Extraction of heavy metals from galvanic sludges

Extraction of copper, nickel, zinc, and chromium from galvanic sludges by various complexons (pyrocatechol, phenanthroline, disodium ethylendiaminetetraacetate, and nitrilotrimethylenephosphonic acid) was considered.     

Adsorption of heavy metal ions on soils and soils constituents

The article focuses on adsorption of heavy metal ions on soils and soils constituents such as clay minerals, metal (hydr)oxides, and soil organic matter. Empirical and mechanistic model approaches for heavy metal adsorption and parameter determination in such models have been reviewed. Sorption mechanisms in soils, the influence of surface functional groups and surface complexation as well as parameters influencing adsorption are discussed. The individual adsorption behavior of Cd, Cr, Pb, Cu, Mn, Zn and Co on soils and soil constituents is reviewed.     

Adsorption of heavy metal ions to floc-type biosorbents

Adsorption of cadmium and lead ions to floc-type biosorbents was reported in this work. Two types of biosorbents containing a marine microalga, Heterosigma akashiwo (Hada) Hada, or a purple non-sulfur bacterium, Rhodobacter sphaeroides, were prepared. The micro-organisms inactivated by steam sterilization were immobilized in casein floc and cross-linked with glutaraldehyde. In the present immobilizing method, we obtained the biosorbents comprising as much as 67% of micro-organism on a dry-weight basis. Simple metal-binding models were applied to explain the adsorption mechanism of bivalent metal ions to the biosorbents. The results showed that casein acted as both the immobilizing material and the adsorbent material. The adsorption of bivalent metal ions to the biosorbents was due to bidentate binding to the acidic sites on casein and monodentate binding to the acidic sites on micro-organisms. The metal-binding constants and the binding capacities of micro-organisms were scarcely influenced by immobilization.     

Adsorption of heavy metal ions by immobilized phytic acid

Applied Biochemistry and Biotechnology - Phytic acid (myoinositol hexaphosphate) or its calcium salt, phytate, is an important plant constituent. It accounts for up to 85% of total phosphorus in...     

Adsorption of heavy metal ions from aqueous solution by polyrhodanine-encapsulated magnetic nanoparticles

The influence of salt concentration on the terminal velocities of gravity-driven single bubbles sliding along an inclined glass wall has been investigated, in an effort to establish whether surface forces acting between the wall and the bubble influence the latter's mobility. A simple sliding bubble apparatus was employed to measure the terminal velocities of air bubbles with radii ranging from 0.3 to 1.5 mm sliding along the interior wall of an inclined Pyrex glass cylinder with inclination angles between 0.6 and 40.1°. Experiments were performed in pure water, 10 mM and 100 mM KCl solutions. We compared our experimental results with a theory by Hodges et al. which considers hydrodynamic forces only, and with a theory developed by two of us which considers surface forces to play a significant role. Our experimental results demonstrate that the terminal velocity of the bubble not only varies with the angle of inclination and the bubble size but also with the salt concentration, particularly at low inclination angles of ～1-5°, indicating that double-layer forces between the bubble and the wall influence the sliding behavior. This is the first demonstration that terminal velocities of sliding bubbles are affected by disjoining pressure.     

Adsorption of heavy metal ions onto dithizone-anchored poly (EGDMA-HEMA) microbeads

The dithizone-anchored poly (EGDMA-HEMA) microbeads were prepared for the removal of heavy metal ions (i.e. cadmium, mercury, chromium and lead) from aqueous media containing different amounts of these ions (25-500 ppm) and at different pH values (2.0-8.0). The maximum adsorptions of heavy metal ions onto the dithizone-anchored microbeads from their solutions was 18.3, Cd(II); 43.1, Hg(II); 62.2, Cr(III) and 155.2 mg g(-1) for Pb(II). Competition between heavy metal ions (in the case of adsorption from mixture) yielded adsorption capacities of 9.7, Cd(II); 28.7, Hg(II); 17.6, Cr(III) and 38.3 mg g(-1) for Pb(II). The same affinity order was observed under non-competitive and competitive adsorption, i.e. Cr(III)>Pb(II)>Hg(II)>Cd(II). The adsorption of heavy metal ions increased with increasing pH and reached a plateaue value at around pH 5.0. Heavy metal ion adsorption from artificial wastewater was also studied. The adsorption capacities are 4.3, Cd(II); 13.2, Hg(II); 7.2, Cr(III) and 16.4 mg g(-1) for Pb(II). Desorption of heavy metal ions was achieved using 0.1 M HNO(3). The dithizone-anchored microbeads are suitable for repeated use (for more than five cycles) without noticeable loss of capacity.     

Adsorption behaviour of metal ions on hydroximate resins

Some new chelating ion-exchange resins containing a hydroxamic acid moiety attached to a divinylbenzene styrene (DVBS) copolymer, i.e. glycine hydroximate in DVBS (GH-DVBS). anthranilic acid hydroximate in DVBS (AAHDVBS), malonic acid dihydroximate in DVBS (MAH-DVBS) and iminodiacetic acid dihydroximate in DVBS (IDAAH-DVBS). have been synthesized and their various physicochemical characteristics studied. The degree of retention of metal ions by the resins at equilibrium has been determined in terms of the molar distribution coefficient (k(d)). In general, the resins having a dihydroximate moiety are found to be more efficient compared to monohydroximate resins. However, it is of interest to note that the monohydroximate derivative of amino acid (GH-DVBS) showed better metal retention capability than the dihydroximate of carboxylic acid (MAH-DVBS). The selectivity of the resins for transition and highly charged metal ions is quite high compared to that for alkaline earth metals. All the synthesized resins can be utilized for the separation of a mixture of metal ions because the differences in the distribution coefficient values are large enough to permit good separations on columns. However, the GH-DVBS resin was tried for the separation of copper cobalt and copper nickel mixtures at pH 5.5 using the column mode of operation.     

Adsorption of several metal ions onto a model soil sample: equilibrium and EPR studies

Soils play an important role in the control of metallic cations in the environment. Therefore, knowledge of the adsorption properties of soil is crucial in understanding and solving pollution problems. Adsorption isotherms provide a macroscopic view of the retention phenomena. The aim of this paper is to study iron, manganese, and chromium adsorption onto a soil sample as a function of the reaction time, pH, and metal concentration. The adsorption isotherms allow the determination of the affinity order of metals for the surface of the soil sample as such: Fe(3+)>Cr(3+)>Mn(2+). The equilibrium data fit well with the Langmuir and Freundlich models and confirm the affinity order of the soil sample for these metals. These adsorption data are combined with EPR spectroscopy to obtain structural information about the surface complexes formed. Iron is held in inner-sphere complexes. Manganese is simultaneously held in outer- and inner-sphere complexes. Due to poor resolution, chromium was not detected by EPR and thus it is impossible to infer coordination sphere and coordination number. Iron and manganese are in an octahedral environment.     

Adsorption of some bivalent heavy metal ions from aqueous solutions by manganese nodule leached residues

The leached residue, generated after selective extraction of Cu, Ni, and Co in sulfur dioxide-ammonia leaching of manganese nodules, was characterized and batch isothermal adsorption experiments were conducted at ambient temperature to evaluate the effectiveness of the water-washed leached residue for removal of different bivalent metal ions from aqueous synthetic solutions. The effects of pH, initial metal ion concentrations, amount of adsorbent, interfering ions, and heat treatment were also investigated. The uptake of metal ions increased with increasing pH. Under identical conditions the adsorption capacity increased in the order Cd(2+)相似文献   

金属离子在多孔硅表面和吸附与电镀过程中金属在多孔硅表面的淀积

刚制备的多孔硅与金属盐溶液接触会产生金属离子在多孔硅表面和吸附现象。实验显示这一现象只发生在新鲜的多孔硅表面, 而存放一月以后的样品不具备此性质。文中把这一现象归因于新鲜的多孔硅表面电子的富集, 溶液中金属离子从多孔硅表面获得电子而附着。多孔硅表面电镀金属过程中, 一定电压下电镀电流密度在起始阶段逐渐下降, 可以用一个指数关系式较好地描述, 在本文中有一个唯象模型予以解释。     

金属离子在多孔硅表面和吸附与电镀过程中金属在多孔硅表面的淀积

刚制备的多孔硅与金属盐溶液接触会产生金属离子在多孔硅表面和吸附现象。实验显示这一现象只发生在新鲜的多孔硅表面, 而存放一月以后的样品不具备此性质。文中把这一现象归因于新鲜的多孔硅表面电子的富集, 溶液中金属离子从多孔硅表面获得电子而附着。多孔硅表面电镀金属过程中, 一定电压下电镀电流密度在起始阶段逐渐下降, 可以用一个指数关系式较好地描述, 在本文中有一个唯象模型予以解释。     

ESCA-studies on activated silicagel surfaces preconcentrating heavy metal ions

Summary The theoretical ion-exchange capacity of an aminosilylated silicagel surface loaded with dithiocarbamate (DTC) groups was calculated by correlation of the results of a BET measurement, a quantitative determination of the concentration of reactive single hydroxyl groups on the surface, and ESCA intensities. ESCA spectra suggest many functional groups to be thiuram disulfide ones and not DTC ones as believed before. Quantitative ESCA measurements show that aminosilylated silicagel surfaces are only partially transformed to the DTC form. In spite of their chemical instability, the concentration of heavy metal ions (Pb²⁺) in aqueous solution and their ESCA intensities after immobilization on the activated silicagel surface are linearily correlated with each other in the ppm region.Professor Dr. Carl Mahr zum 80. Geburtstag in Dankbarkeit gewidmet.     

Inorganic particulates in removal of toxic heavy metal ions

Adsorption behavior of zinc ions on hydrous zirconium oxide (HZO) in aqueous solution has been studied as a function of concentration (10^–2–10^–8M), temperature (303–333 K) and pH 3–8 of adsorptive solution applying radiotracer technique. The kinetics of adsorption follows first order rate law and agrees well with the classical Freundlich isotherm in the entire range of adsorptive concentration. The removal was found to be increasing with pH of the adsorptive solution while it was suppressed in the presence of acid concentrations. The overall process is found to be endothermic and irreversible in nature.     

Inorganic particulates in removal of toxic heavy metal ions

Adsorption behavior of zinc, cadmium and mercury ions on hydrous titanium oxide in aqueous solution has been studied as a function of concentration of the metal ion (10⁻²−10⁻⁷M), temperature (303–333 K) and pH 3–10 by applying radiotracer technique. The kinetics of adsorption follows the first order rate law and agrees well with the classical Freundlich isotherm. The removal was found to increase with increasing pH but was suppressed in the presence of EDTA. The overall process is endothermic and irreversible in nature. Part VII. Efficient removal of cadmium ions from aqueous solutions by hydrous manganese oxideS. P. Mishra, D. Tiwary, Radiochim. Acta, 80 (1998) 213.     

Inorganic particulates in removal of toxic heavy metal ions

The removal behavior of amorphous aluminum hydroxide for Hg(II) ions from aqueous solutions was investigated by employing a radiotracer technique at micro down to trace level concentrations. The batch type experiments were performed to obtain various physico-chemical parameters, viz., effect of sorptive concentration, temperature and pH. It was observed that the increase in sorptive concentration (from 1·10⁻⁸ to 1·10⁻² mol·dm⁻³), temperature (from 303 to 333K) and pH (from 3.4 to 10.3) apparently favored the uptake of Hg(II) by this solid. Similarly, the presence of anions (six fold) viz., oxalate, phosphate, glycine and EDTA also enhanced the uptake behavior of aluminum hydroxide for Hg(II). Whereas, the added cations viz., Na⁺, K⁺, Ba²⁺, Sr²⁺, Mg²⁺, Cd²⁺ and Fe³⁺ more or less suppressed the removal behavior of the adsorbent. Further, the adsorption process followed the classical Freundlich adsorption isotherm and deductions of various thermodynamic data revealed that the uptake of Hg(II) on aluminum hydroxide followed the ion-exchange type mechanism and thermodynamically it was found to be endothermic in nature. Part IX: Rapid and efficient removal of Hg(II) by hydrous manganese and tin oxides, J. Coll. Interf. Sci., 279 (2004) 61.     

Preconcentration of heavy metal ions on reversibly precipitated polymeric systems

A procedure is proposed for the preconcentration of heavy metal ions in the analysis of aqueous media. It consists in the addition of components of reversibly precipitated polymeric systems to the solution, and precipitation of the polymer-metal complex, followed by its dissolution upon changing of the medium’s acidity. The procedure is tested on model solutions of copper, zinc, and lead ions and their mixture (0.001–0.01 mg/L). It is found that the interpolymer complex of poly-N-vinylimidazole with polymethacrylic acid ensures the complete extraction of metal ions and their preconcentration of more than 30-fold.     

Interaction of heavy metal ions with ammonium humates

Sorption properties of ammonium humates with respect to Fe(III), Cu(II), Al(III), Ni(II), Pb(II), and Zn(II) are studied. The effect of the metal ion concentration on the ammonium humate consumption is examined and the corresponding dependences are analyzed using regression equations. The IR spectra of brown coal humic acids, ammonium humates, as well as Fe, Cu, Ni, Zn, Pb, and Al humates are presented.     

Optical sensors for determination of heavy metal ions

A review is given on optical means for single shot testing (probing) as well as continuous monitoring (sensing) of heavy metal ions (HMs). Following an introduction into indicator based approaches, we discuss the types of indicator dyes and polymeric supports used, as well as existing sensing schemes for HMs. The wealth of information is compiled in the form of tables and critically reviewed. Notwithstanding the tremendous work performed so far, it is obvious that still severe limitations do exist in terms of selectivity, limits of detection, dynamic ranges, applicability to specific problems, and reversibility. On the other hand, such sensors have found — and will find — their application whenever rapid and cost-effective testing is required, where personnel is scarce or unskilled, and in field tests. Despite their limitations, the number of such sensors (and of irreversible probes) for HMs is likely to increase in future.     

Adsorption behaviour of some metal ions and their oxinates on Zeokarb-226

Summary To develop a preconcentration technique for trace elements in aqueous solution, the adsorption behaviour of some metal ions and their oxinates on a weak carboxylic acid resin (Zeokarb-226) in the H⁺ form was investigated. Results indicate that under the conditions of the experiment, the resin behaves like a chelating ion-exchanger and that by selecting appropriate conditions, a group of ions such as U(VI), Th(IV), Pb(II), Hg(II), Fe(III) may be separated from many other ions.

---

Adsorptionsverhalten einiger Metallionen und ihrer Oxinate an Zeokarb-226

Zusammenfassung Das Adsorptionsverhalten einiger Metallionen und ihrer Oxinate an dem schwachen Carbonsäureharz Zeokarb-226 (H⁺-Form) wurde untersucht, um ein Anreicherungsverfahren für Spurenelemente in wäßriger Lösung zu entwickeln. Die Ergebnisse zeigen, daß sich das Harz unter den gegebenen Bedingungen als Chelataustauscher verhält und geeignet ist für die selektive Anreicherung von z.B. U(VI), Th(IV), Pb(II), Hg(II) und Fe(III).

     

Dynamic combinatorial libraries for the recognition of heavy metal ions

We present the use of hydrazone dynamic combinatorial libraries (DCLs) to identify macrocyclic receptors that are selective for alkaline earth metal ions over alkali metal ions. In particular, the toxic heavy metal ions Sr(2+) and Ba(2+) induce characteristic changes in the DCLs. Four macrocycles were isolated and characterised by LCMS, HRMS, NMR and X-ray crystallography; binding studies by UV-Vis spectroscopy confirm the selectivity observed in the DCLs.