On flow of a fourth‐grade fluid with heat transfer

The influence of heat transfer on the steady flow of a fourth‐grade fluid between two stationary parallel porous plates is studied. The flow is engendered under the application of a constant pressure gradient. The concept of homotopy analysis method is utilized for the series solution of the governing problem. Numerical solution has been also carried out. In addition, both analytic and numerical solutions are compared. The variations of embedded parameters into the solution are predicted through the graphical representations. Copyright © 2010 John Wiley & Sons, Ltd.     

MHD squeezing flow of second‐grade fluid between two parallel disks

This paper examines the unsteady two‐dimensional flow of a second‐grade fluid between parallel disks in the presence of an applied magnetic field. The continuity and momentum equations governing the unsteady two‐dimensional flow of a second‐grade fluid are reduced to a single differential equation through similarity transformations. The resulting differential system is computed by a homotopy analysis method. Graphical results are discussed for both suction and blowing cases. In addition, the derived results are compared with the homotopy perturbation solution in a viscous fluid (Math. Probl. Eng., DOI: 10.1155/2009/603916 ). Copyright © 2011 John Wiley & Sons, Ltd.     

Effect of heat transfer on a third grade fluid in a flat channel

The heat transfer analysis on the laminar flow of an incompressible third grade fluid through a porous flat channel is examined. The lower plate is assumed to be at a higher temperature than the upper plate. Analytical solution for temperature distribution is obtained for various values of the controlling parameters and discussed. The obtained analytical solution is also compared with the numerical solution. The comparison shows the fact that the accuracy is remarkable. Copyright © 2009 John Wiley & Sons, Ltd.     

Heat transfer on peristaltic flow of fourth grade fluid in inclined asymmetric channel with partial slip

In this paper, the effects of slip and heat transfer are studied on the peristaltic transport of a magnetohydrodynamic (MHD) fourth grade fluid. The governing equations are modeled and solved under the long wavelength approximation by using a regular perturbation method. Explicit expressions of solutions for the stream function, the velocity, the pressure gradient, the temperature, and the heat transfer coefficient are presented. Pumping and trapping phenomena are analyzed for increasing the slip parameter. Further, the temperature profiles and the heat transfer coefficient are observed for various increasing parameters. It is found that these parameters considerably affect the considered flow characteristics. Comparisons with published results for the no-slip case are found in close agreement.     

Three-dimensional channel flow of second grade fluid in rotating frame

An analysis is performed for the hydromagnetic second grade fluid flow between two horizontal plates in a rotating system in the presence of a magnetic field.The lower sheet is considered to be a stret...     

Flow and heat transfer in a second grade fluid over a stretching sheet

An analysis is carried out to study the flow and heat transfer characteristics in a second grade fluid over a stretching sheet with prescribed surface temperature including the effects of frictional heating, internal heat generation or absorption, and work due to deformation. In order to solve the fourth-order non-linear differential equation, associated with the flow problem, a fourth boundary condition is augmented and a proper sign for the normal stress modulus is used. It is observed that for a physical flow problem the solution is unique. The solutions for the temperature and the heat transfer characteristics are obtained numerically and presented by a table and graphs. Furthermore, it is shown that the heat flow is always from the stretching sheet to the fluid.     

Simultaneous effects of induced magnetic field and heat and mass transfer on the peristaltic motion of second‐order fluid in a channel

In this article, we investigate the influence of heat and mass transfer on the peristaltic flow of magnetohydrodynamic second‐order fluid in a channel when the induced magnetic field effects are present. Problem formulation in a wave frame of reference is presented. The governing nonlinear analysis is carried out under the assumption of small wave number. Explicit expressions of the pressure gradient, the stream function, the magnetic force function, the axial induced magnetic field, the current density distribution, the temperature, and the concentration distribution are derived. The effects of embedded parameters are also examined. Copyright © 2011 John Wiley & Sons, Ltd.     

MHD axisymmetric flow of third grade fluid between porous disks with heat transfer

The magnetohydrodynamic(MHD) flow of the third grade fluid between two permeable disks with heat transfer is investigated.The governing partial differential equations are converted into the ordinary differential equations by suitable transformations.The transformed equations are solved by the homotopy analysis method(HAM).The expressions for square residual errors are defined,and the optimal values of convergencecontrol parameters are selected.The dimensionless velocity and temperature fields are examined for various dimensionless parameters.The skin friction coefficient and the Nusselt number are tabulated to analyze the effects of dimensionless parameters.     

Unsteady hydromagnetic flow of a reactive variable viscosity third‐grade fluid in a channel with convective cooling

This paper examines the combined effects of a transverse magnetic field and variable viscosity on unsteady flow of a reactive third‐grade electrically conducting fluid and heat transfer in a channel with convective cooling at the surface. It is assumed that the fluid has small electrical conductivity and the electromagnetic force produced is very small. The coupled nonlinear partial differential equations governing the problem are derived and solved numerically using a semi‐implicit finite‐difference scheme. Both numerical and graphical results are presented and physical aspects of the problem are discussed with respect to various parameters embedded in the system. It is in general noted that those parameters that increase/decrase one flow quantity (velocity or temperature) also lead to the increase/decrease respectively of the other quantity. Copyright © 2011 John Wiley & Sons, Ltd.     

A note on flow and heat transfer of a viscoelastic fluid over a stretching sheet

This paper presents a study of the flow and heat transfer of an incompressible homogeneous second grade fluid past a stretching sheet. The governing partial differential equations are converted into ordinary differential equations by a similarity transformation. The effects of viscous dissipation and work due to deformation are considered in the energy equation and the variations of dimensionless surface temperature and dimensionless surface temperature gradient with various parameters are graphed and tabulated. Two cases are studied, namely, (i) the sheet with constant surface temperature (CST case) and (ii) the sheet with prescribed surface temperature (PST case).     

Magnetohydrodynamic peristaltic flow of a hyperbolic tangent fluid in a vertical asymmetric channel with heat transfer

In the present paper we discuss the magnetohydrodynamic (MHD) peristaltic flow of a hyperbolic tangent fluid model in a vertical asymmetric channel under a zero Reynolds number and long wavelength approximation. Exact solution of the temperature equation in the absence of dissipation term has been computed and the analytical ex- pression for stream function and axial pressure gradient are established. The flow is analyzed in a wave frame of reference moving with the velocity of wave. The expression for pressure rise has been computed numerically. The physical features of pertinent parameters are analyzed by plotting graphs and discussed in detail.     

Effects of slip,viscous dissipation and Joule heating on the MHD flow and heat transfer of a second grade fluid past a radially stretching sheet

The flow and heat transfer of an electrically conducting non-Newtonian second grade fluid due to a radially stretching surface with partial slip is considered. The partial slip is controlled by a dimensionless slip factor, which varies between zero （total adhesion） and infinity （full slip）. Suitable similarity transformations are used to reduce the resulting highly nonlinear partial differential equations into ordinary differential equations. The issue of paucity of boundary conditions is addressed and an effective numerical scheme is adopted to solve the obtained differential equations even without augmenting any extra boundary conditions. The important findings in this communication are the combined effects of the partial slip, magnetic interaction parameter and the second grade fluid parameter on the velocity and temperature fields. It is interesting to find that the slip increases the momentum and thermal boundary layer thickness. As the slip increases in magnitude, permitting more fluid to slip past the sheet, the skin friction coefficient decreases in magnitude and approaches zero for higher values of the slip parameter, i.e., the fluid behaves as though it were inviscid. The presence of a magnetic field has also substantial effects on velocity and temperature fields.     

Melting heat transfer in the stagnation‐point flow of an upper‐convected Maxwell (UCM) fluid past a stretching sheet

The steady laminar boundary layer flow and heat transfer past a stretching sheet arre considered. Upper‐convected Maxwell (UCM) fluid is treated as a rheological model. The resulting nonlinear differential system is solved by homotopy analysis method (HAM). The influence of melting parameter (M), Prandtl number (Pr), Deborah number (β) and stretching ratio (A = a/c) on the velocity and temperature profiles is thoroughly examined. It is noticed that fields are effected appreciably with the variation of parameters. Furthermore, it is seen that the local Nusselt number is a decreasing function of melting parameter. Copyright © 2011 John Wiley & Sons, Ltd.     

Effects of heat and mass transfer on peristaltic flow of Williamson fluid in a non‐uniform channel with slip conditions

The combined influence of heat and mass transfer has been explored in a study of peristaltic transport of magnetohydrodynamic Williamson fluid in a non‐uniform channel with flexible walls. The slip conditions are paid due attention and long wavelength and small Reynolds number assumptions are adopted in the problem formulation. The obtained results are valid for small Weissenberg number. A detailed study of involved key parameters in the obtained solutions is made by the sketched graphs. Copyright © 2010 John Wiley & Sons, Ltd.     

MHD flow and heat transfer from continuous surface in uniform free stream of non-Newtonian fluid

An analysis is carried out to study the steady flow and heat transfer charac- teristics from a continuous flat surface moving in a parallel free stream of an electrically conducting non-Newtonian viscoelastic fluid.The flow is subjected to a transverse uni- form magnetic field.The constitutive equation of the fluid is modeled by that for a second grade fluid.Numerical results are obtained for the distribution of velocity and temperature profiles.The effects of various physical parameters like viscoelastic param- eter,magnetic parameter and Prandtl number on various momentum and heat transfer characteristics are discussed in detail and shown graphically.     

Analysing flow and heat transfer of a viscoelastic fluid over a semi-infinite horizontal moving flat plate

This paper presents a numerical study of the flow and heat transfer of an incompressible homogeneous second grade type fluid above a flat plate moving with constant velocity U. Such a viscoelastic fluid is at rest and the motion is created by the sheet. The effects of the non-Newtonian nature of the fluid are governed by the local Deborah number K (the ratio between the relaxation time of the fluid and the characteristic time of the flow). When , a new analytical solution for this flow is presented and the effects of fluid's elasticity on flow characteristics, dimensionless stream function and its derivatives are analysed in a wide domain of K. A novel result of the analysis is that a change in the flow solution's behaviour occurs when the dimensionless stream function at the edge of the boundary layer, f_∞, equals 1.0. It is found that velocity at a point decreases with increase in the elasticity of the fluid and, as expected, the amount of fluid entrained diminishes when the effects of fluid's elasticity are augmented. In our heat transfer analyses we assume that the surface temperature has a power-law variation. Two cases are studied, namely, (i) the sheet with prescribed surface temperature (PST case) and (ii) the sheet with prescribed heat flux (PHF case). Local similarity heat-transfer solutions are given for PST case when s=2 (the wall temperature parameter) whereas when a similarity solution takes place in the case of prescribed wall heat flux. The numerical results obtained are fairly in good agreement with the aforementioned analytical ones.     

Wall properties and heat transfer analysis of the peristaltic motion in a power‐law fluid

A mathematical analysis has been carried out to investigate the effect of elasticity of the flexible walls on the peristaltic flow of a power‐law fluid. The heat transfer analysis is further examined. Expressions of stream function, velocity, and temperature distributions are presented in closed form under long wavelength and low Reynolds number approximations. The effects of the various parameters entering into the mathematical analysis are sketched and discussed. Copyright © 2012 John Wiley & Sons, Ltd.     

Solving viscoelastic free surface flows of a second‐order fluid using a marker‐and‐cell approach

This work is concerned with the numerical simulation of two‐dimensional viscoelastic free surface flows of a second‐order fluid. The governing equations are solved by a finite difference technique based on the marker‐and‐cell philosophy. A staggered grid is employed and marker particles are used to represent the fluid free surface. Full details for the approximation of the free surface stress conditions are given. The resultant code is validated and convergence is demonstrated. Numerical simulations of the extrudate swell and flow through a planar 4:1 contraction for various values of the Deborah number are presented. Copyright © 2006 John Wiley & Sons, Ltd.     

Hybrid nanomaterial flow and heat transport in a stretchable convergent/divergent channel:a Darcy-Forchheimer model

The flow behavior in non-parallel walls is an important factor of any physical model including cavity flow and canals, which is applicable for diverging/converging channel. The present communication explains that the flow of the hybrid nanomaterial subjected to the convergent/divergent channel has non-parallel walls. It is assumed that the hybrid nanomaterial movement is in the porous region. A Darcy-Forchheimer medium of porosity is considered to interpret the porosity features. A useful simila...     

Simulation of heat and mass transfer on peristaltic flow of hyperbolic tangent fluid in an asymmetric channel

In the present analysis, the influence of heat and mass transfer on the peristaltic flow of a hyperbolic tangent fluid in an asymmetric channel has been discussed. The highly nonlinear equations are simplified under lubrication approach. The perturbation and numerical solutions of the problem are not only discussed but the validity of the results is also being checked. The graphical results of the problem under discussion are also being brought under consideration to see the behavior of various physical parameters. Copyright © 2012 John Wiley & Sons, Ltd.