Si2CN分子结构的理论研究

在B3LYP／6－311G（d）水平上对Si2CN的各种可能异构体进行了研究，得到了其几何构型，结果表明：Si2CN有11个稳定的异构体，能量最低的是直线型异构体SiCNSi1,其次是四元环构型具有SiC桥键，电子态为^2A″的cSiSiCN6，第三稳定的是具有CSiSi三元环和环外NC键的N－cCSiSi10^2A1，第四稳定的是四元环具有SiN桥键^2A″电子态异构体cSiSiCN7。     

NC2S+离子的结构和稳定性的理论研究

在密度泛函和从头算理论水平下计算了单重态的NC2S+离子的结构、能量、光谱以及稳定性. 在B3LYP/6-311G(d)水平下, 得到8个异构体, 它们由15个过渡态相连接. 在CCSD(T)/6-311+G(2df)//QCISD/6-311G(d)+ZPVE水平下, 得到能量最低的异构体是直线型的具有1Σ电子态的NCCS+(1)(0.0 kJ/mol), 其次是直线型的异构体CNCS+(2)(54.8 kJ/mol). 两个低能量的异构体1和2及另外一个高能量的直线型异构体CCNS+(3)(323.8 kJ/mol)都具有相当大的动力学稳定性, 这三个异构体在具备一定条件的实验室和星际条件下是可以进行观测的. 分析了这3个异构体的成键性质.     

Al2F2分子结构与稳定性的ab initio计算研究

用abinitio方法在UMP2/6-311G(d)水平下计算了Al2F2分子可能的异构体构型和AlF二聚化成Al2F2分子的反应能。UMP2/6-311G(d)和UQCISD(T)/6-311+G(3df)//UMP2/6-311G(d)水平下的能量值均说明具有D2h对称性、1^Ag电子态的异构是Al2F2分子的最稳定构型,其Al-F键长为0.19074nm,键角Al-F-Al和F-Al-F分别为104.62°和75.38°,以及两个强振动,441.27cm^-1和401.93cm^-1,均与实验结果相符合。电子结构分析表明,具有D2h对称性的异构体的活性中心在2个Al原子上,在形成衍生物时是主要的反应加成位置。在UMP2/6-311G(d)和UQCISD(T)6-311+G(3df)//UMP2/6-311G(d)水平下得到了AlF二聚化能量分别为-75.01kJ/mol和-66.07kJ/mol,与文献估计算基本一致,说明AlF二聚化反应能量上是有利的。     

HBO2异构体的结构和相对稳定性

用ab initio方法在MP2/6 311＋＋G(d,p)水平下优化得到了HBO2体系的若干异构体和过渡态，并在QCISD(t)/6 311＋＋G(3df,2p)//MP2/6 311＋＋G(d,p)水平下进行了单点能量校正.对计算结果的分析表明，无论是在热力学还是在动力学上，具有链状结构的HOBO异构体(E1)是势能面上最稳定的结构，并对E1的电子结构进行了分析；另一具有C2v对称性的HBO(O)结构的异构体(E2)的能量比E1高381.72 kJ•mol－1，由于E2处于一个较深的势垒中，因此是比较稳定的，可以推断，在适合的实验中应该可以观察到异构体E2.     

S2O2分子稳定结构的密度泛函理论研究

采用密度泛函理论中的B3LYP方法,在6-311+G(3df)和Aug-cc-pVTZ水平上,研究了单态S2O2分子的各种可能的异构体及其相对稳定性。结果表明,具有C2v对称性的三角平面分叉异构体的热力学稳定性要高于目前实验上唯一被发现的具有C2v对称性的cis-OSSO异构体,同时trans-OSSO的稳定性与顺式异构体十分接近,这2种异构体应该可以在实验上被观察到。同时本文还讨论了3个最稳定构型的前线分子轨道和链型OSSO的内扭转势能。     

1, 2-二硒方酸气相酸性和芳香性的理论研究

在RHF/6-311G^*^*水平优化得到1,2-二硒方酸(3,4-二羟基-3-环丁烯-1,2-二硒酮)三种平面构象异构体的平衡几何构型。进一步用MP2(full)/6-311G^*//RHF/6-311G^*^*方法计算三种异构体的单点能量,发现ZZ型异构体是能量最低构象,且ZZ和ZE型能量非常接近。用优化的最稳定构象ZZ型异构体在RHF/6-311G^*^*//RHF/6-311G^*^*,RHF/6-311+G^*^*//RHF/6-311+G^*^*,MP2(full)/6-311+G^*^*//RHF/6-311+G^*^*和B3LYP/6-311+G^*^*//B3LYP/6-311+G^*^*水平计算其气相酸性[ΔGⅲ~(~2~9~8~K~)]和同键反应芳香性稳定化能(HASE)。用基团加和法(groupincrementapproach)在RHF/6-311+G^*^*//RHF/6-311+G^*^*和B3LYP/6-311+G^*^*//B3LYP/6-311+G^*^*水平计算其磁化率增量(Λ)。计算结果指出标题化合物的键长发生了平均化,同键反应芳香性稳定化能和磁化率增量均为负值,表明它具有芳香性,实现了标题化合物芳香性的几何、能量和磁性的判定。     

B2F2分子异构体结构的量子化学计算研究

采用abinitio方法对B₂F₂分子异构体的结构进行了计算研究,并与Al₂F₂分子进行了比较.结果表明,B₂F₂具有D_∞h对称性,³Σ_g电子态的直线型结构FBBF是B₂F₂分子的最稳定异构体,对文献的结果进行了修正.在UCCSD(T,full)/6－311+G(2df)水平下,F-B和B-B键长分别为0.12942和0.14820nm,振动频率出现在1860.00和1320.62cm^-1处.在UQCISD(T,full)/6－311+G(2df)//UMP2(full)/6－311+G(d)+ZPVE水平下,³Σ_g态的线性FBBF分子的垂直电离势为848.58kJ/mol,而由³Σ_g电子态的BF二聚为³Σ_g态的线性FBBF分子的焓变为59.86kJ/mol,此二聚化反应是放热反应,说明二聚化过程在能量上是有利的.     

氧原子簇Oxy (x=2～6, y=-2～2)的结构、能学与光谱性质

在B3 LYP/6-311 G(d,p)水平上,对氧原子簇Oxy(x=2～6,y=-2～2)的结构、能学与光谱性质进行了量子化学从头计算,对3O2和2O2+的基态和激发态进行了CASSCF计算.结果表明,氧分子及其离子的体系总能量大小为＜O2+ (2Пg) ＜1O2 +2(1∑g+).活性的二重态氧分子负离子2O2-(2Пgi)在相对能量上只比三重态的中性氧分子3O2(3Σg-)高 28 kJ/mol.对于弯曲型(Structure-I)的臭氧分子(O3)及其离子,其体系总能量相对次序为2O3-(2B1) ＜1O3(1A1) ＜3O3(3B2) ＜1O3-2(1A1) ＜2O3+(2A1).氧四聚体(O4)及其离子的体系总能量相对大小为2O4-(C8弯曲型,2A′)＜2O4-(C2v面心三角型,2A2) ＜2O4-(D∞h直线型,2∑g)＜1O4(C8弯曲型,1A′)＜1O4(D∞h直线型,1∑g)＜1O4(D4h正方型,1A1g) ＜1O4(C2v面心三角型,1A1)＜2O4-(D4h正方型,1A1g)＜2O4+(D∞h直线型,2∑g)＜2O4+(C8弯曲型,1A′).相对能量最低的氧四聚体物种是呈椅形的带一个负电荷的负离子2O4-(C8弯曲型,2A′),其特征振动频率应出现在1179和1349cm-1.共面三角双锥型的1O5(C2v,1A1)相对能量最低,其与A字型(C2v,1A1)可能是共振构型,特征振动频率位于1302 cm-1.氧六聚体(O6)的六边型构型的相对能量较低,其振动频率的红外强度很弱,但从其对称性看,应具有较强的拉曼强度. 以B3LYP/6-311G(d,p)方法计算、并经0.9614因子校正的氧分子及其离子的O-O振动频率与实验值相当吻合.     

环型硫分子的从头算及其应用

通过对环型硫分子S6～S20同素异构体的实验结构分析,用从头算(ab initio)RHF/6-311G*(包括BLYP/6-311G* 和MP4/6-311G*)方法进行基态几何结构优化,获得了与实验结构相吻合的新的理论稳定构型.其中S18的两种变体S18(α)和S18(β)的能量相近,都是相互稳定的分子构型.通过计算,从理论上推测S20有D4点群的物相.还就对称性、偶极矩和红外振动光谱与分子构象的相互关系,以及环分子结构与化学活性之间的关系进行了讨论,获得了具有实验意义的结论.     

HPO_2异构体结构和相对稳定性

在MP2/6-311++G（d,p）和QCISD（t）/6-311++G（3df,2p）（单点）水平下计算得到了包括8个异构体和12个过渡态的HPO2体系势能面.在势能面上,异构体cis-HOPO（EI）的能量是最低的,其次是trans-HOPO（E2）和HPO（O）（C2v,E3）,能量分别比cis-HOPO高10.99和48.36 kJ/mol.根据体系的势能面,只有异构体E1和E3具有较高的动力学稳定性,在实验中应该可以观测到.PH和O2直接反应生成的cis-HPOO（E5）和trans-HPOO（E6）经过几步势垒较低的异构化过程就可以异构化为具有较高动力学稳定性的产物E1;而OH和PO反应可直接生成E1.计算结果较好地解释了相关实验.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.