|
|||||
|
|
| 罗斯滤片法测量激光打靶X射线辐射通量 | |
| 引用本文： | 胡青元,杨军,甯家敏,甫跃成,杨建伦,陈法新,陈进川,李林波,杜卫星. 罗斯滤片法测量激光打靶X射线辐射通量[J]. 强激光与粒子束, 2014, 26(11): 112001. DOI: 10.11884/HPLPB201426.112001 |
| 作者姓名： | 胡青元 杨军 甯家敏 甫跃成 杨建伦 陈法新 陈进川 李林波 杜卫星 |
| 作者单位： | 1.中国工程物理研究院 核物理与化学研究所, 四川 绵阳 621 900 |
| 摘 要： | 利用一套罗斯滤片系统测量激光轰击固体金属Ti平面靶产生的X射线辐射通量,系统包括两个相同的X射线探测器及相应滤膜。罗斯滤片法的优点在于利用相邻核素对X射线相似的阻止率,可滤出一个窄的能带并去除高能部分的干扰,获得了Ti平面靶K壳层X光辐射产额。实验结果表明:硬X射线能段在4.5~4.9keV之间的K壳特征辐射占优,连续谱所占份额较低(与晶体谱仪一致);随着激光能量的增加,特征辐射增加;激光强度接近2×1015 W/cm2时,能量转换效率出现峰值。 |
| 关 键 词： | 罗斯滤片 X射线 能量转换效率 |
| 收稿时间： | 2014-04-29 |
Measurement of X-ray produced from laser irradiating solid target using Ross filter method |
|
| Affiliation: | 1.Institute of Nuclear Physics and Chemistry,CAEP,Mianyang 621900,China |
| Abstract: | Flux of X-ray produced from focussing laser radiation onto solid target was measured using a Ross filter system. The system consists of two identical X-ray detectors, appropriate filters mounted ahead of each detector. Ross filter method uses the advantages of the X-ray nuclide adjacent similar rejection, can filter out a narrow-band interference and remove high-energy part of the plane to get the Ti target K-shell X-ray radiation yield. Experiment result shows that k-shell emission of 4.5-4.9 keV prevails over continuum spectra (coincidence with result from crystal spectrometer). Characteristic emission increases with increased laser energy and a peak in conversion efficiency appears near 21015 W/cm2. |
| Keywords: | Ross filter X-ray energy conversion efficiency |
| 本文献已被 CNKI 等数据库收录！ | |
| 点击此处可从《强激光与粒子束》浏览原始摘要信息 | |
| 点击此处可从《强激光与粒子束》下载全文 | |