The binary system PbO - BiVO4

Phase equilibria established in the PbO - BiVO₄ system over the whole component concentration range up to 1000°C have been investigated. A phase diagram has been constructed using DTA and XRD.      

High surface area nano-sized La0.6Ca0.4MnO3 perovskite powder prepared by low temperature pyrolysis of a modified citrate gel

Single phase nanocrystalline La_0.6Ca_0.4MnO₃ powder was synthesized by both the usual and a modified citrate gel precursor method, and the effects on the formation of homogeneous nano-sized powder with a perovskite structure were investigated. In the modified method, single phase La_0.6Ca_0.4MnO₃ powder with an average particle size of 17.2 nm was obtained when the powder was pyrolyzed at 520°C for 2 h. Its specific surface area was 40.7 m² g⁻¹, about 4-fold larger than that of powder made by the usual citrate gel method.      

The effect of calcium substitution on the afterglow of Eu2+/Dy3+ doped Sr4Al14O25

The effect of calcium substitution on the afterglow of tetrastrontium aluminate phosphors (Sr₄Al₁₄O₂₅:Eu²⁺, Dy³⁺) was investigated. A series of (Sr₁-_xCa_x)O⊎nAl₂O₃:Eu²⁺(1%), Dy³⁺(0.5%), with variation of calcium content (x = 0 − 1), were synthesized by a high temperature solid state reaction in a reducing atmosphere. The photoluminescence, persistent luminescence (afterglow), and lumen equivalents of these materials were studied and compared. It turned out that the afterglow properties of the phosphors were strongly dependent on the Sr/Ca ratio. As the Ca content increased, a phase transition and blue shift in emission spectra were observed.      

Density functional theory study of the photosensitization mechanisms of indigo

The triplet excited state properties and photosensitization mechanisms of indigo were investigated based on density functional theory calculations. The solvent effects on the photosensitization mechanisms of indigo have also been considered. The thermodynamic feasibility of the possible ¹O₂ and O₂·⁻-photogeneration pathways by triplet excited state indigo in different solvents was explored, in order to gain some deeper insights into the photosensitization characters of the dye.      

Synthesis of lead-based 1212 and 3212 superconductors by an aqueous sol-gel method

The aqueous sol-gel synthesis technique for the preparation of (Pb,Sr)Sr₂(Y,Ca)Cu₂O_7±x (Pb-1212) and (Pb₂,Cu)Sr₂(Y,Ca)Cu₂O_8±x (Pb-3212) superconductors using two different complexing agents, namely 1,2-ethanediol and tartaric acid was studied. The phase transformations, composition and micro-structural features in the polycrystalline samples were studied by powder X-ray diffraction analysis (XRD), infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). XRD analysis of the ceramic samples obtained by calcination of Pb-Sr-Y-Ca-Cu-O acetate-glycolate precursor gels in air, for 10 hours at 800°C and at 825°C, showed the presence of homogeneous Pb-1212 and Pb-3212 crystallites as major phases. The XRD patterns of the ceramics obtained from Pb-Sr-Y-Ca-Cu-O acetate-tartrate precursor gels, however, showed multiphasic character. The critical temperature of superconductivity (T_C (onset)) observed by resistivity measurements were found to be 91 K and 75 K for Pb-1212 and Pb-3212 samples, respectively.      

Preparation of nanostructured porous SiO2-Al2O3 oxycarbonitride materials obtained by a new chemical precursor method

Nanostructured hybrid materials containing Al₂O₃ were synthesized via a sol-gel method through hydrolysis and co-condensation reactions using trimethylsilyl isocyanate (TMSI) as a new silica source in the presence of tetramethoxysilane (TMOS) and three different quantities (10, 20 and 30 wt.%) of aluminum sec-butoxide (Al(OBu^sec)₃ as a modifying agent. The xerogel nanostructured materials are pyrolyzed in nitrogen atmosphere in the temperature range from 400°C to 1100°C. The transformation of the xerogel hybrid networks into Al-Si oxycarbonitride materials has been investigated by XRD, FTIR, SEM, AFM, and ²⁹Si MAS-NMR. To the best of our knowledge, the work reported here is the first synthesis of porous di-urethanesils modified with aluminum and one of the few examples of alumosilica oxycarbonitride materials      

Subsolidus area of the system CdO - V2O5 - Fe2O3

Phase diagrams in the subsolidus area of the systems FeVO₄ - CdO and FeVO₄ - Cd₂V₂O₇ have been deduced using the results of XRD and DTA analyses. On the basis of these diagrams and some additional verifying research, a projection of the subsolidus area of the CdO - V₂O₅ - Fe₂O₃ system onto the plane that comprises the components’ concentration triangle has been presented. The H-type phase is the only phase formed in this system. It co-exists at equilibrium with other phases in six subsidiary subsystems.      

ZrOCl<Subscript>2</Subscript> · 8H<Subscript>2</Subscript>O: An efficient catalyst for rapid one-pot synthesis of 3-carboxycoumarins under ultrasound irradiation in water

In this report, a rapid, efficient and environmental friendly synthesis of 3-carboxycoumarins under ultrasound irradiation in water media is described. The Knoevenagel condensation of Meldrum’s acid with substituted benzaldehydes in the presence of zirconium oxide chloride (ZrOCl₂·8H₂O) and ultrasonic irradiation in water gave the corresponding 3-carboxycoumarins in good to excellent yields.      

Low temperature synthesis and characterization of Mn3O4 nanoparticles

Heating hydrous manganese (II) hydroxide gel at 85 °C for 12 hours produces Mn₃O₄ nanoparticles. They were characterized by X-ray powder diffraction (XRD) and infrared spectroscopy (FTIR). The particle size estimated from the SEM and X-ray peak broadening is approximately 32 nm, showing them to be nanocrystalline. EPR measurements confirm a typical Mn²⁺signal with a highly resolved hyperfine structure.      

A hydroxyaminophosphane derived from 2-imidazolidone and its unusual structure in solution

A novel hydroxyamino phosphane was synthesised through the reaction of 2-imidazolidinone with ClPPh2 and subsequently reaction of the resulting bisphosphino derivative with the Grignard reagent BrMgC₅H₁₁. The interaction of the pentyl substituent with one of the two phosphino groups and the structure in solution is shown by multinuclear NMR-spectroscopy..      

A green chemical route for the synthesis of Mn3O4 nanoparticles

A novel environmental friendly, room temperature route using an ionic liquid 1-n-butyl-3-methylimidazolium hydroxide ([BMIM]OH) for the synthesis of Mn₃O₄ nanoparticles is presented. The product was characterized using Fourier transform infrared spectroscopy, X-ray powder diffraction, and transmission electron microscopy. Phase purity was confirmed by XRD, and X-ray line profile fitting determined a crystallite size of 42 ± 11 nm. TEM analysis revealed various morphologies. EPR measurements have indicated the existence of long-range interactions, due to the wide range of particle sizes and morphologies observed.      

The effect of substituents of immobilized Rh complexes on the asymmetric hydrogenation of acetophenone derivatives

Using a modified Augustine’s method variously substituted Rh complexes were anchored on Al₂O₃ support. The prepared catalysts were characterized by spectroscopic methods and were applied in the hydrogenation of several acetophenone derivatives (p-CF₃-acetophenone, acetophenone, p-NH₂-acetophenone). Enantioselective C=O hydrogenations were observed with reasonable activity and selectivity on all heterogenized complexes, e.e. up to 80%. At the same time the immobilized samples showed the advantages of the heterogeneous systems: easy handling and recyclability.      

Sol-gel bioactive glass-ceramics Part I: Calcium phosphate silicate/wollastonite glass-ceramics

In this work we present experimental results about synthesis, structure evolution and in vitro bioactivity of new calcium phosphate silicate/wollastonite (CPS/W) glass-ceramics. The samples obtained were synthesized via polystep sol-gel process with different Ca/P+Si molar ratio (R). The structure of the materials obtained was studied by XRD, FTIR spectroscopy and SEM. XRD showed the presence of Ca₁₅(PO₄)₂(SiO₄)₆, β-CaSiO₃ and α-CaSiO₃ for the sample with R=1.89 after thermal treatment at 1200°C/2h. The XRD results are in good agreement with FTIR analysis. SEM denotes that apatite formation can be observed after soaking in simulated body fluid (SBF).      

Sol-gel bioactive glass-ceramics Part II: Glass-ceramics in the CaO-SiO2-P2O5-MgO system

Ceramics, with basic composition based on the CaO-SiO₂-P₂O₅-MgO system with different Ca+ Mg/P+Si molar ratio (R), were prepared via polystep sol-gel technique. The structure of the obtained ceramic materials has been studied by XRD, FTIR spectroscopy, and SEM. X-ray diffraction showed the presence of akermanite and HA for the sample with R = 1.68 and Mg substituted β-TCP and silicocarnotite for the sample with R = 2.16, after thermal treatment at 1200°C/2 h. The obtained results are in good agreement with FTIR. In vitro test for bioactivity in static condition proved that the carbonate containing hydroxyapatite (CO₃HA) can be formed on the surface of the synthesized samples. CO₃HA consisted of both A- and B-type CO₃²⁻ ions. SEM micrographs depicted different forms of HA particles, precipitated on the surface after soaking in 1.5 simulated body fluid (SBF).      

Methylcellulose/SiO<Subscript>2</Subscript> hybrids: sol-gel preparation and characterization by XRD,FTIR and AFM

Methylcellulose (MC) / SiO₂ organic / inorganic hybrid materials have been prepared from MC and methyltriethoxysilane or ethyltrimethoxysilane, and characterized by XRD, FTIR and AFM. XRD showed peak shifts. FTIR shows intermolecular hydrogen bonding between MC and SiO₂. AFM depicts surface roughness which depends on the silica precursor and MC content.      

Theoretical determination of the favorable mechanism of the reaction between AlX and HX (X = Br, Cl, and F)

The reaction mechanism between AlX and HX (X = Br, Cl, and F) have been characterized in detail using DFT as well as the ab initio method. The reaction yielding AlX₃ and molecular hydrogen was calculated to be highly exothermic. The present calculations also show that the possible routes to the trihalides species start more favorable with the primary insertion product AlX₂H than with the biadduct AlX(HX)₂ one.      

Thermal synthesis and characterization of Al χ La1-χ P3O9

New binary lanthanum-aluminum triphosphates were synthesized by thermal-condensation method from H₃PO₄, La₂O₃ and Al(OH)₃. These pigments could be potentially used as special inorganic pigments; their corrosion-inhibition properties were widely studied. Synthesis conditions were determined on the basis of DTA and TG measurements. The products were also characterized by X-ray diffraction analysis. Physical properties — density by pycnometric method, particle size distribution, oil number and critical pigment volume concentration (CPVC), pH and specific conductivity of their aqueous extracts were also determined.      

Macrocyclic host cyclophosphazenes from aminolysis of N3P3CI6 by bis-(2-ortho-aminophenoxyethyl)ether

Aminolysis of N₃P₃CI₆ by an oxodiamine, bis-(2-ortho-aminophenoxyethyl) ether, has been carried out under various experimental conditions and new products with different architectures have been obtained. The reaction in diethyl ether when using a Na₂CO₃-water interface process gives the mono-BINO as major product. Reaction on Al₂O₃/KOH leads to the spirocyclic compound, while, when the reaction is carried out in toluene in the presence of NEt₃, a mixture of mono- and di-BINO products are obtained. These new products have been characterized by IR, ¹H and ³¹P NMR spectroscopy.      

Cadmium ions and cadmium sulphide particles in γ-titanium dihydrogen phosphate. Synthesis, thermal behaviour and X-ray characterization

Layered compounds with CdS particles supported on the ion-exchanger, γ-titanium dihydrogen phosphate, were prepared by the stepwise reaction of the ion-exchanger and cadmium solution, followed by reaction with H₂S gas. The CdS content on the ion-exchanger is dependent on the timeframe of the H₂S gas flow. The materials obtained were layered, as shown by the X-ray measurements that exhibit both precursor and CdS diffraction peaks. The thermal treatment of the material obtained gives evidence of its stability (≤ 320°C) before the CdS decomposition, which occurs in a single step.      

Preliminary results of a quick,simple method of detecting antimony in water samples

Preliminary results of development of a direct and fast method of determination of antimony in samples of tap water using GFAAS are presented. The found levels of antimony were lower than permitted for human consumption. A mixture of Pd and Mg(NO₃)₂ (concentrations in the injected solution: 8.6 μg mL⁻¹ and 5.8 μg mL⁻¹ respectively) was used as the chemical modifier. The pyrolysis and atomization temperatures were 1000 and 1700°C, respectively and the mean analytical recovery 98.2%.