Synthesis and characterization of dendrons and dendrimers skeleton-constructed with azobenzene moiety

A series of dendrons and dendrimers skeleton-constructed with azobenzene moiety based upon 4-carboxy-4′-(1,2-propanediolether)-azobenzene as an AB₂ monomer, via a convergent approach, proceeding in a repeated stepwise growth manner starting from 4-carboxy-4′-(n-butylether)-azobenzene as a peripheral monomer, were synthesized, and characterized by NMR, FTIR, and MALDI-TOF-MS analysis. Their regular molecular architecture and thus monodispersed molecular weights were confirmed by GPC. The UV-Vis absorbance and ¹H NMR spectrum study indicated that the azobenzene moieties in CHCl₃ solution took fully trans-cis isomerization under UV irradiation, and reversely isomerization back to the trans by visible light irradiation or by heat.     

A visible light responsive azobenzene‐functionalized polymer: Synthesis,self‐assembly,and photoresponsive properties

A novel visible light responsive random copolymer consisting of hydrophobic azobenzene‐containing acrylate units and hydrophilic acrylic acid units has been prepared. The azobenzene molecule bearing methoxy groups at all four ortho positions is readily synthesized by one‐step conversion of diazotization. The as‐prepared polymer can self‐assemble into nanoparticles in water due to its amphiphilic nature. The tetra‐o‐methoxy‐substituted azobenzene‐functionalized polymer can exhibit the trans‐to‐cis photoswitching under the irradiation with green light of 520 nm and the cis‐to‐trans photoswitching under the irradiation with blue light of 420 nm in both solution and aggregate state. The morphologies of the self‐assembled nanoparticles are revealed by TEM and DLS. The controlled release of loaded molecules from the nanoparticles can be realized by adjusting pH value since the copolymer possesses pH responsive acrylic acid groups. The fluorescence of loaded Nile Red in the nanoparticles can be tuned upon the visible light irradiation. The reversible photoswitching of the azobenzene‐functionalized polymer under visible light may endow the polymer with wide applications without using ultraviolet light at all. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2768–2775     

Photoinduced switching in self-assembled multilayers of azobenzene-containing ionene polycations and anionic polyelectrolytes

Ultrathin molecular assemblies of new ionene polysoaps bearing azobenzene units in the main chain and anionic polyelectrolytes have been prepared upon electrostatic layer-by-layer adsorption on charged substrates. Ionenes could be adsorbed in the trans- and cis-rich state of their azobenzene units. Use of cis-rich polymer was found to be advantageous because up to three times more material could be adsorbed per dipping cycle as from the solution of the trans polymer. Alternate irradiation with UV (<370 nm) and visible (>450 nm) light allowed to switch between the trans isomer and the cis-rich photostationary state. Photoconversion of ionenes in multilayers is lower than in solution, but higher than for multilayers of azobenzene bolaamphiphiles reported recently.     

Changes in the sol-gel transformation behavior of azobenzene moiety-containing methylcellulose irradiated with UV light

Azobenzene moiety-containing methylcellulose (AB-MC) was prepared, the changes of the cloud point of its aqueous solutions as a thermotropic sol-gel transformation behaviour were investigated under irradiation with UV light. AB-MC's with degrees of substitution by the azobenzene moiety DS_AB > 2,5 · 10^-2 were insoluble in water. The azobenzene moiety in the AB-MC was confirmed to be reversibly isomerized from the trans- to the cis-form under irradiation with UV light of wavelengths 390 > λ > 310 nm and from the cis-to the trans-form under irradiation with visible light of λ > 400 nm. The cloud point value of the aqueous solution of AB-MC increased under irradiation with UV light of 390 > λ > 310 nm for the AB-MC's with a DS_AB value in a certain range and the extent of the increase in the cloud point value was higher at higher concentrations of AB-MC.     

Photoinduced swelling control of amphiphilic azoaromatic polymer membrane

To control the swelling of polymer membrane by photoirradiation amphiphilic azoaromatic polymer membranes were prepared and a photoinduced change in the swelling degree of water was investigated. The azobenzene moiety in the side chain of the polymer was isomerized from trans form to cis form by ultraviolet (UV) irradiation and reverse isomerization was found by visible light irradiation. The swelling degree of the polymer membrane for water in the dark was decreased by UV radiation, and when visible light irradiation was carried out in the polymer membrane the degree of swelling recovered to the original level. The swelling degree decreased with an increase in the mole fraction of the azobenzene moiety in the dark and under UV irradiation. The deswelling degree of the polymer membrane by UV irradiation also decreased with an increase in the mole fraction of the azobenzene moiety. This reversible change in the swelling degree was considered to be caused by the photoisomerization of the azobenzene moiety in the polymer membrane.     

Unusual photo-induced behaviour in a side chain liquid crystalline azo-polyester

An unusual behaviour has been observed in the photo-induced response of an azobenzene side chain liquid crystalline polyester (P6d4). Room temperature irradiation with linearly polarised 488 nm light does not induce any birefringence (Δn) in films of this polymer that have been quenched from the isotropic state. However, using the same irradiation conditions Δn is induced in quenched films that have been kept in darkness for a few minutes. Besides, no photo-induced Δn is observed in films irradiated with 488 nm light that have been previously irradiated with UV light. In this case, Δn can be recorded if the UV irradiated films have been kept in darkness for several hours. In another set of experiments performed with the P6d4 polymer, irradiation with high intensity linearly polarised 488 nm light induces an initial increase of Δn and then it goes back to zero. Subsequent irradiation with linearly polarised 633 nm light induces an orientation of the azobenzene chromophores perpendicular to the polarisation of the 488 nm light and independent of the 633 nm light polarisation direction. These results are very different from those obtained in other side chain polyesters which only differ from P6d4 in the end substituent. The anomalous behaviour of P6d4 is discussed in terms of a supercooling effect of the isotropic phase, the trans to cis back isomerization, the trans aggregation kinetics and a memory effect associated with the main chain orientation.     

Photoswitched Cell Adhesion on Azobenzene‐Containing Self‐Assembled Films

Stimuli‐responsive surfaces that can regulate and control cell adhesion have attracted much attention for their great potential in diverse biomedical applications. Unlike for pH‐ and temperature‐responsive surfaces, the process of photoswitching requires no additional input of chemicals or thermal energy. In this work, two different photoresponsive azobenzene films are synthesized by chemisorption and electrostatic layer‐by‐layer (LbL) assembly techniques. The LbL film exhibits a relatively loose packing of azobenzene chromophores compared with the chemisorbed film. The changes in trans/cis isomer ratio of the azobenzene moiety and the corresponding wettability of the LbL films are larger than those of the chemisorbed films under UV light irradiation. The tendency for cell adhesion on the LbL films decreases markedly after UV light irradiation, whereas adhesion on the chemisorbed films decreases only slightly, because the azobenzene chromophores stay densely packed. Interestingly, the tendency for cell adhesion can be considerably increased on rough substrates, the roughness being introduced by use of photolithography and inductively coupled plasma deep etching techniques. For the chemisorbed films on rough substrates, the amount of cells that adhere also changes slightly after UV light irradiation, whereas, the amount of cells that adhere to LbL films on rough substrates decreases significantly.     

A Novel pH/Light‐Triggered Surface for DNA Adsorption and Release

A simple strategy for the immobilization of Cy3‐labeled single strand DNA (Cy3‐ssDNA) on a Si(001) surface and its release under control of both light and pH stimuli is presented. In order to prepare a dual pH/light‐triggered surface, positively chargeable azobenzene molecules are self‐assembled on the Si(001) surface. The surface wettability of this substrate can be changed under influence of both light and pH conditions. The substrates can be positively charged under mildly acidic conditions. The pH‐sensitive behavior of the film allows binding of Cy3‐ssDNA on the functionalized Si(001) surface through e?ective electrostatic interactions with the negatively charged polynucleotide backbone. Moreover, irradiation of the film with UVA light induces trans–cis isomerization of the azobenzene units on the surface. As a result, the binding a?nity for DNA decreases due to the changing surface hydrophilicity. In order to understand and control the reversible photoswitchable mechanism of this surface, water contact angles are measured after UVA and visible light irradiation. The release of DNA from a dual pH/light‐sensitive sample is performed using fluorescence microscopy. The results show that irradiation of the film with UVA light induces trans–cis isomerization of the photoresponsive azobenzene units; this leads to significant changes in the surface hydrophilicity and reduces the binding affinity for DNA.     

Photoisomerizable and Thermoresponsive N‐isopropylacrylamide–Surfmer Copolymer Hydrogels Prepared upon Electrostatic Self‐Assembly of an Azobenzene Bolaamphiphile

Photoreactive and thermoresponsive N‐isopropylacrylamide (NIPAM)–surfmer copolymer hydrogels containing 4,4′‐di(6‐sulfato‐hexyloxy)azobenzene (DSHA) dianions are described. The functional hydrogels are obtained in a two steps. First a micellar aqueous solution of (11‐(acryloyloxy)undecyl)trimethylammonium bromide (AUTMAB) and NIPAM is exposed to ⁶⁰Co‐gamma irradiation, and a thermoresponsive copolymer gel is obtained. Second, DSHA is included by shrinking the gel at 50 °C and subsequent reswelling in an aqueous solution of DSHA disodium salt at 20 °C. Reswelling is accompanied by electrostatic adsorption of DSHA dianions at the positively charged AUTMAB headgroups replacing the bromide ions. Gels containing trans‐DSHA are transparent yellow at room temperature (λ_max = 370 nm), while gels containing cis‐rich DSHA are orange (λ_max = 460 and 330 nm). Energy dispersive X‐ray measurements indicate that 41% of the bromide ions are exchanged if trans‐DSHA is used for adsorption, and only 7.5% if cis‐DSHA is used. The incorporation of DSHA lowers the lower critical solution temperature (LCST) from 34 to 32 °C. Below the LCST, DSHA can be switched from the trans‐ to the cis‐rich state and vice versa upon irradiation with UV (λ = 366 nm) or visible light (λ ≥ 450 nm). Above the LCST no photoreaction takes place.     

Water‐soluble triply‐responsive homopolymers of N,N‐dimethylaminoethyl methacrylate with a terminal azobenzene moiety

Novel water‐soluble triply‐responsive homopolymers of N,N‐dimethylaminoethyl methacrylate (DMAEMA) containing an azobenzene moiety as the terminal group were synthesized by atom transfer radical polymerization (ATRP) technique. The ATRP process of DMAEMA was initiated by an azobenzene derivative substituted with a 2‐bromoisobutyryl group (Azo‐Br) in the presence of CuCl/Me₆TREN in 1,4‐dioxane as a catalyst system. The molecular weights and their polydispersities of the resulting homopolymers (Azo‐PDMAEMA) were characterized by gel permeation chromatography (GPC). The homopolymers are soluble in aqueous solution and exhibit a lower critical solution temperature (LCST) that alternated reversibly in response to Ph and photoisomerization of the terminal azobenzene moiety. It was found that the LCST increased as pH decreased in the range of testing. Under UV light irradiation, the trans‐to‐cis photoisomerization of the azobenzene moiety resulted in a higher LCST, whereas it recovered under visible light irradiation. This kind of polymers should be particularly interesting for a variety of potential applications in some promising areas, such as drug controlled‐releasing carriers and intelligent materials because of the multistimuli responsive property. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2564–2570, 2010     

Polarized spectroscopy of hybrid materials of chiral Schiff base cobalt(II), nickel(II), copper(II), and zinc(II) complexes and photochromic azobenzenes in PMMA films

A chiral Schiff base complex, bis(N-R-1-phenylethyl-3,5-dichlorosalicydenaminato) cobalt(II) was prepared newly and characterized to be a distorted tetrahedral trans-[CoN₂O₂] coordination geometry. Organic/inorganic hybrid materials containing the related cobalt(II), nickel(II), copper(II), and zinc(II) complexes and photochromic azobenzene in polymethylmethacrylate (PMMA) cast films were assembled for comparison of their flexibility and molecular arrangement in the photofunctional medium. Characterization of each component and hybrid materials was carried out by means of absorption and CD spectra and thermal analysis (TG–DTA and DSC). Moreover, we have attempted to observe changes of conformation and/or molecular arrangement of the complexes or azobenzene induced by cis–trans photoisomerization of azobenzene after alternate irradiation of polarized UV and visible light. Gradual increase of optical anisotropy was observed for all the hybrid materials regardless of flexibility of Schiff base complexes, and the degree of dichroism and weak intermolecular interactions were discussed based on polarized absorption electronic spectra.     

Photocontrolled Phase Transitions and Reflection Behaviors of Smectic Liquid Crystals by a Chiral Azobenzene

The photocontrolled phase transitions and reflection behaviors of a smectic liquid crystal, 4‐octyl‐4′‐cyanobiphenyl (8CB), tuned by a chiral azobenzene, are systematically investigated. For the smectic 8CB doped with the chiral azobenzene (1R)‐(?)‐4‐n‐hexyl‐4′‐menthylazobenzene (ABE), the initial smectic phase can be switched to cholesteric and then to isotropic upon UV irradiation due to the trans‐to‐cis photoisomerization of ABE; however, no reflection band is observed. For the smectic 8CB doped with ABE and the chiral agent (S)‐(?)‐1,1′‐binaphthyl‐2,2′‐diol (BN), a reflection band located in the short‐wavelength infrared region is observed, which disappears after further UV irradiation. For the smectic 8CB doped with ABE and a chiral agent with higher helical twisting power, (S)‐2,2′‐methylendioxy‐1,1′‐binaphthalene (DBN), a phototunable system with cholesteric pitch short enough to reflect visible light is demonstrated. With a given concentration of the chiral dopant DBN, a reversible reflection color transition is realized tuned by the isomerization of azobenzene. The reverse phase transition from isotropic to cholesteric and then to smectic can be recovered upon visible irradiation. The photocontrolled phase transitions in smectic liquid crystals and the corresponding changes in reflection band switched by photoisomerization of azobenzene may provide impetus for their practical application in optical memories, displays, and switches.     

Photochemical behavior in azobenzene having acidic groups. Preparation of magnetic photoresponsive gels

The photochemistry of three azobenzenes representing contrasting photochemical behaviors is described in the present work. Thus, Methyl Orange (MO, 4-[[(4-dimethylamino)phenyl]-azo]benzenesulfonic acid sodium salt, hereinafter (1) and 4-hydroxyazobenzene-4′-sulfonic acid (2) undergo in water fast photochemical proton shift, with decays in the microsecond timescale. In contrast to the previous cases, azobenzene-4,4′-dicarboxylic acid (3) undergoes photoisomerization in water. This photochemical behavior allows the preparation of aqueous gels with Aerosil as gelating agent (5% weight) exhibiting high cyclability and photoreversible isomerization of the trans to cis (300 nm irradiation) and cis to trans (visible white light irradiation). Gels containing azobenzene 3 as photoresponsive molecule and well-dispersed magnetite (Fe₃O₄) nanoparticles exhibit simultaneously high photoresponse and magnetic properties. Photoisomerization of compound 3 in these gels leads to small but reliable changes (25 G coercive field) in the magnetic hysteresis loop of magnetite nanoparticles. This novel concept of optical modulation of magnetism in iron oxide nanoparticles paves the way for the study of new systems, with a stronger coupling between trans–cis photoisomerization and magnetic properties.     

Insulin release behavior of poly(N-isopropylacrylamide-co-N-vinyl-2-pyrrolidone) hydrogel based on modified melamine crosslinkers

Novel hydrogels based on poly(N-isopropylacrylamide-co-N-vinyl-2-pyrrolidone) (PNIPAAm/PNVP), were synthesized by solution radical polymerization using water as solvent and different weight percentage of crosslinkers ranging from 0.5 to 4%. The monomer mol ratios of NIPAAm/VP (0.9/0.1, 0.5/0.5, and 0.1/0.9) were used in all cases. N,N′-methylenebisacrylamide (MBA) and the new synthesized N,N,N-triacrylamido melamine (MAAm) were used as crosslinkers. The swelling parameters such as the swelling ratio Q, equilibrium water content (EWC), volume fraction of polymer φ_p and volume fraction at crosslinking φ_r were calculated from swelling measurements at different temperatures. The lower critical solution temperatures (LCST) of the prepared hydrogels were measured using DSC technique. The data of LCST indicated that the NIPAAm/VP crosslinked with MAAm or MBA showed reversible swelling and shrinking with temperature changes. The temperature dependence of swelling ratio and response kinetics upon heating or cooling was also investigated to understand the smart properties, i.e., temperature sensitive properties of these smart hydrogels. The in vitro release experiments were carried out at 22 and 37°C, respectively, to investigate the effect of temperature-sensitive property of these PNIPAAm/PNVP hydrogels crosslinked with MAAm and MBA crosslinkers on insulin release profiles.     

Photo-induced control of bubble domains in chiral–nematic liquid crystal by a violet laser beam

The stable bubble domains generated by mixing 10% of chiral molecules into an azobenzene liquid crystal (LC)-doped nematic host can be optically controlled by a violet laser beam (415 nm). The photon-induced reversible trans–cis photo-isomerisation of azobenzene changes the helical twisting power (HTP) of LC mixtures in which the HTP of cis-azobenzene LC is lower than trans-azobenzene LC. Under the irradiation of an optical field (>20 mW cm^???2), the helical pitch distance, which is inverted proportional to the HTP, increases and the bubble domains disappear. Immediate obstruction of laser light irradiation initiates cholesteric nucleation, merging of domains and the subsequent generation of stably dispersed bubble domains.     

Robust polyazobenzene microcapsules with photoresponsive pore channels and tunable release profiles

Monodisperse silica particles coated with azobenzene polymer (PAzo) shell were synthesized through distillation precipitation polymerization. Robust PAzo microcapsules were obtained after selective removal of the silica templates by hydrofluoric acid (HF) etching. These PAzo microcapsules, confirmed by transmission electron microscopy (TEM) investigation, had excellent reversible photoisomerization with transformation between trans and cis isomers under ultraviolet (UV) and visible lights. Due to their compatibility with PAzo, acetonitrile would be trapped in the network of the shell during polymerization. Pore channels in the shell, confirmed by nitrogen adsorption–desorption test, would be produced after acetonitrile evaporation. Loading and release of rhodamine B (RhB) molecules in PAzo microcapsules were carried out and indicated that cis azobenzene showed larger pore diameter (named as “open switch”) under UV light which favored permeation of RhB molecules, while trans structure (named as “closed switch”) under visible light slowed down the process. In addition, both release profiles obeyed pure Fickian diffusion with a power law of t^0.42. Diffusion coefficient of RhB from PAzo microcapsules under visible light (1.47 × 10^?12 cm²/s) was lower than that under UV light (2.12 × 10^?12 cm²/s).     

Control of the Orientation and Photoinduced Phase Transitions of Macrocyclic Azobenzene

Photoinduced phase transitions caused by photochromic reactions bring about a change in the state of matter at constant temperature. Herein, we report the photoinduced phase transitions of crystals of a photoresponsive macrocyclic compound bearing two azobenzene groups ( 1 ) at room temperature on irradiation with UV (365 nm) and visible (436 nm) light. The trans/trans isomer undergoes photoinduced phase transitions (crystal–isotropic phase–crystal) on UV light irradiation. The photochemically generated crystal exhibited reversible phase transitions between the crystal and the mesophase on UV and visible light irradiation. The molecular order of the randomly oriented crystals could be increased by irradiating with linearly polarized visible light, and the value of the order parameter was determined to be ?0.84. Heating enhances the thermal cis‐to‐trans isomerization and subsequent cooling returned crystals of the trans/trans isomer.     

Photo-modulation of supramolecular polymorphism in the self-assembly of a scissor-shaped azobenzene dyad into nanotoroids and fibers

Recent advances in the research field of supramolecularly engineered dye aggregates have enabled the design of simple one-dimensional stacks such as fibers and of closed structures such as nanotoroids (nanorings). More complex and advanced supramolecular systems could potentially be designed using a molecule that is able to provide either of these distinct nanostructures under different conditions. In this study, we introduced bulky but strongly aggregating cholesterol units to a scissor-shaped azobenzene dyad framework, which affords either nanotoroids, nanotubes, or 1D fibers, depending on the substituents. This new dyad with two trans-azobenzene arms shows supramolecular polymorphism in its temperature-controlled self-assembly, leading to not only oligomeric nanotoroids as kinetic products, but also to one-dimensional fibers as thermodynamic products. This supramolecular polymorphism can also be achieved via photo-triggered self-assembly, i.e., irradiation of a monomeric solution of the dyad with two cis-azobenzene arms using strong visible light leads to the preferential formation of nanotoroids, whereas irradiation with weak visible light leads to the predominant formation of 1D fibers. This is the first example of a successful light-induced modulation of supramolecular polymorphism to produce distinctly nanostructured aggregates under isothermal conditions.

Introduction of the bulky yet strongly aggregating cholesterol units to an azobenzene dyad lead to a supramolecular polymorphism not only in its temperature-controlled but also in photo-triggered self-assembly, leading to toroids and helical fibers.     

Preparation of fast response superabsorbent hydrogels by radiation polymerization and crosslinking of N-isopropylacrylamide in solution

Macroporous temperature-responsive poly(N-isopropylacrylamide) (PNIPAAm) hydrogels with high equilibrium swelling and fast response rates were obtained by a ⁶⁰Co γ- and electron beam (EB) irradiation of aqueous N-isopropylacrylamide (NIPAAm) monomer solutions. The effect of irradiation temperatures, the dose, the addition of a pore-forming agent on the swelling ratio, and the kinetics of swelling and shrinking of the PNIPAAm gels was studied. The gels synthesized above the LCST exhibited the highest equilibrium swelling (300–400) and fastest response rate measured by minutes. Scanning electron microscope (SEM) pictures revealed that the gels synthesized above the LCST have larger pores than those prepared at temperatures below the LCST. The gels showed a reversible response to cyclical changes in temperature and might be used in a pulsed drug delivery device. The gels synthesized above the LCST exhibited the highest testosterone propionate release.     

Photon control of liquid motion on reversibly photoresponsive surfaces

The movement of a liquid droplet on a flat surface functionalized with a photochromic azobenzene may be driven by the irradiation of spatially distinct areas of the drop with different UV and visible light fluxes to create a gradient in the surface tension. In order to better understand and control this phenomenon, we have measured the wetting characteristics of these surfaces for a variety of liquids after UV and visible light irradiation. The results are used to approximate the components of the azobenzene surface energy under UV and visible light using the van Oss-Chaudhury-Good equation. These components, in combination with liquid parameters, allow one to estimate the strength of the surface interaction as given by the advancing contact angle for various liquids. The azobenzene monolayers were formed on smooth air-oxidized Si surfaces through 3-aminopropylmethyldiethoxysilane linkages. The experimental advancing and receding contact angles were determined following azobenzene photoisomerization under visible and ultraviolet (UV) light. Reversible light-induced advancing contact-angle changes ranging from 8 to 16 degrees were observed. A large reversible change in contact angle by photoswitching of 12.4 degrees was achieved for water. The millimeter-scale transport of 5 microL droplets of certain liquids was achieved by creating a spatial gradient in visible/UV light across the droplets. A criterion for light-induced motion of droplets is shown to be consistent with the response of a variety of liquids. The type of light-driven fluid movement observed could have applications in microfluidic devices.