Palladium nanoparticles supported on poly (N-vinylpyrrolidone)-grafted silica as new recyclable catalyst for Heck cross-coupling reactions

Novel catalytic system based on palladium nanoparticles supported on poly (N-vinylpyrrolidone) (PVP) grafted silica was prepared. Aminopropylsilica was reacted with acryloyl chloride to form acrylamidopropylsilica, and onto this functionalized silica vinylpyrrolidone monomer was polymerized by free-radical polymerization. The complexation of PVP-grafted silica with PdCl₂ was carried out to obtain the heterogeneous catalytic system. X-ray diffraction (XRD) technique and transmission electron microscopy (TEM) image showed that palladium dispersed through the support in nanometer size. This catalytic system exhibited excellent activity in cross-coupling reactions of aryl iodides, bromides and also chlorides with olefinic compounds in Heck-Mizoraki reactions in short reaction time and high yields. Elemental analysis of Pd by inductively coupled plasma (ICP) technique and hot filtration test showed low leaching of the metal into solution from the supported catalyst. The catalyst can be reused several times in repeating Heck reaction cycles without considerable loss in its activity.     

Immobilized palladium nanoparticles on silica functionalized N-propylpiperazine sodium N-propionate (SBPPSP): catalytic activity evaluation in copper-free Sonogashira reaction

An efficient heterogeneous palladium catalyst system has been developed based on immobilization of Pd nanoparticles on silica-bonded N-propylpiperazine sodium N-propionate (SBPPSP) substrate. SBPPSP substrate can stabilize the Pd nanoparticles effectively so that it can improve their stability against aggregation. In addition, grafted piperazine species on to the silica backbone prevent the removing of Pd nanoparticles from the substrate surface. Transmission electron microscopy (TEM) of catalyst is shown the size of Pd nanoparticles, also it confirmed by particle size analyzer which shown the average size of 21 nm for Pd. The catalytic activity of these catalysts was investigated in the Sonogashira reaction. The catalyst could be recycled several times without appreciable loss in catalytic activity.     

Carbon nanospheres with well‐controlled nano‐morphologies as support for palladium‐catalyzed Suzuki coupling reaction

Uniform carbon nanospheres (UCS) with well‐controlled nano‐morphologies were fabricated by hydrothermal carbonization of sucrose in the presence of kayexalate. Highly dispersed and ultrafine palladium nanoparticles were supported on the UCS through a facile co‐reduction process with NaBH₄ as reducing agent. The obtained Pd@UCS exhibited efficient catalytic activity for the Suzuki coupling reaction. Moreover, the as‐prepared catalyst could be recycled and reused at least five times without significant loss of its catalytic activity.     

Oxygen dissociation on palladium and gold core/shell nanoparticles

Oxygen dissociation reaction on gold, palladium, and gold‐palladium core/shell nanoparticles was investigated with plane wave basis set, density functional theory. Bader population analysis of charge and electron distribution was employed to understand the change of catalytic activity as a function of the nanopaticle composition. The nanoparticles’ electronic properties were investigated and the degree of core/shell charge polarization was estimated for each composition. It was found that surface polarization plays an important role in the catalysis of the initial step of electrophile reactions such as oxygen dissociation. We have investigated the O₂ adsorption energy on each nanoparticle and the activation barrier for the oxygen dissociation reaction as a function of the nanoparticle structure. Furthermore, we have investigated the influence of surface geometry, that is., surface bond lengths on the catalytic activity. We have compared the electronic and the geometry effects on the oxygen activation and dissociation. Our design rules for core/shell nanoparticles offer an effective method for control of the surface catalytic activity. Palladium and gold are often used as catalysts in synthetic chemistry. First‐principles calculations elucidate the mechanisms that control the surface reactivity of gold, palladium, and gold‐palladium core shell nanoparticles in oxygen dissociation reactions. Oxygen dissociation is promoted on the gold surface of gold/palladium core‐shell nanoparticles by favorable electron transfer from the core to the shell. Such core‐shell electronic effects can be used for fine‐tuning the nanoparticles catalytic activity.     

ZIF-8原位负载Pd纳米粒子及其在Suzuki-Miyaura反应中的应用(英文)

将PdCl2与ZIF-8的反应原料ZnO和2-甲基咪唑按照一定的比例,采用机械化学法原位将Pd2+负载在ZIF-8上(Pd2+/ZIF-8)。然后用NaBH4将Pd2+/ZIF-8进行还原,得到均匀分散的Pd纳米颗粒(Pd/ZIF-8)。通过XRD、N2吸附、透射电镜、ICP-AES、XPS等对Pd/ZIF-8的结构、形貌、价态等进行了表征。结果表明用机械化学法原位制备的Pd/ZIF-8具有分散均匀、容易大量制备的优点。该催化剂不仅能高效催化Suzuki-Miyaura交叉偶联反应,并且能够多次循环利用。     

Fe3O4@SiO2-polymer-imid-Pd magnetic porous nanosphere as magnetically separable catalyst for Mizoroki–Heck and Suzuki–Miyaura coupling reactions

The activity of palladium nanoparticles supported on poly (N-vinylpyrrolidone) grafted Fe₃O₄@SiO₂ was investigated in the cross-coupling reactions. We have applied this catalyst under low loading of the supported palladium nanoparticles for the coupling of aryl halides with alkenes (Mizoroki–Heck reaction) and organoboronic acids (Suzuki–Miyaura reaction) in the absence of phosphorous ligands. Short reaction times and excellent yields of the products express the effectiveness of this catalyst. The nanocatalyst can be separated from the reaction mixture by applying a permanent magnet externally and can be reused for six times without appreciable change in catalytic activity. Also, the amount of leaching of Pd nanoparticles has been determined by ICP analysis and results showed low leaching of the metal into solution from the supported catalyst.     

Synthesis of highly dispersed Pd/C electro-catalyst with high activity for formic acid oxidation

In this study, we present a simple process to obtain highly dispersed palladium nanoparticles on Vulcan XC-72R carbon support without any protective agent. To obtain high metal loading Pd/C catalyst without any surfactant, we modified the polyol process by employing NH₃ species as a mediation to control the reaction pathway to avoid the precipitation of Pd(OH)₂, and hence the agglomeration of Pd nanoparticles. The obtained Pd/C sample was characterized by X-ray diffraction (XRD) and transmission electron microscope (TEM) techniques. The results show that highly dispersed Pd/C catalyst with an average diameter of 3.0 nm could be obtained in this novel process. The activity of formic acid oxidation on this Pd/C catalyst was examined via cyclic voltammetry technique and it is found that the catalytic activity is greatly enhanced due to the reduced particle size and the improved dispersion of palladium nanoparticles on the carbon surface.     

Urea‐Based Porous Organic Frameworks: Effective Supports for Catalysis in Neat Water

Two urea‐based porous organic frameworks, UOF‐1 and UOF‐2, were synthesized through a urea‐forming condensation of 1,3,5‐benzenetriisocyanate with 1,4‐diaminobenzene and benzidine, respectively. UOF‐1 and UOF‐2 possess good hydrophilic properties and high scavenging ability for palladium. Their palladium polymers, Pd^II/UOF‐1 and Pd^II/UOF‐2, exhibit high catalytic activity and selectivity for Suzuki–Miyaura cross‐coupling reactions and selective reduction of nitroarenes in water. The catalytic reactions can be efficiently performed at room temperature. Palladium nanoparticles with narrow size distribution were formed after the catalytic reaction and were well dispersed in UOF‐1 and UOF‐2. XPS analysis confirmed the coordination of the urea oxygen atom with palladium. SEM and TEM images showed that the original network morphology of UOF‐1 and UOF‐2 was maintained after palladium loading and catalytic reactions.     

Sustainable Catalysis: Rational Pd Loading on MIL‐101Cr‐NH2 for More Efficient and Recyclable Suzuki–Miyaura Reactions

Palladium nanoparticles have been immobilized into an amino‐functionalized metal–organic framework (MOF), MIL‐101Cr‐NH₂, to form Pd@MIL‐101Cr‐NH₂. Four materials with different loadings of palladium have been prepared (denoted as 4‐, 8‐, 12‐, and 16 wt %Pd@MIL‐101Cr‐NH₂). The effects of catalyst loading and the size and distribution of the Pd nanoparticles on the catalytic performance have been studied. The catalysts were characterized by using scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier‐transform infrared (FTIR) spectroscopy, powder X‐ray diffraction (PXRD), N₂‐sorption isotherms, elemental analysis, and thermogravimetric analysis (TGA). To better characterize the palladium nanoparticles and their distribution in MIL‐101Cr‐NH₂, electron tomography was employed to reconstruct the 3D volume of 8 wt %Pd@MIL‐101Cr‐NH₂ particles. The pair distribution functions (PDFs) of the samples were extracted from total scattering experiments using high‐energy X‐rays (60 keV). The catalytic activity of the four MOF materials with different loadings of palladium nanoparticles was studied in the Suzuki–Miyaura cross‐coupling reaction. The best catalytic performance was obtained with the MOF that contained 8 wt % palladium nanoparticles. The metallic palladium nanoparticles were homogeneously distributed, with an average size of 2.6 nm. Excellent yields were obtained for a wide scope of substrates under remarkably mild conditions (water, aerobic conditions, room temperature, catalyst loading as low as 0.15 mol %). The material can be recycled at least 10 times without alteration of its catalytic properties.     

A comparison between two Pd‐Ni catalysts supported on two different supports toward Suzuki‐Miyaura coupling reaction

When a single metal fails to promote an efficient Suzuki‐Miyaura coupling reaction at ambient temperature, the synergistic cooperation of two distinct metals might improve the reaction. To examine the synergistic effect of palladium and nickel for catalyzing Suzuki coupling reaction, g‐C₃N₄ supported metal nanoparticles of PdO, NiO and Pd‐PdO‐NiO were prepared, characterized and their catalytic activities evaluated over different aryl halides at room temperature and 78 °C. The morphological characterization of Pd‐PdO‐NiO/g‐C₃N₄ demonstrated that the bimetallic particles were uniformly dispersed over the g‐C₃N₄ layers with diameters ranging from 3.5‐7.7 nm. XPS analysis showed that nanoparticles of Pd‐PdO‐NiO consisted of Pd(II), Pd(0) and Ni(II) sites. The experiments performed on the catalytic activity of Pd‐PdO‐NiO/g‐C₃N₄ showed that the prepared catalyst demonstrated an efficient activity without using toxic solvents.     

Nature of the modifying action of white phosphorus on the properties of nanosized hydrogenation catalysts based on bis(dibenzylideneacetone)palladium(0)

The catalytic properties and nature of the nanoparticles forming in the system based on Pd(dba)₂ and white phosphorus are reported. A schematic mechanism is suggested for the formation of nanosized palladium-based hydrogenation catalysts. The mechanism includes the formation of palladium nanoclusters via the interaction of Pd(dba)₂ with the solvent (N,N-dimethylformamide) and substrate and the formation of palladium phosphide nanoparticles. The inhibiting effect exerted by elemental phosphorus on the catalytic process is due to the conversion of part of the Pd(0) into palladium phosphides, which are inactive in hydrogenation under mild conditions, and the formation of mainly segregated palladium nanoclusters and palladium phosphide nanoparticles. By investigating the interaction between Pd(dba)₂ and white phosphorus in benzene, it has been established that the formation of palladium phosphides under mild conditions consists of the following consecutive steps: Pd(0) → PdP₂ → Pd₅P₂ → Pd₃P. It is explained why white phosphorus can produce diametrically opposite effects of on the catalytic properties of nanosized palladium-based hydrogenation catalysts, depending on the nature of the palladium precursor.     

Fabrication of magnetically separable palladium–graphene nanocomposite with unique catalytic property of hydrogenation

One step solvothermal route has been developed to prepare a well dispersed magnetically separable palladium–graphene nanocomposite, which can act as a unique catalyst against hydrogenation due to the uniform decoration of palladium nanoparticles throughout the surface of the magnetite–graphene nanocomposite and hence can be reused for several times. In addition to catalytic activity, palladium nanoparticles also facilitate the formation and homogeneous distribution of magnetite (Fe₃O₄) nanoparticles onto the graphene surfaces or else an agglomerated product has been obtained after the solvothermal reduction of graphene oxide in presence of Fe³⁺ alone.     

Palladium catalysts deposited on silicon nitride in the deep oxidation of methane

The physicochemical and catalytic properties of palladium catalysts were studied in the deep oxidation of methane. The catalysts were deposited on silicon nitride from aqueous (Pd/Si₃N₄-a) and toluene (Pd/Si₃N₄-t) solutions of palladium acetate. The use of aqueous and organic solutions of palladium acetate, all other preparation conditions being equal, resulted in the formation of palladium systems with different catalytic properties. The sample from Pd/Si₃N₄-t was characterized by high activity and stability. The systems studied had different structures and adsorption properties of palladium nanoparticles, which influenced the form of reagent adsorption, catalytic properties, and mechanism of surface reactions. The suggestion was made that the solvent played a key role in the formation of the active surface of Pd-containing catalytic systems.     

The synthesis and characterisation of immobilised palladium carbene complexes and their application to heterogeneous catalysis

Silica supported palladium NHC complexes have been prepared by two different routes: one involving the reaction of silica-supported imidazolium salts with palladium acetate and a direct immobilisation of a pre-formed complex by reacting a (trimethoxysilylpropyl)-N-aryl-imidazolylidene palladium complex with surface hydroxyl groups. A small range of catalysts of varying steric bulk were prepared in order to evaluate the effect on catalytic conversion. The activity of the palladium catalysts in Suzuki cross-coupling reactions has been established. The catalysts prepared by immobilising pre-formed palladium complexes gave superior results for the conversion of aryl bromides and aryl chlorides. In addition, use of sterically bulky NHCs (such as the N-2,6-(diisopropyl)phenyl-substituted ligand) resulted in increased catalytic activity, which is analogous to the trends noted in homogeneous catalysis.     

Site-selective direct arylation of unprotected adenine nucleosides mediated by palladium and copper: insights into the reaction mechanism

Reaction conditions facilitating the site-selective direct aryl functionalisation at the C-8 position of adenine nucleosides have been identified. Many different aromatic components may be effectively cross-coupled to provide a diverse array of arylated adenine nucleoside products without the need for ribose or adenine protecting groups. The optimal palladium catalyst loading lies between 0.5 and 5 mol %. Addition of excess mercury to the reaction had a negligible affect on catalysis, suggesting the involvement of a homogeneous catalytic species. A study by transmission electron microscopy (TEM) shows that metal containing nanoparticles, ca. 3 nm with good uniformity, are formed during the latter stages of the reaction. Stabilised PVP palladium colloids (PVP=N-polyvinylpyrrolidone) are catalytically active in the direct arylation process, releasing homogenous palladium into solution. The effect of various substituted 2-pyridine ligand additives has been investigated. A mechanism for the site-selective arylation of adenosine is proposed.     

Synthesis and applications of polyvinylpyridine-grafted silica containing palladium nanoparticles as a new heterogeneous catalyst for heck and suzuki coupling reactions

A new catalytic system based on palladium nanoparticles supported on poly(4-vinylpyridine) (P4VPy)-grafted silica is introduced. Aminopropylsilica was reacted with acryloyl chloride to form acrylamidopropylsilica. Onto this functionalized silica, 4-vinylpyridine monomer was polymerized by free radical polymerization. The P4VPy-grafted silica was characterized by FT-IR spectroscopy and the amount of (P4VPy) grafted was determind by thermogravimetric analysis (TGA). The complexation of (P4VPy)-grafted silica with Pd(Cl)₂ was carried out to obtain the heterogeneous catalytic system. Transmission electron microscopy images (TEM) showed that palladium dispersed through polymer surface in nanoparticle size. This catalytic system exhibited excellent activity in cross-coupling reactions of aryl iodides, bromides and also chlorides, with olefinic compounds in Heck-Mizoraki, and with benzylbronic acid in Suzuki-Miyaura reactions. The use of aryl chlorides in cross-coupling reactions is usually hardly successful, but excellent results were gained in the presence of terta-n-butylammonium bromide (TBAB) as an additive. The turnover number (TON) of this catalyst reaches up to 9 × 10⁴ in these C-C bond forming reactions. High efficiency of the catalyst along with short reaction time, high yields, easy purification, recyclability, large scale synthesis and simple procedure are among the advantages of this catalytic system     

3-D composite electrodes for high performance PEM fuel cells composed of Pt supported on nitrogen-doped carbon nanotubes grown on carbon paper

The 3-D composite electrodes consisting of Pt nanoparticles supported on nitrogen-doped carbon nanotubes (CN_x) grown directly on carbon paper were successfully prepared. The effect of the nitrogen atom incorporation in carbon nanotubes (CNTs) on the Pt nanoparticle dispersion and catalytic activities for the oxygen reduction reaction has been investigated. Compared to regular CNTs, highly dispersed Pt nanoparticles with smaller size (2–3 nm) and higher electrochemical Pt surface area as well as higher fuel cell performance were obtained for CN_x.     

Pd supported on graphene modified g-C3N4 hybrid: a highly efficient catalyst for hydrogenation of nitroarenes

Graphitic carbon nitride (g-C₃N₄) and graphene (GO) have been greatly utilized as supports in the field of heterogeneous catalysis. In this work, layered C₃N₄ polymer/graphene hybrid (CNNS/rGO₂₀) with heterostructure was fabricated by a hydrothermal method followed by loading Pd nanoparticles on the hybrid. The palladium was well dispersed uniformly (1.31 nm) owing to the layered and porous heterostructure of CNNS/rGO₂₀. The obtained catalyst was used for the transfer hydrogenation of a series of nitro-compounds to give the corresponding aromatic amines with outstanding activity by employing formic acid as hydrogen donor under mild conditions. The catalytic activity of the heterogeneous catalyst showed no significant loss after five continuous use.     

Oxidative addition of N-halosuccinimides to palladium(0): the discovery of neutral palladium(II) imidate complexes, which enhance Stille coupling of allylic and benzylic halides

The Stille coupling of organostannanes and organohalides, mediated by air and moisture stable palladium(II) phosphine complexes containing succinimide or phthalimide (imidate) ligands, has been investigated. An efficient synthetic route to several palladium(II) complexes containing succinimide and phthalimide ligands, has been developed. cis-Bromobis(triphenylphosphine)(N-succinimide)palladium(II) [(Ph₃P)₂Pd(N-Succ)Br] is shown to mediate the Stille coupling of allylic and benzylic halides with alkenyl, aryl and allyl stannanes. In competition experiments between 4-nitrobromobenzene and benzyl bromide with a cis-stannylvinyl ester, (Ph₃P)₂Pd(N-Succ)Br preferentially cross-couples benzyl bromide, whereas with other commonly employed precatalysts 4-nitrobromobenzene undergoes preferential cross-coupling. Furthermore, preferential reaction of deactivated benzyl bromides over activated benzyl bromides is observed for the first time. The type of halide and presence of a succinimide ligand are essential for effective Stille coupling. The type of phosphine ligand is also shown to alter the catalytic activity of palladium(II) succinimide complexes.     

Electrochemical DNA Biosensors Based on Palladium Nanoparticles Combined with Carbon Nanotubes

Palladium nanoparticles, in combination with multi‐walled carbon nanotubes (MWCNTs), were used to fabricate a sensitivity‐enhanced electrochemical DNA biosensor. MWCNTs and palladium nanoparticles were dispersed in Nafion, which were used to modify a glassy carbon electrode (GCE). Oligonucleotides with amino groups at the 5′ end were covalently linked onto carboxylic groups of MWCNTs on the electrode. The hybridization events were monitored by differential pulse voltammetry (DPV) measurement using methylene blue (MB) as an indicator. Due to the ability of carbon nanotubes to promote electron‐transfer and the high catalytic activities of palladium nanoparticles for electrochemical reaction of MB, the sensitivity of presented electrochemical DNA biosensors was remarkably improved. The detection limit of the method for target DNA was 1.2×10^?13 M.