| 磷酸盐激光玻璃聚(CH3)2SiO/SiO2防潮膜改性研究 |
| |
| 引用本文： | 刘瑞军, 唐永兴, 朱健强. 磷酸盐激光玻璃聚(CH3)2SiO/SiO2防潮膜改性研究[J]. 强激光与粒子束, 2006, 18(02). |
| |
| 作者姓名： | 刘瑞军 唐永兴 朱健强 |
| |
| 作者单位： | 1.中国科学院 上海光学精密机械研究所 高功率激光物理国家实验室, 上海 201 800 |
| |
| 摘 要： | 采用溶胶-凝胶方法制备的(CH3)2Si(OC2H5)2预聚体涂膜液中，掺入碱催化的SiO2悬胶体涂膜液，采用旋涂法在掺钕磷酸盐激光玻璃棒端面涂制了改性的防潮膜。当涂膜液中(CH3)2Si(OC2H5)2和SiO2物质的量之比为1∶1时，热处理后的膜层耐摩擦性能明显改善；表面粗糙度的均方根值为1.245 nm；膜层激光破坏阈值大于15 J/cm2(1 053 nm，1 ns)；在80 ℃和95%RH的封闭环境中静置336 h，膜层的透过率、接触角基本不变。结果证明膜层具有稳定的疏水结构和很好的防潮性能，膜层强度增加，耐磨擦能力提高，膜层使用期延长。
|
| 关 键 词： | 防潮膜 溶胶-凝胶 有机硅 激光破坏阈值 |
Modification of di-ethoxy-silicane moisture-resistant films for neodymium-doped phosphate glass |
| |
| liu rui-jun, tang yong-xing, zhu jian-qiang. Modification of di-ethoxy-silicane moisture-resistant films for neodymium-doped phosphate glass[J]. High Power Laser and Particle Beams, 2006, 18. |
| |
| Authors: | liu rui-jun tang yong-xing zhu jian-qiang |
| |
| Affiliation: | 1. National Laboratory on High Power Laser and Physics,Shanghai Institute of Optics and Fine Mechanics,Chinese Academy of Sciences,P.O.Box 800-211,Shanghai 201800,China |
| |
| Abstract: | Using di-ethoxy-silicane as precursor, a colloidal prepolymer was developed from sol-gel process. With silica colloid as modifier, the modified moisture-resistant films were prepared on neodymium-doped phosphate glass by spin coating. When the mole ratio of di-ethoxy-silicane to silica was 1∶1, the films after cure had improved abrasion-resistance. RMS was 1.245 nm, while laser-damage threshold value more than 15 J/cm2 at the condition of 1 053 nm, 1 ns. After staying in a closed circumstance at 80 ℃ and 95%RH, the films had approximately constant transmission and contact angle. It indicates that the films have a stable hydrophobic structure, good moisture-resistance, improved abrasion-resistant feature and longer service life. |
| |
| Keywords: | moisture-resistance film sol-gel organic silicon laser-damaged threshold value |
|
| 点击此处可从《强激光与粒子束》浏览原始摘要信息 |
|
点击此处可从《强激光与粒子束》下载全文 |
