A magnetic metal-organic framework as a new sorbent for solid-phase extraction of copper(II), and its determination by electrothermal AAS

We report on the synthesis of Fe₃O₄-functionalized metal-organic framework (m-MOF) composite from Zn(II) and 2-aminoterephthalic acid by a hydrothermal reaction. The magnetic composite is iso-reticular and was characterized by FTIR, X-ray diffraction, SEM, magnetization, and TGA. The m-MOF was then applied as a sorbent for the solid-phase extraction of trace levels of copper ions with subsequent quantification by electrothermal AAS. The amount of sorbent applied, the pH of the sample solution, extraction time, eluent concentration and volume, and desorption time were optimized. Under the optimum conditions, the enrichment factor is 50, and the sorption capacity of the material is 2.4 mg g^?1. The calibration plot is linear over the 0.1 to 10 μg L^?1 Cu(II) concentration range, the relative standard deviation is 0.4 % at a level of 0.1 μg L^?1 (for n?=?10), and the detection limit is as low as 73 ng L^?1. We consider this magnetic MOF composite to be a promising and highly efficient material for the preconcentration of metal ions.

Electrochemical investigation of the interaction between lysozyme-shelled microbubbles and vitamin C

We report loading of vitamin C (ascorbic acid) on to lysozyme-shelled microbubbles. The interaction between lysozyme-shelled microbubbles and vitamin C was studied by use of cyclic and differential pulse voltammetry, zeta potential measurements, and scanning electron microscopy. The effect of microbubbles on electrochemical measurement of ascorbic acid was evaluated. The linear range for ascorbic acid obtained for differential pulse measurement in the presence of 1 mg mL^?1 microbubbles was 1–50 μmol L^?1 (y?=?0.067x?+?0.130, r ²?=?0.995), with a detection limit of 0.5 μmol L^?1. The experimental conditions, i.e., pH and ionic strength, were optimized to improve the interaction between ascorbic acid and lysozyme-shelled microbubbles. The results were satisfactory when the interaction was performed for 1 h in aqueous solution at pH 6. The amount of vitamin C loaded on the microbubbles (90 % of the analyte added, RSD _inter-expt. = 3 %, n?=?6) and the stability of microbubbles–ascorbic acid complex (until 72 h at 25 °C) were also evaluated by use of differential pulse voltammetry and zeta potential measurements.

A colorimetric probe for ascorbic acid based on copper-gold nanoparticles in electrospun nylon

We report on a colorimetric probe based on copper-gold alloy nanoparticles (NPs). The probe is capable of selectively detecting ascorbic acid (AA) as a result of the distance-dependent colour change of the nanoparticles immobilized in an electrospun nylon-6 nanofiber. The resulting white nanofibres undergo a colour change to blue as a result of the aggregation of the NPs induced by AA in the pH range 2–7. The probe is selective for AA even in the presence of dopamine, uric acid, saccharides, amino acids and certain organic acids. It covers the 1.76 x10^?2 mg L^?1 to 1.76 x10⁵ mg L^?1 concentration range, and exhibits a limit of detection of 1.76 x10^?2 mg L^?1 based on visual detection. Its application was demonstrated by the determination of ascorbic acid in fruit juices, urine, serum, and vitamin C tablets.

Micellar Aggregation Behavior and Electrochemically Reversible Solubilization of a Redox-Active Nonionic Surfactant

For the purpose of studying the potential of a novel nonionic switchable surfactant, 11-ferrocenylundecyl polyoxyethylene ether (FPEG), applied to surfactant-enhanced remediation (SER), the surface properties and micelle solubilization behavior of FPEG were investigated with different inorganic salts. With the addition of inorganic salts (NaCl and CaCl₂), the critical micelle concentration (CMC) of FPEG dropped from 15 to 12 and 8 mg·L^?1, respectively, due to the salting-out effect on the alkyl chain. Thermodynamic parameters based on the CMCs indicated that micelle formation was an entropy-driven process. Dynamic light scattering measurements verified that these inorganic salts can decrease the hydrodynamic diameters (D _h) of the micelles. Solubilization experiments with three typical polycyclic aromatic hydrocarbons (PAHs) demonstrated that the system of FPEG with NaCl shows the highest solubilization ability, and the molar solubilization ratio and micelle–water partition coefficient (K _m ) values follow the order pyrene > phenanthrene > acenaphthene. After oxidation, PAHs can be released from the micelles through breaking up of the micelles, and the cumulative release efficiency of pyrene, phenanthrene and acenaphthene are 31.2, 42.8 and 44.6 %; the order of release efficiency is opposite to that of the reduced form for solubilization abilities. All the results suggest that the ferrocene-containing, redox-active surfactant FPEG has the potential to be recycled in SER technology through electrochemistry approaches.     

Preconcentration of ultra-trace amounts of iron and antimony using ion pair solid phase extraction with modified multi-walled carbon nanotubes

Ion pair solid phase extraction was applied to the simultaneous preconcentration of iron and antimony. The ion pairs consisting of FeCl₄ ^? or SbCl₄ ^? anions and the benzyldimethyltetradecyl ammonium cation were formed on the surface of multi-walled carbon nanotubes, then eluted with nitric acid, and the elements finally quantified by ETAAS. The adsorption capacities of the impregnated MWCNTs are 9.2 mg g^?1 for iron and 27.5 mg g^?1 for antimony. The following analytical figures of merit were determined for iron and antimony, respectively: Enrichment factors of 210 and 230, assay precisions of ±5.3 % and ±4.8 %, linear calibration plots from 0.7 to 9.4 and 13.0 to 190 ng L^?1, and detection limits of 0.17 and 3.5 ng L^?1. The method was applied to the determination of iron and antimony in human hair, synthetic sample, and to the certified reference materials gold ore (MA-1b) and trace elements in water (SRM 1643d).

Fragment-imprinted microspheres for the extraction of sulfonamides

Fragment-imprinted microspheres (FIMs) were synthesized by suspension polymerization of 4-sulfa-6-chloropyrimidine (the template), methacrylic acid and styrene (the mixed functional monomers), divinylbenzene (the crosslinker), and azobisisobutyronitrile (the initiator). The optimum conditions were obtained by an orthogonal experiment. After removal of the templates, the microspheres serve as a material to fairly specifically bind sulfonamides, the absorption capacity being 6.32 mg g^–1, whereas the absorption by non-imprinted microspheres is 1.68 mg g^?1. A method was worked out for the simultaneous determination of five sulfonamides by solid phase extraction (using the FIMs) coupled to HPLC, and applied to analyze milk samples. The recoveries are within 87.6 and 96.5 %, with relative standard deviations between 1.25 and 2.89 %.

Miniaturized and green method for determination of chemical oxygen demand using UV-induced oxidation with hydrogen peroxide and single drop microextraction

We report on a green method for the determination of low levels of chemical oxygen demand. It is based on the combination of (a) UV-induced oxidation with hydrogen peroxide, (b) headspace single-drop microextraction with in-drop precipitation, and (c) micro-turbidimetry. The generation of CO₂ after photolytic oxidation followed by its sequestration onto a microdrop of barium hydroxide gives rise to a precipitate of barium carbonate which is quantified by turbidimetry. UV-light induced oxidation was studied in the absence and presence of H₂O₂, ultrasound, and ferrous ion. Determinations of chemical oxygen demand were performed using potassium hydrogen phthalate as a model compound. The optimized method gives a calibration curve that is linear between 3.4 and 20 mg L^?1 oxygen. The detection limit was 1.2 mg L^?1 of oxygen, and the repeatability (as relative standard deviation) was around 5 %. The method was successfully applied to the determination of chemical oxygen demand in different natural waters and a synthetic wastewater.

Determination of soy proteins in food samples by dispersive solid-phase immunoextraction and dynamic long-wavelength fluorometry

We report on a method for the determination of soy proteins in food samples via dispersive solid-phase immunoextraction using gold-coated magnetic nanoparticles (NPs) as a support. Soy proteins were first extracted using anti-soy protein antibodies immobilized on the NPs, and then quantified by measuring the increase in fluorescence of the long-wavelength fluorophore cresyl violet in the presence of the anionic surfactant sodium dodecyl sulfate at neutral pH in a flow system. The method involves the use of two standard or sample aliquots. The fluorescence intensity of one aliquot is directly measured whereas that of the other aliquot is measured after immunoextraction. The difference between the peak heights of both aliquots serves as the analytical information that is directly proportional to the protein concentration. The limit of detection is 0.35 mg L^?1, the linear range is from 1 to 15 mg L^?1, and the relative standard deviation is <?5 %. Proteins such as bovine serum albumin and globulins do not interfere at the same concentration level. The method was applied to the analysis of soy-based beverages and gave recoveries in the range between 80.0 and 107.3 %.

Microextraction by packed sorbents combined with surface-enhanced Raman spectroscopy for determination of musk ketone in river water

Microextraction by packed sorbents (MEPS) combined with Surface-enhanced Raman spectroscopy (SERS) was investigated, and applied to the determination of musk ketone (MK) in river water samples. The full MEPS–SERS method includes analyte enrichment by MEPS preconcentration with C₁₈ sorbent followed by SERS detection supported by silver nanoparticles. An eluent drop containing the analyte is deposited directly from the MEPS syringe on a CaF₂ glass plate. When the drop has dried, a specific volume of silver nanoparticles solution is added on it before each SERS measurement. Several experimental variables were studied in depth; under the optimum experimental conditions MK can be extracted from a 500 μL sample with recoveries in the range 47–63 %. The limit of detection was 0.02 mg L^?1 and the relative standard deviation 15.2 % (n?=?4). Although not investigated in this work, the proposed method might be suitable for in-situ monitoring, because of the portability of the Raman spectrometer used.

Magnetic titanium oxide nanoparticles for hemimicelle extraction and HPLC determination of organophosphorus pesticides in environmental water

We report on a method for the extraction of organophosphorus pesticides (OPPs) from water samples using mixed hemimicelles and magnetic titanium dioxide nanoparticles (Fe₃O₄@TiO₂) modified by cetyltrimethylammonium. Fe₃O₄@TiO₂ nanoparticles were synthesized by a hydrothermal process and then characterized by scanning electron microscopy and Fourier transform IR spectrometry. The effects of the quantity of surfactant, extraction time, desorption solvent, pH value, extraction volume and reuse of the sorbent were optimized with respect to the extraction of OPPs including chlorpyrifos, dimethoate, and trichlorfon. The extraction method was applied to analyze OPPs in environmental water using HPLC along with UV detection. The method has a wide linear range (100–15,000 ng L^?1), good linearity (r?>?0.999), and low detection limits (26–30 ng L^?1). The enrichment factor is ~1,000. The recoveries (at spiked levels of 100, 1,000 and 10,000 ng L^?1) are in the range of 88.5–96.7 %, and the relative standard deviations range from 2.4 % to 8.7 %.

A metal-organic framework sustained by a nanosized Ag12 cuboctahedral node for solid-phase extraction of ultra traces of lead(II) ions

We show that a metal-organic framework (MOF) sustained by a nanosized Ag12 cuboctahedral node can be applied to selectively extract traces of lead(II) ion from environmental water samples. The MOF was characterized by thermogravimetric and differential thermal analysis, scanning electron microscopy, FTIR, and X-ray diffraction. The effects of pH value, flow rates, of type, concentration and volume of the eluent, of break-through volume and potentially interfering ions on the separation and determination of lead were evaluated. Following desorption with EDTA, Pb(II) was quantified by FAAS. The use of the MOF results in excellent analytical figures of merit including an analytical range from 2 to 180 μg L^?1 of Pb(II) (R²?>?0.99); a limit of detection of 500 ng L^?1; an adsorption capacity of 120 mg g^?1; an extraction efficiency of >95 %, and a relative standard deviation of <4 % (for eight separate column experiments).

Determination and pharmacokinetic study of the diacid metabolite of norcantharidin in beagle plasma by use of liquid chromatography–tandem mass spectrometry

Because norcantharidin (NCTD) is unstable and subject to ring opening and hydrolysis, the diacid metabolite of norcantharidin (DM-NCTD) is the stable form of NCTD found in normal saline solution. Conversion of NCTD to DM-NCTD is almost 100 %, making it possible to determine and investigate the pharmacokinetics of DM-NCTD converted from NCTD. In this paper, a sensitive, simple and selective liquid chromatographic–tandem mass spectrometric method was developed and validated for determination of DM-NCTD in beagle plasma. DM-NCTD was detected in multiple-reaction monitoring (MRM) mode by using the dehydrated ion 169.3 as precursor ion and its product ion 123.1 as the detected ion. Ribavirin was used as internal standard and detected in MRM mode by use of precursor ions, resulting in a product ion transition of m/z 267.1?→?135.1. This method was successfully used for a pharmacokinetic study of DM-NCTD in beagles after intravenous administration of DM-NCTD in normal saline solution at doses of 0.39, 0.78, and 1.6 mg kg^?1. DM-NCTD had dose-dependent kinetics across the dosage range investigated, with enhanced T _1/2α and AUC_0-12 and apparently decreasing V _d and CL with increasing dosage. After single-dose administration, T _1/2α ranged from 0.20 to 0.55 h, AUC_0-12 from 1.81 to 43.6 μg mL^?1 h^?1, V _d from 228 to 55.9 mL kg^?1, and CL from 220 to 36.5 mL kg^?1 h^?1 (P?<?0.01). The results indicated nonlinear pharmacokinetic behavior of DM-NCTD in beagles, suggesting that the risk of DM-NCTD in normal saline solution intoxication may be non-proportionally increased at higher doses.

Separation and preconcentration of trace quantities of copper ion using modified alumina nanoparticles, and its determination by flame atomic absorption spectrometry

We report on a sensitive, reliable and relatively fast method for separation, preconcentration and determination of trace quantities of copper(II) ion. It is making use of nanometer-sized γ-alumina nanoparticles modified with sodium dodecyl sulfate (SDS). The adsorptive potential was assessed via a Langmuir isotherm and the maximal sorption capacity was found to be 138 mg g^-1. The effects of pH values, amount of ligand, flow rate, type of eluting agent, volume of eluent, and the volume of sample were examined. The effects of interfering ions on the recovery of the analyte were also investigated. Copper ion was then determined by flame atomic absorption spectrometry. The relative standard deviation for five replicate determinations (at 50 μg L^?1 of copper) is 3.3%. The detection limit (at 3 s) is 2.5 μg L^?1. This method was validated with a certified reference material of oyster tissue (NIST SRM 1566b) and the results coincided well with the certified values. The procedure was successfully applied to the determination of Cu in water and food samples.

Preparation of MIP grafts for quercetin by tandem aryl diazonium surface chemistry and photopolymerization

The food antioxidant quercetin was used as a template in an ultrathin molecularly imprinted polymer (MIP) film prepared by photopolymerization. Indium tin oxide (ITO) plates were electrografted with aryl layers via a diazonium salt precursor bearing two terminal hydroxyethyl groups. The latter act as hydrogen donors for the photosensitizer isopropylthioxanthone and enabled the preparation of MIP grafts through radical photopolymerization of methacrylic acid (the functional monomer) and ethylene glycol dimethacrylate (the crosslinker) in the presence of quercetin (the template) on the ITO. The template was extracted, and the remaining ITO electrode used for the amperometric determination of quercetin at a working potential of 0.26 V (vs. SCE). The analytical range is from 5.10^?8 to 10^?4 mol L^?1, and the detection limit is 5.10^?8 mol L^?1.

Development and validation of a LC/TOF MS method for the determination of carboplatin and paclitaxel in nanovesicles

Carboplatin and paclitaxel co-loaded nanovesicles (CPT-PTX-CLV), a novel intravenous formulation void of cremophor EL, may have significant advantages over conventional carboplatin and paclitaxel formulations with respect to tumor targeting, sustained drug release, reduced toxicity, and synergistic efficacy profiles. The aim of this study was to develop and validate a rapid, specific, sensitive, and reliable liquid chromatography–time of flight–mass spectrometry (LC/TOF MS)-based bioanalytical method for the simultaneous quantification of CPT and PTX in a fetal bovine serum (FBS) vehicle containing the dispersed nanovesicles. The analytes were extracted from FBS by simple protein precipitation, with subsequent separation of CPT and PTX on a Waters HPLC SunFire C₁₈ column at a flow rate of 0.25 ml/min using gradient elution mode. The total analytical time was only 12 min. Detection and quantitation was performed by electrospray ionization (ESI) in the positive ionization mode with selective ion monitoring (SIM) at m/z 310.0152 for CPT and 876.3224 for PTX. The calibration curves were linear over the concentration range of 10–4,000 ng/ml for CPT and 5–2,000 ng/ml for PTX (r ² ?>?0.99), with the respective lower limit of quantification (LLOQ) at 10 and 5 ng/ml. The intra- and inter-day precision and accuracy of analysis of the quality control samples at low, medium, and high concentration levels were ≤13.6 % relative standard deviation (RSD) and ≤14.6 % relative errors (RE). The rapid, sensitive, and reproducible LC/TOF MS method may be used to support preclinical and clinical pharmacological studies of the CPT-PTX-CLV administered by injection in animal and human cancer models.

Electrochemically controlled solid-phase micro-extraction of proline using a nanostructured film of polypyrrole, and its determination by ion mobility spectrometry

We report on a fast, simple and accurate method for the determination of proline in urine samples by employing a nanostructured film of conducting polypyrrole for electrochemically controlled solid-phase microextraction, and ion mobility spectrometry (IMS) for detection. This method has the advantages of simple sample preparation and a sensitivity of IMS to proline that is higher than that for other amino acids. The calibration curve is linear in the range of 0.5–60 μg L^?1 (4–521 nmol L^?1), and the detection limit is 0.2 μg L^?1. The electrochemical potentials for uptake and release were optimized. The method was successfully applied to the clean-up and quantitation of trace amounts of proline in urine samples.

Polythiophene-coated Fe3O4 nanoparticles as a selective adsorbent for magnetic solid-phase extraction of silver(I), gold(III), copper(II) and palladium(II)

We have developed a fast method for sensitive extraction and determination of the metal ions silver(I), gold(III), copper(II) and palladium(II). Fe₃O₄ magnetic nanoparticles were modified with polythiophene and used for extraction the metal ions without a chelating agent. Following extraction, the ions were determined by flow injection inductively coupled plasma optical emission spectrometry. The influence of sample pH, type and volume of eluent, amount of adsorbent, sample volume and time of adsorption and desorption were optimized. Under the optimum conditions, the calibration plots are linear in the 0.75 to 100 μg L^?1 concentration range (R²?>?0.998), limits of detection in the range from 0.2 to 2.0 μg L^?1, and enhancement factors in the range from 70 to 129. Precisions, expressed as relative standard deviations, are lower than 4.2 %. The applicability of the method was demonstrated by the successful analysis of tap water, mineral water, and river water.

Solid-phase preconcentration of cadmium(II) using amino-functionalized magnetic-core silica-shell nanoparticles, and its determination by hydride generation atomic fluorescence spectrometry

We report on the synthesis and evaluation of aminated-CoFe₂O₄/SiO₂ nanoparticles that can serve as a selective solid-phase sorbent for the extraction of cadmium ion. The nanoparticles consist of a magnetic CoFe₂O₄ core and an amino-modified silica shell. They can efficiently extract cadmium(II) ion and then can be isolated from the sample solution due to the magnetic nature of the core. The effects of the experimental conditions on the extraction process were optimized. Cadmium was then quantified by hydride generation atomic fluorescence spectrometry. The resulting calibration curve is linear in the concentration range of 0.01–10 μg?L^?1, the instrumental detection limits (3σ) is 3.15 ng?L^?1 and the relative standard deviation is 4.9 % at the 1.0 μg?L^?1 level (for n?=?11). The enrichment factor is 50 (for 50 mL samples), and the adsorbent can be used for at least 45 cycles of preconcentration and elution. The method was applied to the determination of cadmium in environmental water samples, and successfully validated by analyzing two certified reference materials.

Graphene oxide functionalized magnetic nanoparticles as adsorbents for removal of phthalate esters

We show that magnetic nanoparticles can be functionalized with graphene oxide (GO-MNPs) in two reaction steps, and that such nanoparticles can be used as adsorbents for the removal of phthalate esters (PAEs) from water samples. The GO-MNPs were characterized by scanning electron microscopy, transmission electron microscopy, Fourier-transform infrared spectroscopy, zeta potential, and vibrating sample magnetometer. The impacts of contact time, sample pH, ionic strength and sample volume on the adsorption process were investigated. The maximum adsorption capacity for diethyl phthalate was calculated to be 8.71 mg g^?1 according to the Langmuir adsorption isotherm. The adsorption efficiency was tested by removal of PAEs. More than 99 % of the total quantity of PAEs (0.12 mg L^?1) in 500 mL real water samples can be removed when GO-MNPs (275–330 mg) were used as an adsorbent. In addition, other species (estriol and fluorene) containing benzene rings were also almost completely removed with the PAEs using GO-MNPs, indicating that GO-MNPs are suitable for the removal of the species containing π-electron system through π-π interactions.

Preparation and phenol-recognizing ability of a poly(methacrylic acid) molecular imprint on the surface of a silica gel

Molecularly imprinted solid phase extraction is an excellent tool for the preconcentration of trace analytes. We report on the preparation of such a material by firstly graft-polymerizing methacrylic acid onto the surface of silica gel particles, and then imprinting it by using phenol as a template and ethylene glycol diglycidyl ether as a crosslinker. The binding and recognition of phenol were examined by static methods. The binding capacity at saturation is 160?mg·g^?1 in 9?h at pH 6. The selectivity coefficients relative to o-cresol and chlorophenol are 22 and 23, respectively. The pH value has a large effect. Adsorbed phenol can be eluted easily from the imprint with diluted sodium hydroxide solution, and the material is reusable.