Cobalt(III)‐Mediated Permanent and Stable Immobilization of Histidine‐Tagged Proteins on NTA‐Functionalized Surfaces

We present the cobalt(III)‐mediated interaction between polyhistidine (His)‐tagged proteins and nitrilotriacetic acid (NTA)‐modified surfaces as a general approach for a permanent, oriented, and specific protein immobilization. In this approach, we first form the well‐established Co²⁺‐mediated interaction between NTA and His‐tagged proteins and subsequently oxidize the Co²⁺ center in the complex to Co³⁺. Unlike conventionally used Ni²⁺‐ or Co²⁺‐mediated immobilization, the resulting Co³⁺‐mediated immobilization is resistant toward strong ligands, such as imidazole and ethylenediaminetetraacetic acid (EDTA), and washing off over time because of the high thermodynamic and kinetic stability of the Co³⁺ complex. This immobilization method is compatible with a wide variety of surface coatings, including silane self‐assembled monolayers (SAMs) on glass, thiol SAMs on gold surfaces, and supported lipid bilayers. Furthermore, once the cobalt center has been oxidized, it becomes inert toward reducing agents, specific and unspecific interactions, so that it can be used to orthogonally functionalize surfaces with multiple proteins. Overall, the large number of available His‐tagged proteins and materials with NTA groups make the Co³⁺‐mediated interaction an attractive and widely applicable platform for protein immobilization.     

Reversible Immobilization of Peptides: Surface Modification and In Situ Detection by Attenuated Total Reflection FTIR Spectroscopy

A generic method is described for the reversible immobilization of polyhistidine‐bearing polypeptides and proteins on attenuated total reflecting (ATR) sensor surfaces for the detection of biomolecular interactions by FTIR spectroscopy. Nitrilotriacetic acid (NTA) groups are covalently attached to self‐assembled monolayers of either thioalkanes on gold films or mercaptosilanes on silicon dioxide films deposited on germanium internal reflection elements. Complex formation between Ni²⁺ ions and NTA groups activates the ATR sensor surface for the selective binding of polyhistidine sequences. This approach not only allows a stable and reversible immobilization of histidine‐tagged peptides (His–peptides) but also simultaneously allows the direct in situ quantification of surface‐adsorbed molecules from their specific FTIR spectral bands. The surface concentrations of both NTA and His–peptide on silanized surfaces were determined to be 1.1 and 0.4 molecules nm^?2, respectively, which means that the surface is densely covered. A comparison of experimental FTIR spectra with simulated spectra reveals a surface‐enhancement effect of one order of magnitude for the gold surfaces. With the presented sensor surfaces, new ways are opened up to investigate, in situ and with high sensitivity and reproducibility, protein–ligand, protein–protein, protein–DNA interactions, and DNA hybridization by ATR–FTIR spectroscopy.     

Reversible immobilization of engineered molecules by Ni-NTA chelators

Electrochemical synthesis of nickel-nitrilotriacetic acid (Ni-NTA) chelators, for subsequent immobilization of (His)(6)-tagged proteins (Photosystem II (PSII) as model molecule), on Au or Au-graphite electrodes is compared to chemical synthesis. Results show: (i) higher Ni-NTA surface density, (ii) shorter treatment time (1-12 min vs. 16 h normally needed for self-assembled monolayer (SAM)), (iii) possibility of addressing the chelator to only one Au electrode, in a sensor micro-array.     

High‐Fidelity Protein Targeting into Membrane Lipid Microdomains in Living Cells

Lipid analogues carrying three nitrilotriacetic acid (tris‐NTA) head groups were developed for the selective targeting of His‐tagged proteins into liquid ordered (l_o) or liquid disordered (l_d) lipid phases. Strong partitioning into the l_o phase of His‐tagged proteins bound to tris‐NTA conjugated to saturated alkyl chains (tris‐NTA DODA) was achieved, while tris‐NTA conjugated to an unsaturated alkyl chain (tris‐NTA SOA) predominantly resided in the l_d phase. Interestingly, His‐tag‐mediated lipid crosslinking turned out to be required for efficient targeting into the l_o phase by tris‐NTA DODA. Robust partitioning into l_o phases was confirmed by using viral lipid mixtures and giant plasma membrane vesicles. Moreover, efficient protein targeting into l_o and l_d domains within the plasma membrane of living cells was demonstrated by single‐molecule tracking, thus establishing a highly generic approach for exploring lipid microdomains in situ.     

The Scaffold Design of Trivalent Chelator Heads Dictates Affinity and Stability for Labeling His‐tagged Proteins in vitro and in Cells

Small chemical/biological interaction pairs are at the forefront in tracing protein function and interaction at high signal‐to‐background ratios in cellular pathways. However, the optimal design of scaffold, linker, and chelator head still deserve systematic investigation to achieve the highest affinity and kinetic stability for in vitro and especially cellular applications. We report on a library of N‐nitrilotriacetic acid (NTA)‐based multivalent chelator heads (MCHs) built on linear, cyclic, and dendritic scaffolds and compare these with regard to their binding affinity and stability for the labeling of cellular His‐tagged proteins. Furthermore, we describe a new approach for tracing cellular target proteins at picomolar probe concentrations in cells. Finally, we outline fundamental differences between the MCH scaffolds and define a cyclic trisNTA chelator that displays the highest affinity and kinetic stability of all reported reversible, low‐molecular‐weight interaction pairs.     

Self-assembled monolayers containing terminal mono-, bis-, and tris-nitrilotriacetic acid groups: characterization and application

We have undertaken a structural and functional study of self-assembled monolayers (SAMs) formed on gold from a series of alkylthiol compounds containing terminal multivalent chelators (MCHs) composed of mono-, bis-, and tris-nitrilotriacetic acid (NTA) moieties. SAMs were formed from single-component solutions of the mono-, bis-, and tris-NTA compounds, as well as from mixtures with a tri(ethylene glycol)-terminated alkylthiol (EG(3)). Contact angle goniometry, null ellipsometry, and infrared spectroscopy were used to explore the structural characteristics of the MCH SAMs. Ellipsometric measurements show that the amount of the MCH groups on surfaces increases with increasing mol % of the MCH thiols in the loading solution up to about 80 mol %. We also conclude that mixed SAMs, prepared in the solution composition regime 0-30 mol % of the MCH thiols, consist of a densely packed alkyl layer, an amorphous ethylene glycol layer, and an outermost layer of MCH groups exposed toward the ambient. Above 30 mol %, a significant degree of disorder is observed in the SAMs. Finally, functional evaluation of the three MCH SAMs prepared at 0-30 mol% reveals a consistent increase in binding strength with increasing multivalency. The tris-NTA SAM, in particular, is enabled for stable and functional immobilization of a His6-tagged extracellular receptor subunit, even at low chelator surface concentrations, which makes it suitable for applications when a low surface density of capturing sites is desirable, e.g., in kinetic analyses.     

Cyclodextrin‐Modified Zeolites: Host–Guest Surface Chemistry for the Construction of Multifunctional Nanocontainers

The functionalization of nanoporous zeolite L crystals with β‐cyclodextrin (CD) has been demonstrated. The zeolite surface was first modified with amino groups by using two different aminoalkoxysilanes. Then, 1,4‐phenylene diisothiocyanate was reacted with the amino monolayer and used to bind CD heptamine by using its remaining isothiocyanate groups. The use of the different aminoalkoxysilanes, 3‐aminopropyl dimethylethoxysilane (APDMES) and 3‐aminopropyl triethoxysilane (APTES), led to drastic differences in uptake and release properties. Thionine was found to be absorbed and released from amino‐ and CD‐functionalized zeolites when APDMES was used, whereas functionalization by APTES led to complete blockage of the zeolite channels. Fluorescence microscopy showed that the CD groups covalently attached to the zeolite crystals could bind adamantyl‐modified dyes in a specific and reversible manner. This strategy allowed the specific immobilization of His‐tagged proteins by using combined host–guest and His‐tag‐Ni‐nitrilotriacetic acid (NTA) coordination chemistry. Such multifunctional systems have the potential for encapsulation of drug molecules inside the zeolite pores and non‐covalent attachment of other (for example, targeting) ligand molecules on its surface.     

Synthesis of an artificial cell surface receptor that enables oligohistidine affinity tags to function as metal-dependent cell-penetrating peptides

Cell-penetrating peptides and proteins (CPPs) are important tools for the delivery of impermeable molecules into living mammalian cells. To enable these cells to internalize proteins fused to common oligohistidine affinity tags, we synthesized an artificial cell surface receptor comprising an N-alkyl derivative of 3beta-cholesterylamine linked to the metal chelator nitrilotriacetic acid (NTA). This synthetic receptor inserts into cellular plasma membranes, projects NTA headgroups from the cell surface, and rapidly cycles between the plasma membrane and intracellular endosomes. Jurkat lymphocytes treated with the synthetic receptor (10 microM) for 1 h displayed approximately 8,400,000 [corrected]NTA groups on the cell surface. Subsequent addition of the green fluorescent protein AcGFP fused to hexahistidine or decahistidine peptides (3 microM) and Ni(OAc)(2) (100 microM) enhanced the endocytosis of AcGFP by 150-fold (hexahistidine fusion protein) or 600-fold (decahistidine fusion protein) within 4 h at 37 degrees C. No adverse effects on cellular proliferation or morphology were observed under these conditions. By enabling common oligohistidine affinity tags to function as cell-penetrating peptides, this metal-chelating cell surface receptor provides a useful tool for studies of cellular biology [corrected]     

Specific covalent immobilization of proteins through dityrosine cross-links

Dityrosine cross-links are widely observed in nature in structural proteins such as elastin and silk. Natural oxidative cross-linking between tyrosine residues is catalyzed by a diverse group of metalloenzymes. Dityrosine formation is also catalyzed in vitro by metal-peptide complexes such as Gly-Gly-His-Ni(II). On the basis of these observations, a system was developed to specifically and covalently surface immobilize proteins through dityrosine cross-links. Methacrylate monomers of the catalytic peptide Gly-Gly-His-Tyr-OH (GGHY) and the Ni(II)-chelating group nitrilotriacetic acid (NTA) were copolymerized with acrylamide into microbeads. Green fluorescent protein (GFP), as a model protein, was genetically tagged with a tyrosine-modified His6 peptide on its carboxy terminus. GFP-YGH6, specifically associated with the NTA-Ni(II) groups, was covalently coupled to the bead surface through dityrosine bond formation catalyzed by the colocalized GGHY-Ni(II) complex. After extensive washing with EDTA to disrupt metal coordination bonds, we observed that up to 75% of the initially bound GFP-YGH6 remained covalently bound to the bead while retaining its structure and activity. Dityrosine cross-linking was confirmed by quenching the reaction with free tyrosine. The method may find particular utility in the construction and optimization of protein microarrays.     

Development and Characterization of Nickel‐NTA‐Polyaniline Modified Electrodes

The engineered addition of hexa‐histidine sequences to biomolecules such as antibody fragments has been found to be an excellent means of purifying these materials. This tagging methodology has also been extended to its use as a tool for immobilization and orientation of antibodies on transducer surfaces. Polyvinyl sulfonate‐doped polyanilne (PANI/PVS) can be used as a mediator in amperometric biosensors. This short communication looks at the effect of nickel chelate materials and nickel chelation on this conducting polymer and evaluates it as a potential surface for the immobilization of his‐tagged biomolecules. N‐nitrilotriacetic acid (NTA) was doped into the electropolymerized PANI/PVS at a screen‐printed carbon paste electrode. The resulting NTA‐PANI/PVS film was shown to have comparable electrochemical properties of polymer without the chelating agent. When Ni²⁺ was applied to the electrode, the incorporated NTA was found to efficiently chelate the metal ions at the electrode surface.     

Immobilization of proteins on carboxylic acid functionalized nanopatterns

The immobilization of proteins on nanopatterned surfaces was investigated using in situ atomic force microscopy (AFM) and ex situ infrared reflectance–absorption spectroscopy (IRAS). The AFM-based lithography technique of nanografting provided control of the size, geometry, and spatial placement of nanopatterns within self-assembled monolayers (SAMs). Square nanopatterns of carboxylate-terminated SAMs were inscribed within methyl-terminated octadecanethiolate SAMs and activated using carbodiimide/succinimide coupling chemistry. Staphylococcal protein A was immobilized on the activated nanopatterns before exposure to rabbit immunoglobulin G. In situ AFM was used to monitor changes in the topography and friction of the nanopatterns in solution upon protein immobilization. Complementary studies with ex situ IRAS confirmed the surface chemistry that occurred during the steps of SAM activation and subsequent protein immobilization on unpatterned samples. Since carbodiimide/succinimide coupling chemistry can be used for surface attachment of different biomolecules, this protocol shows promise for development of other aqueous-based studies for nanopatterned protein immobilization.     

In‐Situ Spin Labeling of His‐Tagged Proteins: Distance Measurements under In‐Cell Conditions

New spin labeling strategies have immense potential in studying protein structure and dynamics under physiological conditions with electron paramagnetic resonance (EPR) spectroscopy. Here, a new spin‐labeled chemical recognition unit for switchable and concomitantly high affinity binding to His‐tagged proteins was synthesized. In combination with an orthogonal site‐directed spin label, this novel spin probe, Proxyl‐trisNTA (P‐trisNTA) allows the extraction of structural constraints within proteins and macromolecular complexes by EPR. By using the multisubunit maltose import system of E. coli: 1) the topology of the substrate‐binding protein, 2) its substrate‐dependent conformational change, and 3) the formation of the membrane multiprotein complex can be extracted. Notably, the same distance information was retrieved both in vitro and in situ allowing for site‐specific spin labeling in cell lysates under in‐cell conditions. This approach will open new avenues towards in‐cell EPR.     

Specific adsorption of histidine-tagged proteins on silica surfaces modified with Ni2+/NTA-derivatized poly(ethylene glycol)

Silica surfaces modified with nitrilotriacetic acid (NTA)-polyethylene glycol (PEG) derivatives were used to immobilize hexahistidine-tagged green fluorescent protein (His6-GFP), biotin/streptavidin-AlexaFluor555 (His6-biotin/SA-AF), and gramicidin A-containing vesicles (His6-gA). Three types of surface-reactive PEG derivatives-NTA-PEG3400-Si(OMe)3, NTA-PEG3400-vinylsulfone, and mPEG5000-Si(OMe)3 (control)-were grafted onto silica and tested for their ability to capture His6-tag species via His6/Ni2+/NTA chelation. The composition and thicknesses of the PEG-modified surfaces were characterized using X-ray photoelectron spectroscopy, contact angle, and ellipsometry. Protein capture efficiencies of the NTA-PEG-grafted surfaces were evaluated by measuring fluorescence intensities of these surfaces after exposure to His6-tag species. XPS and ellipsometry data indicate that surface adsorption occurs via specific interactions between the His6-tag and the Ni2+/NTA-PEG-grafted surface. Protein immobilization was most effective for NTA-PEG3400-Si(OMe)3-modified surfaces, with maximal areal densities achieved at 45 pmol/cm2 for His6-GFP and 95 fmol/cm2 for His6-biotin/SA-AF. Lipid vesicles containing His6-gA in a 1:375 gA/lipid ratio could also be immobilized on Ni2+/NTA-PEG3400-Si(OMe)3-modified surfaces at 0.5 mM total lipid. Our results suggest that NTA-PEG-Si(OMe)3 conjugates may be useful tools for immobilizing His6-tag proteins on solid surfaces to produce protein-functionalized surfaces.     

Reversible oriented immobilization of histidine-tagged proteins on gold surfaces using a chelator thioalkane

The reversible oriented immobilization of proteins on solid surfaces is a prerequisite for the investigation of molecular interactions at interfaces or the construction of supramolecular assemblies. We demonstrate a generally applicable method using a synthetic chelator thioalkane which can self-assemble on a gold surface via its thiol group. It exposes its nitrilotriacetic acid group which serves as a chelator for transition metal ions. Reversible binding of a F_ab fragment modified with a C-terminal hexahistidine extension was monitored in situ using surface plasmon resonance. The directed immobilization of proteins on surfaces opens new ways for structural investigations of proteins and the development of biosensors.     

Understanding the nonfouling mechanism of surfaces through molecular simulations of sugar-based self-assembled monolayers

This paper presents a molecular simulation study of the interactions of a protein (lysozyme) with self-assembled monolayers (SAMs) of mannitol and sorbitol terminated alkanethiols in the presence of explicit water molecules and ions. The all-atom simulations were performed to calculate the force generated on the protein as a function of its distance above the SAM surfaces. The structural and dynamic properties of water molecules both above the SAM surfaces and around the SAM head groups were analyzed to provide a better understanding of the nonfouling behavior of the sugar-based SAM surfaces. Results from this work suggest that both mannitol and sorbitol SAMs generate a tightly bound, structured water layer around the SAM chains. This hydration layer creates a repulsive force on the protein when it approaches the surface, resulting in a nonfouling surface despite the presence of hydrogen-bond donor groups. This work demonstrates the importance of strong surface-water interactions for surface resistance to nonspecific protein adsorption.     

Specifically and reversibly immobilizing proteins/enzymes to nitriolotriacetic-acid-modified mesoporous silicas through histidine tags for purification or catalysis

Six nitriolotriacetic-acid-modified ordered mesoporous silicas (NTA-OMPSs) with different pore sizes and surface features for specific and reversible protein immobilization were fabricated and characterized. Specific immobilization of a genetically engineered undecaprenyl pyrophosphate synthase (UPPs) from cell lysate and a chemically modified His-tagged horseradish peroxidase (HRP) in these Ni-NTA-OMPSs through histidine coordination to the nickelated NTA was demonstrated and confirmed by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry and sodium dodecyl sulfate polyacrylamide gel electrophoresis. Negligible leakage of these enzymes over a wide range of acidic conditions was observed. Moreover, histidine tags with different lengths (His6, His4, His3, and His2) applied to HRP were evaluated to find the minimum length for effective complexation. Enzymatic assessment studies indicated that the pore size of the OMPSs has minimal influence on the enzymatic activity, whereas chemical entities such as unreacted mercapto groups tailored on the interior surfaces of the OMPSs played certain roles in inhibiting the enzymatic activity and stability. On MCF-S-NTA, SBA-S-NTA, and film-S-NTA, which contained unreacted mercaptopropyl groups on the interior surface, immobilized His-tagged HRP showed lower catalytic activity and stability than on MCF-NTA, film-NTA, and SBA-NTA. Selective hydroxylation of optically pure L-tyrosine to (S)-2-amino-3-(3,4-dihydroxyphenyl)propanoic acid (L-DOPA) by the immobilized HRP was also demonstrated.     

Binding His-tagged Proteins to NTA Stripes Assembled in 2D DNA Scaffold

Histidine‐tagged proteins were bound onto nitrilotriacetic acid (NTA) stripes on a 2‐D DNA scaffold which involved a ssDNA‐NTA conjugate prepared by click chemistry.     

Assembled monolayers of Mo3S4(4+) clusters on well-defined surfaces

A class of inorganic monolayers formed by assembling the molybdenum-sulfur cluster, Mo3S4(4+), onto a well-defined Au(111) surface is presented. The monolayers have been comprehensively characterized by electrochemistry, X-ray photoelectron spectroscopy (XPS), and in situ scanning tunneling microscopy (in situ STM). The voltammetric data show strong reductive and oxidative desorption signals from Au-S interactions, supported by the presence of both S and Mo signals in XPS. In situ STM shows many small pits in the dense adlayers uniformly spread over the surface, which is a typical feature of self-assembled monolayers (SAMs) of alkanethiols. The density of the pits is ca. 23 (+/-5)% and is significantly higher than for straight-chain alkanethiol SAMs with a single -SH group. The pit shapes are irregular, suggesting multiple Au-S interactions from Mo3S4(4+). High resolution images disclose bright round spots of ca. 8 A diameter representing individual molecules in the SAM. This is the first example of in situ monolayer formation by a metal-chalcogenide cluster directly anchored onto the gold surface through core ligands and offers a simple way to prepare a new class of functionalized inorganic monolayers.     

Direct wiring of cytochrome c's heme unit to an electrode: electrochemical studies

A novel strategy for the immobilization of cytochrome c on the surface of chemically modified electrodes is demonstrated and used to investigate the protein's electron-transfer kinetics. Mixed monolayer films of alkanethiols and omega-terminated alkanethiols (terminated with pyridine, imidazole, or nitrile groups that are able to ligate with the heme) are used to adsorb cytochrome c to the surface of gold electrodes. The use of mixed films, as opposed to pure films, allows the concentration of adsorbed cytochrome to remain dilute and ensures a higher degree of homogeneity in their environment. The adsorbed protein is studied using electrochemical methods and scanning tunneling microscopy.     

Super‐Chelators for Advanced Protein Labeling in Living Cells

Live‐cell labeling, super‐resolution microscopy, single‐molecule applications, protein localization, or chemically induced assembly are emerging approaches, which require specific and very small interaction pairs. The minimal disturbance of protein function is essential to derive unbiased insights into cellular processes. Herein, we define a new class of hexavalent N‐nitrilotriacetic acid (hexaNTA) chelators, displaying the highest affinity and stability of all NTA‐based small interaction pairs described so far. Coupled to bright organic fluorophores with fine‐tuned photophysical properties, the super‐chelator probes were delivered into human cells by chemically gated nanopores. These super‐chelators permit kinetic profiling, multiplexed labeling of His₆‐ and His₁₂‐tagged proteins as well as single‐molecule‐based super‐resolution imaging.