| 波纹结构迎爆面泡沫金属对甲烷-空气混合气体爆炸能量的吸收特性 |
| |
| 引用本文： | 张保勇, 陶金, 崔嘉瑞, 张义宇, 王亚军, 韩永辉, 孙曼. 波纹结构迎爆面泡沫金属对甲烷-空气混合气体爆炸能量的吸收特性[J]. 爆炸与冲击, 2023, 43(11): 115401. doi: 10.11883/bzycj-2023-0084 |
| |
| 作者姓名： | 张保勇 陶金 崔嘉瑞 张义宇 王亚军 韩永辉 孙曼 |
| |
| 作者单位： | 黑龙江科技大学安全工程学院, 黑龙江 哈尔滨 150022 |
| |
| 基金项目： | 黑龙江省重点研发计划（GA21C023） |
| |
| 摘 要： | 为进一步探究气体爆炸荷载下异构迎爆面泡沫金属的吸能特性，在前期开展锯齿结构迎爆面材料吸能特性实验的基础上，以3种波纹结构迎爆面（凸面型、凹面型和凹凸连续型）泡沫金属材料为研究对象，利用自主搭建的气体爆炸管网实验平台，开展了该泡沫金属材料在甲烷-空气混合气体爆炸荷载下的吸能特性测定实验。采用不同波纹结构迎爆面阻隔爆材料，测定了管道内爆炸冲击波超压、火焰传播速度和火焰温度等随时间和空间的变化，分析了不同波纹结构迎爆面阻隔爆材料的吸能效果。结果表明：(1)迎爆面为波纹结构的泡沫金属材料对爆炸超压的衰减效果优于迎爆面为锯齿结构的泡沫金属材料和迎爆面为平面结构的泡沫金属材料，且迎爆面为凸面型波纹结构和凹凸连续型波纹结构的泡沫金属材料对超压衰减的速率高于迎爆面为锯齿结构和凹面型波纹结构的泡沫金属材料；迎爆面为锯齿结构的泡沫金属材料对火焰传播速度的衰减略强于迎爆面为波纹结构和平面结构的泡沫金属材料；迎爆面为波纹结构的泡沫金属材料对火焰温度的衰减效果优于迎爆面为锯齿结构及平面结构的泡沫金属材料。(2)在本文实验条件下，3种波纹结构（凸面型、凹面型和凹凸连续型）迎爆面泡沫金属材料的熄爆参数分别为5.338、4.340和6.090 MPa·℃，低于锯齿结构迎爆面材料的熄爆参数17.680 MPa·℃，且远低于熄爆参数安全值390 MPa·℃，波纹结构迎爆面材料具有良好的防护效果。(3)这3种迎爆面为波纹结构的泡沫金属材料均具有良好的吸能特性，均优于迎爆面为锯齿形结构的泡沫金属材料，且明显优于迎爆面为平面结构的泡沫金属材料。
|
| 关 键 词： | 迎爆面 泡沫金属 波纹结构 气体爆炸 阻隔爆能力 吸能 |
| 收稿时间： | 2023-03-07 |
| 修稿时间： | 2023-08-29 |
Absorption characteristics of methane-air mixture explosion energyby foam metal with a corrugated surface against explosion |
| |
| ZHANG Baoyong, TAO Jin, CUI Jiarui, ZHANG Yiyu, WANG Yajun, HAN Yonghui, SUN Man. Absorption characteristics of methane-air mixture explosion energyby foam metal with a corrugated surface against explosion[J]. Explosion And Shock Waves, 2023, 43(11): 115401. doi: 10.11883/bzycj-2023-0084 |
| |
| Authors: | ZHANG Baoyong TAO Jin CUI Jiarui ZHANG Yiyu WANG Yajun HAN Yonghui SUN Man |
| |
| Affiliation: | Department of Safety Engineering, Heilongjiang University of Science and Technology, Harbin 150022, Heilongjiang, China |
| |
| Abstract: | To further explore the energy absorption characteristics of the foamed metal with the explosion-facing surface structure different from that of its base subjected to a gas explosion, based on the previous experiments carried on the energy absorption characteristics of serrated structural materials, mixed methane-air explosion energy absorption tests were conducted by using the self-built gas explosion pipe network experimental platform. Three kinds of different corrugated foamed metals were chosen as the explosion-proof materials, and their explosion-facing surfaces took on full convex, full concave, and continuous concave/convex, respectively. The variations of the corresponding typical physical quantities with time and space were measured and analyzed, including explosion shock wave overpressure, flame propagation velocity, and flame temperature. Results are shown as follows. (1) The foamed metals with corrugated structures can reduce explosion overpressure more effectively than the ones with the serrated structure and plane structure, and the foamed metals with fully convex and continuous concave-convex corrugated structures can decrease the explosion shock wave overpressure faster than the ones with serrated and full-concave structures. Additionally, the foamed metals with serrated structures can slow the flame propagation velocity down slightly faster than the ones with the corrugated and plane structures. And the foamed metals with the corrugated structures can weaken the flame temperature more strongly than the ones with the serrated and plane structures. (2) The quenching parameters of the corrugated foam metals whose explosion-facing surfaces taking on full convex, full concave and continuous concave/convex are 5.338, 4.340 and 6.090 MPa·°C, respectively, which are lower than that of the one with the serrated explosion-facing surface 17.680 MPa·°C, and far lower than the safety value 390 MPa·°C, indicating that the foamed metals with the corrugated explosion-facing surface have better explosion-proof capabilities. (3) The energy absorption performances of the foamed metals with the corrugated explosion-facing surfaces are stronger than those of the ones with the serrated explosion-facing surfaces, and are obviously stronger than that of the one with the plane explosion-facing surface. In addition, the foamed metals with the corrugated explosion-facing surfaces can still keep intact after the experiments, displaying that their material strengths are higher than those of the ones with the serrated structures. |
| |
| Keywords: | explosion-facing surface foamed metal corrugated structure gas explosion explosion-proof capability energy absorption |
|
| 点击此处可从《爆炸与冲击》浏览原始摘要信息 |
|
点击此处可从《爆炸与冲击》下载全文 |
|
