐butyl)amine (molar ratio 1:3:2) yielded tri(n‐propyl)ammonium (Λ, S, S, S)‐mer‐tris[malato(2‐)‐O¹, O²]silicate ((Λ, S, S, S)‐mer‐ 7 ) and tri(n‐butyl)ammonium (Λ, S, S, S)‐mer‐tris[malato(2‐)‐O¹, O²]silicate ((Λ, S, S, S)‐mer‐ 8 ). The hexacoordinate silicon compounds meso‐ 5 ·2MeOH, rac‐ 6 ·1.73MeOH, (Λ, S, S, S)‐mer‐ 7 , and (Λ, S, S, S)‐mer‐ 8 ·2MeCN were structurally characterized in the solid state by single‐crystal X‐ray diffraction and VACP/MAS NMR spectroscopy (¹³C, ¹⁵N, ²⁹Si). Upon dissolution in water at 20 °C, spontaneous hydrolysis of the λ⁶Si‐silicate anions was observed.     

Structures and Properties of Three Solvent‐Dependent Chiral Compounds Based on N‐Benzoyl‐L‐glutamic Acid

Three solvent‐dependent chiral copper(II) compounds, {[Cu₂(bzgluO)₂(H₂O)₂]·4H₂O}_n ( 1 ), {[Cu₂(bzgluO)₂(DMSO)₂]·H₂O}_n ( 2 ) and [Cu₂(bzgluO)₂(DMF)₂]_n ( 3 ) (H₂bzgluO=N‐benzoyl‐L‐glutamic acid) have been synthesized under ambient temperature conditions and characterized by elemental analysis, IR spectra, UV spectra, thermogravimetric analysis, powder X‐ray diffraction (PXRD) and single‐crystal X‐ray diffraction. Compounds 1 and 2 both crystallize in the orthorhombic space group P2₁2₁2₁. Compound 3 crystallizes in the tetragonal space group P4₃. Compound 1 exhibits a ladder‐like 1D chain structure, which is extended by hydrogen‐bonding interactions to form a 3D supramolecular network. Compounds 2 and 3 both give a diamond‐like 3D structure. Besides, there are hydrogen‐bonding interactions in 2 . The structural difference indicates that the solvent system plays a crucial role in modulating structures of coordination compounds. Circular dichroism (CD) and the magnetic properties of the compounds have also been investigated.     

Synthesis of new hydrolyzable polyurethanes from L‐gulonic acid‐derived diols and diisocyanates

New polyurethanes with lactone groups in the pendants and main chains were synthesized by the polyaddition of two kinds of L ‐gulonolactone‐derived diols (2,3‐O‐isopropylidene‐L ‐gulono‐1,4‐lactone and 5,6‐O‐isopropylidene‐L ‐gulono‐1,4‐lactone) with hexamethylene diisocyanate and methyl (S)‐2,6‐diisocyanatohexanoate and by the subsequent deprotection of isopropylidene groups. They were hydrolyzed more quickly than the polyurethane derived from methyl β‐D ‐glucofuranosidurono‐6,3‐lactone in a phosphate buffer solution, the pH value of which was 8.0, at 27 °C. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4158–4166, 2002     

A Concise Total Synthesis of (+)‐(6S,9R,10R)‐Bovidic Acid

A straightforward strategy for the stereoselective synthesis of (+)‐bovidic acid has been developed in eleven steps with an overall yield of 8.85%. The synthesis started from commercially available nonanal, and the key reactions involved were Sharpless asymmetric dihydroxylation, Grignard reaction, and Corey? Bakshi? Shibata reduction.     

Total Synthesis of (+)‐Chinensiolide B from α‐Santonin

A short and efficient total synthesis of (+)‐chinensiolide B is reported, starting from commercially available α ‐santonin. This strategy could be used for rapid preparation of chinensiolides and their derivative for further structure activity relationship studies.