Effect of hydrotropic salt on the assembly transitions and rheological responses of cationic gemini surfactant solutions

Cationic gemini surfactant dimethylene-1,2-bis(dodecyldiethylammonium bromide), referred to as C12C2C12(Et), was synthesized. The effect of sodium salicylate (NaSal) on the assembly formation and transition of this cationic gemini surfactant solution was studied. Addition of NaSal induced rich aggregate morphologies in the C12C2C12(Et) system. The microstructures and rheological responses resulting from the addition of NaSal were studied systematically to explore the interaction between gemini surfactants and hydrotropic salts. The rich aggregation behavior can be attributed to the special molecular structure of the gemini surfactant and the appropriate interaction between the surfactant and NaSal. The study of gemini surfactant and hydrotropic salt interaction brings promise for applications in materials synthesis as soft templates.     

Effects of additional salts on the interfacial tension of crude oil/zwitterionic gemini surfactant solutions

Zwitterionic gemini surfactants, which have the advantages of both zwitterionic and gemini surfactants, have been widely used in various disciplines. Sulfobetaine-type zwitterionic gemini surfactants consisting of 1,2-bis[N-methyl-N-(3-sulfopropyl)-alkylammonium]ethane (2C_nSb with 6, 8 and 10 carbon atoms) were evaluated for their interfacial activities at the water/crude oil interface. The 2C₁₀Sb molecules showed a remarkable ability to decrease the interface tension (IFT) of water/crude oil, and the degree of decrease was much greater than those in either zwitterionic or gemini surfactant systems by at least two orders of magnitude. Furthermore, the effects of salts (NaCl, CaCl₂, and MgCl₂) on the IFT of the 2C₁₀Sb system were thoroughly investigated. Interestingly, the delicate balance between the effects of additional cations and the intramolecular interactions of 2C₁₀Sb molecules played crucial roles in the interfacial arrangements of 2C₁₀Sb molecules, which were mainly dependent on the bonding abilities of the cations. Moreover, a zwitterionic surfactant and a cationic gemini surfactant were employed in control experiments to verify the proposed mechanisms.     

新型腰果酚双子表面活性剂的合成及表面活性

以天然生物质腰果酚、1,3-二溴丙烷及氯磺酸为原料,通过醚化、磺化及中和三步反应合成了一类新型的腰果酚基磺酸盐双子(Gemini)表面活性剂.采用傅立叶转换红外光谱仪和核磁共振谱仪表征了产物的结构;采用滴体积法测定了腰果酚Gemini表面活性剂的表面张力,研究了水溶液的表面性质,并与相应的单基腰果酚基磺酸盐表面活性剂进行了对比.结果表明:腰果酚Gemini表面活性剂水溶液的临界胶束浓度(cmc)为6.20×10-2 mmol.L-1,远小于相应的单基腰果酚表面活性剂水溶液的cmc(8.40mmol.L-1);其临界表面张力γcmc为36.92mN.m-1,与单基腰果酚表面活性剂水溶液的相近(γcmc为38.41mN.m-1).与此同时,腰果酚Gemini表面活性剂水溶液的最小分子截面积Amin为0.27nm2,比相应的单基表面活性剂水溶液的小得多.     

Direct electron-transfer of myoglobin within a new zwitterionic gemini surfactant film and its analytical application for H2O2 detection

The direct electron-transfer of myoglobin in a new zwitterionic gemini surfactant film with glassy carbon electrode surface has been investigated. A pair of well-defined and quasi-reversible voltammetric peaks was observed at −0.34 and −0.30 V due to the direct electron-transfer of the redox couple of Mb (Fe^III/Fe^II). The voltammetric responses of myoglobin–surfactant film under different pH and scan rate conditions were obtained. The presence of hydrogen peroxide changed the typical electrochemical behaviors in terms of bioelectrocatalysis of myoglobin to hydrogen peroxide, and a higher sensitive electroanalytical method for the determination of hydrogen peroxide has been developed.     

Rheology of novel self-thickening cationic gemini surfactant solutions

A new cationic Gemini surfactant (25-HP-25) was synthesized with eruamidopropyl dimethylamine and epichlorohydrin, and its solution is self-thickening. The rheological properties of 25-HP-25 and 3-chloro-2-hydroxypropyl eruamidopropyl dimethyl ammonium acetate (EDAA) solutions were compared. The solution of EDAA behaves as Newtonian fluid (1?s^?1??1). Whereas the 25-HP-25 micelle solution (2?wt%) exhibits higher viscosity, which is about three hundred times than that of EDAA solution at low shear rate (γ??1). Especially, the 25-HP-25 solution shows obvious thixotropy, and with the increase of concentration, the viscoelasticity becomes better. Furthermore, the compaction of network structures has been confirmed by cryo-field emission scanning electron microscopy (cryo-FESEM) micrographs. This work is expected to enrich the research field of self-thickening surfactant.     

Interaction between a novel gemini surfactant and cyclodextrin: NMR and surface tension studies

The interaction between cyclodextrins, hydroxypropyl-beta-cyclodextrin (HPbetaCD), and hydroxypropyl-gamma-cyclodextrin (HPgammaCD) and a novel type of nonionic surfactant synthesized from a fatty acid has been investigated. The so-called nonionic heterogemini surfactant (NIHG750) contains two hydrophobic groups and two hydrophilic groups, composed of one monomethyl ethylene glycol and one secondary OH group, CH(3)(CH(2))(7)-CH[OH]-CH[O(CH(2)CH(2)O)(16)CH(3)]-(CH(2))(7)CN. Surface tension studies indicate that micelles form in NIHG750 systems in both the presence and the absence of small quantities (molar ratio (HPbetaCD:NIHG750) approximately 2) of cyclodextrin (HPbetaCD or HPgammaCD). This gives NIHG surfactants an advantage compared to single-tailed nonionic surfactants, which generally lose their ability to micellize at much lower additions of cyclodextrins. However, the interaction between HPbetaCD and NIHG750 results in a disruption of the micellar aggregates at higher levels of cyclodextrin. In the dilute systems (C(NIHG750)<0.1% (w/w) approx) prolate-shaped mixed aggregates (HPbetaCD and NIHG750) form, with a short and a long axis of the order of 8-9 and 17-20 A, respectively. These gradually aggregate into micellar-like structures at higher concentrations. In the aqueous bulk phase HPbetaCD interacts mainly with the hydrophobic part of NIHG750, but both NMR and surface tension measurements indicate that an interaction with the hydrophilic part of NIHG750, as well, may exist. This interaction results in a better packing of NIHG750 at air-water interfaces. However, at elevated temperatures results from turbidity measurements indicate that NIHG750 and HPbetaCD interact mainly through the hydrophilic part of the surfactant; a decrease in the cloud point temperature is observed. The interaction of the larger cavity molecule, HPgammaCD, with NIHG750, on the other hand, seems to be relatively weak. The interaction, when present, most probably takes place through inclusion of the hydrophilic EO part of NIHG750. The results suggest that HPgammaCD in combination with NIHG750 is a better solubilizing system than with HPbetaCD.     

Conductometric study of the mixing behaviour of sodium benzoate and salicylate with an anionic surfactant sodium lauroylsarcosinate

Effects of two anionic hydrotropes – sodium benzoate (NaBz) and sodium salicylate (NaSal) – on the mixed-micelle formation with an amino-acid-based surfactant – sodium lauroylsarcosinate (SLS) – in water were investigated by the conductometric method. Specific conductivity was measured for SLS/NaBz/water and SLS/NaSal/water systems to determine the critical micelle concentration (cmc). Using the regular solution theory for non-ideal mixing, the pairwise interaction parameter, β₁₂, and micellar composition, χ, were estimated in the mixed micelle. The cmc values of the surfactant–hydrotropes mixtures were generally lower than those predicted from the ideal mixing theory. The β₁₂ values are generally negative for the two systems at all mole fractions with an average value of ?2.83 for the SLS/NaBz and ?3.31 for SLS/NaSal systems, respectively, indicative of a strong attractive interaction between the SLS/NaBz and SLS/NaSal mixed micelle. The calculated thermodynamic parameters of micellisation all indicated spontaneity in mixed-micelle formation for the systems studied.     

Properties of sodium phosphate-hydroxy ethanolamide gemini surfactant synthesized from the seed oil of Luffa cylindrical

The production of surfactant from biological and renewable sources is important as this reduces environmental hazards since the products are highly biodegradable. Oil extracted from the seed of Luffa cylindrica using hexane in a soxhlet extractor was used in the synthesis of sodium phosphate-hydroxy ethanolamide via a simple reaction mechanism. The progress of the reaction was monitored and confirmed by FTIR, ¹HNMR and ¹³CNMR. The process used gave a yield of 88.46% of sodium phosphate-hydroxy ethanolamide. The properties of this compound were compared with those of sodium dodecyl sulphate (SDS) used as a known reference surfactant. Important properties of sodium phosphate-hydroxy ethanolamide such as foam stability, wetting power and surface tension turned out superior to those of the known reference surfactant (SDS).      

Electric-field-driven surface aggregation of a model zwitterionic surfactant

Electrochemical measurements, atomic force microscopy, and scanning tunneling microscopy have been combined to describe the electric-field-controlled surface aggregation of N-dodecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (DDAPS), a model zwitterionic surfactant, at a Au(111) electrode surface. At concentrations below the critical micelle concentration (CMC), the monomer adsorbs and aggregates at the surface. The charge on the metal (sigmaM) controls the orientation of adsorbed molecules and consequently the film structure. At high negative (sigmaM < -5 microC cm-2) charge densities, a spongy, disordered film is formed in which the polar heads are turned toward the solution. At high positive (sigmaM > +5 microC cm-2) charge densities, a planar film with "blisters" is observed with the polar heads of DDAPS turned to the metal. Hemicylindrical aggregates are observed in the intermediate charge density range (-5 < sigmaM < +5 microC cm-2). At bulk concentrations higher than the CMC, micelles adsorb and the structure of these films is controlled by the fusion of the adsorbed micelles. STM and AFM images provided direct visualization of this field-driven surface aggregation of the zwitterionic surfactant.     

一种季铵盐双子表面活性剂的微波合成及性能研究

以四甲基丙二胺和溴代十二烷为原料,以异丙醇为溶剂,用微波辐射的方法反应合成一种季铵盐双子表面活性剂:二溴化-N,N′-二(二甲基十二烷基)丙二铵.研究了合成反应的最佳工艺条件:四甲基丙二胺与溴代十二烷的摩尔比为1.0∶ 2.2,反应时间为15分钟,反应温度为85℃,微波功率300W时,产率为70.55%.测定了不同浓度表面活性剂水溶液的表面张力,对产品的杀菌性能进行评价.结果表明:合成产品的临界胶束浓度为1.00mmol/L,杀菌率达100%时的药剂用量为40mg/L.     

Synthesis and characterisation of a novel surfactant, sodium geranyl sulphate

An anionic surfactant, sodium geranyl sulphate (sodium 3,7-dimethyl-2,6-octadienyl sulphate), was synthesised from the natural extracted monoterpenol, geraniol. The final product yield is 51.5% after recrystallisation. The cis/trans isomer reduced the surface tension of water to 33 ± 0 mN m⁻¹ and yielded a critical micelle concentration of 89 ± 7 mM.     

Aqueous two-phase system of an anionic gemini surfactant and a cationic conventional surfactant mixture

The aqueous two-phase system formed by the mixture of dodecyltrimethylammonium bromide (DTAB) with a gemini surfactant O,O′-bis(sodium 2-lauricate)-p-benzenediol (C₁₁pPHCNa) has been studied. Two two-phase regions were observed, one was a wide region in the cationic surfactant-rich side and the other in the vicinity of R = 1:1, where R is the mixing mole ratio of DTAB to C₁₁pPHCNa in global solution. Multi-lamellar vesicles are formed in the concentrated upper phase of cationic surfactant-rich systems and spherical aggregates in the concentrated bottom phase at R = 1:1. The microstructure of the solution and the phase behavior of the aqueous two-phase system strongly depended on the total concentration and the composition of the system.     

Study on the adsorption and aggregation of dilute gemini surfactant solutions

As a function of temperature in aqueous solutions, the adsorption and aggregation of N,N’-bis (tetradecyl dimethyl)-1,2-dibromide-ethanediyl ammonium salt (GS14-2-14) and N,N’-bis (hexadecyl dimethyl)-1,2-dibromide-ethanediyl ammonium salt (GS16-2-16), were researched with drop-volume technique and conductometry, respectively. The results of surface tension measurements, which were analyzed by originally developed thermodynamic equations, illustrate that GS14-2-14 has a better surface activity and arranges more tightly in the adsorbed film than GS16-2-16. The data of conductivity were used to find critical micelle concentration (cmc) and counterion binding degree of micelle (β). Thermodynamic parameters of micellization were also obtained from the temperature dependence of cmc values. From the study, it is discovered that the micellization process is spontaneous and exothermic in nature and it is mainly driven by entropy.     

Micellization of cationic gemini surfactant and its interaction with DNA in dilute brine

The micellization of cationic gemini surfactant trimethylene-1,3-bis (dodecyldimethylammonium bromide) (12-3-12·2Br) was investigated and critical micelle concentrations (CMC) and thermodynamic parameters were evaluated as functions of ionic strength and temperature. The micellization of 12-3-12·2Br is entropically driven and thermodynamically favored. Raising the temperature slightly increases the CMC, while increasing the ionic strength lowers the CMC. A multi-technique study of the 12-3-12·2Br/DNA interaction and its dependence on ionic strength, temperature and DNA concentration were presented. DNA with loose coil conformation, necklace-like structure, highly ordered toroidal aggregates and coexisting of large aggregates and small structures in DNA/12-3-12·2Br system were observed. Critical aggregation concentrations (CAC), interaction saturation concentrations (C(2)), and associated thermodynamic parameters were determined. The screening effect of salt decreases the DNA/12-3-12·2Br electrostatic attraction, but favors the formation of free 12-3-12·2Br micelles or aggregates on the DNA chain. DNA acts as a separate phase contacting with the surfactant molecules and therefore CAC is independent of DNA concentration. Increasing DNA concentration postpones the appearance of free micelle in bulk phase, consequently increases the C(2). Finally an interaction mechanism between 12-3-12·2Br and DNA was proposed.     

Spontaneous aggregate transition in mixtures of a cationic gemini surfactant with a double-chain cationic surfactant

Controllable aggregate transitions were realized by mixing two kinds of cationic surfactants, hexylene-1,6-bis(dodecyldimethylammonium bromide) (C(12)C(6)C(12)Br(2)) and didodecyldimethylammonium bromide (DDAB). It was found that two parameters are the main factors determining the aggregation behavior of the mixed system, the total concentration of DDAB and C(12)C(6)C(12)Br(2) (C(T)), and the mole fraction of DDAB in the mixtures of DDAB and C(12)C(6)C(12)Br(2) (X(DDAB)). How these two parameters act on the aggregate transitions was studied in detail by various measurements including surface tension, turbidity, electrical conductivity, ζ potential, isothermal titration microcalorimetry, dynamic light scattering, cryogenic transmission electron microscopy, and (1)H NMR. When C(T) was constant, spontaneous vesicle-to-micelle transitions were found with decreasing X(DDAB) at high C(T). When X(DDAB) was constant, aggregate transitions were generated by gradually increasing C(T), depending on different X(DDAB) ranges. At X(DDAB) < 0.6, small spherical aggregates formed first and then transferred to vesicles, and finally the vesicles transitioned to micelles. At X(DDAB) ≥ 0.6, the progressive increase in C(T) led to aggregate transitions on the order of the arising of vesicles, the continuous growth of vesicles, the disruption of vesicles into micelles, and the final coexistence of vesicles and micelles. The hydrophobic interaction and electrostatic repulsion between DDAB and C(12)C(6)C(12)Br(2) together with the related degree of ionization and hydration of the surfactants were gradually adjusted by changing the ratio and the total concentration of these two surfactants, which should be responsible for the complicated aggregation behavior.     

Synthesis of a photoactive gemini surfactant and its use in AGET ATRP miniemulsion polymerisation and UV curing

A novel photoactive gemini surfactant was easily synthesised in high yields. The multi-functional molecule can be used as a gemini surfactant, a benzophenone type photoinitiator, and as an ATRP initiator. Poly(methyl methacrylate) (PMMA) and poly(methyl methacrylate)-block-poly(allyl methacrylate) (PMMA-b-PAMA) were prepared using the photoactive gemini surfactant as an ATRP initiator under soap-free miniemulsion polymerisation conditions. Kinetic results of the miniemulsion polymerisation of methyl methacrylate (MMA) indicate that the reaction has controlled/living characteristics. UV curing was performed by irradiation of the linear PMMA-b-PAMA polymer, in which PMMA-b-PAMA containing a benzophenone moiety functioned as a macromolecular photoinitiator.     

Thermodynamics of self-aggregation of mixed cationic gemini/sodium deoxycholate surfactant systems in aqueous solution

Journal of Thermal Analysis and Calorimetry - Thermodynamics of interaction between cationic gemini surfactants [C12H25(CH3)2N(CH2)sN(CH3)2C12H25]Br2, (s?=?2, 6 or 10, assigned as...     

Foaming in aqueous solutions of zwitterionic surfactant: Effects of oil and salts

This paper reports a study on the stability of foams generated from the aqueous solutions of the zwitterionic surfactant, N-Dodecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate, in presence of NaCl, CaCl₂ and AlCl₃. The effect of oil (i.e. n-hexane) on foam was also studied. The surface and interfacial tensions were measured. These tensions and the CMC decreased upon salt addition, signifying an increased adsorption of the surfactant molecules at the interface. The quantity of salt required for reducing the surface tension and CMC was in the sequence: NaCl > CaCl₂ > AlCl₃. The salts had a pronounced effect on the foaming characteristics, i.e. they reduced the initial foam volume. The effectiveness of salts in reducing the foam stability followed the sequence: AlCl₃ > CaCl₂ > NaCl. However, the foam collapse rate was reduced in the presence of salt. The presence of oil decreased the foam volume and reduced its stability. The entering, bridging, and spreading coefficients were calculated, which explained the stability of foams in presence of oil.     

Rheological and thermo-responsive characteristics of the mixed aqueous solution of gemini cationic surfactant and hydroxyl naphthalene carboxylic acid sodium

The new thermo-switchable wormlike micellar systems were developed by mixing the gemini cationic surfactant, 2-hydroxypropyl-1,3-bis (dimethylmyristylammonium chloride) (14-3(OH)-14(2Cl) and sodium 1-hydroxynaphthalene-2-carboxylate (1SHNC) and sodium 2-hydroxynaphthalene- 3-carboxylate (2SHNC) in a certain concentration range. Their viscoelastic and thermos-responsive behaviors as a function of the salts concentration or temperature were investigated via rheological and cryo-TEM investigations. The results demonstrated that the zero-shear viscosity (η₀) significantly increased while raising salt concentrations above a threshold concentration (C_S*) until reaching maximum and then decreased. For the mixed solutions before the maximum, the zero-shear viscosity linearly decreased with increasing temperature and conformed to the Arrhenius law. However, for those mixed systems displaying thermo-responsive characteristic after the summit, the curve of η₀ as a function of temperature exhibited a maximum over the whole temperature range, namely, the systems showed thermo-thickening and thermo-thinning behaviors at low and high temperatures. The abovementioned phenomena were explained by the formation of hydrogen bond in 14-3(OH)-14(2Cl) molecules and the different solubility of SHNC under different temperatures, and the transition mechanisms of the aggregates were analyzed accordingly.