| 基于裂纹附加模态Timoshenko梁的裂纹损伤识别 |
| |
| 引用本文： | 杨骁,蔡洪浩,戴缘. 基于裂纹附加模态Timoshenko梁的裂纹损伤识别[J]. 力学季刊, 2019, 40(1): 72-84. DOI: 10.15959/j.cnki.0254-0053.2019.01.009 |
| |
| 作者姓名： | 杨骁 蔡洪浩 戴缘 |
| |
| 作者单位： | 上海大学 土木工程系,上海,200444;上海大学 土木工程系,上海,200444;上海大学 土木工程系,上海,200444 |
| |
| 摘 要： | 将梁中横向裂纹等效为无质量扭转弹簧,并忽略其对梁剪切变形的影响,得到的具有任意裂纹数目Timoshenko梁自振模态的统一显示解析表达式.将裂纹梁的自振模态分为基本模态和裂纹附加模态,利用最小二乘拟合,建立了利用裂纹附加模态函数的梁裂纹损伤识别方法.通过数值模拟开展了简支单裂纹梁以及悬臂和固支双裂纹梁等的裂纹损伤识别,考察了测量误差对损伤识别的影响,数值结果表明本文所提出的裂纹损伤识别方法对裂纹位置的识别精度高于对裂纹损伤程度的识别精度;随着测量误差的增加,裂纹位置及裂纹损伤程度的识别误差增加,但仍在可接受的范围内,故该裂纹损伤识别方法在实际工程中具有一定的应用价值.
|
| 关 键 词： | Timoshenko裂纹梁 裂纹等效弹簧模型 裂纹附加模态 裂纹损伤识别 最小二乘拟合 |
Crack Damage Identification of Timoshenko Beam Based on the Additional Vibration Mode Induced by Crack |
| |
| YANG Xiao,CAI Honghao,DAI Yuan. Crack Damage Identification of Timoshenko Beam Based on the Additional Vibration Mode Induced by Crack[J]. Chinese Quarterly Mechanics, 2019, 40(1): 72-84. DOI: 10.15959/j.cnki.0254-0053.2019.01.009 |
| |
| Authors: | YANG Xiao CAI Honghao DAI Yuan |
| |
| Affiliation: | (Department of Civil Engineering, Shanghai University, Shanghai 200444, China) |
| |
| Abstract: | Regarding a transverse crack in a beam as a massless rotational spring and neglecting its influence on the shear deformation of beam, the unified explicit analytical expression of the vibration mode of Timoshenko beam with arbitrary number of cracks is obtained. The vibration modes of a cracked beam are then divided into the basic mode and the crack-induced additional mode, and a damage identification method of beam crack is established based on the crack-induced additional mode function through the least square fitting. Damage identifications of cracks of a simply-supported beam with single crack, cantilever and clamped-clamped beams with double cracks are carried out numerically, and the influence of measurement noise on the identification accuracy is examined. The numerical results show that, using the crack damage identification method presented in present paper, the identification accuracy of the crack position is higher than that of the crack damage degree. The identification errors of the positions and the damage degrees of the cracks increase with the increase of measurement errors, but are in acceptable range. Therefore, the proposed crack damage identification method is applicable for practical engineering. |
| |
| Keywords: | Timoshenko cracked beam equivalent spring model of crack crack-induced additional mode crack damage identification least square fitting |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《力学季刊》浏览原始摘要信息 |
|
点击此处可从《力学季刊》下载全文 |
|
