| 半导体多物理效应并行计算程序JEMS-CDS-Device设计与实现 |
| |
| 引用本文： | 李光荣, 赵振国, 王卫杰, 等. 半导体多物理效应并行计算程序JEMS-CDS-Device设计与实现[J]. 强激光与粒子束, 2020, 32: 043201. doi: 10.11884/HPLPB202032.190264 |
| |
| 作者姓名： | 李光荣 赵振国 王卫杰 游春光 周海京 |
| |
| 作者单位： | 1.中国工程物理研究院 高性能数值模拟软件中心，北京 100088;;2.北京应用物理与计算数学研究所，北京 100094;;3.中国工程物理研究院 复杂电磁环境科学与技术重点实验室，四川 绵阳 621900 |
| |
| 基金项目： | 科学挑战专题资助项目（TZ2018002）；国家自然科学基金项目（11675022）；中物院复杂电磁环境重点实验基金项目（FZ2019-001）；中国工程物理研究院创新发展基金项目（2019034）；国防基础科研计划项目（C1520110002） |
| |
| 摘 要： | 针对复杂电磁环境下器件多物理效应机理研究需求，研发了半导体多物理效应并行计算程序JEMS-CDS-Device。介绍了JEMS-CDS-Device的架构设计与实现技术。程序基于非结构网格并行框架JAUMIN实现，采用有限体积法（FVM）离散，使用牛顿法全耦合求解“电-载流子输运-热”问题。程序采用“内核＋算法库”形式架构，支持2维和3维非结构网格、千万自由度问题并行求解，支持物理方程、离散算法、材料物理模型等的扩展开发。
|
| 关 键 词： | 半导体数值模拟 漂移扩散模型 有限体积法 全耦合 自动微分 高性能计算 |
| 收稿时间： | 2019-06-25 |
| 修稿时间： | 2019-12-05 |
Design and implementation of semiconductor multi-physical parallel computing program JEMS-CDS-Device |
| |
| Li Guangrong, Zhao Zhenguo, Wang Weijie, et al. Design and implementation of semiconductor multi-physical parallel computing program JEMS-CDS-Device[J]. High Power Laser and Particle Beams, 2020, 32: 043201. doi: 10.11884/HPLPB202032.190264 |
| |
| Authors: | Li Guangrong Zhao Zhenguo Wang Weijie You Chunguang Zhou Haijing |
| |
| Affiliation: | 1. Software Center for High Performance Numerical Simulation, China Academy of Engineering Physics, Beijing 100088, China;;2. Institute of Applied Physics and Computational Mathematics, Beijing 100094, China;;3. Complicated Electromagnetic Environment Laboratory, China Academy of Engineering Physics, Mianyang 621900, China |
| |
| Abstract: | Aiming at the research requirements of multi-physical effects mechanism of devices in complex electromagnetic environment, a parallel computing program for semiconductor multi-physics effects, JEMS-CDS-Device, is developed. This paper introduces the architecture design and implementation technology of JEMS-CDS-Device. The program is based on the unstructured grid parallel framework—JAUMIN. It uses the finite volume method (FVM) to discretize and uses the Newton method to get fully coupled solution of the “electric-carrier transport-thermal” problem. The program which adopts the “kernel ＋ algorithm library” form architecture, supports 2D/3D unstructured mesh, and can solve problems of tens of millions of degrees of freedom parallelly. It supports extended development of physical effect equations, discrete algorithms, material physics models, etc. |
| |
| Keywords: | semiconductor numerical simulation drift-diffusion model finite volume method fully coupled automatic differentiation high performance computing |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《强激光与粒子束》浏览原始摘要信息 |
|
点击此处可从《强激光与粒子束》下载免费的PDF全文 |
