Structure,electrical transport,and optical properties of a new ordered iron intercalated dichalcogenide,Fe0.34TiSe2

The compound Fe_0.34TiSe₂ crystallizes in space group D³_3d?P3&#x0304;ml of the trigonal system with 8 formula units in a cell of dimensions a = 7.148(4), c = 11.880(7) Å at 117 K. The structure of Fe_0.34TiSe₂ can be derived from that of TiSe₂ by insertion of Fe atoms into some of the octahedral holes between the layers. No two adjacent octahedral holes along c contain Fe atoms, that is no two Fe atoms are related by a translation of $\text{c}\text{2}$. The compound Fe_xTiSe₂, x = 0.34, exhibits physical properties remarkably different from those found in either the host material, TiSe₂, or in low iron concentration (x < 0.2) intercalated materials. The electrical resistivity of this compound exhibits a sharp decrease below 120 K which is coincident with a well defined peak in the Hall coefficient. These data have been interpreted as the onset of antiferromagnetic ordering as suggested by results of magnetic susceptibility measurements. Optical reflectance measurements indicate a simple Drude-like free carrier behavior and are consistent with the interpretation of iron as an electron donor in this material.     

Absorption spectroscopic study of the conduction band of titanium dichalcogenides

The L _{2, 3} spectra of titanium in the layered compound TiSe₂ and intercalated compounds Fe_1/2TiSe₂, Cr_1/3TiSe₂, and Fe_1/4TiTe₂ are studied. Theoretical calculations of the electronic structure of these compounds are performed. The experimental data and calculations suggest that the intercalation of the Cr and Fe atoms into the TiSe₂ matrix brings about a partial filling of the Ti 3d states and the spin polarization of the Cr 3d and Fe 3d states. Chemical bonds are formed through the hybridization of the d orbitals of intercalated atoms with the Ti 3d-Se 4p states of the matrix.     

Nd5Fe18B18 (Nd1.11Fe4B4), a new nowotny-like phase. structural and magnetic properties

The crystal structure of a ternary compound, whose chemical composition is Nd₅Fe₁₈B₁₈, has been determined. Nd atoms on the one hand, Fe and B atoms on the other hand, form 2 different substructures, both of tetragonal symmetry. In a previous investigation¹ only incommensurate or very long period ordering along the $\overrightarrow{c}$ directions between the 2 substructures was proposed, with non-definite composition. The whole structure is now described in the Pccn orthorhombic space group (a=b=7.117Å ; c = 35.07Å). This compound appears then as a new Nowotny-like phase. Fe atoms are essentially non magnetic. Ferromagnetic order between Nd atoms occurs only below 14 K. 2^nd order Crystalline Electric Fiel (CEF) terms are deduced from the anisotropy of the paramagnetic susceptibility. Higher order CEF terms must also be considered.     

Structural phase transformations and physical properties of intercalation compounds in the Cr0.5Ti(Se1−x Tex)2 system

The atomic structure and magnetic and electric properties of the Cr_0.5TiSe₂-Cr_0.5TiTe₂ system of intercalated phases were studied in detail by gradually replacing selenium by tellurium. It was revealed that this replacement changes the crystalline structure from monoclinic in the initial compounds to hexagonal in the compounds containing various types of chalcogen atoms; this is accompanied by disordering of chromium atoms in the van der Waals gaps. The electrical resistance and magnetic characteristics vary nonmonotonically on replacement of selenium by tellurium, which is associated with a change in the degree of atomic disordering during the transition from Cr_0.5TiSe₂ to Cr_0.5TiTe₂.     

Specific features of the structure,magnetic properties,and heat capacity of intercalated compounds Cr<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>TiSe<Subscript>2</Subscript>

Structural features, magnetic properties, and heat capacity of Cr _x TiSe₂ intercalated compounds with a layered structure have been studied experimentally for 0 ≤ x ≤ 0.5. It is shown that, at high chromium concentrations (x > 0.25), the magnetic properties of the compounds are strongly affected by the degree of ordering and distribution pattern of the intercalated atoms. Depending on the cooling rate of samples of the same composition (x = 0.5), an antiferromagnetic or a cluster-glass-type state can be obtained. Heat capacity measurements have revealed a nonmonotonic variation in the lattice rigidity with increasing concentration of intercalated atoms.     

First-principles electronic-structure calculation on the spin distribution and the half-metallic properties of the mixed valence iron compound Ba2F2Fe1.5S3

The first principles within the full potential linearized augmented plane wave (FP-LAPW) method with the generalized gradient approximation (GGA) approach were applied to study the new mixed valence compound Ba₂F₂Fe_1.5S₃. The density of states, the electronic band structure and the spin magnetic moment are calculated. The calculations reveal that the compound has an antiferromagnetic interaction between the Fe^III and Fe^II ions arising from the bridging S atoms, which validate the experimental assumptions that there is a low-dimensional antiferromagnetic interaction in Ba₂F₂Fe_1.5S₃. The spin magnetic moment mainly comes from the Fe^III and Fe^II ions with smaller contribution from S anion. By analysis of the band structure, we find that the compound has half-metallic property.     

Magnetic structure and preferential occupation of Fe in the composite compound Nd2Co6Fe

The crystal and magnetic structures of the composite compound Nd₂Co₆Fe have been investigated by high-resolution neutron powder diffraction and X-ray powder diffraction. The compound crystallizes in the hexagonal Ce₂Ni₇-type structure consisting of Nd(Co,Fe)₂ and Nd(Co,Fe)₅ structural blocks alternately stacked along the c-axis. Multi-pattern Rietveld refinement of neutron diffraction and X-ray diffraction data at room temperature reveal that substitution of Fe for Co occurs exclusively in the Nd(Co,Fe)₅ structural blocks. The preferential occupation of the Fe atoms in the structure is discussed based on the mixing enthalpy between Nd and Fe atoms and on the lattice distortions. In agreement with the reported magnetic phase diagram of the Nd₂Co_7−xFe_x compounds, magnetic structure models with the moments of all atoms in the ab plane at 300 K and along the c-axis at 450 K provide a satisfactory fitting to the experimental neutron diffraction data. The refinement results show that the atomic moments of (Co,Fe) atoms within the Nd(Co,Fe)₅ blocks decrease slightly with temperature, whereas the atomic moments of Nd in the compound and of (Co,Fe) atoms at the interface between the Nd(Co,Fe)₂ and Nd(Co,Fe)₅ blocks are reduced significantly.     

Influence of the chalcogen substitution on the character of magnetic ordering in Fe<Subscript>0.5</Subscript>TiS<Subscript>2 − <Emphasis Type="Italic">x</Emphasis></Subscript>Se<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> intercalated compounds

The crystal structure and magnetic properties of layered Fe_0.5TiS_{2 − x} Se _x (0 ≤ x ≤ 2) compounds intercalated by iron atoms have been investigated. It has been shown that the substitution of selenium for sulfur is accompanied by an increase in the unit cell volume, a transition from the ferromagnetic to antiferromagnetic behavior, and a nonmonotonic variation in the paramagnetic Curie temperature. The intercalated iron atoms are characterized by lower values of the effective moment (3.4–4.0μ_B) as compared to the predicted value (4.89μB) for the Fe²⁺ ion at g = 2. The results obtained have been discussed under the assumption that there are the hybridization of 3d electronic states of intercalated Fe atoms with the electronic states of the TiS_{2 − x} Se _x host compounds and the competition of exchange interactions of different types.     

Magnetic structure of the manganites heavily doped by Fe and Cr ions

Powder neutron diffraction and magnetic studies have been performed for NdMn_0.5Fe_0.5O₃ and NdMn_0.5Cr_0.5O₃ manganites. In NdMn_0.5Cr_0.5O₃, magnetic structure has been revealed consisting of ferromagnetic and G-type antiferromagnetic components as result of a 3d-ions magnetic moments ordering. Magnetic moments of Nd-ions are parallel to the ferromagnetic component. In NdMn_0.5Fe_0.5O₃ only the antiferromagnetic G-type structure has been found whereas Nd-sublattice was not ordered. In the both compounds, magnetic moments of 3d-ions are significantly less than one can expect, what is interpreted in terms of intrinsic chemical inhomogeneity. Magnetic phase diagrams have been constructed for the Nd(Mn_1−xM_x)O₃ (M=Fe, Cr) systems, interpreted assuming superexchange interactions Mn³⁺–O–Cr³⁺ to be positive, Mn³⁺–O–Fe³⁺ negative and taking into account a disordered arrangement of Mn and Cr ions in the crystal structure sublattice as well as interplay between Jahn–Teller effect and superexchange interactions.     

Ferromagnetic-to-antiferromagnetic transition in (Hf1−xTix)Fe2 intermetallic compounds induced by geometrical frustration of the Fe(2a) sites

The ferromagnetic-to-antiferromagnetic transition in the hexagonal (Hf_1−xTi_x)Fe₂ (0?x?1) intermetallic compounds has been investigated by ⁵⁷Fe Mössbauer spectroscopy. At 10 K, the transition occurs within rather narrow concentration limits, around x=0.55–0.65. We found that the key factor governing the unexpected quick change of the magnetic structure is the magnetic frustration of the Fe(2a) sites. The magnetic frustration is caused by the noncollinearity of the Fe(6h) magnetic sublattice. The noncollinearity arises from the rotation of the magnetic moments due to the competition between the ferromagnetic exchange interactions and the antiferromagnetic Fe(6h)–Ti–Fe(6h) interaction. In the compounds with x=0.4–0.6, the temperature transitions to the antiferromagnetic state are observed. As an example, the Hf_0.4Ti_0.6Fe₂ compound is completely antiferromagnetic above 200 K.     

Physical properties,crystal and magnetic structure of layered Fe<Subscript>1.11</Subscript>Te<Subscript>1-</Subscript><Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Se<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> superconductors

The physical and structural properties of Fe_1.11Te and Fe_1.11Te_0.5Se_0.5 have been investigated by means of X-ray and neutron diffraction as well as physical property measurements. For the Fe_1.11Te compound, the structure distortion from a tetragonal to monoclinic phase takes place at 64 K accompanied with the onset of antiferromagnetic order upon cooling. The magnetic structure of the monoclinic phase was confirmed to be of antiferromagnetic configuration with a propagation vector k = (1/2, 0, 1/2) based on Rietveld refinement of neutron powder diffraction data. The structural/magnetic transitions are also clearly visible in magnetic, electronic and thermodynamic measurements. For superconducting Fe_1.11Te_0.5Se_0.5 compound, the superconducting transition with T _c = 13.4 K is observed in the resistivity and ac susceptibility measurements. The upper critical field H _c2 is obtained by measuring the resistivity under different magnetic fields. The Kim’s critical state model is adopted to analyze the temperature dependence of the ac susceptibility and the intergranular critical current density is calculated as a function of both field amplitude and temperature. Neutron diffraction results show that Fe_1.11Te_0.5Se_0.5 crystalizes in tetragonal structure at 300 K as in the parent compound Fe_1.11Te and no structural distortion is detected upon cooling to 2 K. However an anisotropic thermal expansion anomaly is observed around 100 K.     

Phase diagrams and magnetic properties of CaCu3Fe2Os2O12 quadruple perovskite: Monte Carlo study

In this paper, a Monte Carlo Simulation (MCS) has been used to study the quadruple perovskite oxide CaCu₃Fe₂Os₂O₁₂. The system has been conceived as a mixture of atoms with the magnetic moments Cu (±1/2), Fe (±5/2, ±3/2, ±1/2) and Os (±3/2, ±1/2). Phase diagrams depending on reduced exchange couplings and reduced crystal fields have been established. A stable ferromagnetic phase at the ground state has been found. Investigation of magnetic properties has been focused on the finite size analysis of magnetization and magnetic susceptibility according to reduced temperatures. Critical temperature has been calculated through simulation and the compound has been found to belong in the three-dimensional Ising model universality class.     

MAGNETIC PROPERTIES OF BALL MILLED FexCu1-x (x=0.4, 0.5) ALLOY

The samples Fe_0.4Cu_0.6 and Fe_0.5Cu_0.5 ball milled for 50 h are investigated by X-ray diffraction, M?ssbauer spectra, as well as magnetic measurement. The experiments show that the structure of the samples is fcc, with lattice constant 0.361 nm and there are fcc Fe-rich phase and fcc Cu-rich phase in the samples. Most of Fe atoms (91%) are in the fcc Fe-rich phase, which is a ferromagnetic phase. The M-H curve at 1.5 K shows the saturation magnetization of the samples are 80.5 emu/g and 101.6 emu/g for Fe_0.4Cu_0.6 and Fe_0.5Cu_0.5 respectively. The average magnetic moment of Fe atoms is deduced to be 2.40 μ_B . Compared with theoretical predication, the Fe atoms in the fcc phase are in high spin state.     

Electronic structures and local magnetic moments in ferromagnetic and antiferromagnetic FexRh1−x alloys

Ground-state magnetic properties of ordered FeRh alloys are discussed by using the realistic canonical d-band model within the Hartree-Fock and coherent potential approximations. Local magnetic moments of Fe and Rh atoms in ferromagnetic and antiferromagnetic Fe_xRh_1-x alloys are computed as a function of x, the Fe concentration. Calculated results are in good agreement with the neutron-diffraction data. The band-energy calculation indicates that in Fe-rich alloys excess Fe atoms substituted on Rh sites having larger magnetic moments than Rh atoms, play an important role in the antiferromagnetic to ferromagnetic transition observed at low temperatures.     

Magnetic phase transition in TbMn2Ge2

The crystal and magnetic stucture of TbMn₂Ge₂ are determined by neutron diffraction using a powder sample. The crystal structure of this compound is of the ThCr₂Si₂ type with small mixing of Mn and Ge atoms between 4(d) and 4(e) positions. At RT the antiferromagnetic collinear structure consist of a+?+? sequence of ferromagnetic layers of Mn atoms with the magnetic moment parallel to the c-axis. At 85 K, the ferromagnetic ordering within the Tb sublattice is observed. The magnetic moment (～7.7 μ_B) is parallel to the c-axis. At 4.2 K additional reflections are observed, which correspond to antiferromagnetic components in a monoclinic unit cell.     

Frontier orbitals analysis and density-functional energetics for metal-substituted fullerene C58Fe2

The formation mechanism, geometric structures, and electronic properties of a metal-substituted fullerene C₅₈Fe₂ have been studied using frontier orbital theory (FOT) and density functional theory (DFT). FOT predicts that two Fe atoms prefer to substitute the two carbons of a [6,6] double bond of C₆₀ yielding a structure denoted as C₅₈Fe₂-3, which is different from the two equivalent substitution sites, i.e., the sites on the opposite of C₆₀ cage or in the nearest neighboring sites of a pentagonal ring for C₅₈X₂ (X=N and B), and also different from the cross sites of a hexagonal ring for C₅₈Si₂. Five possible structures of C₅₈Fe₂ are optimized using DFT to see whether FOT works. The DFT calculations support the prediction of FOT. The Mulliken charge of Fe atom in C₅₈Fe₂-3 shows that the two Fe atoms of C₅₈Fe₂-3 lose 0.70 electron to the carbons of the cage, and the net spin populations of Fe atom indicate that each Fe atom has 1.11 μ_B magnetic moments, while each of the four nearest neighboring carbons has magnetic moments. Thus, the two Fe atoms have ferromagnetic interaction with each other, and have weak antiferromagnetic interaction with their four nearest neighboring carbons, leaving 2.0 μ_B magnetic moments for the molecule.     

The evolution of electronic configuration and magnetic characterization of Fe<Subscript>9</Subscript>Ni<Subscript>1</Subscript>, Fe<Subscript>8</Subscript>Ni<Subscript>2</Subscript> alloy in theoretical calculation

To analyze the origin of the magnetic enhancement of Fe-Ni alloy, the electronicconfigurations and magnetic properties were investigated using density functional theorybased on the first-principle. The supercell (5 × 1 × 1) of Fe,Fe₉Ni₁ and Fe₈Ni₂ were constructed. Thedefect formation energy, band structure, density of states and electron density differencewere calculated. The results showed that Ni doping changed the electronic configuration ofFe atoms, resulting in the enhancement of spin polarization of Fe and the larger Bohrmagnetic moment in Fe-Ni alloys (Fe₉Ni₁). The results showed thatthe charge transfer and the atomic spacing between Fe atoms and the dopant Ni atoms playedan important role in determination of magnetic moment. The value of Fe supercell(5 × 1 × 1), Fe₉Ni₁ and Fe₈Ni₂ were 23.14,23.34 and 22.61μ _B, respectively.     

A study of the new compound YBa4Fe3O11−y

The compound YBa₄Fe₃O _y was synthesized where the Fe atoms completely substituted for the Cu atoms in YBa₄Fe₃O _y . The X-ray phase analysis of the synthesized material showed that the diffraction pattern corresponds to the data for the compound YBa₄Fe₃O _y .⁵⁷Fe Mössbauer measurements of the compound were performed at room temperature after different heat treatments: high-temperature synthesis in an oxygen atmosphere and in air, and low-temperature annealing in oxygen and in vacuum. No magnetic components are observed after any heat treatments. The Fe atoms in the compound have two valence states, Fe³⁺ and Fe⁴⁺. The idealized model of the 1-4-3 Fe structure is discussed.     

Magnetic phase transitions and iron valence in the double perovskite Sr 2 FeOsO 6

The insulating and antiferromagnetic double perovskite Sr₂FeOsO₆ has been studied by ⁵⁷Fe Mössbauer spectroscopy between 5 and 295 K. The iron atoms are essentially in the Fe^3?+? high spin $( {t_{2\mathrm{g}}{^3} e_\mathrm{g}{^2} } )$ and thus the osmium atoms in the Os $^{5+} ( {t_{2\mathrm{g}}{^3} } )$ state. Two magnetic phase transitions, which according to neutron diffraction studies occur below T _N?= 140 K and T ₂?= 67 K, give rise to magnetic hyperfine patterns, which differ considerably in the hyperfine fields and thus, in the corresponding ordered magnetic moments. The evolution of hyperfine field distributions, average values of the hyperfine fields, and magnetic moments with temperature suggests that the magnetic state formed below T _N is strongly frustrated. The frustration is released by a magneto-structural transition which below T ₂ leads to a different spin sequence along the c-direction of the tetragonal crystal structure.     

A Mössbauer study of iron and iron–cobalt nanotubes in polymer ion-track membranes

Iron and iron–cobalt nanostructures that were synthesized in polymer ion-track membranes have been studied via Mössbauer spectroscopy combined with raster electron microscopy, energy-dispersion analysis, and X-ray diffraction data. The obtained nanostructures are single-phase bcc Fe_1–xCo_x nanotubes with a high degree of polycrystallinity, whose length is 12 μm; their diameter is 110 ± 3 nm and the wall thickness is 21 ± 2 nm. Fe²⁺ and Fe³⁺ cations were detected in the nanotubes, which belong to iron salts that were used and formed in the electrochemical deposition. The Fe nanotubes exhibit eventual magnetic moment direction distributions of Fe atoms, whereas Fe/Co nanotubes have a partial magnetic structure along the nanotube axis with a mean value of the angle between the magnetic moment and nanotube axis of 34° ± 2°. Substituting the Fe atom with Co in the nearest environment of the Fe atom within the Fe/Co structure of nanotubes leads to a noticeable increase in the hyperfine magnetic field at the ⁵⁷Fe nuclei (by 8.7 ± 0.4 kOe) and to a slight decrease in the shift of the Mössbauer line (by 0.005 ± 0.004 mm/s).