Direct Electrochemistry and Electrocatalysis of Hemoglobin–TiO2 Whisker Film Modified Glassy Carbon Electrode

In this study, Hb TiO₂ whisker nanocomposites are prepared by incorporating TiO₂ whisker with hemoglobin (Hb). Our studies illustrate that the self‐assembled Hb TiO₂ whisker films could efficiently facilitate the direct electron transfer of Hb on glassy carbon electrode (GCE). Moreover, our results demonstrate that the catalytic activity to the reduction of H₂O₂ could be observed on the Hb TiO₂ whisker modified GCE and the photovoltaic effect of TiO₂ whisker can greatly enhance the detection sensitivity of electrocatalytic reduction.     

Highly sensitive hydrogen peroxide sensor based on a glassy carbon electrode modified with platinum nanoparticles on carbon nanofiber heterostructures

We are presenting a sensor for hydrogen peroxide (H₂O₂) that is based on the use of a heterostructure composed of Pt nanoparticles (NPs) and carbon nanofibers (CNFs). High-density Pt NPs were homogeneously loaded onto a three-dimensional nanostructured CNF matrix and then deposited in a glassy carbon electrode (GCE). The resulting sensor synergizes the advantages of the conducting CNFs and the nanoparticle catalyst. The porous structure of the CNFs also favor the high-density immobilization of the NPs and the diffusion of water-soluble molecules, and thus assists the rapid catalytic oxidation of H₂O₂. If operated at a working voltage of −0.2 V (vs. Ag/AgCl), the modified GCE exhibits a linear response to H₂O₂ in the 5 μM to 15 mM concentration range (total analytical range: 5 μM to 100 mM), with a detection limit of 1.7 μM (at a signal-to-noise ratio of 3). The modified GCE is not interfered by species such as uric acid and glucose. Its good stability, high selectivity and good reproducibility make this electrode a valuable tool for inexpensive amperometric sensing of H₂O₂.

The Pt NPs/CNF heterostructure-based H₂O₂ sensor synergizes the advantages of both the conducting carbon nanofibers and the nanoparticle catalyst. The 3D structure of the nanofibers favor high density immobilization of the nanoparticles and penetration by water-soluble molecules, which assists the catalyic oxidation of H₂O₂. The sensor shows outstanding performance in terms of detection range, detection limit, response time, stability and selectivity.

     

Porphyrin Nanorods Modified Glassy Carbon Electrode for the Electrocatalysis of Dioxygen,Methanol and Hydrazine

Porphyrin nanorods (PNR) were prepared by ionic self‐assembly of two oppositely charged porphyrin molecules consisting of free base meso‐tetraphenylsulfonate porphyrin (H₄TPPS₄^2?) and meso‐tetra(N‐methyl‐4‐pyridyl) porphyrin (MTMePyP⁴⁺M=Sn, Mn, In, Co). These consist of H₄TPPS₄^2?? SnTMePyP⁴⁺, H₄TPPS₄^2?? CoTMePyP⁴⁺, H₄TPPS₄^2?? InTMePyP⁴⁺ and H₄TPPS₄^2?? MnTMePyP⁴⁺ porphyrin nanorods. The absorption spectra and transmission electron microscopic (TEM) images of these structures were obtained. These porphyrin nanostructures were used to modify a glassy carbon electrode for the electrocatalytic reduction of oxygen, and the oxidation of hydrazine and methanol at low pH. The cyclic voltammogram of PNR‐modified GCE in pH 2 buffer solution has five irreversible processes, two distinct reduction processes and three oxidation processes. The porphyrin nanorods modified GCE produce good responses especially towards oxygen reduction at ?0.50 V vs. Ag|AgCl (3 M KCl). The process of electrocatalytic oxidation of methanol using PNR‐modified GCE begins at 0.71 V vs. Ag|AgCl (3 M KCl). The electrochemical oxidation of hydrazine began at around 0.36 V on H₄TPPS₄^2?? SnTMePyP⁴⁺ modified GCE. The GCE modified with H₄TPPS₄^2?? CoTMePyP⁴⁺ H₄TPPS₄^2?? InTMePyP⁴⁺ and H₄TPPS₄^2?? MnTMePyP⁴⁺ porphyrin nanorods began oxidizing hydrazine at 0.54 V, 0.59 V and 0.56 V, respectively.     

Direct Electrochemistry and Electrocatalysis of Hemoglobin in Lipid Film Incorporated with Room‐Temperature Ionic Liquid

A facile phospholipid/room‐temperature ionic liquid (RTIL) composite material based on dimyristoylphosphatidylcholine (DMPC) and 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([bmim]PF₆) was exploited as a new matrix for immobilizing protein. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were adopted to characterize this composite film. Hemoglobin (Hb) was chosen as a model protein to investigate the composite system. UV‐vis absorbance spectra showed that Hb still maintained its heme crevice integrity in this composite film. By virtue of the Hb/DMPC/[bmim]PF₆ composite film‐modified glassy carbon electrode (GCE), a pair of well‐defined redox peaks of Hb was obtained through the direct electron transfer between protein and underlying GCE. Moreover, the reduction of O₂ and H₂O₂ at the Hb/DMPC/[bmim]PF₆ composite film‐modified GCE was dramatically enhanced.     

对苯二胺在血红蛋白/聚L-谷氨酸/玻碳修饰电极上的可逆氧化

采用电聚合法在玻碳电极(GCE)表面得到导电性能良好的聚L-谷氨酸(PGA)薄膜,通过共价键合法将血红蛋白(Hb)固定于电极表面得到稳定且具有催化活性的Hb/PGA/GCE修饰电极,将其用于对苯二胺(PPD)的可逆氧化。 修饰电极交流阻抗及血红蛋白直接电化学实验表明,血红蛋白成功地固定于电极表面,保持良好的电催化活性,能有效催化H₂O₂的还原。 PPD在电极上表现为受吸附控制的准可逆氧化还原反应,I_p,a/I_p,c约为1.02,电极没有明显的钝化现象。 氧化还原峰电流与PPD的浓度均呈良好的线性关系,I_p,a(μA)=3.124+0.705c_PPD(mmol/L)(r=0.9973)。 H₂O₂的存在使PPD氧化还原峰型更对称,可逆性更好,表明体系中PPD氧化与过氧化酶催化途径一致。     

Electrocatalysis of Hemoglobin in ZnO Nanoparticle/Ionic Liquid Composite Film Modified Glassy Carbon Electrode

A nanobiocompatible composite containing hemoglobin (Hb), ZnO nanoparticles (nano‐ZnO) and ionic liquid 1‐butyl‐3‐methylimidazolium hexafluorophosphate (BMIMPF₆) was fabricated and further modified on the glassy carbon electrode (GCE). The electrochemical behaviours of Hb in the composite film were carefully studied and a pair of quasi‐reversible redox peaks appeared in pH 7.0 phosphate buffer solution, which was attributed to the electrode reaction of Hb heme Fe(III)/Fe(II) redox couple. The presences of nano‐ZnO and BMIMPF₆ in the film can retain the bioactivity of Hb and greatly enhance the direct electron transfer of Hb. The immobilized Hb showed high stability and good electrocatalytic ability to the reduction of hydrogen peroxide and O₂.     

Palladium Nanoparticles Embedded into Graphene Nanosheets: Preparation,Characterization, and Nonenzymatic Electrochemical Detection of H2O2

A novel nonenzymatic H₂O₂ sensor based on a palladium nanoparticles/graphene (Pd‐NPs/GN) hybrid nanostructures composite film modified glassy carbon electrode (GCE) was reported. The composites of graphene (GN) decorated with Pd nanoparticles have been prepared by simultaneously reducing graphite oxide (GO) and K₂PdCl₄ in one pot. The Pd‐NPs were intended to enlarge the interplanar spacing of graphene nanosheets and were well dispersed on the surface or completely embedded into few‐layer GN, which maintain their high surface area and prevent GN from aggregating. XPS analysis indicated that the surface Pd atoms are negatively charged, favoring the reduction process of H₂O₂. Moreover, the Pd‐NPs/GN/GCE could remarkably decrease the overpotential and enhance the electron‐transfer rate due to the good contact between Pd‐NPs and GN sheets, and Pd‐NPs have high catalytical effect for H₂O₂ reduction. Amperometric measurements allow observation of the electrochemical reduction of H₂O₂ at 0.5 V (vs. Ag/AgCl). The H₂O₂ reduction current is linear to its concentration in the range from 1×10^?9 to 2×10^?3 M, and the detection limit was found to be 2×10^?10 M (S/N=3). The as‐prepared nonenzymatic H₂O₂ sensor exhibits excellent repeatability, selectivity and long‐term stability.     

Direct Electrochemistry of Hemoglobin and its Electrocatalysis Based on a Carbon Nanotube Paste Electrode

A new hemoglobin (Hb) and carbon nanotube (CNT) modified carbon paste electrode was fabricated by simply mixing the Hb, CNT with carbon powder and liquid paraffin homogeneously. To prevent the leakage of Hb from the electrode surface, a Nafion film was further applied on the surface of the Hb‐CNT composite paste electrode. The modified electrode was characterized by scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS). Direct electrochemistry of hemoglobin in this paste electrode was easily achieved and a pair of well‐defined quasi‐reversible redox peaks of a heme Fe(III)/Fe(II) couple appeared with a formal potential (E^0′) of ?0.441 V (vs. SCE) in pH 7.0 phosphate buffer solution (PBS). The electrochemical behaviors of Hb in the composite electrode were carefully studied. The fabricated modified bioelectrode showed good electrocatalytic ability for reduction of H₂O₂ and trichloroacetic acid (TCA), which shows potential applications in third generation biosensors.     

金复合介孔SBA-15吸附血红蛋白在H2O2电催化反应中的应用

以P123嵌段共聚物表面活性剂为模板剂制备介孔氧化硅SBA-15,并用沉积-沉淀(DP)法在SBA-15介孔表面负载纳米Au颗粒制备得到金复合介孔SBA-15材料(Au-SBA-15).再以Au-SBA-15材料制备玻碳修饰电极,将血红蛋白固定于修饰电极上用循环伏安法考察其对不同浓度H2O2溶液的电催化反应.在固定了血红蛋白的Hb/Au-SBA-15/GC修饰电极上,H2O2在+0.95 V处出现了氧化峰,且随着H2O2浓度的增大峰电流不断增加,说明金复合介孔氧化硅材料具有良好的生物兼容性,有利于血红蛋白的固定,其修饰电极对H2O2溶液具有一定的电催化作用.     

Electrogenerated chemiluminescence and electrochemical bi-functional sensors for H2O2 based on CdS nanocrystals/hemoglobin multilayers

A novel bi-functional sensor, based on CdS nanocrystals (NCs) and hemoglobin (Hb) multilayer films, designated as {Hb/CdS}_n, modified glassy carbon electrode (GCE) by layer-by-layer (LbL) assembly, has been presented. The electrogenerated chemiluminescence (ECL) and electrochemical properties of {Hb/CdS}_n have been investigated in detail. Hb in the multilayer films can enhance the stability of electrogenerated species of CdS NCs, and CdS NCs can also promote the direct electron transfer between Hb and GCE. As a consequence experimentally, the multilayer films modified GCE is suitable to be used as a bi-functional sensor, ECL sensor and electrochemical sensor, to determine H₂O₂ in obviously different concentration. In high concentration of H₂O₂, this sensor as an ECL sensor shows a linear response from 15 μM up to 18 mM. In the lower concentration of H₂O₂, it as an amperometric one shows two linear ranges of amperometric responses to the concentration of H₂O₂ ranging from 6.0 to 31.0 μM and from 6.0 μM down to 40 nM with a detection limit of 20 nM, based on the high stability of ECL by {Hb/CdS}_n and the excellent electrocatalytical ability of Hb to H₂O₂. Thus, {CdS/Hb}_n modified electrodes would have a great merit to expand the application of biosensors to life science and environmental science.     

Electrochemical Detection of Hydrazine Based on Electrospun Palladium Nanoparticle/Carbon Nanofibers

In this work, we developed an electrochemical method for the detection of hydrazine based on palladium nanoparticle/carbon nanofibers (Pd/CNFs). Pd/CNFs were prepared by electrospinning technique and subsequent thermal treatments. The electrocatalytic behaviors of Pd/CNFs modified glassy carbon electrode (Pd/CNF‐GCE) for hydrazine oxidation were evaluated by cyclic voltammetry (CV), an obvious and well‐defined oxidation peak appeared at ?0.32 V (vs. Ag/AgCl). The mechanism of the oxidation of hydrazine at Pd/CNF‐GCE was also studied, which demonstrated an irreversible diffusion‐controlled electrode process and a four‐electron transfer involved in the overall reaction. Furthermore, the wide linear range, low detection limit, good reproducibility and excellent storage stability were obtained utilizing differential pulse voltammetry (DPV).     

Carboxyphenyl Covalent Immobilization of Heme Proteins and its Favorable Biocompatible Electrochemical and Electrocatalytic Characteristics

A novel carboxyphenyl covalent immobilization technique has been successfully developed to realize the effective attachment of two typical heme proteins, hemoglobin (Hb) and cytochrome c (Cyt‐c), onto underlying glassy carbon electrode (GCE). Primarily, the GCE surface is functionalized with aromatic 4‐carboxyphenyl (4‐CP) group by the electrochemical reduction of diazonium cations, producing covalently linked carboxyl‐terminated active GCE surface to work as a ‘bridge’. Then, Hb and Cyt‐c are readily attached to GCE through the ‘bridge’ by functional covalently combination between ? NH₂ terminal groups of proteins and ? COOH terminal groups of 4‐CP, obtaining Hb/4‐CP/GCE and Cyt‐c/4‐CP/GCE. On both electrodes, well‐defined peaks attributing to the Fe^III/Fe^II couple of heme group of Hb and Cyt‐c are clearly observed with the electron transfer rate constant (k_s) evaluated to be 2.48±0.05 s^?1 and 2.73±0.05 s^?1, respectively. It is attractive that the formal potential (E°') of the immobilized Hb and Cyt‐c are estimated to be 50 and 100 mV (vs. SCE), respectively, which are closer to the standard redox potential of native Hb and Cyt‐c in solution, owing to the good biocompatibility of 4‐CP groups. The electrodes also exhibit fast response, high sensitivity and well stability for the amperometric detection of H₂O₂ at a fairly mild potential of 0 V without any mediators, obtaining rather small apparent Michaelis‐Menten constant (K_M^app) values of 113 μM for Hb/4‐CP/GCE and 101 μM for Cyt‐c/4‐CP/GCE. All the experimental results indicated that the covalent graft 4‐carboxyphenyl group plays an important role in constructing a “biocompatible bridge” to help the direct electron transfer of Hb and Cyt‐c with favorable biocompatibility and good bio‐ electrocatalytic affinity in virtue of the substituted aryl group only consisting of C, H and O elements, which is similar with the constitutes of organics. It makes the system of functionalized covalent immobilization of proteins onto carbon electrode a promising platform for fabricating the third‐generation biosensors. A new approach for realizing direct electrochemistry of proteins, as well as design of novel bioelectronic devices has been accordingly provided.     

基于血红蛋白/硒化镉量子点多层膜的H2O2生物传感器

合成了水溶性硒化镉(CdSe)量子点,利用组装技术和静电吸附作用,将带正电荷的血红蛋白(Hb)和带负电荷的CdSe量子点层层组装到壳聚糖(chit)修饰的玻碳电极(GCE)表面,构建基于{Hb/CdSe}n多层膜的无电子媒介体的电流型生物传感器({Hb/CdSe}3/chit/GCE).运用紫外-可见吸收光谱、电致化学发光、交流阻抗和循环伏安技术来表征修饰膜,并研究传感器的作用机理、性能及分析应用.结果表明:与量子点薄膜法及量子点/血红蛋白复合物法等固载血红蛋白的其他方法相比,层层组装法能显著提高血红蛋白的固定量,保持血红蛋白的生物活性,增强传感器的灵敏度和稳定性.传感器检测H2O2的线性范围为4.0×10-8～4.8×10-6 mol·L-1(r=0.999 1),检测限为2.0×10-8mol·L-l.多层膜的电致化学发光研究,表明修饰电极有望用于电致化学发光传感器的制备.     

Electrochemistry and Electrocatalysis of a Nafion/Nano‐CaCO3/Hb Film Modified Carbon Ionic Liquid Electrode Using BMIMPF6 as Binder

In this paper a room temperature ionic liquid 1‐butyl‐3‐methylimidazolium hexafluorophosphate (BMIMPF₆) was used as binder for the construction of carbon ionic liquid electrode (CILE) and a new electrochemical biosensor was developed for determination of H₂O₂ by immobilization of hemoglobin (Hb) in the composite film of Nafion/nano‐CaCO₃ on the surface of CILE. The Hb modified electrode showed a pair of well‐defined, quasi‐reversible redox peaks with E_pa and E_pc as ?0.265 V and ?0.470 V (vs. SCE). The formal potential (E°′) was got by the midpoint of E_pa and E_pc as ?0.368 V, which was the characteristic of Hb Fe(III)/Fe(II) redox couples. The peak to peak separation was 205 mV in pH 7.0 Britton–Robinson (B–R) buffer solution at the scan rate of 100 mV/s. The direct electrochemistry of Hb in the film was carefully investigated and the electrochemical parameters of Hb on the modified electrode were calculated as α=0.487 and k_s=0.128 s^?1. The Nafion/nano‐CaCO₃/Hb film electrode showed good electrocatalysis to the reduction of H₂O₂ in the linear range from 8.0 to 240.0 μmol/L and the detection limit as 5.0 μmol/L (3σ). The apparent Michaelis–Menten constant (K_M^app) was estimated to be 65.7 μmol/L. UV‐vis absorption spectroscopy and FT‐IR spectroscopy showed that Hb in the Nafion/nano‐CaCO₃ composite film could retain its native structure.     

Functionalization of graphene with electrodeposited Prussian blue towards amperometric sensing application

Prussian blue (PB) was grown compactly on graphene matrix by electrochemical deposition. The as-prepared PB-graphene modified glassy carbon electrode (PB-graphene/GCE) showed excellent electrocatalytic activity towards both the reduction of hydrogen peroxide and the oxidation of hydrazine, which could be attributed to the remarkable synergistic effect of graphene and PB. The PB-graphene/GCE showed sensitive response to H₂O₂ with a wide linear range of 10-1440 μM at 0.0 V, and to hydrazine with a wide linear range of 10-3000 μM at 0.35 V. The detection limit was 3 μM and 7 μM, respectively, and both of them had rapid response within 5 s to reach 95% steady state response. The wide linear range, good selectivity and long-time stability of the PB-graphene/GCE make it possible for the practical amperometric detection of hydrogen peroxide and hydrazine.     

Prussian Blue electrodeposited on MWNTs-PANI hybrid composites for H2O2 detection

A Prussian Blue (PB)/polyaniline (PANI)/multi-walled carbon nanotubes (MWNTs) composite film was fabricated by step-by-step electrodeposition on glassy carbon electrode (GCE). The electrode prepared exhibits enhanced electrocatalytic behavior and good stability for detection of H₂O₂ at an applied potential of 0.0 V. The effects of MWNTs thickness, electrodeposition time of PANI and rotating rate on the current response of the composite modified electrode toward H₂O₂ were optimized to obtain the maximal sensitivity. A linear range from 8 × 10⁻⁹ to 5 × 10⁻⁶ M for H₂O₂ detection has been observed at the PB/PANI/MWNTs modified GCE with a correlation coefficient of 0.997. The detection limit is 5 × 10⁻⁹ M on signal-to-noise ratio of 3. To the best of our knowledge, this is the lowest detection limit for H₂O₂ detection. The electrode also shows high sensitivity (526.43 μA μM⁻¹ cm⁻²) for H₂O₂ detection which is more than three orders of magnitude higher than the reported.     

Gold Nanoparticles-electrochemically Reduced Graphene Oxide/Poly(indole-5-carboxylic acid) Nanocomposite for Electrochemical Non-enzymatic Sensing of Hydrogen Peroxide

Herein, co-electrodeposition of AuNPs and ERGO onto GCE was conducted to prepare the modified electrode, GCE/AuNPs-ERGO. The poly(indole-5-carboxylic acid) (P(In-5-COOH) was then coated onto the GCE/AuNPs-ERGO with the help of electropolymerization. FT-IR, FE-SEM and EDX, and XRD techniques were employed to characterize the prepared nanocomposite. The nanocomposite modified electrode (GCE/AuNPs-ERGO/P(In-5-COOH)) was examined for the electrochemical reduction of H₂O₂ using chronoamperometry. A high reduction current for H₂O₂ was observed due to the synergistic effect between AuNPs-ERGO and P(In-5-COOH). The proposed sensor demonstrated a wide linear range of 0.025–750 μmol L⁻¹, with a LOD of 0.008 μmol L⁻¹ at −0.4 V. Furthermore, the developed sensor was applied for the detection of H₂O₂ in fetal bovine serum and urine samples.     

Functionalization of Single‐Walled Carbon Nanotubes with Cubic Prussian Blue and Its Application for Amperometric Sensing

In this work, we synthesized electroactive cubic Prussian blue (PB) modified single‐walled carbon nanotubes (SWNTs) nanocomposites using the mixture solution of ferric‐(III) chloride and potassium ferricyanide under ambient conditions. The successful fabrication of the PB‐SWNTs nanocomposites was confirmed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV‐vis absorption spectroscopy, Fourier transform infrared (FTIR) spectroscopy, and cyclic voltammetry (CV). PB nanocrystallites are observed to be finely attached on the SWNTs sidewalls in which the SWNTs not only act as a carrier of PB nanocrystallites but also as Fe(III)‐reducer. The electrochemical properties of PB‐SWNTs nanocomposites were also investigated. Using the electrodeposition technique, a thin film of PB‐SWNTs/chitosan nanocomposites was prepared onto glassy carbon electrode (GCE) for the construction of a H₂O₂ sensor. PB‐SWNTs/chitosan nanocomposites film shows enhanced electrocatalytic activity towards the reduction of H₂O₂ and the amperometric responses show a linear dependence on the concentration of H₂O₂ in a range of 0.5–27.5 mM and a low detection limit of 10 nM at the signal‐to‐noise ratio of 3. The time required to reach the 95% steady state response was less than 2 s. CV studies demonstrate that the modified electrode has outstanding stability. In addition, a glucose biosensor is further developed through the simple one‐step electrodeposition method. The observed wide concentration range, high stability and high reproducibility of the PB‐SWNTs/chitosan nanocomposites film make them promising for the reliable and durable detection of H₂O₂ and glucose.     

Direct electrochemistry and electrocatalysis of hemoglobin in gelatine film modified glassy carbon electrode

Direct electrochemical and electrocatalytic behavior of hemoglobin (Hb) immobilized on glass carbon electrode (GCE) containing gelatine (Gel) films was investigated. The characteristics of Hb/Gel film modified GC electrode were performed by using SEM microscopy, UV-vis spectroscopy and electrochemical methods. The immobilized Hb showed a couple of quasi-reversible redox peak with a formal potential of −0.38 V (versus SCE) in 0.1 M pH 7.0 PBS. The formal potential changed linearly from pH 4.03 to 8.41 with a slope value of −52.0 mV pH⁻¹, which suggested that a proton transfer was accompanied with each electron transfer (ET) in the electrochemical reaction. The Hb/gelatine/GCE displayed a rapid amperometric response to the reduction of H₂O₂ and nitrite.     

Hemoglobin Modified Carbon Paste Electrode: Direct Electrochemistry and Electrocatalysis

Abstract

A new hemoglobin (Hb) modified carbon paste (CP) electrode was fabricated by simply mixing the hemoglobin with carbon powder and paraffin homogeneously. To prevent the leakage of Hb from the electrode surface, a Nafion film was further applied on the surface of Hb-carbon composite paste electrode. Direct electrochemistry of hemoglobin in the paste electrode was easily achieved, and a pair of well-defined quasi-reversible redox peak of heme Fe(III)/Fe(II) couple appeared with the formal potential (E^0′) as ?0.335 V (vs. Saturated calomel electrode; CE) in pH 7.0 phosphate buffer solution (PBS). The fabricated Hb modified electrode showed good electrocatalytic ability to the reduction of trichloroacetic acid (TCA) and H₂O₂.